| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. |
| */ |
| #include <linux/init.h> |
| |
| #include <asm/cpu.h> |
| #include <asm/setup.h> |
| #include <asm/time.h> |
| #include <asm/irq.h> |
| #include <asm/mips-boards/generic.h> |
| |
| unsigned long cpu_khz; |
| |
| static int mips_cpu_timer_irq; |
| static int mips_cpu_perf_irq; |
| |
| static void mips_timer_dispatch(void) |
| { |
| do_IRQ(mips_cpu_timer_irq); |
| } |
| |
| static void mips_perf_dispatch(void) |
| { |
| do_IRQ(mips_cpu_perf_irq); |
| } |
| |
| static void __iomem *status_reg = (void __iomem *)0xbf000410; |
| |
| /* |
| * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect. |
| */ |
| static unsigned int __init estimate_cpu_frequency(void) |
| { |
| unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); |
| unsigned int tick = 0; |
| unsigned int freq; |
| unsigned int orig; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| orig = readl(status_reg) & 0x2; /* get original sample */ |
| /* wait for transition */ |
| while ((readl(status_reg) & 0x2) == orig) |
| ; |
| orig = orig ^ 0x2; /* flip the bit */ |
| |
| write_c0_count(0); |
| |
| /* wait 1 second (the sampling clock transitions every 10ms) */ |
| while (tick < 100) { |
| /* wait for transition */ |
| while ((readl(status_reg) & 0x2) == orig) |
| ; |
| orig = orig ^ 0x2; /* flip the bit */ |
| tick++; |
| } |
| |
| freq = read_c0_count(); |
| |
| local_irq_restore(flags); |
| |
| mips_hpt_frequency = freq; |
| |
| /* Adjust for processor */ |
| if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && |
| (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) |
| freq *= 2; |
| |
| freq += 5000; /* rounding */ |
| freq -= freq%10000; |
| |
| return freq ; |
| } |
| |
| void read_persistent_clock(struct timespec *ts) |
| { |
| ts->tv_sec = 0; |
| ts->tv_nsec = 0; |
| } |
| |
| static void __init plat_perf_setup(void) |
| { |
| if (cp0_perfcount_irq >= 0) { |
| if (cpu_has_vint) |
| set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); |
| mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; |
| } |
| } |
| |
| unsigned int get_c0_compare_int(void) |
| { |
| if (cpu_has_vint) |
| set_vi_handler(cp0_compare_irq, mips_timer_dispatch); |
| mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; |
| return mips_cpu_timer_irq; |
| } |
| |
| void __init plat_time_init(void) |
| { |
| unsigned int est_freq; |
| |
| est_freq = estimate_cpu_frequency(); |
| |
| pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000), |
| (est_freq % 1000000) * 100 / 1000000); |
| |
| cpu_khz = est_freq / 1000; |
| |
| mips_scroll_message(); |
| |
| plat_perf_setup(); |
| } |