| /* |
| * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. |
| * |
| * Authors: Shlomi Gridish <gridish@freescale.com> |
| * Li Yang <leoli@freescale.com> |
| * |
| * Description: |
| * QUICC Engine (QE) external definitions and structure. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #ifndef _ASM_POWERPC_QE_H |
| #define _ASM_POWERPC_QE_H |
| #ifdef __KERNEL__ |
| |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <asm/cpm.h> |
| #include <asm/immap_qe.h> |
| |
| #define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */ |
| #define QE_NUM_OF_BRGS 16 |
| #define QE_NUM_OF_PORTS 1024 |
| |
| /* Memory partitions |
| */ |
| #define MEM_PART_SYSTEM 0 |
| #define MEM_PART_SECONDARY 1 |
| #define MEM_PART_MURAM 2 |
| |
| /* Clocks and BRGs */ |
| enum qe_clock { |
| QE_CLK_NONE = 0, |
| QE_BRG1, /* Baud Rate Generator 1 */ |
| QE_BRG2, /* Baud Rate Generator 2 */ |
| QE_BRG3, /* Baud Rate Generator 3 */ |
| QE_BRG4, /* Baud Rate Generator 4 */ |
| QE_BRG5, /* Baud Rate Generator 5 */ |
| QE_BRG6, /* Baud Rate Generator 6 */ |
| QE_BRG7, /* Baud Rate Generator 7 */ |
| QE_BRG8, /* Baud Rate Generator 8 */ |
| QE_BRG9, /* Baud Rate Generator 9 */ |
| QE_BRG10, /* Baud Rate Generator 10 */ |
| QE_BRG11, /* Baud Rate Generator 11 */ |
| QE_BRG12, /* Baud Rate Generator 12 */ |
| QE_BRG13, /* Baud Rate Generator 13 */ |
| QE_BRG14, /* Baud Rate Generator 14 */ |
| QE_BRG15, /* Baud Rate Generator 15 */ |
| QE_BRG16, /* Baud Rate Generator 16 */ |
| QE_CLK1, /* Clock 1 */ |
| QE_CLK2, /* Clock 2 */ |
| QE_CLK3, /* Clock 3 */ |
| QE_CLK4, /* Clock 4 */ |
| QE_CLK5, /* Clock 5 */ |
| QE_CLK6, /* Clock 6 */ |
| QE_CLK7, /* Clock 7 */ |
| QE_CLK8, /* Clock 8 */ |
| QE_CLK9, /* Clock 9 */ |
| QE_CLK10, /* Clock 10 */ |
| QE_CLK11, /* Clock 11 */ |
| QE_CLK12, /* Clock 12 */ |
| QE_CLK13, /* Clock 13 */ |
| QE_CLK14, /* Clock 14 */ |
| QE_CLK15, /* Clock 15 */ |
| QE_CLK16, /* Clock 16 */ |
| QE_CLK17, /* Clock 17 */ |
| QE_CLK18, /* Clock 18 */ |
| QE_CLK19, /* Clock 19 */ |
| QE_CLK20, /* Clock 20 */ |
| QE_CLK21, /* Clock 21 */ |
| QE_CLK22, /* Clock 22 */ |
| QE_CLK23, /* Clock 23 */ |
| QE_CLK24, /* Clock 24 */ |
| QE_CLK_DUMMY |
| }; |
| |
| static inline bool qe_clock_is_brg(enum qe_clock clk) |
| { |
| return clk >= QE_BRG1 && clk <= QE_BRG16; |
| } |
| |
| extern spinlock_t cmxgcr_lock; |
| |
| /* Export QE common operations */ |
| #ifdef CONFIG_QUICC_ENGINE |
| extern void qe_reset(void); |
| #else |
| static inline void qe_reset(void) {} |
| #endif |
| |
| /* QE PIO */ |
| #define QE_PIO_PINS 32 |
| |
| struct qe_pio_regs { |
| __be32 cpodr; /* Open drain register */ |
| __be32 cpdata; /* Data register */ |
| __be32 cpdir1; /* Direction register */ |
| __be32 cpdir2; /* Direction register */ |
| __be32 cppar1; /* Pin assignment register */ |
| __be32 cppar2; /* Pin assignment register */ |
| #ifdef CONFIG_PPC_85xx |
| u8 pad[8]; |
| #endif |
| }; |
| |
| #define QE_PIO_DIR_IN 2 |
| #define QE_PIO_DIR_OUT 1 |
| extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, |
| int dir, int open_drain, int assignment, |
| int has_irq); |
| #ifdef CONFIG_QUICC_ENGINE |
| extern int par_io_init(struct device_node *np); |
| extern int par_io_of_config(struct device_node *np); |
| extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, |
| int assignment, int has_irq); |
| extern int par_io_data_set(u8 port, u8 pin, u8 val); |
| #else |
| static inline int par_io_init(struct device_node *np) { return -ENOSYS; } |
| static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; } |
| static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, |
| int assignment, int has_irq) { return -ENOSYS; } |
| static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| |
| /* |
| * Pin multiplexing functions. |
| */ |
| struct qe_pin; |
| #ifdef CONFIG_QE_GPIO |
| extern struct qe_pin *qe_pin_request(struct device_node *np, int index); |
| extern void qe_pin_free(struct qe_pin *qe_pin); |
| extern void qe_pin_set_gpio(struct qe_pin *qe_pin); |
| extern void qe_pin_set_dedicated(struct qe_pin *pin); |
| #else |
| static inline struct qe_pin *qe_pin_request(struct device_node *np, int index) |
| { |
| return ERR_PTR(-ENOSYS); |
| } |
| static inline void qe_pin_free(struct qe_pin *qe_pin) {} |
| static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {} |
| static inline void qe_pin_set_dedicated(struct qe_pin *pin) {} |
| #endif /* CONFIG_QE_GPIO */ |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); |
| #else |
| static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, |
| u32 cmd_input) |
| { |
| return -ENOSYS; |
| } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| |
| /* QE internal API */ |
| enum qe_clock qe_clock_source(const char *source); |
| unsigned int qe_get_brg_clk(void); |
| int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); |
| int qe_get_snum(void); |
| void qe_put_snum(u8 snum); |
| unsigned int qe_get_num_of_risc(void); |
| unsigned int qe_get_num_of_snums(void); |
| |
| static inline int qe_alive_during_sleep(void) |
| { |
| /* |
| * MPC8568E reference manual says: |
| * |
| * "...power down sequence waits for all I/O interfaces to become idle. |
| * In some applications this may happen eventually without actively |
| * shutting down interfaces, but most likely, software will have to |
| * take steps to shut down the eTSEC, QUICC Engine Block, and PCI |
| * interfaces before issuing the command (either the write to the core |
| * MSR[WE] as described above or writing to POWMGTCSR) to put the |
| * device into sleep state." |
| * |
| * MPC8569E reference manual has a similar paragraph. |
| */ |
| #ifdef CONFIG_PPC_85xx |
| return 0; |
| #else |
| return 1; |
| #endif |
| } |
| |
| /* we actually use cpm_muram implementation, define this for convenience */ |
| #define qe_muram_init cpm_muram_init |
| #define qe_muram_alloc cpm_muram_alloc |
| #define qe_muram_alloc_fixed cpm_muram_alloc_fixed |
| #define qe_muram_free cpm_muram_free |
| #define qe_muram_addr cpm_muram_addr |
| #define qe_muram_offset cpm_muram_offset |
| |
| /* Structure that defines QE firmware binary files. |
| * |
| * See Documentation/powerpc/qe_firmware.txt for a description of these |
| * fields. |
| */ |
| struct qe_firmware { |
| struct qe_header { |
| __be32 length; /* Length of the entire structure, in bytes */ |
| u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ |
| u8 version; /* Version of this layout. First ver is '1' */ |
| } header; |
| u8 id[62]; /* Null-terminated identifier string */ |
| u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ |
| u8 count; /* Number of microcode[] structures */ |
| struct { |
| __be16 model; /* The SOC model */ |
| u8 major; /* The SOC revision major */ |
| u8 minor; /* The SOC revision minor */ |
| } __attribute__ ((packed)) soc; |
| u8 padding[4]; /* Reserved, for alignment */ |
| __be64 extended_modes; /* Extended modes */ |
| __be32 vtraps[8]; /* Virtual trap addresses */ |
| u8 reserved[4]; /* Reserved, for future expansion */ |
| struct qe_microcode { |
| u8 id[32]; /* Null-terminated identifier */ |
| __be32 traps[16]; /* Trap addresses, 0 == ignore */ |
| __be32 eccr; /* The value for the ECCR register */ |
| __be32 iram_offset; /* Offset into I-RAM for the code */ |
| __be32 count; /* Number of 32-bit words of the code */ |
| __be32 code_offset; /* Offset of the actual microcode */ |
| u8 major; /* The microcode version major */ |
| u8 minor; /* The microcode version minor */ |
| u8 revision; /* The microcode version revision */ |
| u8 padding; /* Reserved, for alignment */ |
| u8 reserved[4]; /* Reserved, for future expansion */ |
| } __attribute__ ((packed)) microcode[1]; |
| /* All microcode binaries should be located here */ |
| /* CRC32 should be located here, after the microcode binaries */ |
| } __attribute__ ((packed)); |
| |
| struct qe_firmware_info { |
| char id[64]; /* Firmware name */ |
| u32 vtraps[8]; /* Virtual trap addresses */ |
| u64 extended_modes; /* Extended modes */ |
| }; |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| /* Upload a firmware to the QE */ |
| int qe_upload_firmware(const struct qe_firmware *firmware); |
| #else |
| static inline int qe_upload_firmware(const struct qe_firmware *firmware) |
| { |
| return -ENOSYS; |
| } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| |
| /* Obtain information on the uploaded firmware */ |
| struct qe_firmware_info *qe_get_firmware_info(void); |
| |
| /* QE USB */ |
| int qe_usb_clock_set(enum qe_clock clk, int rate); |
| |
| /* Buffer descriptors */ |
| struct qe_bd { |
| __be16 status; |
| __be16 length; |
| __be32 buf; |
| } __attribute__ ((packed)); |
| |
| #define BD_STATUS_MASK 0xffff0000 |
| #define BD_LENGTH_MASK 0x0000ffff |
| |
| /* Alignment */ |
| #define QE_INTR_TABLE_ALIGN 16 /* ??? */ |
| #define QE_ALIGNMENT_OF_BD 8 |
| #define QE_ALIGNMENT_OF_PRAM 64 |
| |
| /* RISC allocation */ |
| #define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ |
| #define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ |
| #define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ |
| #define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ |
| #define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ |
| QE_RISC_ALLOCATION_RISC2) |
| #define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ |
| QE_RISC_ALLOCATION_RISC2 | \ |
| QE_RISC_ALLOCATION_RISC3 | \ |
| QE_RISC_ALLOCATION_RISC4) |
| |
| /* QE extended filtering Table Lookup Key Size */ |
| enum qe_fltr_tbl_lookup_key_size { |
| QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES |
| = 0x3f, /* LookupKey parsed by the Generate LookupKey |
| CMD is truncated to 8 bytes */ |
| QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES |
| = 0x5f, /* LookupKey parsed by the Generate LookupKey |
| CMD is truncated to 16 bytes */ |
| }; |
| |
| /* QE FLTR extended filtering Largest External Table Lookup Key Size */ |
| enum qe_fltr_largest_external_tbl_lookup_key_size { |
| QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE |
| = 0x0,/* not used */ |
| QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES |
| = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ |
| QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES |
| = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ |
| }; |
| |
| /* structure representing QE parameter RAM */ |
| struct qe_timer_tables { |
| u16 tm_base; /* QE timer table base adr */ |
| u16 tm_ptr; /* QE timer table pointer */ |
| u16 r_tmr; /* QE timer mode register */ |
| u16 r_tmv; /* QE timer valid register */ |
| u32 tm_cmd; /* QE timer cmd register */ |
| u32 tm_cnt; /* QE timer internal cnt */ |
| } __attribute__ ((packed)); |
| |
| #define QE_FLTR_TAD_SIZE 8 |
| |
| /* QE extended filtering Termination Action Descriptor (TAD) */ |
| struct qe_fltr_tad { |
| u8 serialized[QE_FLTR_TAD_SIZE]; |
| } __attribute__ ((packed)); |
| |
| /* Communication Direction */ |
| enum comm_dir { |
| COMM_DIR_NONE = 0, |
| COMM_DIR_RX = 1, |
| COMM_DIR_TX = 2, |
| COMM_DIR_RX_AND_TX = 3 |
| }; |
| |
| /* QE CMXUCR Registers. |
| * There are two UCCs represented in each of the four CMXUCR registers. |
| * These values are for the UCC in the LSBs |
| */ |
| #define QE_CMXUCR_MII_ENET_MNG 0x00007000 |
| #define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 |
| #define QE_CMXUCR_GRANT 0x00008000 |
| #define QE_CMXUCR_TSA 0x00004000 |
| #define QE_CMXUCR_BKPT 0x00000100 |
| #define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F |
| |
| /* QE CMXGCR Registers. |
| */ |
| #define QE_CMXGCR_MII_ENET_MNG 0x00007000 |
| #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 |
| #define QE_CMXGCR_USBCS 0x0000000f |
| #define QE_CMXGCR_USBCS_CLK3 0x1 |
| #define QE_CMXGCR_USBCS_CLK5 0x2 |
| #define QE_CMXGCR_USBCS_CLK7 0x3 |
| #define QE_CMXGCR_USBCS_CLK9 0x4 |
| #define QE_CMXGCR_USBCS_CLK13 0x5 |
| #define QE_CMXGCR_USBCS_CLK17 0x6 |
| #define QE_CMXGCR_USBCS_CLK19 0x7 |
| #define QE_CMXGCR_USBCS_CLK21 0x8 |
| #define QE_CMXGCR_USBCS_BRG9 0x9 |
| #define QE_CMXGCR_USBCS_BRG10 0xa |
| |
| /* QE CECR Commands. |
| */ |
| #define QE_CR_FLG 0x00010000 |
| #define QE_RESET 0x80000000 |
| #define QE_INIT_TX_RX 0x00000000 |
| #define QE_INIT_RX 0x00000001 |
| #define QE_INIT_TX 0x00000002 |
| #define QE_ENTER_HUNT_MODE 0x00000003 |
| #define QE_STOP_TX 0x00000004 |
| #define QE_GRACEFUL_STOP_TX 0x00000005 |
| #define QE_RESTART_TX 0x00000006 |
| #define QE_CLOSE_RX_BD 0x00000007 |
| #define QE_SWITCH_COMMAND 0x00000007 |
| #define QE_SET_GROUP_ADDRESS 0x00000008 |
| #define QE_START_IDMA 0x00000009 |
| #define QE_MCC_STOP_RX 0x00000009 |
| #define QE_ATM_TRANSMIT 0x0000000a |
| #define QE_HPAC_CLEAR_ALL 0x0000000b |
| #define QE_GRACEFUL_STOP_RX 0x0000001a |
| #define QE_RESTART_RX 0x0000001b |
| #define QE_HPAC_SET_PRIORITY 0x0000010b |
| #define QE_HPAC_STOP_TX 0x0000020b |
| #define QE_HPAC_STOP_RX 0x0000030b |
| #define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b |
| #define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b |
| #define QE_HPAC_START_TX 0x0000060b |
| #define QE_HPAC_START_RX 0x0000070b |
| #define QE_USB_STOP_TX 0x0000000a |
| #define QE_USB_RESTART_TX 0x0000000c |
| #define QE_QMC_STOP_TX 0x0000000c |
| #define QE_QMC_STOP_RX 0x0000000d |
| #define QE_SS7_SU_FIL_RESET 0x0000000e |
| /* jonathbr added from here down for 83xx */ |
| #define QE_RESET_BCS 0x0000000a |
| #define QE_MCC_INIT_TX_RX_16 0x00000003 |
| #define QE_MCC_STOP_TX 0x00000004 |
| #define QE_MCC_INIT_TX_1 0x00000005 |
| #define QE_MCC_INIT_RX_1 0x00000006 |
| #define QE_MCC_RESET 0x00000007 |
| #define QE_SET_TIMER 0x00000008 |
| #define QE_RANDOM_NUMBER 0x0000000c |
| #define QE_ATM_MULTI_THREAD_INIT 0x00000011 |
| #define QE_ASSIGN_PAGE 0x00000012 |
| #define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 |
| #define QE_START_FLOW_CONTROL 0x00000014 |
| #define QE_STOP_FLOW_CONTROL 0x00000015 |
| #define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 |
| |
| #define QE_ASSIGN_RISC 0x00000010 |
| #define QE_CR_MCN_NORMAL_SHIFT 6 |
| #define QE_CR_MCN_USB_SHIFT 4 |
| #define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 |
| #define QE_CR_SNUM_SHIFT 17 |
| |
| /* QE CECR Sub Block - sub block of QE command. |
| */ |
| #define QE_CR_SUBBLOCK_INVALID 0x00000000 |
| #define QE_CR_SUBBLOCK_USB 0x03200000 |
| #define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 |
| #define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 |
| #define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 |
| #define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 |
| #define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 |
| #define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 |
| #define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 |
| #define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 |
| #define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 |
| #define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 |
| #define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 |
| #define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 |
| #define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 |
| #define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 |
| #define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 |
| #define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 |
| #define QE_CR_SUBBLOCK_MCC1 0x03800000 |
| #define QE_CR_SUBBLOCK_MCC2 0x03a00000 |
| #define QE_CR_SUBBLOCK_MCC3 0x03000000 |
| #define QE_CR_SUBBLOCK_IDMA1 0x02800000 |
| #define QE_CR_SUBBLOCK_IDMA2 0x02a00000 |
| #define QE_CR_SUBBLOCK_IDMA3 0x02c00000 |
| #define QE_CR_SUBBLOCK_IDMA4 0x02e00000 |
| #define QE_CR_SUBBLOCK_HPAC 0x01e00000 |
| #define QE_CR_SUBBLOCK_SPI1 0x01400000 |
| #define QE_CR_SUBBLOCK_SPI2 0x01600000 |
| #define QE_CR_SUBBLOCK_RAND 0x01c00000 |
| #define QE_CR_SUBBLOCK_TIMER 0x01e00000 |
| #define QE_CR_SUBBLOCK_GENERAL 0x03c00000 |
| |
| /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ |
| #define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ |
| #define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 |
| #define QE_CR_PROTOCOL_QMC 0x02 |
| #define QE_CR_PROTOCOL_UART 0x04 |
| #define QE_CR_PROTOCOL_ATM_POS 0x0A |
| #define QE_CR_PROTOCOL_ETHERNET 0x0C |
| #define QE_CR_PROTOCOL_L2_SWITCH 0x0D |
| |
| /* BRG configuration register */ |
| #define QE_BRGC_ENABLE 0x00010000 |
| #define QE_BRGC_DIVISOR_SHIFT 1 |
| #define QE_BRGC_DIVISOR_MAX 0xFFF |
| #define QE_BRGC_DIV16 1 |
| |
| /* QE Timers registers */ |
| #define QE_GTCFR1_PCAS 0x80 |
| #define QE_GTCFR1_STP2 0x20 |
| #define QE_GTCFR1_RST2 0x10 |
| #define QE_GTCFR1_GM2 0x08 |
| #define QE_GTCFR1_GM1 0x04 |
| #define QE_GTCFR1_STP1 0x02 |
| #define QE_GTCFR1_RST1 0x01 |
| |
| /* SDMA registers */ |
| #define QE_SDSR_BER1 0x02000000 |
| #define QE_SDSR_BER2 0x01000000 |
| |
| #define QE_SDMR_GLB_1_MSK 0x80000000 |
| #define QE_SDMR_ADR_SEL 0x20000000 |
| #define QE_SDMR_BER1_MSK 0x02000000 |
| #define QE_SDMR_BER2_MSK 0x01000000 |
| #define QE_SDMR_EB1_MSK 0x00800000 |
| #define QE_SDMR_ER1_MSK 0x00080000 |
| #define QE_SDMR_ER2_MSK 0x00040000 |
| #define QE_SDMR_CEN_MASK 0x0000E000 |
| #define QE_SDMR_SBER_1 0x00000200 |
| #define QE_SDMR_SBER_2 0x00000200 |
| #define QE_SDMR_EB1_PR_MASK 0x000000C0 |
| #define QE_SDMR_ER1_PR 0x00000008 |
| |
| #define QE_SDMR_CEN_SHIFT 13 |
| #define QE_SDMR_EB1_PR_SHIFT 6 |
| |
| #define QE_SDTM_MSNUM_SHIFT 24 |
| |
| #define QE_SDEBCR_BA_MASK 0x01FFFFFF |
| |
| /* Communication Processor */ |
| #define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ |
| #define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ |
| #define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ |
| |
| /* I-RAM */ |
| #define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ |
| #define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ |
| #define QE_IRAM_READY 0x80000000 /* Ready */ |
| |
| /* UPC */ |
| #define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ |
| #define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ |
| #define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ |
| #define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ |
| #define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ |
| |
| /* UCC GUEMR register */ |
| #define UCC_GUEMR_MODE_MASK_RX 0x02 |
| #define UCC_GUEMR_MODE_FAST_RX 0x02 |
| #define UCC_GUEMR_MODE_SLOW_RX 0x00 |
| #define UCC_GUEMR_MODE_MASK_TX 0x01 |
| #define UCC_GUEMR_MODE_FAST_TX 0x01 |
| #define UCC_GUEMR_MODE_SLOW_TX 0x00 |
| #define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) |
| #define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but |
| must be set 1 */ |
| |
| /* structure representing UCC SLOW parameter RAM */ |
| struct ucc_slow_pram { |
| __be16 rbase; /* RX BD base address */ |
| __be16 tbase; /* TX BD base address */ |
| u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ |
| u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ |
| __be16 mrblr; /* Rx buffer length */ |
| __be32 rstate; /* Rx internal state */ |
| __be32 rptr; /* Rx internal data pointer */ |
| __be16 rbptr; /* rb BD Pointer */ |
| __be16 rcount; /* Rx internal byte count */ |
| __be32 rtemp; /* Rx temp */ |
| __be32 tstate; /* Tx internal state */ |
| __be32 tptr; /* Tx internal data pointer */ |
| __be16 tbptr; /* Tx BD pointer */ |
| __be16 tcount; /* Tx byte count */ |
| __be32 ttemp; /* Tx temp */ |
| __be32 rcrc; /* temp receive CRC */ |
| __be32 tcrc; /* temp transmit CRC */ |
| } __attribute__ ((packed)); |
| |
| /* General UCC SLOW Mode Register (GUMRH & GUMRL) */ |
| #define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 |
| #define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 |
| #define UCC_SLOW_GUMR_H_REVD 0x00002000 |
| #define UCC_SLOW_GUMR_H_TRX 0x00001000 |
| #define UCC_SLOW_GUMR_H_TTX 0x00000800 |
| #define UCC_SLOW_GUMR_H_CDP 0x00000400 |
| #define UCC_SLOW_GUMR_H_CTSP 0x00000200 |
| #define UCC_SLOW_GUMR_H_CDS 0x00000100 |
| #define UCC_SLOW_GUMR_H_CTSS 0x00000080 |
| #define UCC_SLOW_GUMR_H_TFL 0x00000040 |
| #define UCC_SLOW_GUMR_H_RFW 0x00000020 |
| #define UCC_SLOW_GUMR_H_TXSY 0x00000010 |
| #define UCC_SLOW_GUMR_H_4SYNC 0x00000004 |
| #define UCC_SLOW_GUMR_H_8SYNC 0x00000008 |
| #define UCC_SLOW_GUMR_H_16SYNC 0x0000000c |
| #define UCC_SLOW_GUMR_H_RTSM 0x00000002 |
| #define UCC_SLOW_GUMR_H_RSYN 0x00000001 |
| |
| #define UCC_SLOW_GUMR_L_TCI 0x10000000 |
| #define UCC_SLOW_GUMR_L_RINV 0x02000000 |
| #define UCC_SLOW_GUMR_L_TINV 0x01000000 |
| #define UCC_SLOW_GUMR_L_TEND 0x00040000 |
| #define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 |
| #define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 |
| #define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 |
| #define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 |
| #define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 |
| #define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 |
| #define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 |
| #define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 |
| #define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 |
| #define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 |
| #define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 |
| #define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 |
| #define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 |
| #define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 |
| #define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 |
| #define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 |
| #define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 |
| #define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 |
| #define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 |
| #define UCC_SLOW_GUMR_L_ENR 0x00000020 |
| #define UCC_SLOW_GUMR_L_ENT 0x00000010 |
| #define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F |
| #define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 |
| #define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 |
| #define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 |
| #define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 |
| |
| /* General UCC FAST Mode Register */ |
| #define UCC_FAST_GUMR_TCI 0x20000000 |
| #define UCC_FAST_GUMR_TRX 0x10000000 |
| #define UCC_FAST_GUMR_TTX 0x08000000 |
| #define UCC_FAST_GUMR_CDP 0x04000000 |
| #define UCC_FAST_GUMR_CTSP 0x02000000 |
| #define UCC_FAST_GUMR_CDS 0x01000000 |
| #define UCC_FAST_GUMR_CTSS 0x00800000 |
| #define UCC_FAST_GUMR_TXSY 0x00020000 |
| #define UCC_FAST_GUMR_RSYN 0x00010000 |
| #define UCC_FAST_GUMR_RTSM 0x00002000 |
| #define UCC_FAST_GUMR_REVD 0x00000400 |
| #define UCC_FAST_GUMR_ENR 0x00000020 |
| #define UCC_FAST_GUMR_ENT 0x00000010 |
| |
| /* UART Slow UCC Event Register (UCCE) */ |
| #define UCC_UART_UCCE_AB 0x0200 |
| #define UCC_UART_UCCE_IDLE 0x0100 |
| #define UCC_UART_UCCE_GRA 0x0080 |
| #define UCC_UART_UCCE_BRKE 0x0040 |
| #define UCC_UART_UCCE_BRKS 0x0020 |
| #define UCC_UART_UCCE_CCR 0x0008 |
| #define UCC_UART_UCCE_BSY 0x0004 |
| #define UCC_UART_UCCE_TX 0x0002 |
| #define UCC_UART_UCCE_RX 0x0001 |
| |
| /* HDLC Slow UCC Event Register (UCCE) */ |
| #define UCC_HDLC_UCCE_GLR 0x1000 |
| #define UCC_HDLC_UCCE_GLT 0x0800 |
| #define UCC_HDLC_UCCE_IDLE 0x0100 |
| #define UCC_HDLC_UCCE_BRKE 0x0040 |
| #define UCC_HDLC_UCCE_BRKS 0x0020 |
| #define UCC_HDLC_UCCE_TXE 0x0010 |
| #define UCC_HDLC_UCCE_RXF 0x0008 |
| #define UCC_HDLC_UCCE_BSY 0x0004 |
| #define UCC_HDLC_UCCE_TXB 0x0002 |
| #define UCC_HDLC_UCCE_RXB 0x0001 |
| |
| /* BISYNC Slow UCC Event Register (UCCE) */ |
| #define UCC_BISYNC_UCCE_GRA 0x0080 |
| #define UCC_BISYNC_UCCE_TXE 0x0010 |
| #define UCC_BISYNC_UCCE_RCH 0x0008 |
| #define UCC_BISYNC_UCCE_BSY 0x0004 |
| #define UCC_BISYNC_UCCE_TXB 0x0002 |
| #define UCC_BISYNC_UCCE_RXB 0x0001 |
| |
| /* Gigabit Ethernet Fast UCC Event Register (UCCE) */ |
| #define UCC_GETH_UCCE_MPD 0x80000000 |
| #define UCC_GETH_UCCE_SCAR 0x40000000 |
| #define UCC_GETH_UCCE_GRA 0x20000000 |
| #define UCC_GETH_UCCE_CBPR 0x10000000 |
| #define UCC_GETH_UCCE_BSY 0x08000000 |
| #define UCC_GETH_UCCE_RXC 0x04000000 |
| #define UCC_GETH_UCCE_TXC 0x02000000 |
| #define UCC_GETH_UCCE_TXE 0x01000000 |
| #define UCC_GETH_UCCE_TXB7 0x00800000 |
| #define UCC_GETH_UCCE_TXB6 0x00400000 |
| #define UCC_GETH_UCCE_TXB5 0x00200000 |
| #define UCC_GETH_UCCE_TXB4 0x00100000 |
| #define UCC_GETH_UCCE_TXB3 0x00080000 |
| #define UCC_GETH_UCCE_TXB2 0x00040000 |
| #define UCC_GETH_UCCE_TXB1 0x00020000 |
| #define UCC_GETH_UCCE_TXB0 0x00010000 |
| #define UCC_GETH_UCCE_RXB7 0x00008000 |
| #define UCC_GETH_UCCE_RXB6 0x00004000 |
| #define UCC_GETH_UCCE_RXB5 0x00002000 |
| #define UCC_GETH_UCCE_RXB4 0x00001000 |
| #define UCC_GETH_UCCE_RXB3 0x00000800 |
| #define UCC_GETH_UCCE_RXB2 0x00000400 |
| #define UCC_GETH_UCCE_RXB1 0x00000200 |
| #define UCC_GETH_UCCE_RXB0 0x00000100 |
| #define UCC_GETH_UCCE_RXF7 0x00000080 |
| #define UCC_GETH_UCCE_RXF6 0x00000040 |
| #define UCC_GETH_UCCE_RXF5 0x00000020 |
| #define UCC_GETH_UCCE_RXF4 0x00000010 |
| #define UCC_GETH_UCCE_RXF3 0x00000008 |
| #define UCC_GETH_UCCE_RXF2 0x00000004 |
| #define UCC_GETH_UCCE_RXF1 0x00000002 |
| #define UCC_GETH_UCCE_RXF0 0x00000001 |
| |
| /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */ |
| #define UCC_UART_UPSMR_FLC 0x8000 |
| #define UCC_UART_UPSMR_SL 0x4000 |
| #define UCC_UART_UPSMR_CL_MASK 0x3000 |
| #define UCC_UART_UPSMR_CL_8 0x3000 |
| #define UCC_UART_UPSMR_CL_7 0x2000 |
| #define UCC_UART_UPSMR_CL_6 0x1000 |
| #define UCC_UART_UPSMR_CL_5 0x0000 |
| #define UCC_UART_UPSMR_UM_MASK 0x0c00 |
| #define UCC_UART_UPSMR_UM_NORMAL 0x0000 |
| #define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 |
| #define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 |
| #define UCC_UART_UPSMR_FRZ 0x0200 |
| #define UCC_UART_UPSMR_RZS 0x0100 |
| #define UCC_UART_UPSMR_SYN 0x0080 |
| #define UCC_UART_UPSMR_DRT 0x0040 |
| #define UCC_UART_UPSMR_PEN 0x0010 |
| #define UCC_UART_UPSMR_RPM_MASK 0x000c |
| #define UCC_UART_UPSMR_RPM_ODD 0x0000 |
| #define UCC_UART_UPSMR_RPM_LOW 0x0004 |
| #define UCC_UART_UPSMR_RPM_EVEN 0x0008 |
| #define UCC_UART_UPSMR_RPM_HIGH 0x000C |
| #define UCC_UART_UPSMR_TPM_MASK 0x0003 |
| #define UCC_UART_UPSMR_TPM_ODD 0x0000 |
| #define UCC_UART_UPSMR_TPM_LOW 0x0001 |
| #define UCC_UART_UPSMR_TPM_EVEN 0x0002 |
| #define UCC_UART_UPSMR_TPM_HIGH 0x0003 |
| |
| /* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */ |
| #define UCC_GETH_UPSMR_FTFE 0x80000000 |
| #define UCC_GETH_UPSMR_PTPE 0x40000000 |
| #define UCC_GETH_UPSMR_ECM 0x04000000 |
| #define UCC_GETH_UPSMR_HSE 0x02000000 |
| #define UCC_GETH_UPSMR_PRO 0x00400000 |
| #define UCC_GETH_UPSMR_CAP 0x00200000 |
| #define UCC_GETH_UPSMR_RSH 0x00100000 |
| #define UCC_GETH_UPSMR_RPM 0x00080000 |
| #define UCC_GETH_UPSMR_R10M 0x00040000 |
| #define UCC_GETH_UPSMR_RLPB 0x00020000 |
| #define UCC_GETH_UPSMR_TBIM 0x00010000 |
| #define UCC_GETH_UPSMR_RES1 0x00002000 |
| #define UCC_GETH_UPSMR_RMM 0x00001000 |
| #define UCC_GETH_UPSMR_CAM 0x00000400 |
| #define UCC_GETH_UPSMR_BRO 0x00000200 |
| #define UCC_GETH_UPSMR_SMM 0x00000080 |
| #define UCC_GETH_UPSMR_SGMM 0x00000020 |
| |
| /* UCC Transmit On Demand Register (UTODR) */ |
| #define UCC_SLOW_TOD 0x8000 |
| #define UCC_FAST_TOD 0x8000 |
| |
| /* UCC Bus Mode Register masks */ |
| /* Not to be confused with the Bundle Mode Register */ |
| #define UCC_BMR_GBL 0x20 |
| #define UCC_BMR_BO_BE 0x10 |
| #define UCC_BMR_CETM 0x04 |
| #define UCC_BMR_DTB 0x02 |
| #define UCC_BMR_BDB 0x01 |
| |
| /* Function code masks */ |
| #define FC_GBL 0x20 |
| #define FC_DTB_LCL 0x02 |
| #define UCC_FAST_FUNCTION_CODE_GBL 0x20 |
| #define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 |
| #define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 |
| |
| #endif /* __KERNEL__ */ |
| #endif /* _ASM_POWERPC_QE_H */ |
