arch/arm/mach-u300/core.c - maze/linux - Git at Google

 /*
  *
  * arch/arm/mach-u300/core.c
  *
  *
  * Copyright (C) 2007-2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Core platform support, IRQ handling and device definitions.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/mm.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>

 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>

 #include <mach/hardware.h>
 #include <mach/syscon.h>

 #include "clock.h"
 #include "mmc.h"

 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
  * only things we need are the areas where we find the timer, syscon and
  * intcon, since the remaining device drivers will map their own memory
  * physical to virtual as the need arise.
  */
 static struct map_desc u300_io_desc[] __initdata = {
 	{
 		.virtual	= U300_SLOW_PER_VIRT_BASE,
 		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	},
 	{
 		.virtual	= U300_AHB_PER_VIRT_BASE,
 		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
 		.length		= SZ_32K,
 		.type		= MT_DEVICE,
 	},
 	{
 		.virtual	= U300_FAST_PER_VIRT_BASE,
 		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
 		.length		= SZ_32K,
 		.type		= MT_DEVICE,
 	},
 	{
 		.virtual	= 0xffff2000, /* TCM memory */
 		.pfn		= __phys_to_pfn(0xffff2000),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	},

 	/*
 	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
 	 * may have to be moved to 0x00000000 in order to use the ROM.
 	 */
 	/*
 	{
 		.virtual	= U300_BOOTROM_VIRT_BASE,
 		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
 		.length		= SZ_64K,
 		.type		= MT_ROM,
 	},
 	*/
 };

 void __init u300_map_io(void)
 {
 	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
 }

 /*
  * Declaration of devices found on the U300 board and
  * their respective memory locations.
  */
 static struct amba_device uart0_device = {
 	.dev = {
 		.init_name = "uart0", /* Slow device at 0x3000 offset */
 		.platform_data = NULL,
 	},
 	.res = {
 		.start = U300_UART0_BASE,
 		.end   = U300_UART0_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = { IRQ_U300_UART0, NO_IRQ },
 };

 /* The U335 have an additional UART1 on the APP CPU */
 #ifdef CONFIG_MACH_U300_BS335
 static struct amba_device uart1_device = {
 	.dev = {
 		.init_name = "uart1", /* Fast device at 0x7000 offset */
 		.platform_data = NULL,
 	},
 	.res = {
 		.start = U300_UART1_BASE,
 		.end   = U300_UART1_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = { IRQ_U300_UART1, NO_IRQ },
 };
 #endif

 static struct amba_device pl172_device = {
 	.dev = {
 		.init_name = "pl172", /* AHB device at 0x4000 offset */
 		.platform_data = NULL,
 	},
 	.res = {
 		.start = U300_EMIF_CFG_BASE,
 		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };


 /*
  * Everything within this next ifdef deals with external devices connected to
  * the APP SPI bus.
  */
 static struct amba_device pl022_device = {
 	.dev = {
 		.coherent_dma_mask = ~0,
 		.init_name = "pl022", /* Fast device at 0x6000 offset */
 	},
 	.res = {
 		.start = U300_SPI_BASE,
 		.end   = U300_SPI_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = {IRQ_U300_SPI, NO_IRQ },
 	/*
 	 * This device has a DMA channel but the Linux driver does not use
 	 * it currently.
 	 */
 };

 static struct amba_device mmcsd_device = {
 	.dev = {
 		.init_name = "mmci", /* Fast device at 0x1000 offset */
 		.platform_data = NULL, /* Added later */
 	},
 	.res = {
 		.start = U300_MMCSD_BASE,
 		.end   = U300_MMCSD_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
 	/*
 	 * This device has a DMA channel but the Linux driver does not use
 	 * it currently.
 	 */
 };

 /*
  * The order of device declaration may be important, since some devices
  * have dependencies on other devices being initialized first.
  */
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,
 #ifdef CONFIG_MACH_U300_BS335
 	&uart1_device,
 #endif
 	&pl022_device,
 	&pl172_device,
 	&mmcsd_device,
 };

 /* Here follows a list of all hw resources that the platform devices
  * allocate. Note, clock dependencies are not included
  */

 static struct resource gpio_resources[] = {
 	{
 		.start = U300_GPIO_BASE,
 		.end   = (U300_GPIO_BASE + SZ_4K - 1),
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.name  = "gpio0",
 		.start = IRQ_U300_GPIO_PORT0,
 		.end   = IRQ_U300_GPIO_PORT0,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "gpio1",
 		.start = IRQ_U300_GPIO_PORT1,
 		.end   = IRQ_U300_GPIO_PORT1,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "gpio2",
 		.start = IRQ_U300_GPIO_PORT2,
 		.end   = IRQ_U300_GPIO_PORT2,
 		.flags = IORESOURCE_IRQ,
 	},
 #ifdef U300_COH901571_3
 	{
 		.name  = "gpio3",
 		.start = IRQ_U300_GPIO_PORT3,
 		.end   = IRQ_U300_GPIO_PORT3,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "gpio4",
 		.start = IRQ_U300_GPIO_PORT4,
 		.end   = IRQ_U300_GPIO_PORT4,
 		.flags = IORESOURCE_IRQ,
 	},
 #ifdef CONFIG_MACH_U300_BS335
 	{
 		.name  = "gpio5",
 		.start = IRQ_U300_GPIO_PORT5,
 		.end   = IRQ_U300_GPIO_PORT5,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "gpio6",
 		.start = IRQ_U300_GPIO_PORT6,
 		.end   = IRQ_U300_GPIO_PORT6,
 		.flags = IORESOURCE_IRQ,
 	},
 #endif /* CONFIG_MACH_U300_BS335 */
 #endif /* U300_COH901571_3 */
 };

 static struct resource keypad_resources[] = {
 	{
 		.start = U300_KEYPAD_BASE,
 		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.name  = "coh901461-press",
 		.start = IRQ_U300_KEYPAD_KEYBF,
 		.end   = IRQ_U300_KEYPAD_KEYBF,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "coh901461-release",
 		.start = IRQ_U300_KEYPAD_KEYBR,
 		.end   = IRQ_U300_KEYPAD_KEYBR,
 		.flags = IORESOURCE_IRQ,
 	},
 };

 static struct resource rtc_resources[] = {
 	{
 		.start = U300_RTC_BASE,
 		.end   = U300_RTC_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.start = IRQ_U300_RTC,
 		.end   = IRQ_U300_RTC,
 		.flags = IORESOURCE_IRQ,
 	},
 };

 /*
  * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
  * but these are not yet used by the driver.
  */
 static struct resource fsmc_resources[] = {
 	{
 		.start = U300_NAND_IF_PHYS_BASE,
 		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };

 static struct resource i2c0_resources[] = {
 	{
 		.start = U300_I2C0_BASE,
 		.end   = U300_I2C0_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.start = IRQ_U300_I2C0,
 		.end   = IRQ_U300_I2C0,
 		.flags = IORESOURCE_IRQ,
 	},
 };

 static struct resource i2c1_resources[] = {
 	{
 		.start = U300_I2C1_BASE,
 		.end   = U300_I2C1_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.start = IRQ_U300_I2C1,
 		.end   = IRQ_U300_I2C1,
 		.flags = IORESOURCE_IRQ,
 	},

 };

 static struct resource wdog_resources[] = {
 	{
 		.start = U300_WDOG_BASE,
 		.end   = U300_WDOG_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.start = IRQ_U300_WDOG,
 		.end   = IRQ_U300_WDOG,
 		.flags = IORESOURCE_IRQ,
 	}
 };

 /* TODO: These should be protected by suitable #ifdef's */
 static struct resource ave_resources[] = {
 	{
 		.name  = "AVE3e I/O Area",
 		.start = U300_VIDEOENC_BASE,
 		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.name  = "AVE3e IRQ0",
 		.start = IRQ_U300_VIDEO_ENC_0,
 		.end   = IRQ_U300_VIDEO_ENC_0,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "AVE3e IRQ1",
 		.start = IRQ_U300_VIDEO_ENC_1,
 		.end   = IRQ_U300_VIDEO_ENC_1,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
 		.name  = "AVE3e Physmem Area",
 		.start = 0, /* 0 will be remapped to reserved memory */
 		.end   = SZ_1M - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
 	 * adresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
 		.start = 0xd0000000,
 		.end   = 0xd0000000 + SZ_256M - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	{
 		.name  = "AVE3e Reserved 1",
 		.start = 0xe0000000,
 		.end   = 0xe0000000 + SZ_256M - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };

 static struct platform_device wdog_device = {
 	.name = "wdog",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(wdog_resources),
 	.resource = wdog_resources,
 };

 static struct platform_device i2c0_device = {
 	.name = "stddci2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };

 static struct platform_device i2c1_device = {
 	.name = "stddci2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
 };

 static struct platform_device gpio_device = {
 	.name = "u300-gpio",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(gpio_resources),
 	.resource = gpio_resources,
 };

 static struct platform_device keypad_device = {
 	.name = "keypad",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(keypad_resources),
 	.resource = keypad_resources,
 };

 static struct platform_device rtc_device = {
 	.name = "rtc0",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(rtc_resources),
 	.resource = rtc_resources,
 };

 static struct platform_device fsmc_device = {
 	.name = "nandif",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(fsmc_resources),
 	.resource = fsmc_resources,
 };

 static struct platform_device ave_device = {
 	.name = "video_enc",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(ave_resources),
 	.resource = ave_resources,
 };

 /*
  * Notice that AMBA devices are initialized before platform devices.
  *
  */
 static struct platform_device *platform_devs[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
 	&keypad_device,
 	&rtc_device,
 	&gpio_device,
 	&fsmc_device,
 	&wdog_device,
 	&ave_device
 };


 /*
  * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
  * together so some interrupts are connected to the first one and some
  * to the second one.
  */
 void __init u300_init_irq(void)
 {
 	u32 mask[2] = {0, 0};
 	int i;

 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
 	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
 	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }


 /*
  * U300 platforms peripheral handling
  */
 struct db_chip {
 	u16 chipid;
 	const char *name;
 };

 /*
  * This is a list of the Digital Baseband chips used in the U300 platform.
  */
 static struct db_chip db_chips[] __initdata = {
 	{
 		.chipid = 0xb800,
 		.name = "DB3000",
 	},
 	{
 		.chipid = 0xc000,
 		.name = "DB3100",
 	},
 	{
 		.chipid = 0xc800,
 		.name = "DB3150",
 	},
 	{
 		.chipid = 0xd800,
 		.name = "DB3200",
 	},
 	{
 		.chipid = 0xe000,
 		.name = "DB3250",
 	},
 	{
 		.chipid = 0xe800,
 		.name = "DB3210",
 	},
 	{
 		.chipid = 0xf000,
 		.name = "DB3350 P1x",
 	},
 	{
 		.chipid = 0xf100,
 		.name = "DB3350 P2x",
 	},
 	{
 		.chipid = 0x0000, /* List terminator */
 		.name = NULL,
 	}
 };

 static void u300_init_check_chip(void)
 {

 	u16 val;
 	struct db_chip *chip;
 	const char *chipname;
 	const char unknown[] = "UNKNOWN";

 	/* Read out and print chip ID */
 	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
 	/* This is in funky bigendian order... */
 	val = (val & 0xFFU) << 8 | (val >> 8);
 	chip = db_chips;
 	chipname = unknown;

 	for ( ; chip->chipid; chip++) {
 		if (chip->chipid == (val & 0xFF00U)) {
 			chipname = chip->name;
 			break;
 		}
 	}
 	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
 	       "(chip ID 0x%04x)\n", chipname, val);

 #ifdef CONFIG_MACH_U300_BS26
 	if ((val & 0xFF00U) != 0xc800) {
 		printk(KERN_ERR "Platform configured for BS25/BS26 " \
 		       "with DB3150 but %s detected, expect problems!",
 		       chipname);
 	}
 #endif
 #ifdef CONFIG_MACH_U300_BS330
 	if ((val & 0xFF00U) != 0xd800) {
 		printk(KERN_ERR "Platform configured for BS330 " \
 		       "with DB3200 but %s detected, expect problems!",
 		       chipname);
 	}
 #endif
 #ifdef CONFIG_MACH_U300_BS335
 	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
 		printk(KERN_ERR "Platform configured for BS365 " \
 		       " with DB3350 but %s detected, expect problems!",
 		       chipname);
 	}
 #endif
 #ifdef CONFIG_MACH_U300_BS365
 	if ((val & 0xFF00U) != 0xe800) {
 		printk(KERN_ERR "Platform configured for BS365 " \
 		       "with DB3210 but %s detected, expect problems!",
 		       chipname);
 	}
 #endif


 }

 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
  * and assigns actual adresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
 	unsigned long curr_start = __pa(high_memory);
 	int i, j;

 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
 		for (j = 0; j < platform_devs[i]->num_resources; j++) {
 			struct resource *const res =
 			  &platform_devs[i]->resource[j];

 			if (IORESOURCE_MEM == res->flags &&
 				     0 == res->start) {
 				res->start  = curr_start;
 				res->end   += curr_start;
 				curr_start += (res->end - res->start + 1);

 				printk(KERN_INFO "core.c: Mapping RAM " \
 				       "%#x-%#x to device %s:%s\n",
 					res->start, res->end,
 				       platform_devs[i]->name, res->name);
 			}
 		}
 	}
 }

 void __init u300_init_devices(void)
 {
 	int i;
 	u16 val;

 	/* Check what platform we run and print some status information */
 	u300_init_check_chip();

 	/* Set system to run at PLL208, max performance, a known state. */
 	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));

 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
 	u300_unclock_primecells();

 	u300_assign_physmem();

 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

 #ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
 	/*
 	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
 	 * both subsystems are requesting this mode.
 	 * If we not share the Acc SDRAM, this is never the case. Therefore
 	 * enable it here from the App side.
 	 */
 	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
 		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
 #endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
 }

 static int core_module_init(void)
 {
 	/*
 	 * This needs to be initialized later: it needs the input framework
 	 * to be initialized first.
 	 */
 	return mmc_init(&mmcsd_device);
 }
 module_init(core_module_init);
	/*
	*
	* arch/arm/mach-u300/core.c
	*
	*
	* Copyright (C) 2007-2009 ST-Ericsson AB
	* License terms: GNU General Public License (GPL) version 2
	* Core platform support, IRQ handling and device definitions.
	* Author: Linus Walleij <linus.walleij@stericsson.com>
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/spinlock.h>
	#include <linux/interrupt.h>
	#include <linux/bitops.h>
	#include <linux/device.h>
	#include <linux/mm.h>
	#include <linux/termios.h>
	#include <linux/amba/bus.h>
	#include <linux/platform_device.h>
	#include <linux/gpio.h>

	#include <asm/types.h>
	#include <asm/setup.h>
	#include <asm/memory.h>
	#include <asm/hardware/vic.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>

	#include <mach/hardware.h>
	#include <mach/syscon.h>

	#include "clock.h"
	#include "mmc.h"

	/*
	* Static I/O mappings that are needed for booting the U300 platforms. The
	* only things we need are the areas where we find the timer, syscon and
	* intcon, since the remaining device drivers will map their own memory
	* physical to virtual as the need arise.
	*/
	static struct map_desc u300_io_desc[] __initdata = {
	{
	.virtual = U300_SLOW_PER_VIRT_BASE,
	.pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
	.length = SZ_64K,
	.type = MT_DEVICE,
	},
	{
	.virtual = U300_AHB_PER_VIRT_BASE,
	.pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
	.length = SZ_32K,
	.type = MT_DEVICE,
	},
	{
	.virtual = U300_FAST_PER_VIRT_BASE,
	.pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
	.length = SZ_32K,
	.type = MT_DEVICE,
	},
	{
	.virtual = 0xffff2000, /* TCM memory */
	.pfn = __phys_to_pfn(0xffff2000),
	.length = SZ_16K,
	.type = MT_DEVICE,
	},

	/*
	* This overlaps with the IRQ vectors etc at 0xffff0000, so these
	* may have to be moved to 0x00000000 in order to use the ROM.
	*/
	/*
	{
	.virtual = U300_BOOTROM_VIRT_BASE,
	.pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
	.length = SZ_64K,
	.type = MT_ROM,
	},
	*/
	};

	void __init u300_map_io(void)
	{
	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
	}

	/*
	* Declaration of devices found on the U300 board and
	* their respective memory locations.
	*/
	static struct amba_device uart0_device = {
	.dev = {
	.init_name = "uart0", /* Slow device at 0x3000 offset */
	.platform_data = NULL,
	},
	.res = {
	.start = U300_UART0_BASE,
	.end = U300_UART0_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	.irq = { IRQ_U300_UART0, NO_IRQ },
	};

	/* The U335 have an additional UART1 on the APP CPU */
	#ifdef CONFIG_MACH_U300_BS335
	static struct amba_device uart1_device = {
	.dev = {
	.init_name = "uart1", /* Fast device at 0x7000 offset */
	.platform_data = NULL,
	},
	.res = {
	.start = U300_UART1_BASE,
	.end = U300_UART1_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	.irq = { IRQ_U300_UART1, NO_IRQ },
	};
	#endif

	static struct amba_device pl172_device = {
	.dev = {
	.init_name = "pl172", /* AHB device at 0x4000 offset */
	.platform_data = NULL,
	},
	.res = {
	.start = U300_EMIF_CFG_BASE,
	.end = U300_EMIF_CFG_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	};


	/*
	* Everything within this next ifdef deals with external devices connected to
	* the APP SPI bus.
	*/
	static struct amba_device pl022_device = {
	.dev = {
	.coherent_dma_mask = ~0,
	.init_name = "pl022", /* Fast device at 0x6000 offset */
	},
	.res = {
	.start = U300_SPI_BASE,
	.end = U300_SPI_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	.irq = {IRQ_U300_SPI, NO_IRQ },
	/*
	* This device has a DMA channel but the Linux driver does not use
	* it currently.
	*/
	};

	static struct amba_device mmcsd_device = {
	.dev = {
	.init_name = "mmci", /* Fast device at 0x1000 offset */
	.platform_data = NULL, /* Added later */
	},
	.res = {
	.start = U300_MMCSD_BASE,
	.end = U300_MMCSD_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
	/*
	* This device has a DMA channel but the Linux driver does not use
	* it currently.
	*/
	};

	/*
	* The order of device declaration may be important, since some devices
	* have dependencies on other devices being initialized first.
	*/
	static struct amba_device *amba_devs[] __initdata = {
	&uart0_device,
	#ifdef CONFIG_MACH_U300_BS335
	&uart1_device,
	#endif
	&pl022_device,
	&pl172_device,
	&mmcsd_device,
	};

	/* Here follows a list of all hw resources that the platform devices
	* allocate. Note, clock dependencies are not included
	*/

	static struct resource gpio_resources[] = {
	{
	.start = U300_GPIO_BASE,
	.end = (U300_GPIO_BASE + SZ_4K - 1),
	.flags = IORESOURCE_MEM,
	},
	{
	.name = "gpio0",
	.start = IRQ_U300_GPIO_PORT0,
	.end = IRQ_U300_GPIO_PORT0,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "gpio1",
	.start = IRQ_U300_GPIO_PORT1,
	.end = IRQ_U300_GPIO_PORT1,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "gpio2",
	.start = IRQ_U300_GPIO_PORT2,
	.end = IRQ_U300_GPIO_PORT2,
	.flags = IORESOURCE_IRQ,
	},
	#ifdef U300_COH901571_3
	{
	.name = "gpio3",
	.start = IRQ_U300_GPIO_PORT3,
	.end = IRQ_U300_GPIO_PORT3,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "gpio4",
	.start = IRQ_U300_GPIO_PORT4,
	.end = IRQ_U300_GPIO_PORT4,
	.flags = IORESOURCE_IRQ,
	},
	#ifdef CONFIG_MACH_U300_BS335
	{
	.name = "gpio5",
	.start = IRQ_U300_GPIO_PORT5,
	.end = IRQ_U300_GPIO_PORT5,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "gpio6",
	.start = IRQ_U300_GPIO_PORT6,
	.end = IRQ_U300_GPIO_PORT6,
	.flags = IORESOURCE_IRQ,
	},
	#endif /* CONFIG_MACH_U300_BS335 */
	#endif /* U300_COH901571_3 */
	};

	static struct resource keypad_resources[] = {
	{
	.start = U300_KEYPAD_BASE,
	.end = U300_KEYPAD_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.name = "coh901461-press",
	.start = IRQ_U300_KEYPAD_KEYBF,
	.end = IRQ_U300_KEYPAD_KEYBF,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "coh901461-release",
	.start = IRQ_U300_KEYPAD_KEYBR,
	.end = IRQ_U300_KEYPAD_KEYBR,
	.flags = IORESOURCE_IRQ,
	},
	};

	static struct resource rtc_resources[] = {
	{
	.start = U300_RTC_BASE,
	.end = U300_RTC_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = IRQ_U300_RTC,
	.end = IRQ_U300_RTC,
	.flags = IORESOURCE_IRQ,
	},
	};

	/*
	* Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
	* but these are not yet used by the driver.
	*/
	static struct resource fsmc_resources[] = {
	{
	.start = U300_NAND_IF_PHYS_BASE,
	.end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct resource i2c0_resources[] = {
	{
	.start = U300_I2C0_BASE,
	.end = U300_I2C0_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = IRQ_U300_I2C0,
	.end = IRQ_U300_I2C0,
	.flags = IORESOURCE_IRQ,
	},
	};

	static struct resource i2c1_resources[] = {
	{
	.start = U300_I2C1_BASE,
	.end = U300_I2C1_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = IRQ_U300_I2C1,
	.end = IRQ_U300_I2C1,
	.flags = IORESOURCE_IRQ,
	},

	};

	static struct resource wdog_resources[] = {
	{
	.start = U300_WDOG_BASE,
	.end = U300_WDOG_BASE + SZ_4K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = IRQ_U300_WDOG,
	.end = IRQ_U300_WDOG,
	.flags = IORESOURCE_IRQ,
	}
	};

	/* TODO: These should be protected by suitable #ifdef's */
	static struct resource ave_resources[] = {
	{
	.name = "AVE3e I/O Area",
	.start = U300_VIDEOENC_BASE,
	.end = U300_VIDEOENC_BASE + SZ_512K - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.name = "AVE3e IRQ0",
	.start = IRQ_U300_VIDEO_ENC_0,
	.end = IRQ_U300_VIDEO_ENC_0,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "AVE3e IRQ1",
	.start = IRQ_U300_VIDEO_ENC_1,
	.end = IRQ_U300_VIDEO_ENC_1,
	.flags = IORESOURCE_IRQ,
	},
	{
	.name = "AVE3e Physmem Area",
	.start = 0, /* 0 will be remapped to reserved memory */
	.end = SZ_1M - 1,
	.flags = IORESOURCE_MEM,
	},
	/*
	* The AVE3e requires two regions of 256MB that it considers
	* "invisible". The hardware will not be able to access these
	* adresses, so they should never point to system RAM.
	*/
	{
	.name = "AVE3e Reserved 0",
	.start = 0xd0000000,
	.end = 0xd0000000 + SZ_256M - 1,
	.flags = IORESOURCE_MEM,
	},
	{
	.name = "AVE3e Reserved 1",
	.start = 0xe0000000,
	.end = 0xe0000000 + SZ_256M - 1,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device wdog_device = {
	.name = "wdog",
	.id = -1,
	.num_resources = ARRAY_SIZE(wdog_resources),
	.resource = wdog_resources,
	};

	static struct platform_device i2c0_device = {
	.name = "stddci2c",
	.id = 0,
	.num_resources = ARRAY_SIZE(i2c0_resources),
	.resource = i2c0_resources,
	};

	static struct platform_device i2c1_device = {
	.name = "stddci2c",
	.id = 1,
	.num_resources = ARRAY_SIZE(i2c1_resources),
	.resource = i2c1_resources,
	};

	static struct platform_device gpio_device = {
	.name = "u300-gpio",
	.id = -1,
	.num_resources = ARRAY_SIZE(gpio_resources),
	.resource = gpio_resources,
	};

	static struct platform_device keypad_device = {
	.name = "keypad",
	.id = -1,
	.num_resources = ARRAY_SIZE(keypad_resources),
	.resource = keypad_resources,
	};

	static struct platform_device rtc_device = {
	.name = "rtc0",
	.id = -1,
	.num_resources = ARRAY_SIZE(rtc_resources),
	.resource = rtc_resources,
	};

	static struct platform_device fsmc_device = {
	.name = "nandif",
	.id = -1,
	.num_resources = ARRAY_SIZE(fsmc_resources),
	.resource = fsmc_resources,
	};

	static struct platform_device ave_device = {
	.name = "video_enc",
	.id = -1,
	.num_resources = ARRAY_SIZE(ave_resources),
	.resource = ave_resources,
	};

	/*
	* Notice that AMBA devices are initialized before platform devices.
	*
	*/
	static struct platform_device *platform_devs[] __initdata = {
	&i2c0_device,
	&i2c1_device,
	&keypad_device,
	&rtc_device,
	&gpio_device,
	&fsmc_device,
	&wdog_device,
	&ave_device
	};


	/*
	* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
	* together so some interrupts are connected to the first one and some
	* to the second one.
	*/
	void __init u300_init_irq(void)
	{
	u32 mask[2] = {0, 0};
	int i;

	for (i = 0; i < NR_IRQS; i++)
	set_bit(i, (unsigned long *) &mask[0]);
	u300_enable_intcon_clock();
	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
	}


	/*
	* U300 platforms peripheral handling
	*/
	struct db_chip {
	u16 chipid;
	const char *name;
	};

	/*
	* This is a list of the Digital Baseband chips used in the U300 platform.
	*/
	static struct db_chip db_chips[] __initdata = {
	{
	.chipid = 0xb800,
	.name = "DB3000",
	},
	{
	.chipid = 0xc000,
	.name = "DB3100",
	},
	{
	.chipid = 0xc800,
	.name = "DB3150",
	},
	{
	.chipid = 0xd800,
	.name = "DB3200",
	},
	{
	.chipid = 0xe000,
	.name = "DB3250",
	},
	{
	.chipid = 0xe800,
	.name = "DB3210",
	},
	{
	.chipid = 0xf000,
	.name = "DB3350 P1x",
	},
	{
	.chipid = 0xf100,
	.name = "DB3350 P2x",
	},
	{
	.chipid = 0x0000, /* List terminator */
	.name = NULL,
	}
	};

	static void u300_init_check_chip(void)
	{

	u16 val;
	struct db_chip *chip;
	const char *chipname;
	const char unknown[] = "UNKNOWN";

	/* Read out and print chip ID */
	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
	/* This is in funky bigendian order... */
	val = (val & 0xFFU) << 8 \| (val >> 8);
	chip = db_chips;
	chipname = unknown;

	for ( ; chip->chipid; chip++) {
	if (chip->chipid == (val & 0xFF00U)) {
	chipname = chip->name;
	break;
	}
	}
	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
	"(chip ID 0x%04x)\n", chipname, val);

	#ifdef CONFIG_MACH_U300_BS26
	if ((val & 0xFF00U) != 0xc800) {
	printk(KERN_ERR "Platform configured for BS25/BS26 " \
	"with DB3150 but %s detected, expect problems!",
	chipname);
	}
	#endif
	#ifdef CONFIG_MACH_U300_BS330
	if ((val & 0xFF00U) != 0xd800) {
	printk(KERN_ERR "Platform configured for BS330 " \
	"with DB3200 but %s detected, expect problems!",
	chipname);
	}
	#endif
	#ifdef CONFIG_MACH_U300_BS335
	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
	printk(KERN_ERR "Platform configured for BS365 " \
	" with DB3350 but %s detected, expect problems!",
	chipname);
	}
	#endif
	#ifdef CONFIG_MACH_U300_BS365
	if ((val & 0xFF00U) != 0xe800) {
	printk(KERN_ERR "Platform configured for BS365 " \
	"with DB3210 but %s detected, expect problems!",
	chipname);
	}
	#endif


	}

	/*
	* Some devices and their resources require reserved physical memory from
	* the end of the available RAM. This function traverses the list of devices
	* and assigns actual adresses to these.
	*/
	static void __init u300_assign_physmem(void)
	{
	unsigned long curr_start = __pa(high_memory);
	int i, j;

	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
	for (j = 0; j < platform_devs[i]->num_resources; j++) {
	struct resource *const res =
	&platform_devs[i]->resource[j];

	if (IORESOURCE_MEM == res->flags &&
	0 == res->start) {
	res->start = curr_start;
	res->end += curr_start;
	curr_start += (res->end - res->start + 1);

	printk(KERN_INFO "core.c: Mapping RAM " \
	"%#x-%#x to device %s:%s\n",
	res->start, res->end,
	platform_devs[i]->name, res->name);
	}
	}
	}
	}

	void __init u300_init_devices(void)
	{
	int i;
	u16 val;

	/* Check what platform we run and print some status information */
	u300_init_check_chip();

	/* Set system to run at PLL208, max performance, a known state. */
	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
	/* Wait for the PLL208 to lock if not locked in yet */
	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
	U300_SYSCON_CSR_PLL208_LOCK_IND));

	/* Register the AMBA devices in the AMBA bus abstraction layer */
	u300_clock_primecells();
	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
	struct amba_device *d = amba_devs[i];
	amba_device_register(d, &iomem_resource);
	}
	u300_unclock_primecells();

	u300_assign_physmem();

	/* Register the platform devices */
	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

	#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
	/*
	* Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
	* both subsystems are requesting this mode.
	* If we not share the Acc SDRAM, this is never the case. Therefore
	* enable it here from the App side.
	*/
	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) \|
	U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
	#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
	}

	static int core_module_init(void)
	{
	/*
	* This needs to be initialized later: it needs the input framework
	* to be initialized first.
	*/
	return mmc_init(&mmcsd_device);
	}
	module_init(core_module_init);