| /* |
| * linux/drivers/net/ethernet/ethoc.c |
| * |
| * Copyright (C) 2007-2008 Avionic Design Development GmbH |
| * Copyright (C) 2008-2009 Avionic Design GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Written by Thierry Reding <thierry.reding@avionic-design.de> |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/etherdevice.h> |
| #include <linux/crc32.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include <net/ethoc.h> |
| |
| static int buffer_size = 0x8000; /* 32 KBytes */ |
| module_param(buffer_size, int, 0); |
| MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); |
| |
| /* register offsets */ |
| #define MODER 0x00 |
| #define INT_SOURCE 0x04 |
| #define INT_MASK 0x08 |
| #define IPGT 0x0c |
| #define IPGR1 0x10 |
| #define IPGR2 0x14 |
| #define PACKETLEN 0x18 |
| #define COLLCONF 0x1c |
| #define TX_BD_NUM 0x20 |
| #define CTRLMODER 0x24 |
| #define MIIMODER 0x28 |
| #define MIICOMMAND 0x2c |
| #define MIIADDRESS 0x30 |
| #define MIITX_DATA 0x34 |
| #define MIIRX_DATA 0x38 |
| #define MIISTATUS 0x3c |
| #define MAC_ADDR0 0x40 |
| #define MAC_ADDR1 0x44 |
| #define ETH_HASH0 0x48 |
| #define ETH_HASH1 0x4c |
| #define ETH_TXCTRL 0x50 |
| |
| /* mode register */ |
| #define MODER_RXEN (1 << 0) /* receive enable */ |
| #define MODER_TXEN (1 << 1) /* transmit enable */ |
| #define MODER_NOPRE (1 << 2) /* no preamble */ |
| #define MODER_BRO (1 << 3) /* broadcast address */ |
| #define MODER_IAM (1 << 4) /* individual address mode */ |
| #define MODER_PRO (1 << 5) /* promiscuous mode */ |
| #define MODER_IFG (1 << 6) /* interframe gap for incoming frames */ |
| #define MODER_LOOP (1 << 7) /* loopback */ |
| #define MODER_NBO (1 << 8) /* no back-off */ |
| #define MODER_EDE (1 << 9) /* excess defer enable */ |
| #define MODER_FULLD (1 << 10) /* full duplex */ |
| #define MODER_RESET (1 << 11) /* FIXME: reset (undocumented) */ |
| #define MODER_DCRC (1 << 12) /* delayed CRC enable */ |
| #define MODER_CRC (1 << 13) /* CRC enable */ |
| #define MODER_HUGE (1 << 14) /* huge packets enable */ |
| #define MODER_PAD (1 << 15) /* padding enabled */ |
| #define MODER_RSM (1 << 16) /* receive small packets */ |
| |
| /* interrupt source and mask registers */ |
| #define INT_MASK_TXF (1 << 0) /* transmit frame */ |
| #define INT_MASK_TXE (1 << 1) /* transmit error */ |
| #define INT_MASK_RXF (1 << 2) /* receive frame */ |
| #define INT_MASK_RXE (1 << 3) /* receive error */ |
| #define INT_MASK_BUSY (1 << 4) |
| #define INT_MASK_TXC (1 << 5) /* transmit control frame */ |
| #define INT_MASK_RXC (1 << 6) /* receive control frame */ |
| |
| #define INT_MASK_TX (INT_MASK_TXF | INT_MASK_TXE) |
| #define INT_MASK_RX (INT_MASK_RXF | INT_MASK_RXE) |
| |
| #define INT_MASK_ALL ( \ |
| INT_MASK_TXF | INT_MASK_TXE | \ |
| INT_MASK_RXF | INT_MASK_RXE | \ |
| INT_MASK_TXC | INT_MASK_RXC | \ |
| INT_MASK_BUSY \ |
| ) |
| |
| /* packet length register */ |
| #define PACKETLEN_MIN(min) (((min) & 0xffff) << 16) |
| #define PACKETLEN_MAX(max) (((max) & 0xffff) << 0) |
| #define PACKETLEN_MIN_MAX(min, max) (PACKETLEN_MIN(min) | \ |
| PACKETLEN_MAX(max)) |
| |
| /* transmit buffer number register */ |
| #define TX_BD_NUM_VAL(x) (((x) <= 0x80) ? (x) : 0x80) |
| |
| /* control module mode register */ |
| #define CTRLMODER_PASSALL (1 << 0) /* pass all receive frames */ |
| #define CTRLMODER_RXFLOW (1 << 1) /* receive control flow */ |
| #define CTRLMODER_TXFLOW (1 << 2) /* transmit control flow */ |
| |
| /* MII mode register */ |
| #define MIIMODER_CLKDIV(x) ((x) & 0xfe) /* needs to be an even number */ |
| #define MIIMODER_NOPRE (1 << 8) /* no preamble */ |
| |
| /* MII command register */ |
| #define MIICOMMAND_SCAN (1 << 0) /* scan status */ |
| #define MIICOMMAND_READ (1 << 1) /* read status */ |
| #define MIICOMMAND_WRITE (1 << 2) /* write control data */ |
| |
| /* MII address register */ |
| #define MIIADDRESS_FIAD(x) (((x) & 0x1f) << 0) |
| #define MIIADDRESS_RGAD(x) (((x) & 0x1f) << 8) |
| #define MIIADDRESS_ADDR(phy, reg) (MIIADDRESS_FIAD(phy) | \ |
| MIIADDRESS_RGAD(reg)) |
| |
| /* MII transmit data register */ |
| #define MIITX_DATA_VAL(x) ((x) & 0xffff) |
| |
| /* MII receive data register */ |
| #define MIIRX_DATA_VAL(x) ((x) & 0xffff) |
| |
| /* MII status register */ |
| #define MIISTATUS_LINKFAIL (1 << 0) |
| #define MIISTATUS_BUSY (1 << 1) |
| #define MIISTATUS_INVALID (1 << 2) |
| |
| /* TX buffer descriptor */ |
| #define TX_BD_CS (1 << 0) /* carrier sense lost */ |
| #define TX_BD_DF (1 << 1) /* defer indication */ |
| #define TX_BD_LC (1 << 2) /* late collision */ |
| #define TX_BD_RL (1 << 3) /* retransmission limit */ |
| #define TX_BD_RETRY_MASK (0x00f0) |
| #define TX_BD_RETRY(x) (((x) & 0x00f0) >> 4) |
| #define TX_BD_UR (1 << 8) /* transmitter underrun */ |
| #define TX_BD_CRC (1 << 11) /* TX CRC enable */ |
| #define TX_BD_PAD (1 << 12) /* pad enable for short packets */ |
| #define TX_BD_WRAP (1 << 13) |
| #define TX_BD_IRQ (1 << 14) /* interrupt request enable */ |
| #define TX_BD_READY (1 << 15) /* TX buffer ready */ |
| #define TX_BD_LEN(x) (((x) & 0xffff) << 16) |
| #define TX_BD_LEN_MASK (0xffff << 16) |
| |
| #define TX_BD_STATS (TX_BD_CS | TX_BD_DF | TX_BD_LC | \ |
| TX_BD_RL | TX_BD_RETRY_MASK | TX_BD_UR) |
| |
| /* RX buffer descriptor */ |
| #define RX_BD_LC (1 << 0) /* late collision */ |
| #define RX_BD_CRC (1 << 1) /* RX CRC error */ |
| #define RX_BD_SF (1 << 2) /* short frame */ |
| #define RX_BD_TL (1 << 3) /* too long */ |
| #define RX_BD_DN (1 << 4) /* dribble nibble */ |
| #define RX_BD_IS (1 << 5) /* invalid symbol */ |
| #define RX_BD_OR (1 << 6) /* receiver overrun */ |
| #define RX_BD_MISS (1 << 7) |
| #define RX_BD_CF (1 << 8) /* control frame */ |
| #define RX_BD_WRAP (1 << 13) |
| #define RX_BD_IRQ (1 << 14) /* interrupt request enable */ |
| #define RX_BD_EMPTY (1 << 15) |
| #define RX_BD_LEN(x) (((x) & 0xffff) << 16) |
| |
| #define RX_BD_STATS (RX_BD_LC | RX_BD_CRC | RX_BD_SF | RX_BD_TL | \ |
| RX_BD_DN | RX_BD_IS | RX_BD_OR | RX_BD_MISS) |
| |
| #define ETHOC_BUFSIZ 1536 |
| #define ETHOC_ZLEN 64 |
| #define ETHOC_BD_BASE 0x400 |
| #define ETHOC_TIMEOUT (HZ / 2) |
| #define ETHOC_MII_TIMEOUT (1 + (HZ / 5)) |
| |
| /** |
| * struct ethoc - driver-private device structure |
| * @iobase: pointer to I/O memory region |
| * @membase: pointer to buffer memory region |
| * @dma_alloc: dma allocated buffer size |
| * @io_region_size: I/O memory region size |
| * @num_tx: number of send buffers |
| * @cur_tx: last send buffer written |
| * @dty_tx: last buffer actually sent |
| * @num_rx: number of receive buffers |
| * @cur_rx: current receive buffer |
| * @vma: pointer to array of virtual memory addresses for buffers |
| * @netdev: pointer to network device structure |
| * @napi: NAPI structure |
| * @msg_enable: device state flags |
| * @lock: device lock |
| * @phy: attached PHY |
| * @mdio: MDIO bus for PHY access |
| * @phy_id: address of attached PHY |
| */ |
| struct ethoc { |
| void __iomem *iobase; |
| void __iomem *membase; |
| int dma_alloc; |
| resource_size_t io_region_size; |
| |
| unsigned int num_tx; |
| unsigned int cur_tx; |
| unsigned int dty_tx; |
| |
| unsigned int num_rx; |
| unsigned int cur_rx; |
| |
| void **vma; |
| |
| struct net_device *netdev; |
| struct napi_struct napi; |
| u32 msg_enable; |
| |
| spinlock_t lock; |
| |
| struct phy_device *phy; |
| struct mii_bus *mdio; |
| s8 phy_id; |
| }; |
| |
| /** |
| * struct ethoc_bd - buffer descriptor |
| * @stat: buffer statistics |
| * @addr: physical memory address |
| */ |
| struct ethoc_bd { |
| u32 stat; |
| u32 addr; |
| }; |
| |
| static inline u32 ethoc_read(struct ethoc *dev, loff_t offset) |
| { |
| return ioread32(dev->iobase + offset); |
| } |
| |
| static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) |
| { |
| iowrite32(data, dev->iobase + offset); |
| } |
| |
| static inline void ethoc_read_bd(struct ethoc *dev, int index, |
| struct ethoc_bd *bd) |
| { |
| loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); |
| bd->stat = ethoc_read(dev, offset + 0); |
| bd->addr = ethoc_read(dev, offset + 4); |
| } |
| |
| static inline void ethoc_write_bd(struct ethoc *dev, int index, |
| const struct ethoc_bd *bd) |
| { |
| loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); |
| ethoc_write(dev, offset + 0, bd->stat); |
| ethoc_write(dev, offset + 4, bd->addr); |
| } |
| |
| static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask) |
| { |
| u32 imask = ethoc_read(dev, INT_MASK); |
| imask |= mask; |
| ethoc_write(dev, INT_MASK, imask); |
| } |
| |
| static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask) |
| { |
| u32 imask = ethoc_read(dev, INT_MASK); |
| imask &= ~mask; |
| ethoc_write(dev, INT_MASK, imask); |
| } |
| |
| static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask) |
| { |
| ethoc_write(dev, INT_SOURCE, mask); |
| } |
| |
| static inline void ethoc_enable_rx_and_tx(struct ethoc *dev) |
| { |
| u32 mode = ethoc_read(dev, MODER); |
| mode |= MODER_RXEN | MODER_TXEN; |
| ethoc_write(dev, MODER, mode); |
| } |
| |
| static inline void ethoc_disable_rx_and_tx(struct ethoc *dev) |
| { |
| u32 mode = ethoc_read(dev, MODER); |
| mode &= ~(MODER_RXEN | MODER_TXEN); |
| ethoc_write(dev, MODER, mode); |
| } |
| |
| static int ethoc_init_ring(struct ethoc *dev, unsigned long mem_start) |
| { |
| struct ethoc_bd bd; |
| int i; |
| void *vma; |
| |
| dev->cur_tx = 0; |
| dev->dty_tx = 0; |
| dev->cur_rx = 0; |
| |
| ethoc_write(dev, TX_BD_NUM, dev->num_tx); |
| |
| /* setup transmission buffers */ |
| bd.addr = mem_start; |
| bd.stat = TX_BD_IRQ | TX_BD_CRC; |
| vma = dev->membase; |
| |
| for (i = 0; i < dev->num_tx; i++) { |
| if (i == dev->num_tx - 1) |
| bd.stat |= TX_BD_WRAP; |
| |
| ethoc_write_bd(dev, i, &bd); |
| bd.addr += ETHOC_BUFSIZ; |
| |
| dev->vma[i] = vma; |
| vma += ETHOC_BUFSIZ; |
| } |
| |
| bd.stat = RX_BD_EMPTY | RX_BD_IRQ; |
| |
| for (i = 0; i < dev->num_rx; i++) { |
| if (i == dev->num_rx - 1) |
| bd.stat |= RX_BD_WRAP; |
| |
| ethoc_write_bd(dev, dev->num_tx + i, &bd); |
| bd.addr += ETHOC_BUFSIZ; |
| |
| dev->vma[dev->num_tx + i] = vma; |
| vma += ETHOC_BUFSIZ; |
| } |
| |
| return 0; |
| } |
| |
| static int ethoc_reset(struct ethoc *dev) |
| { |
| u32 mode; |
| |
| /* TODO: reset controller? */ |
| |
| ethoc_disable_rx_and_tx(dev); |
| |
| /* TODO: setup registers */ |
| |
| /* enable FCS generation and automatic padding */ |
| mode = ethoc_read(dev, MODER); |
| mode |= MODER_CRC | MODER_PAD; |
| ethoc_write(dev, MODER, mode); |
| |
| /* set full-duplex mode */ |
| mode = ethoc_read(dev, MODER); |
| mode |= MODER_FULLD; |
| ethoc_write(dev, MODER, mode); |
| ethoc_write(dev, IPGT, 0x15); |
| |
| ethoc_ack_irq(dev, INT_MASK_ALL); |
| ethoc_enable_irq(dev, INT_MASK_ALL); |
| ethoc_enable_rx_and_tx(dev); |
| return 0; |
| } |
| |
| static unsigned int ethoc_update_rx_stats(struct ethoc *dev, |
| struct ethoc_bd *bd) |
| { |
| struct net_device *netdev = dev->netdev; |
| unsigned int ret = 0; |
| |
| if (bd->stat & RX_BD_TL) { |
| dev_err(&netdev->dev, "RX: frame too long\n"); |
| netdev->stats.rx_length_errors++; |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_SF) { |
| dev_err(&netdev->dev, "RX: frame too short\n"); |
| netdev->stats.rx_length_errors++; |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_DN) { |
| dev_err(&netdev->dev, "RX: dribble nibble\n"); |
| netdev->stats.rx_frame_errors++; |
| } |
| |
| if (bd->stat & RX_BD_CRC) { |
| dev_err(&netdev->dev, "RX: wrong CRC\n"); |
| netdev->stats.rx_crc_errors++; |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_OR) { |
| dev_err(&netdev->dev, "RX: overrun\n"); |
| netdev->stats.rx_over_errors++; |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_MISS) |
| netdev->stats.rx_missed_errors++; |
| |
| if (bd->stat & RX_BD_LC) { |
| dev_err(&netdev->dev, "RX: late collision\n"); |
| netdev->stats.collisions++; |
| ret++; |
| } |
| |
| return ret; |
| } |
| |
| static int ethoc_rx(struct net_device *dev, int limit) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| int count; |
| |
| for (count = 0; count < limit; ++count) { |
| unsigned int entry; |
| struct ethoc_bd bd; |
| |
| entry = priv->num_tx + priv->cur_rx; |
| ethoc_read_bd(priv, entry, &bd); |
| if (bd.stat & RX_BD_EMPTY) { |
| ethoc_ack_irq(priv, INT_MASK_RX); |
| /* If packet (interrupt) came in between checking |
| * BD_EMTPY and clearing the interrupt source, then we |
| * risk missing the packet as the RX interrupt won't |
| * trigger right away when we reenable it; hence, check |
| * BD_EMTPY here again to make sure there isn't such a |
| * packet waiting for us... |
| */ |
| ethoc_read_bd(priv, entry, &bd); |
| if (bd.stat & RX_BD_EMPTY) |
| break; |
| } |
| |
| if (ethoc_update_rx_stats(priv, &bd) == 0) { |
| int size = bd.stat >> 16; |
| struct sk_buff *skb; |
| |
| size -= 4; /* strip the CRC */ |
| skb = netdev_alloc_skb_ip_align(dev, size); |
| |
| if (likely(skb)) { |
| void *src = priv->vma[entry]; |
| memcpy_fromio(skb_put(skb, size), src, size); |
| skb->protocol = eth_type_trans(skb, dev); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += size; |
| netif_receive_skb(skb); |
| } else { |
| if (net_ratelimit()) |
| dev_warn(&dev->dev, |
| "low on memory - packet dropped\n"); |
| |
| dev->stats.rx_dropped++; |
| break; |
| } |
| } |
| |
| /* clear the buffer descriptor so it can be reused */ |
| bd.stat &= ~RX_BD_STATS; |
| bd.stat |= RX_BD_EMPTY; |
| ethoc_write_bd(priv, entry, &bd); |
| if (++priv->cur_rx == priv->num_rx) |
| priv->cur_rx = 0; |
| } |
| |
| return count; |
| } |
| |
| static void ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd) |
| { |
| struct net_device *netdev = dev->netdev; |
| |
| if (bd->stat & TX_BD_LC) { |
| dev_err(&netdev->dev, "TX: late collision\n"); |
| netdev->stats.tx_window_errors++; |
| } |
| |
| if (bd->stat & TX_BD_RL) { |
| dev_err(&netdev->dev, "TX: retransmit limit\n"); |
| netdev->stats.tx_aborted_errors++; |
| } |
| |
| if (bd->stat & TX_BD_UR) { |
| dev_err(&netdev->dev, "TX: underrun\n"); |
| netdev->stats.tx_fifo_errors++; |
| } |
| |
| if (bd->stat & TX_BD_CS) { |
| dev_err(&netdev->dev, "TX: carrier sense lost\n"); |
| netdev->stats.tx_carrier_errors++; |
| } |
| |
| if (bd->stat & TX_BD_STATS) |
| netdev->stats.tx_errors++; |
| |
| netdev->stats.collisions += (bd->stat >> 4) & 0xf; |
| netdev->stats.tx_bytes += bd->stat >> 16; |
| netdev->stats.tx_packets++; |
| } |
| |
| static int ethoc_tx(struct net_device *dev, int limit) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| int count; |
| struct ethoc_bd bd; |
| |
| for (count = 0; count < limit; ++count) { |
| unsigned int entry; |
| |
| entry = priv->dty_tx & (priv->num_tx-1); |
| |
| ethoc_read_bd(priv, entry, &bd); |
| |
| if (bd.stat & TX_BD_READY || (priv->dty_tx == priv->cur_tx)) { |
| ethoc_ack_irq(priv, INT_MASK_TX); |
| /* If interrupt came in between reading in the BD |
| * and clearing the interrupt source, then we risk |
| * missing the event as the TX interrupt won't trigger |
| * right away when we reenable it; hence, check |
| * BD_EMPTY here again to make sure there isn't such an |
| * event pending... |
| */ |
| ethoc_read_bd(priv, entry, &bd); |
| if (bd.stat & TX_BD_READY || |
| (priv->dty_tx == priv->cur_tx)) |
| break; |
| } |
| |
| ethoc_update_tx_stats(priv, &bd); |
| priv->dty_tx++; |
| } |
| |
| if ((priv->cur_tx - priv->dty_tx) <= (priv->num_tx / 2)) |
| netif_wake_queue(dev); |
| |
| return count; |
| } |
| |
| static irqreturn_t ethoc_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct ethoc *priv = netdev_priv(dev); |
| u32 pending; |
| u32 mask; |
| |
| /* Figure out what triggered the interrupt... |
| * The tricky bit here is that the interrupt source bits get |
| * set in INT_SOURCE for an event regardless of whether that |
| * event is masked or not. Thus, in order to figure out what |
| * triggered the interrupt, we need to remove the sources |
| * for all events that are currently masked. This behaviour |
| * is not particularly well documented but reasonable... |
| */ |
| mask = ethoc_read(priv, INT_MASK); |
| pending = ethoc_read(priv, INT_SOURCE); |
| pending &= mask; |
| |
| if (unlikely(pending == 0)) |
| return IRQ_NONE; |
| |
| ethoc_ack_irq(priv, pending); |
| |
| /* We always handle the dropped packet interrupt */ |
| if (pending & INT_MASK_BUSY) { |
| dev_err(&dev->dev, "packet dropped\n"); |
| dev->stats.rx_dropped++; |
| } |
| |
| /* Handle receive/transmit event by switching to polling */ |
| if (pending & (INT_MASK_TX | INT_MASK_RX)) { |
| ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX); |
| napi_schedule(&priv->napi); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ethoc_get_mac_address(struct net_device *dev, void *addr) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| u8 *mac = (u8 *)addr; |
| u32 reg; |
| |
| reg = ethoc_read(priv, MAC_ADDR0); |
| mac[2] = (reg >> 24) & 0xff; |
| mac[3] = (reg >> 16) & 0xff; |
| mac[4] = (reg >> 8) & 0xff; |
| mac[5] = (reg >> 0) & 0xff; |
| |
| reg = ethoc_read(priv, MAC_ADDR1); |
| mac[0] = (reg >> 8) & 0xff; |
| mac[1] = (reg >> 0) & 0xff; |
| |
| return 0; |
| } |
| |
| static int ethoc_poll(struct napi_struct *napi, int budget) |
| { |
| struct ethoc *priv = container_of(napi, struct ethoc, napi); |
| int rx_work_done = 0; |
| int tx_work_done = 0; |
| |
| rx_work_done = ethoc_rx(priv->netdev, budget); |
| tx_work_done = ethoc_tx(priv->netdev, budget); |
| |
| if (rx_work_done < budget && tx_work_done < budget) { |
| napi_complete(napi); |
| ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX); |
| } |
| |
| return rx_work_done; |
| } |
| |
| static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg) |
| { |
| struct ethoc *priv = bus->priv; |
| int i; |
| |
| ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg)); |
| ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ); |
| |
| for (i = 0; i < 5; i++) { |
| u32 status = ethoc_read(priv, MIISTATUS); |
| if (!(status & MIISTATUS_BUSY)) { |
| u32 data = ethoc_read(priv, MIIRX_DATA); |
| /* reset MII command register */ |
| ethoc_write(priv, MIICOMMAND, 0); |
| return data; |
| } |
| usleep_range(100, 200); |
| } |
| |
| return -EBUSY; |
| } |
| |
| static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val) |
| { |
| struct ethoc *priv = bus->priv; |
| int i; |
| |
| ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg)); |
| ethoc_write(priv, MIITX_DATA, val); |
| ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE); |
| |
| for (i = 0; i < 5; i++) { |
| u32 stat = ethoc_read(priv, MIISTATUS); |
| if (!(stat & MIISTATUS_BUSY)) { |
| /* reset MII command register */ |
| ethoc_write(priv, MIICOMMAND, 0); |
| return 0; |
| } |
| usleep_range(100, 200); |
| } |
| |
| return -EBUSY; |
| } |
| |
| static int ethoc_mdio_reset(struct mii_bus *bus) |
| { |
| return 0; |
| } |
| |
| static void ethoc_mdio_poll(struct net_device *dev) |
| { |
| } |
| |
| static int ethoc_mdio_probe(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| struct phy_device *phy; |
| int err; |
| |
| if (priv->phy_id != -1) |
| phy = priv->mdio->phy_map[priv->phy_id]; |
| else |
| phy = phy_find_first(priv->mdio); |
| |
| if (!phy) { |
| dev_err(&dev->dev, "no PHY found\n"); |
| return -ENXIO; |
| } |
| |
| err = phy_connect_direct(dev, phy, ethoc_mdio_poll, |
| PHY_INTERFACE_MODE_GMII); |
| if (err) { |
| dev_err(&dev->dev, "could not attach to PHY\n"); |
| return err; |
| } |
| |
| priv->phy = phy; |
| return 0; |
| } |
| |
| static int ethoc_open(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| int ret; |
| |
| ret = request_irq(dev->irq, ethoc_interrupt, IRQF_SHARED, |
| dev->name, dev); |
| if (ret) |
| return ret; |
| |
| ethoc_init_ring(priv, dev->mem_start); |
| ethoc_reset(priv); |
| |
| if (netif_queue_stopped(dev)) { |
| dev_dbg(&dev->dev, " resuming queue\n"); |
| netif_wake_queue(dev); |
| } else { |
| dev_dbg(&dev->dev, " starting queue\n"); |
| netif_start_queue(dev); |
| } |
| |
| phy_start(priv->phy); |
| napi_enable(&priv->napi); |
| |
| if (netif_msg_ifup(priv)) { |
| dev_info(&dev->dev, "I/O: %08lx Memory: %08lx-%08lx\n", |
| dev->base_addr, dev->mem_start, dev->mem_end); |
| } |
| |
| return 0; |
| } |
| |
| static int ethoc_stop(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| |
| napi_disable(&priv->napi); |
| |
| if (priv->phy) |
| phy_stop(priv->phy); |
| |
| ethoc_disable_rx_and_tx(priv); |
| free_irq(dev->irq, dev); |
| |
| if (!netif_queue_stopped(dev)) |
| netif_stop_queue(dev); |
| |
| return 0; |
| } |
| |
| static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| struct mii_ioctl_data *mdio = if_mii(ifr); |
| struct phy_device *phy = NULL; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (cmd != SIOCGMIIPHY) { |
| if (mdio->phy_id >= PHY_MAX_ADDR) |
| return -ERANGE; |
| |
| phy = priv->mdio->phy_map[mdio->phy_id]; |
| if (!phy) |
| return -ENODEV; |
| } else { |
| phy = priv->phy; |
| } |
| |
| return phy_mii_ioctl(phy, ifr, cmd); |
| } |
| |
| static int ethoc_config(struct net_device *dev, struct ifmap *map) |
| { |
| return -ENOSYS; |
| } |
| |
| static void ethoc_do_set_mac_address(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| unsigned char *mac = dev->dev_addr; |
| |
| ethoc_write(priv, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) | |
| (mac[4] << 8) | (mac[5] << 0)); |
| ethoc_write(priv, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0)); |
| } |
| |
| static int ethoc_set_mac_address(struct net_device *dev, void *p) |
| { |
| const struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| ethoc_do_set_mac_address(dev); |
| return 0; |
| } |
| |
| static void ethoc_set_multicast_list(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| u32 mode = ethoc_read(priv, MODER); |
| struct netdev_hw_addr *ha; |
| u32 hash[2] = { 0, 0 }; |
| |
| /* set loopback mode if requested */ |
| if (dev->flags & IFF_LOOPBACK) |
| mode |= MODER_LOOP; |
| else |
| mode &= ~MODER_LOOP; |
| |
| /* receive broadcast frames if requested */ |
| if (dev->flags & IFF_BROADCAST) |
| mode &= ~MODER_BRO; |
| else |
| mode |= MODER_BRO; |
| |
| /* enable promiscuous mode if requested */ |
| if (dev->flags & IFF_PROMISC) |
| mode |= MODER_PRO; |
| else |
| mode &= ~MODER_PRO; |
| |
| ethoc_write(priv, MODER, mode); |
| |
| /* receive multicast frames */ |
| if (dev->flags & IFF_ALLMULTI) { |
| hash[0] = 0xffffffff; |
| hash[1] = 0xffffffff; |
| } else { |
| netdev_for_each_mc_addr(ha, dev) { |
| u32 crc = ether_crc(ETH_ALEN, ha->addr); |
| int bit = (crc >> 26) & 0x3f; |
| hash[bit >> 5] |= 1 << (bit & 0x1f); |
| } |
| } |
| |
| ethoc_write(priv, ETH_HASH0, hash[0]); |
| ethoc_write(priv, ETH_HASH1, hash[1]); |
| } |
| |
| static int ethoc_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| return -ENOSYS; |
| } |
| |
| static void ethoc_tx_timeout(struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| u32 pending = ethoc_read(priv, INT_SOURCE); |
| if (likely(pending)) |
| ethoc_interrupt(dev->irq, dev); |
| } |
| |
| static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ethoc *priv = netdev_priv(dev); |
| struct ethoc_bd bd; |
| unsigned int entry; |
| void *dest; |
| |
| if (unlikely(skb->len > ETHOC_BUFSIZ)) { |
| dev->stats.tx_errors++; |
| goto out; |
| } |
| |
| entry = priv->cur_tx % priv->num_tx; |
| spin_lock_irq(&priv->lock); |
| priv->cur_tx++; |
| |
| ethoc_read_bd(priv, entry, &bd); |
| if (unlikely(skb->len < ETHOC_ZLEN)) |
| bd.stat |= TX_BD_PAD; |
| else |
| bd.stat &= ~TX_BD_PAD; |
| |
| dest = priv->vma[entry]; |
| memcpy_toio(dest, skb->data, skb->len); |
| |
| bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK); |
| bd.stat |= TX_BD_LEN(skb->len); |
| ethoc_write_bd(priv, entry, &bd); |
| |
| bd.stat |= TX_BD_READY; |
| ethoc_write_bd(priv, entry, &bd); |
| |
| if (priv->cur_tx == (priv->dty_tx + priv->num_tx)) { |
| dev_dbg(&dev->dev, "stopping queue\n"); |
| netif_stop_queue(dev); |
| } |
| |
| spin_unlock_irq(&priv->lock); |
| skb_tx_timestamp(skb); |
| out: |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| static const struct net_device_ops ethoc_netdev_ops = { |
| .ndo_open = ethoc_open, |
| .ndo_stop = ethoc_stop, |
| .ndo_do_ioctl = ethoc_ioctl, |
| .ndo_set_config = ethoc_config, |
| .ndo_set_mac_address = ethoc_set_mac_address, |
| .ndo_set_rx_mode = ethoc_set_multicast_list, |
| .ndo_change_mtu = ethoc_change_mtu, |
| .ndo_tx_timeout = ethoc_tx_timeout, |
| .ndo_start_xmit = ethoc_start_xmit, |
| }; |
| |
| /** |
| * ethoc_probe - initialize OpenCores ethernet MAC |
| * pdev: platform device |
| */ |
| static int ethoc_probe(struct platform_device *pdev) |
| { |
| struct net_device *netdev = NULL; |
| struct resource *res = NULL; |
| struct resource *mmio = NULL; |
| struct resource *mem = NULL; |
| struct ethoc *priv = NULL; |
| unsigned int phy; |
| int num_bd; |
| int ret = 0; |
| bool random_mac = false; |
| |
| /* allocate networking device */ |
| netdev = alloc_etherdev(sizeof(struct ethoc)); |
| if (!netdev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| platform_set_drvdata(pdev, netdev); |
| |
| /* obtain I/O memory space */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "cannot obtain I/O memory space\n"); |
| ret = -ENXIO; |
| goto free; |
| } |
| |
| mmio = devm_request_mem_region(&pdev->dev, res->start, |
| resource_size(res), res->name); |
| if (!mmio) { |
| dev_err(&pdev->dev, "cannot request I/O memory space\n"); |
| ret = -ENXIO; |
| goto free; |
| } |
| |
| netdev->base_addr = mmio->start; |
| |
| /* obtain buffer memory space */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| mem = devm_request_mem_region(&pdev->dev, res->start, |
| resource_size(res), res->name); |
| if (!mem) { |
| dev_err(&pdev->dev, "cannot request memory space\n"); |
| ret = -ENXIO; |
| goto free; |
| } |
| |
| netdev->mem_start = mem->start; |
| netdev->mem_end = mem->end; |
| } |
| |
| |
| /* obtain device IRQ number */ |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "cannot obtain IRQ\n"); |
| ret = -ENXIO; |
| goto free; |
| } |
| |
| netdev->irq = res->start; |
| |
| /* setup driver-private data */ |
| priv = netdev_priv(netdev); |
| priv->netdev = netdev; |
| priv->dma_alloc = 0; |
| priv->io_region_size = resource_size(mmio); |
| |
| priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr, |
| resource_size(mmio)); |
| if (!priv->iobase) { |
| dev_err(&pdev->dev, "cannot remap I/O memory space\n"); |
| ret = -ENXIO; |
| goto error; |
| } |
| |
| if (netdev->mem_end) { |
| priv->membase = devm_ioremap_nocache(&pdev->dev, |
| netdev->mem_start, resource_size(mem)); |
| if (!priv->membase) { |
| dev_err(&pdev->dev, "cannot remap memory space\n"); |
| ret = -ENXIO; |
| goto error; |
| } |
| } else { |
| /* Allocate buffer memory */ |
| priv->membase = dmam_alloc_coherent(&pdev->dev, |
| buffer_size, (void *)&netdev->mem_start, |
| GFP_KERNEL); |
| if (!priv->membase) { |
| dev_err(&pdev->dev, "cannot allocate %dB buffer\n", |
| buffer_size); |
| ret = -ENOMEM; |
| goto error; |
| } |
| netdev->mem_end = netdev->mem_start + buffer_size; |
| priv->dma_alloc = buffer_size; |
| } |
| |
| /* calculate the number of TX/RX buffers, maximum 128 supported */ |
| num_bd = min_t(unsigned int, |
| 128, (netdev->mem_end - netdev->mem_start + 1) / ETHOC_BUFSIZ); |
| if (num_bd < 4) { |
| ret = -ENODEV; |
| goto error; |
| } |
| /* num_tx must be a power of two */ |
| priv->num_tx = rounddown_pow_of_two(num_bd >> 1); |
| priv->num_rx = num_bd - priv->num_tx; |
| |
| dev_dbg(&pdev->dev, "ethoc: num_tx: %d num_rx: %d\n", |
| priv->num_tx, priv->num_rx); |
| |
| priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void *), GFP_KERNEL); |
| if (!priv->vma) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| /* Allow the platform setup code to pass in a MAC address. */ |
| if (pdev->dev.platform_data) { |
| struct ethoc_platform_data *pdata = pdev->dev.platform_data; |
| memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN); |
| priv->phy_id = pdata->phy_id; |
| } else { |
| priv->phy_id = -1; |
| |
| #ifdef CONFIG_OF |
| { |
| const uint8_t *mac; |
| |
| mac = of_get_property(pdev->dev.of_node, |
| "local-mac-address", |
| NULL); |
| if (mac) |
| memcpy(netdev->dev_addr, mac, IFHWADDRLEN); |
| } |
| #endif |
| } |
| |
| /* Check that the given MAC address is valid. If it isn't, read the |
| * current MAC from the controller. |
| */ |
| if (!is_valid_ether_addr(netdev->dev_addr)) |
| ethoc_get_mac_address(netdev, netdev->dev_addr); |
| |
| /* Check the MAC again for validity, if it still isn't choose and |
| * program a random one. |
| */ |
| if (!is_valid_ether_addr(netdev->dev_addr)) { |
| eth_random_addr(netdev->dev_addr); |
| random_mac = true; |
| } |
| |
| ethoc_do_set_mac_address(netdev); |
| |
| if (random_mac) |
| netdev->addr_assign_type = NET_ADDR_RANDOM; |
| |
| /* register MII bus */ |
| priv->mdio = mdiobus_alloc(); |
| if (!priv->mdio) { |
| ret = -ENOMEM; |
| goto free; |
| } |
| |
| priv->mdio->name = "ethoc-mdio"; |
| snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "%s-%d", |
| priv->mdio->name, pdev->id); |
| priv->mdio->read = ethoc_mdio_read; |
| priv->mdio->write = ethoc_mdio_write; |
| priv->mdio->reset = ethoc_mdio_reset; |
| priv->mdio->priv = priv; |
| |
| priv->mdio->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); |
| if (!priv->mdio->irq) { |
| ret = -ENOMEM; |
| goto free_mdio; |
| } |
| |
| for (phy = 0; phy < PHY_MAX_ADDR; phy++) |
| priv->mdio->irq[phy] = PHY_POLL; |
| |
| ret = mdiobus_register(priv->mdio); |
| if (ret) { |
| dev_err(&netdev->dev, "failed to register MDIO bus\n"); |
| goto free_mdio; |
| } |
| |
| ret = ethoc_mdio_probe(netdev); |
| if (ret) { |
| dev_err(&netdev->dev, "failed to probe MDIO bus\n"); |
| goto error; |
| } |
| |
| ether_setup(netdev); |
| |
| /* setup the net_device structure */ |
| netdev->netdev_ops = ðoc_netdev_ops; |
| netdev->watchdog_timeo = ETHOC_TIMEOUT; |
| netdev->features |= 0; |
| |
| /* setup NAPI */ |
| netif_napi_add(netdev, &priv->napi, ethoc_poll, 64); |
| |
| spin_lock_init(&priv->lock); |
| |
| ret = register_netdev(netdev); |
| if (ret < 0) { |
| dev_err(&netdev->dev, "failed to register interface\n"); |
| goto error2; |
| } |
| |
| goto out; |
| |
| error2: |
| netif_napi_del(&priv->napi); |
| error: |
| mdiobus_unregister(priv->mdio); |
| free_mdio: |
| kfree(priv->mdio->irq); |
| mdiobus_free(priv->mdio); |
| free: |
| free_netdev(netdev); |
| out: |
| return ret; |
| } |
| |
| /** |
| * ethoc_remove - shutdown OpenCores ethernet MAC |
| * @pdev: platform device |
| */ |
| static int ethoc_remove(struct platform_device *pdev) |
| { |
| struct net_device *netdev = platform_get_drvdata(pdev); |
| struct ethoc *priv = netdev_priv(netdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| if (netdev) { |
| netif_napi_del(&priv->napi); |
| phy_disconnect(priv->phy); |
| priv->phy = NULL; |
| |
| if (priv->mdio) { |
| mdiobus_unregister(priv->mdio); |
| kfree(priv->mdio->irq); |
| mdiobus_free(priv->mdio); |
| } |
| unregister_netdev(netdev); |
| free_netdev(netdev); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ethoc_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| return -ENOSYS; |
| } |
| |
| static int ethoc_resume(struct platform_device *pdev) |
| { |
| return -ENOSYS; |
| } |
| #else |
| # define ethoc_suspend NULL |
| # define ethoc_resume NULL |
| #endif |
| |
| static struct of_device_id ethoc_match[] = { |
| { .compatible = "opencores,ethoc", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ethoc_match); |
| |
| static struct platform_driver ethoc_driver = { |
| .probe = ethoc_probe, |
| .remove = ethoc_remove, |
| .suspend = ethoc_suspend, |
| .resume = ethoc_resume, |
| .driver = { |
| .name = "ethoc", |
| .owner = THIS_MODULE, |
| .of_match_table = ethoc_match, |
| }, |
| }; |
| |
| module_platform_driver(ethoc_driver); |
| |
| MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); |
| MODULE_DESCRIPTION("OpenCores Ethernet MAC driver"); |
| MODULE_LICENSE("GPL v2"); |
| |