| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| /* DO NOT EDIT!! - this file automatically generated |
| * from .s file by awk -f s2h.awk |
| */ |
| /************************************************************************** |
| * * Copyright © ARM Limited 1998. All rights reserved. |
| * ***********************************************************************/ |
| /* ************************************************************************ |
| * |
| * Integrator address map |
| * |
| * NOTE: This is a multi-hosted header file for use with uHAL and |
| * supported debuggers. |
| * |
| * ***********************************************************************/ |
| |
| #ifndef __address_h |
| #define __address_h 1 |
| |
| /* ======================================================================== |
| * Integrator definitions |
| * ======================================================================== |
| * ------------------------------------------------------------------------ |
| * Memory definitions |
| * ------------------------------------------------------------------------ |
| * Integrator memory map |
| * |
| */ |
| #define INTEGRATOR_BOOT_ROM_LO 0x00000000 |
| #define INTEGRATOR_BOOT_ROM_HI 0x20000000 |
| #define INTEGRATOR_BOOT_ROM_BASE INTEGRATOR_BOOT_ROM_HI /* Normal position */ |
| #define INTEGRATOR_BOOT_ROM_SIZE SZ_512K |
| |
| /* |
| * New Core Modules have different amounts of SSRAM, the amount of SSRAM |
| * fitted can be found in HDR_STAT. |
| * |
| * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to |
| * the minimum amount of SSRAM fitted on any core module. |
| * |
| * New Core Modules also alias the SSRAM. |
| * |
| */ |
| #define INTEGRATOR_SSRAM_BASE 0x00000000 |
| #define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 |
| #define INTEGRATOR_SSRAM_SIZE SZ_256K |
| |
| #define INTEGRATOR_FLASH_BASE 0x24000000 |
| #define INTEGRATOR_FLASH_SIZE SZ_32M |
| |
| #define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 |
| #define INTEGRATOR_MBRD_SSRAM_SIZE SZ_512K |
| |
| /* |
| * SDRAM is a SIMM therefore the size is not known. |
| * |
| */ |
| #define INTEGRATOR_SDRAM_BASE 0x00040000 |
| |
| #define INTEGRATOR_SDRAM_ALIAS_BASE 0x80000000 |
| #define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 |
| #define INTEGRATOR_HDR1_SDRAM_BASE 0x90000000 |
| #define INTEGRATOR_HDR2_SDRAM_BASE 0xA0000000 |
| #define INTEGRATOR_HDR3_SDRAM_BASE 0xB0000000 |
| |
| /* |
| * Logic expansion modules |
| * |
| */ |
| #define INTEGRATOR_LOGIC_MODULES_BASE 0xC0000000 |
| #define INTEGRATOR_LOGIC_MODULE0_BASE 0xC0000000 |
| #define INTEGRATOR_LOGIC_MODULE1_BASE 0xD0000000 |
| #define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000 |
| #define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000 |
| |
| /* ------------------------------------------------------------------------ |
| * Integrator header card registers |
| * ------------------------------------------------------------------------ |
| * |
| */ |
| #define INTEGRATOR_HDR_ID_OFFSET 0x00 |
| #define INTEGRATOR_HDR_PROC_OFFSET 0x04 |
| #define INTEGRATOR_HDR_OSC_OFFSET 0x08 |
| #define INTEGRATOR_HDR_CTRL_OFFSET 0x0C |
| #define INTEGRATOR_HDR_STAT_OFFSET 0x10 |
| #define INTEGRATOR_HDR_LOCK_OFFSET 0x14 |
| #define INTEGRATOR_HDR_SDRAM_OFFSET 0x20 |
| #define INTEGRATOR_HDR_INIT_OFFSET 0x24 /* CM9x6 */ |
| #define INTEGRATOR_HDR_IC_OFFSET 0x40 |
| #define INTEGRATOR_HDR_SPDBASE_OFFSET 0x100 |
| #define INTEGRATOR_HDR_SPDTOP_OFFSET 0x200 |
| |
| #define INTEGRATOR_HDR_BASE 0x10000000 |
| #define INTEGRATOR_HDR_ID (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET) |
| #define INTEGRATOR_HDR_PROC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET) |
| #define INTEGRATOR_HDR_OSC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET) |
| #define INTEGRATOR_HDR_CTRL (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET) |
| #define INTEGRATOR_HDR_STAT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET) |
| #define INTEGRATOR_HDR_LOCK (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET) |
| #define INTEGRATOR_HDR_SDRAM (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET) |
| #define INTEGRATOR_HDR_INIT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET) |
| #define INTEGRATOR_HDR_IC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET) |
| #define INTEGRATOR_HDR_SPDBASE (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET) |
| #define INTEGRATOR_HDR_SPDTOP (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET) |
| |
| #define INTEGRATOR_HDR_CTRL_LED 0x01 |
| #define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02 |
| #define INTEGRATOR_HDR_CTRL_REMAP 0x04 |
| #define INTEGRATOR_HDR_CTRL_RESET 0x08 |
| #define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10 |
| #define INTEGRATOR_HDR_CTRL_BIG_ENDIAN 0x20 |
| #define INTEGRATOR_HDR_CTRL_FASTBUS 0x40 |
| #define INTEGRATOR_HDR_CTRL_SYNC 0x80 |
| |
| #define INTEGRATOR_HDR_OSC_CORE_10MHz 0x102 |
| #define INTEGRATOR_HDR_OSC_CORE_15MHz 0x107 |
| #define INTEGRATOR_HDR_OSC_CORE_20MHz 0x10C |
| #define INTEGRATOR_HDR_OSC_CORE_25MHz 0x111 |
| #define INTEGRATOR_HDR_OSC_CORE_30MHz 0x116 |
| #define INTEGRATOR_HDR_OSC_CORE_35MHz 0x11B |
| #define INTEGRATOR_HDR_OSC_CORE_40MHz 0x120 |
| #define INTEGRATOR_HDR_OSC_CORE_45MHz 0x125 |
| #define INTEGRATOR_HDR_OSC_CORE_50MHz 0x12A |
| #define INTEGRATOR_HDR_OSC_CORE_55MHz 0x12F |
| #define INTEGRATOR_HDR_OSC_CORE_60MHz 0x134 |
| #define INTEGRATOR_HDR_OSC_CORE_65MHz 0x139 |
| #define INTEGRATOR_HDR_OSC_CORE_70MHz 0x13E |
| #define INTEGRATOR_HDR_OSC_CORE_75MHz 0x143 |
| #define INTEGRATOR_HDR_OSC_CORE_80MHz 0x148 |
| #define INTEGRATOR_HDR_OSC_CORE_85MHz 0x14D |
| #define INTEGRATOR_HDR_OSC_CORE_90MHz 0x152 |
| #define INTEGRATOR_HDR_OSC_CORE_95MHz 0x157 |
| #define INTEGRATOR_HDR_OSC_CORE_100MHz 0x15C |
| #define INTEGRATOR_HDR_OSC_CORE_105MHz 0x161 |
| #define INTEGRATOR_HDR_OSC_CORE_110MHz 0x166 |
| #define INTEGRATOR_HDR_OSC_CORE_115MHz 0x16B |
| #define INTEGRATOR_HDR_OSC_CORE_120MHz 0x170 |
| #define INTEGRATOR_HDR_OSC_CORE_125MHz 0x175 |
| #define INTEGRATOR_HDR_OSC_CORE_130MHz 0x17A |
| #define INTEGRATOR_HDR_OSC_CORE_135MHz 0x17F |
| #define INTEGRATOR_HDR_OSC_CORE_140MHz 0x184 |
| #define INTEGRATOR_HDR_OSC_CORE_145MHz 0x189 |
| #define INTEGRATOR_HDR_OSC_CORE_150MHz 0x18E |
| #define INTEGRATOR_HDR_OSC_CORE_155MHz 0x193 |
| #define INTEGRATOR_HDR_OSC_CORE_160MHz 0x198 |
| #define INTEGRATOR_HDR_OSC_CORE_MASK 0x7FF |
| |
| #define INTEGRATOR_HDR_OSC_MEM_10MHz 0x10C000 |
| #define INTEGRATOR_HDR_OSC_MEM_15MHz 0x116000 |
| #define INTEGRATOR_HDR_OSC_MEM_20MHz 0x120000 |
| #define INTEGRATOR_HDR_OSC_MEM_25MHz 0x12A000 |
| #define INTEGRATOR_HDR_OSC_MEM_30MHz 0x134000 |
| #define INTEGRATOR_HDR_OSC_MEM_33MHz 0x13A000 |
| #define INTEGRATOR_HDR_OSC_MEM_40MHz 0x148000 |
| #define INTEGRATOR_HDR_OSC_MEM_50MHz 0x15C000 |
| #define INTEGRATOR_HDR_OSC_MEM_60MHz 0x170000 |
| #define INTEGRATOR_HDR_OSC_MEM_66MHz 0x17C000 |
| #define INTEGRATOR_HDR_OSC_MEM_MASK 0x7FF000 |
| |
| #define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0 0x0 |
| #define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0 0x0800000 |
| #define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6 0x1000000 |
| #define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00 0x1800000 |
| #define INTEGRATOR_HDR_OSC_BUS_MODE_MASK 0x1800000 |
| |
| #define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5) |
| |
| |
| /* ------------------------------------------------------------------------ |
| * Integrator system registers |
| * ------------------------------------------------------------------------ |
| * |
| */ |
| |
| /* |
| * System Controller |
| * |
| */ |
| #define INTEGRATOR_SC_ID_OFFSET 0x00 |
| #define INTEGRATOR_SC_OSC_OFFSET 0x04 |
| #define INTEGRATOR_SC_CTRLS_OFFSET 0x08 |
| #define INTEGRATOR_SC_CTRLC_OFFSET 0x0C |
| #define INTEGRATOR_SC_DEC_OFFSET 0x10 |
| #define INTEGRATOR_SC_ARB_OFFSET 0x14 |
| #define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 |
| #define INTEGRATOR_SC_LOCK_OFFSET 0x1C |
| |
| #define INTEGRATOR_SC_BASE 0x11000000 |
| #define INTEGRATOR_SC_ID (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET) |
| #define INTEGRATOR_SC_OSC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET) |
| #define INTEGRATOR_SC_CTRLS (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) |
| #define INTEGRATOR_SC_CTRLC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) |
| #define INTEGRATOR_SC_DEC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET) |
| #define INTEGRATOR_SC_ARB (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET) |
| #define INTEGRATOR_SC_PCIENABLE (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET) |
| #define INTEGRATOR_SC_LOCK (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET) |
| |
| #define INTEGRATOR_SC_OSC_SYS_10MHz 0x20 |
| #define INTEGRATOR_SC_OSC_SYS_15MHz 0x34 |
| #define INTEGRATOR_SC_OSC_SYS_20MHz 0x48 |
| #define INTEGRATOR_SC_OSC_SYS_25MHz 0x5C |
| #define INTEGRATOR_SC_OSC_SYS_33MHz 0x7C |
| #define INTEGRATOR_SC_OSC_SYS_MASK 0xFF |
| |
| #define INTEGRATOR_SC_OSC_PCI_25MHz 0x100 |
| #define INTEGRATOR_SC_OSC_PCI_33MHz 0x0 |
| #define INTEGRATOR_SC_OSC_PCI_MASK 0x100 |
| |
| #define INTEGRATOR_SC_CTRL_SOFTRST (1 << 0) |
| #define INTEGRATOR_SC_CTRL_nFLVPPEN (1 << 1) |
| #define INTEGRATOR_SC_CTRL_nFLWP (1 << 2) |
| #define INTEGRATOR_SC_CTRL_URTS0 (1 << 4) |
| #define INTEGRATOR_SC_CTRL_UDTR0 (1 << 5) |
| #define INTEGRATOR_SC_CTRL_URTS1 (1 << 6) |
| #define INTEGRATOR_SC_CTRL_UDTR1 (1 << 7) |
| |
| /* |
| * External Bus Interface |
| * |
| */ |
| #define INTEGRATOR_EBI_BASE 0x12000000 |
| |
| #define INTEGRATOR_EBI_CSR0_OFFSET 0x00 |
| #define INTEGRATOR_EBI_CSR1_OFFSET 0x04 |
| #define INTEGRATOR_EBI_CSR2_OFFSET 0x08 |
| #define INTEGRATOR_EBI_CSR3_OFFSET 0x0C |
| #define INTEGRATOR_EBI_LOCK_OFFSET 0x20 |
| |
| #define INTEGRATOR_EBI_CSR0 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET) |
| #define INTEGRATOR_EBI_CSR1 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) |
| #define INTEGRATOR_EBI_CSR2 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET) |
| #define INTEGRATOR_EBI_CSR3 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET) |
| #define INTEGRATOR_EBI_LOCK (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) |
| |
| #define INTEGRATOR_EBI_8_BIT 0x00 |
| #define INTEGRATOR_EBI_16_BIT 0x01 |
| #define INTEGRATOR_EBI_32_BIT 0x02 |
| #define INTEGRATOR_EBI_WRITE_ENABLE 0x04 |
| #define INTEGRATOR_EBI_SYNC 0x08 |
| #define INTEGRATOR_EBI_WS_2 0x00 |
| #define INTEGRATOR_EBI_WS_3 0x10 |
| #define INTEGRATOR_EBI_WS_4 0x20 |
| #define INTEGRATOR_EBI_WS_5 0x30 |
| #define INTEGRATOR_EBI_WS_6 0x40 |
| #define INTEGRATOR_EBI_WS_7 0x50 |
| #define INTEGRATOR_EBI_WS_8 0x60 |
| #define INTEGRATOR_EBI_WS_9 0x70 |
| #define INTEGRATOR_EBI_WS_10 0x80 |
| #define INTEGRATOR_EBI_WS_11 0x90 |
| #define INTEGRATOR_EBI_WS_12 0xA0 |
| #define INTEGRATOR_EBI_WS_13 0xB0 |
| #define INTEGRATOR_EBI_WS_14 0xC0 |
| #define INTEGRATOR_EBI_WS_15 0xD0 |
| #define INTEGRATOR_EBI_WS_16 0xE0 |
| #define INTEGRATOR_EBI_WS_17 0xF0 |
| |
| |
| #define INTEGRATOR_CT_BASE 0x13000000 /* Counter/Timers */ |
| #define INTEGRATOR_IC_BASE 0x14000000 /* Interrupt Controller */ |
| #define INTEGRATOR_RTC_BASE 0x15000000 /* Real Time Clock */ |
| #define INTEGRATOR_UART0_BASE 0x16000000 /* UART 0 */ |
| #define INTEGRATOR_UART1_BASE 0x17000000 /* UART 1 */ |
| #define INTEGRATOR_KBD_BASE 0x18000000 /* Keyboard */ |
| #define INTEGRATOR_MOUSE_BASE 0x19000000 /* Mouse */ |
| |
| /* |
| * LED's & Switches |
| * |
| */ |
| #define INTEGRATOR_DBG_ALPHA_OFFSET 0x00 |
| #define INTEGRATOR_DBG_LEDS_OFFSET 0x04 |
| #define INTEGRATOR_DBG_SWITCH_OFFSET 0x08 |
| |
| #define INTEGRATOR_DBG_BASE 0x1A000000 |
| #define INTEGRATOR_DBG_ALPHA (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET) |
| #define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) |
| #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) |
| |
| |
| #if defined(CONFIG_ARCH_INTEGRATOR_AP) |
| #define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ |
| #elif defined(CONFIG_ARCH_INTEGRATOR_CP) |
| #define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ |
| #endif |
| |
| /* ------------------------------------------------------------------------ |
| * KMI keyboard/mouse definitions |
| * ------------------------------------------------------------------------ |
| */ |
| /* PS2 Keyboard interface */ |
| #define KMI0_BASE INTEGRATOR_KBD_BASE |
| |
| /* PS2 Mouse interface */ |
| #define KMI1_BASE INTEGRATOR_MOUSE_BASE |
| |
| /* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ |
| |
| /* ------------------------------------------------------------------------ |
| * Where in the memory map does PCI live? |
| * ------------------------------------------------------------------------ |
| * This represents a fairly liberal usage of address space. Even though |
| * the V3 only has two windows (therefore we need to map stuff on the fly), |
| * we maintain the same addresses, even if they're not mapped. |
| * |
| */ |
| #define PHYS_PCI_MEM_BASE 0x40000000 /* 512M to xxx */ |
| /* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? |
| */ |
| #define PHYS_PCI_IO_BASE 0x60000000 /* 16M to xxx */ |
| /* unused (128-16)M from B1000000-B7FFFFFF |
| */ |
| #define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ |
| /* unused ((128-16)M - 64K) from XXX |
| */ |
| #define PHYS_PCI_V3_BASE 0x62000000 |
| |
| #define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE |
| |
| /* 'export' these to UHAL */ |
| #define UHAL_PCI_IO PCI_IO_BASE |
| #define UHAL_PCI_MEM PCI_MEM_BASE |
| #define UHAL_PCI_ALLOC_IO_BASE 0x00004000 |
| #define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE |
| #define UHAL_PCI_MAX_SLOT 20 |
| |
| /* ======================================================================== |
| * Start of uHAL definitions |
| * ======================================================================== |
| */ |
| |
| /* ------------------------------------------------------------------------ |
| * Integrator Interrupt Controllers |
| * ------------------------------------------------------------------------ |
| * |
| * Offsets from interrupt controller base |
| * |
| * System Controller interrupt controller base is |
| * |
| * INTEGRATOR_IC_BASE + (header_number << 6) |
| * |
| * Core Module interrupt controller base is |
| * |
| * INTEGRATOR_HDR_IC |
| * |
| */ |
| #define IRQ_STATUS 0 |
| #define IRQ_RAW_STATUS 0x04 |
| #define IRQ_ENABLE 0x08 |
| #define IRQ_ENABLE_SET 0x08 |
| #define IRQ_ENABLE_CLEAR 0x0C |
| |
| #define INT_SOFT_SET 0x10 |
| #define INT_SOFT_CLEAR 0x14 |
| |
| #define FIQ_STATUS 0x20 |
| #define FIQ_RAW_STATUS 0x24 |
| #define FIQ_ENABLE 0x28 |
| #define FIQ_ENABLE_SET 0x28 |
| #define FIQ_ENABLE_CLEAR 0x2C |
| |
| |
| /* ------------------------------------------------------------------------ |
| * Interrupts |
| * ------------------------------------------------------------------------ |
| * |
| * |
| * Each Core Module has two interrupts controllers, one on the core module |
| * itself and one in the system controller on the motherboard. The |
| * READ_INT macro in target.s reads both interrupt controllers and returns |
| * a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller |
| * and bits 24 to 31 are from the core module. |
| * |
| * The following definitions relate to the bitmask returned by READ_INT. |
| * |
| */ |
| |
| /* ------------------------------------------------------------------------ |
| * LED's - The header LED is not accessible via the uHAL API |
| * ------------------------------------------------------------------------ |
| * |
| */ |
| #define GREEN_LED 0x01 |
| #define YELLOW_LED 0x02 |
| #define RED_LED 0x04 |
| #define GREEN_LED_2 0x08 |
| #define ALL_LEDS 0x0F |
| |
| #define LED_BANK INTEGRATOR_DBG_LEDS |
| |
| /* |
| * Memory definitions - run uHAL out of SSRAM. |
| * |
| */ |
| #define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE |
| |
| /* |
| * Clean base - dummy |
| * |
| */ |
| #define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI |
| |
| /* |
| * Timer definitions |
| * |
| * Only use timer 1 & 2 |
| * (both run at 24MHz and will need the clock divider set to 16). |
| * |
| * Timer 0 runs at bus frequency and therefore could vary and currently |
| * uHAL can't handle that. |
| * |
| */ |
| |
| #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE |
| #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) |
| #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) |
| |
| #define MAX_TIMER 2 |
| #define MAX_PERIOD 699050 |
| #define TICKS_PER_uSEC 24 |
| |
| /* |
| * These are useconds NOT ticks. |
| * |
| */ |
| #define mSEC_1 1000 |
| #define mSEC_5 (mSEC_1 * 5) |
| #define mSEC_10 (mSEC_1 * 10) |
| #define mSEC_25 (mSEC_1 * 25) |
| #define SEC_1 (mSEC_1 * 1000) |
| |
| #define INTEGRATOR_CSR_BASE 0x10000000 |
| #define INTEGRATOR_CSR_SIZE 0x10000000 |
| |
| #endif |
| |
| /* END */ |
