drivers/rtc/rtc-pcf8563.c - maze/linux - Git at Google

 /*
  * An I2C driver for the Philips PCF8563 RTC
  * Copyright 2005-06 Tower Technologies
  *
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  * Maintainers: http://www.nslu2-linux.org/
  *
  * based on the other drivers in this same directory.
  *
  * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/i2c.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>

 #define DRV_VERSION "0.4.2"

 /* Addresses to scan: none
  * This chip cannot be reliably autodetected. An empty eeprom
  * located at 0x51 will pass the validation routine due to
  * the way the registers are implemented.
  */
 static unsigned short normal_i2c[] = { I2C_CLIENT_END };

 /* Module parameters */
 I2C_CLIENT_INSMOD;

 #define PCF8563_REG_ST1		0x00 /* status */
 #define PCF8563_REG_ST2		0x01

 #define PCF8563_REG_SC		0x02 /* datetime */
 #define PCF8563_REG_MN		0x03
 #define PCF8563_REG_HR		0x04
 #define PCF8563_REG_DM		0x05
 #define PCF8563_REG_DW		0x06
 #define PCF8563_REG_MO		0x07
 #define PCF8563_REG_YR		0x08

 #define PCF8563_REG_AMN		0x09 /* alarm */
 #define PCF8563_REG_AHR		0x0A
 #define PCF8563_REG_ADM		0x0B
 #define PCF8563_REG_ADW		0x0C

 #define PCF8563_REG_CLKO	0x0D /* clock out */
 #define PCF8563_REG_TMRC	0x0E /* timer control */
 #define PCF8563_REG_TMR		0x0F /* timer */

 #define PCF8563_SC_LV		0x80 /* low voltage */
 #define PCF8563_MO_C		0x80 /* century */

 static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
 static int pcf8563_detach(struct i2c_client *client);

 /*
  * In the routines that deal directly with the pcf8563 hardware, we use
  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
  */
 static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
 	unsigned char buf[13] = { PCF8563_REG_ST1 };

 	struct i2c_msg msgs[] = {
 		{ client->addr, 0, 1, buf },	/* setup read ptr */
 		{ client->addr, I2C_M_RD, 13, buf },	/* read status + date */
 	};

 	/* read registers */
 	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
 		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
 		return -EIO;
 	}

 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
 		dev_info(&client->dev,
 			"low voltage detected, date/time is not reliable.\n");

 	dev_dbg(&client->dev,
 		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
 		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
 		__FUNCTION__,
 		buf[0], buf[1], buf[2], buf[3],
 		buf[4], buf[5], buf[6], buf[7],
 		buf[8]);


 	tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F);
 	tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F);
 	tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
 	tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F);
 	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
 	tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
 	tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR])
 		+ (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0);

 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__FUNCTION__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

 	/* the clock can give out invalid datetime, but we cannot return
 	 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
 	 */
 	if (rtc_valid_tm(tm) < 0)
 		dev_err(&client->dev, "retrieved date/time is not valid.\n");

 	return 0;
 }

 static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
 	int i, err;
 	unsigned char buf[9];

 	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__FUNCTION__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

 	/* hours, minutes and seconds */
 	buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec);
 	buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min);
 	buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour);

 	buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday);

 	/* month, 1 - 12 */
 	buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1);

 	/* year and century */
 	buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100);
 	if (tm->tm_year / 100)
 		buf[PCF8563_REG_MO] |= PCF8563_MO_C;

 	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;

 	/* write register's data */
 	for (i = 0; i < 7; i++) {
 		unsigned char data[2] = { PCF8563_REG_SC + i,
 						buf[PCF8563_REG_SC + i] };

 		err = i2c_master_send(client, data, sizeof(data));
 		if (err != sizeof(data)) {
 			dev_err(&client->dev,
 				"%s: err=%d addr=%02x, data=%02x\n",
 				__FUNCTION__, err, data[0], data[1]);
 			return -EIO;
 		}
 	};

 	return 0;
 }

 struct pcf8563_limit
 {
 	unsigned char reg;
 	unsigned char mask;
 	unsigned char min;
 	unsigned char max;
 };

 static int pcf8563_validate_client(struct i2c_client *client)
 {
 	int i;

 	static const struct pcf8563_limit pattern[] = {
 		/* register, mask, min, max */
 		{ PCF8563_REG_SC,	0x7F,	0,	59	},
 		{ PCF8563_REG_MN,	0x7F,	0,	59	},
 		{ PCF8563_REG_HR,	0x3F,	0,	23	},
 		{ PCF8563_REG_DM,	0x3F,	0,	31	},
 		{ PCF8563_REG_MO,	0x1F,	0,	12	},
 	};

 	/* check limits (only registers with bcd values) */
 	for (i = 0; i < ARRAY_SIZE(pattern); i++) {
 		int xfer;
 		unsigned char value;
 		unsigned char buf = pattern[i].reg;

 		struct i2c_msg msgs[] = {
 			{ client->addr, 0, 1, &buf },
 			{ client->addr, I2C_M_RD, 1, &buf },
 		};

 		xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));

 		if (xfer != ARRAY_SIZE(msgs)) {
 			dev_err(&client->adapter->dev,
 				"%s: could not read register 0x%02X\n",
 				__FUNCTION__, pattern[i].reg);

 			return -EIO;
 		}

 		value = BCD2BIN(buf & pattern[i].mask);

 		if (value > pattern[i].max ||
 			value < pattern[i].min) {
 			dev_dbg(&client->adapter->dev,
 				"%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
 				"max=%d, value=%d, raw=0x%02X\n",
 				__FUNCTION__, i, pattern[i].reg, pattern[i].mask,
 				pattern[i].min, pattern[i].max,
 				value, buf);

 			return -ENODEV;
 		}
 	}

 	return 0;
 }

 static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	return pcf8563_get_datetime(to_i2c_client(dev), tm);
 }

 static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	return pcf8563_set_datetime(to_i2c_client(dev), tm);
 }

 static int pcf8563_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	seq_printf(seq, "24hr\t\t: yes\n");
 	return 0;
 }

 static struct rtc_class_ops pcf8563_rtc_ops = {
 	.proc		= pcf8563_rtc_proc,
 	.read_time	= pcf8563_rtc_read_time,
 	.set_time	= pcf8563_rtc_set_time,
 };

 static int pcf8563_attach(struct i2c_adapter *adapter)
 {
 	return i2c_probe(adapter, &addr_data, pcf8563_probe);
 }

 static struct i2c_driver pcf8563_driver = {
 	.driver		= {
 		.name	= "pcf8563",
 	},
 	.id		= I2C_DRIVERID_PCF8563,
 	.attach_adapter = &pcf8563_attach,
 	.detach_client	= &pcf8563_detach,
 };

 static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
 {
 	struct i2c_client *client;
 	struct rtc_device *rtc;

 	int err = 0;

 	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);

 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
 		err = -ENODEV;
 		goto exit;
 	}

 	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}

 	client->addr = address;
 	client->driver = &pcf8563_driver;
 	client->adapter	= adapter;

 	strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);

 	/* Verify the chip is really an PCF8563 */
 	if (kind < 0) {
 		if (pcf8563_validate_client(client) < 0) {
 			err = -ENODEV;
 			goto exit_kfree;
 		}
 	}

 	/* Inform the i2c layer */
 	if ((err = i2c_attach_client(client)))
 		goto exit_kfree;

 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");

 	rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
 				&pcf8563_rtc_ops, THIS_MODULE);

 	if (IS_ERR(rtc)) {
 		err = PTR_ERR(rtc);
 		dev_err(&client->dev,
 			"unable to register the class device\n");
 		goto exit_detach;
 	}

 	i2c_set_clientdata(client, rtc);

 	return 0;

 exit_detach:
 	i2c_detach_client(client);

 exit_kfree:
 	kfree(client);

 exit:
 	return err;
 }

 static int pcf8563_detach(struct i2c_client *client)
 {
 	int err;
 	struct rtc_device *rtc = i2c_get_clientdata(client);

 	dev_dbg(&client->dev, "%s\n", __FUNCTION__);

 	if (rtc)
 		rtc_device_unregister(rtc);

 	if ((err = i2c_detach_client(client)))
 		return err;

 	kfree(client);

 	return 0;
 }

 static int __init pcf8563_init(void)
 {
 	return i2c_add_driver(&pcf8563_driver);
 }

 static void __exit pcf8563_exit(void)
 {
 	i2c_del_driver(&pcf8563_driver);
 }

 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);

 module_init(pcf8563_init);
 module_exit(pcf8563_exit);
	/*
	* An I2C driver for the Philips PCF8563 RTC
	* Copyright 2005-06 Tower Technologies
	*
	* Author: Alessandro Zummo <a.zummo@towertech.it>
	* Maintainers: http://www.nslu2-linux.org/
	*
	* based on the other drivers in this same directory.
	*
	* http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/i2c.h>
	#include <linux/bcd.h>
	#include <linux/rtc.h>

	#define DRV_VERSION "0.4.2"

	/* Addresses to scan: none
	* This chip cannot be reliably autodetected. An empty eeprom
	* located at 0x51 will pass the validation routine due to
	* the way the registers are implemented.
	*/
	static unsigned short normal_i2c[] = { I2C_CLIENT_END };

	/* Module parameters */
	I2C_CLIENT_INSMOD;

	#define PCF8563_REG_ST1 0x00 /* status */
	#define PCF8563_REG_ST2 0x01

	#define PCF8563_REG_SC 0x02 /* datetime */
	#define PCF8563_REG_MN 0x03
	#define PCF8563_REG_HR 0x04
	#define PCF8563_REG_DM 0x05
	#define PCF8563_REG_DW 0x06
	#define PCF8563_REG_MO 0x07
	#define PCF8563_REG_YR 0x08

	#define PCF8563_REG_AMN 0x09 /* alarm */
	#define PCF8563_REG_AHR 0x0A
	#define PCF8563_REG_ADM 0x0B
	#define PCF8563_REG_ADW 0x0C

	#define PCF8563_REG_CLKO 0x0D /* clock out */
	#define PCF8563_REG_TMRC 0x0E /* timer control */
	#define PCF8563_REG_TMR 0x0F /* timer */

	#define PCF8563_SC_LV 0x80 /* low voltage */
	#define PCF8563_MO_C 0x80 /* century */

	static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
	static int pcf8563_detach(struct i2c_client *client);

	/*
	* In the routines that deal directly with the pcf8563 hardware, we use
	* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
	*/
	static int pcf8563_get_datetime(struct i2c_client client, struct rtc_time tm)
	{
	unsigned char buf[13] = { PCF8563_REG_ST1 };

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 1, buf }, /* setup read ptr */
	{ client->addr, I2C_M_RD, 13, buf }, /* read status + date */
	};

	/* read registers */
	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
	dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
	return -EIO;
	}

	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
	dev_info(&client->dev,
	"low voltage detected, date/time is not reliable.\n");

	dev_dbg(&client->dev,
	"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
	"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
	__FUNCTION__,
	buf[0], buf[1], buf[2], buf[3],
	buf[4], buf[5], buf[6], buf[7],
	buf[8]);


	tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F);
	tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F);
	tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
	tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F);
	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
	tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
	tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR])
	+ (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0);

	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
	"mday=%d, mon=%d, year=%d, wday=%d\n",
	__FUNCTION__,
	tm->tm_sec, tm->tm_min, tm->tm_hour,
	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	/* the clock can give out invalid datetime, but we cannot return
	* -EINVAL otherwise hwclock will refuse to set the time on bootup.
	*/
	if (rtc_valid_tm(tm) < 0)
	dev_err(&client->dev, "retrieved date/time is not valid.\n");

	return 0;
	}

	static int pcf8563_set_datetime(struct i2c_client client, struct rtc_time tm)
	{
	int i, err;
	unsigned char buf[9];

	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
	"mday=%d, mon=%d, year=%d, wday=%d\n",
	__FUNCTION__,
	tm->tm_sec, tm->tm_min, tm->tm_hour,
	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	/* hours, minutes and seconds */
	buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec);
	buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min);
	buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour);

	buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday);

	/* month, 1 - 12 */
	buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1);

	/* year and century */
	buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100);
	if (tm->tm_year / 100)
	buf[PCF8563_REG_MO] \|= PCF8563_MO_C;

	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;

	/* write register's data */
	for (i = 0; i < 7; i++) {
	unsigned char data[2] = { PCF8563_REG_SC + i,
	buf[PCF8563_REG_SC + i] };

	err = i2c_master_send(client, data, sizeof(data));
	if (err != sizeof(data)) {
	dev_err(&client->dev,
	"%s: err=%d addr=%02x, data=%02x\n",
	__FUNCTION__, err, data[0], data[1]);
	return -EIO;
	}
	};

	return 0;
	}

	struct pcf8563_limit
	{
	unsigned char reg;
	unsigned char mask;
	unsigned char min;
	unsigned char max;
	};

	static int pcf8563_validate_client(struct i2c_client *client)
	{
	int i;

	static const struct pcf8563_limit pattern[] = {
	/* register, mask, min, max */
	{ PCF8563_REG_SC, 0x7F, 0, 59 },
	{ PCF8563_REG_MN, 0x7F, 0, 59 },
	{ PCF8563_REG_HR, 0x3F, 0, 23 },
	{ PCF8563_REG_DM, 0x3F, 0, 31 },
	{ PCF8563_REG_MO, 0x1F, 0, 12 },
	};

	/* check limits (only registers with bcd values) */
	for (i = 0; i < ARRAY_SIZE(pattern); i++) {
	int xfer;
	unsigned char value;
	unsigned char buf = pattern[i].reg;

	struct i2c_msg msgs[] = {
	{ client->addr, 0, 1, &buf },
	{ client->addr, I2C_M_RD, 1, &buf },
	};

	xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));

	if (xfer != ARRAY_SIZE(msgs)) {
	dev_err(&client->adapter->dev,
	"%s: could not read register 0x%02X\n",
	__FUNCTION__, pattern[i].reg);

	return -EIO;
	}

	value = BCD2BIN(buf & pattern[i].mask);

	if (value > pattern[i].max \|\|
	value < pattern[i].min) {
	dev_dbg(&client->adapter->dev,
	"%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
	"max=%d, value=%d, raw=0x%02X\n",
	__FUNCTION__, i, pattern[i].reg, pattern[i].mask,
	pattern[i].min, pattern[i].max,
	value, buf);

	return -ENODEV;
	}
	}

	return 0;
	}

	static int pcf8563_rtc_read_time(struct device dev, struct rtc_time tm)
	{
	return pcf8563_get_datetime(to_i2c_client(dev), tm);
	}

	static int pcf8563_rtc_set_time(struct device dev, struct rtc_time tm)
	{
	return pcf8563_set_datetime(to_i2c_client(dev), tm);
	}

	static int pcf8563_rtc_proc(struct device dev, struct seq_file seq)
	{
	seq_printf(seq, "24hr\t\t: yes\n");
	return 0;
	}

	static struct rtc_class_ops pcf8563_rtc_ops = {
	.proc = pcf8563_rtc_proc,
	.read_time = pcf8563_rtc_read_time,
	.set_time = pcf8563_rtc_set_time,
	};

	static int pcf8563_attach(struct i2c_adapter *adapter)
	{
	return i2c_probe(adapter, &addr_data, pcf8563_probe);
	}

	static struct i2c_driver pcf8563_driver = {
	.driver = {
	.name = "pcf8563",
	},
	.id = I2C_DRIVERID_PCF8563,
	.attach_adapter = &pcf8563_attach,
	.detach_client = &pcf8563_detach,
	};

	static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
	{
	struct i2c_client *client;
	struct rtc_device *rtc;

	int err = 0;

	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);

	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
	err = -ENODEV;
	goto exit;
	}

	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
	err = -ENOMEM;
	goto exit;
	}

	client->addr = address;
	client->driver = &pcf8563_driver;
	client->adapter = adapter;

	strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);

	/* Verify the chip is really an PCF8563 */
	if (kind < 0) {
	if (pcf8563_validate_client(client) < 0) {
	err = -ENODEV;
	goto exit_kfree;
	}
	}

	/* Inform the i2c layer */
	if ((err = i2c_attach_client(client)))
	goto exit_kfree;

	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");

	rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
	&pcf8563_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc)) {
	err = PTR_ERR(rtc);
	dev_err(&client->dev,
	"unable to register the class device\n");
	goto exit_detach;
	}

	i2c_set_clientdata(client, rtc);

	return 0;

	exit_detach:
	i2c_detach_client(client);

	exit_kfree:
	kfree(client);

	exit:
	return err;
	}

	static int pcf8563_detach(struct i2c_client *client)
	{
	int err;
	struct rtc_device *rtc = i2c_get_clientdata(client);

	dev_dbg(&client->dev, "%s\n", __FUNCTION__);

	if (rtc)
	rtc_device_unregister(rtc);

	if ((err = i2c_detach_client(client)))
	return err;

	kfree(client);

	return 0;
	}

	static int __init pcf8563_init(void)
	{
	return i2c_add_driver(&pcf8563_driver);
	}

	static void __exit pcf8563_exit(void)
	{
	i2c_del_driver(&pcf8563_driver);
	}

	MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
	MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
	MODULE_LICENSE("GPL");
	MODULE_VERSION(DRV_VERSION);

	module_init(pcf8563_init);
	module_exit(pcf8563_exit);