| /* |
| * Alpha specific irq code. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/irq.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/module.h> |
| |
| #include <asm/machvec.h> |
| #include <asm/dma.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| |
| /* Hack minimum IPL during interrupt processing for broken hardware. */ |
| #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK |
| int __min_ipl; |
| EXPORT_SYMBOL(__min_ipl); |
| #endif |
| |
| /* |
| * Performance counter hook. A module can override this to |
| * do something useful. |
| */ |
| static void |
| dummy_perf(unsigned long vector, struct pt_regs *regs) |
| { |
| irq_err_count++; |
| printk(KERN_CRIT "Performance counter interrupt!\n"); |
| } |
| |
| void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf; |
| EXPORT_SYMBOL(perf_irq); |
| |
| /* |
| * The main interrupt entry point. |
| */ |
| |
| asmlinkage void |
| do_entInt(unsigned long type, unsigned long vector, |
| unsigned long la_ptr, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs; |
| switch (type) { |
| case 0: |
| #ifdef CONFIG_SMP |
| handle_ipi(regs); |
| return; |
| #else |
| irq_err_count++; |
| printk(KERN_CRIT "Interprocessor interrupt? " |
| "You must be kidding!\n"); |
| #endif |
| break; |
| case 1: |
| old_regs = set_irq_regs(regs); |
| #ifdef CONFIG_SMP |
| { |
| long cpu; |
| |
| local_irq_disable(); |
| smp_percpu_timer_interrupt(regs); |
| cpu = smp_processor_id(); |
| if (cpu != boot_cpuid) { |
| kstat_cpu(cpu).irqs[RTC_IRQ]++; |
| } else { |
| handle_irq(RTC_IRQ); |
| } |
| } |
| #else |
| handle_irq(RTC_IRQ); |
| #endif |
| set_irq_regs(old_regs); |
| return; |
| case 2: |
| old_regs = set_irq_regs(regs); |
| alpha_mv.machine_check(vector, la_ptr); |
| set_irq_regs(old_regs); |
| return; |
| case 3: |
| old_regs = set_irq_regs(regs); |
| alpha_mv.device_interrupt(vector); |
| set_irq_regs(old_regs); |
| return; |
| case 4: |
| perf_irq(la_ptr, regs); |
| return; |
| default: |
| printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n", |
| type, vector); |
| } |
| printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps); |
| } |
| |
| void __init |
| common_init_isa_dma(void) |
| { |
| outb(0, DMA1_RESET_REG); |
| outb(0, DMA2_RESET_REG); |
| outb(0, DMA1_CLR_MASK_REG); |
| outb(0, DMA2_CLR_MASK_REG); |
| } |
| |
| void __init |
| init_IRQ(void) |
| { |
| /* Just in case the platform init_irq() causes interrupts/mchecks |
| (as is the case with RAWHIDE, at least). */ |
| wrent(entInt, 0); |
| |
| alpha_mv.init_irq(); |
| } |
| |
| /* |
| * machine error checks |
| */ |
| #define MCHK_K_TPERR 0x0080 |
| #define MCHK_K_TCPERR 0x0082 |
| #define MCHK_K_HERR 0x0084 |
| #define MCHK_K_ECC_C 0x0086 |
| #define MCHK_K_ECC_NC 0x0088 |
| #define MCHK_K_OS_BUGCHECK 0x008A |
| #define MCHK_K_PAL_BUGCHECK 0x0090 |
| |
| #ifndef CONFIG_SMP |
| struct mcheck_info __mcheck_info; |
| #endif |
| |
| void |
| process_mcheck_info(unsigned long vector, unsigned long la_ptr, |
| const char *machine, int expected) |
| { |
| struct el_common *mchk_header; |
| const char *reason; |
| |
| /* |
| * See if the machine check is due to a badaddr() and if so, |
| * ignore it. |
| */ |
| |
| #ifdef CONFIG_VERBOSE_MCHECK |
| if (alpha_verbose_mcheck > 1) { |
| printk(KERN_CRIT "%s machine check %s\n", machine, |
| expected ? "expected." : "NOT expected!!!"); |
| } |
| #endif |
| |
| if (expected) { |
| int cpu = smp_processor_id(); |
| mcheck_expected(cpu) = 0; |
| mcheck_taken(cpu) = 1; |
| return; |
| } |
| |
| mchk_header = (struct el_common *)la_ptr; |
| |
| printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n", |
| machine, vector, get_irq_regs()->pc, mchk_header->code); |
| |
| switch (mchk_header->code) { |
| /* Machine check reasons. Defined according to PALcode sources. */ |
| case 0x80: reason = "tag parity error"; break; |
| case 0x82: reason = "tag control parity error"; break; |
| case 0x84: reason = "generic hard error"; break; |
| case 0x86: reason = "correctable ECC error"; break; |
| case 0x88: reason = "uncorrectable ECC error"; break; |
| case 0x8A: reason = "OS-specific PAL bugcheck"; break; |
| case 0x90: reason = "callsys in kernel mode"; break; |
| case 0x96: reason = "i-cache read retryable error"; break; |
| case 0x98: reason = "processor detected hard error"; break; |
| |
| /* System specific (these are for Alcor, at least): */ |
| case 0x202: reason = "system detected hard error"; break; |
| case 0x203: reason = "system detected uncorrectable ECC error"; break; |
| case 0x204: reason = "SIO SERR occurred on PCI bus"; break; |
| case 0x205: reason = "parity error detected by core logic"; break; |
| case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break; |
| case 0x207: reason = "non-existent memory error"; break; |
| case 0x208: reason = "MCHK_K_DCSR"; break; |
| case 0x209: reason = "PCI SERR detected"; break; |
| case 0x20b: reason = "PCI data parity error detected"; break; |
| case 0x20d: reason = "PCI address parity error detected"; break; |
| case 0x20f: reason = "PCI master abort error"; break; |
| case 0x211: reason = "PCI target abort error"; break; |
| case 0x213: reason = "scatter/gather PTE invalid error"; break; |
| case 0x215: reason = "flash ROM write error"; break; |
| case 0x217: reason = "IOA timeout detected"; break; |
| case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break; |
| case 0x21b: reason = "EISA fail-safe timer timeout"; break; |
| case 0x21d: reason = "EISA bus time-out"; break; |
| case 0x21f: reason = "EISA software generated NMI"; break; |
| case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break; |
| default: reason = "unknown"; break; |
| } |
| |
| printk(KERN_CRIT "machine check type: %s%s\n", |
| reason, mchk_header->retry ? " (retryable)" : ""); |
| |
| dik_show_regs(get_irq_regs(), NULL); |
| |
| #ifdef CONFIG_VERBOSE_MCHECK |
| if (alpha_verbose_mcheck > 1) { |
| /* Dump the logout area to give all info. */ |
| unsigned long *ptr = (unsigned long *)la_ptr; |
| long i; |
| for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { |
| printk(KERN_CRIT " +%8lx %016lx %016lx\n", |
| i*sizeof(long), ptr[i], ptr[i+1]); |
| } |
| } |
| #endif /* CONFIG_VERBOSE_MCHECK */ |
| } |
| |
| /* |
| * The special RTC interrupt type. The interrupt itself was |
| * processed by PALcode, and comes in via entInt vector 1. |
| */ |
| |
| static void rtc_enable_disable(unsigned int irq) { } |
| static unsigned int rtc_startup(unsigned int irq) { return 0; } |
| |
| struct irqaction timer_irqaction = { |
| .handler = timer_interrupt, |
| .flags = IRQF_DISABLED, |
| .name = "timer", |
| }; |
| |
| static struct hw_interrupt_type rtc_irq_type = { |
| .typename = "RTC", |
| .startup = rtc_startup, |
| .shutdown = rtc_enable_disable, |
| .enable = rtc_enable_disable, |
| .disable = rtc_enable_disable, |
| .ack = rtc_enable_disable, |
| .end = rtc_enable_disable, |
| }; |
| |
| void __init |
| init_rtc_irq(void) |
| { |
| irq_desc[RTC_IRQ].status = IRQ_DISABLED; |
| irq_desc[RTC_IRQ].chip = &rtc_irq_type; |
| setup_irq(RTC_IRQ, &timer_irqaction); |
| } |
| |
| /* Dummy irqactions. */ |
| struct irqaction isa_cascade_irqaction = { |
| .handler = no_action, |
| .name = "isa-cascade" |
| }; |
| |
| struct irqaction timer_cascade_irqaction = { |
| .handler = no_action, |
| .name = "timer-cascade" |
| }; |
| |
| struct irqaction halt_switch_irqaction = { |
| .handler = no_action, |
| .name = "halt-switch" |
| }; |