| How to set up the Technisat devices |
| =================================== |
| |
| 1) Find out what device you have |
| ================================ |
| |
| First start your linux box with a shipped kernel: |
| lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: |
| 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) |
| |
| dmesg | grep frontend may show you for example: |
| DVB: registering frontend 0 (Conexant CX24123/CX24109)... |
| |
| 2) Kernel compilation: |
| ====================== |
| |
| If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: |
| "Multimedia devices" => "Customise analog and hybrid tuner modules to build" |
| In this directory uncheck every driver which is activated there. |
| |
| Then please activate: |
| 2a) Main module part: |
| |
| a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" |
| b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR |
| c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter |
| d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" |
| Notice: d.) is helpful for troubleshooting |
| |
| 2b) Frontend module part: |
| |
| 1.) Revision 2.3: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" |
| |
| 2.) Revision 2.6: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" |
| |
| 3.) Revision 2.7: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" |
| c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" |
| d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" |
| |
| 4.) Revision 2.8: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" |
| c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" |
| d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" |
| |
| 5.) DVB-T card: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" |
| |
| 6.) DVB-C card: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" |
| |
| 7.) ATSC card 1st generation: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" |
| |
| 8.) ATSC card 2nd generation: |
| a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" |
| b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" |
| c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" |
| |
| Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008 |
