| /* |
| * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * Author: Fabio Estevam <fabio.estevam@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/memory.h> |
| #include <linux/gpio.h> |
| #include <linux/fsl_devices.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/common.h> |
| #include <mach/imx-uart.h> |
| #include <mach/iomux-mx35.h> |
| |
| #include "devices.h" |
| |
| static struct imxuart_platform_data uart_pdata = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &mxc_fec_device, |
| }; |
| |
| static struct pad_desc mx35pdk_pads[] = { |
| /* UART1 */ |
| MX35_PAD_CTS1__UART1_CTS, |
| MX35_PAD_RTS1__UART1_RTS, |
| MX35_PAD_TXD1__UART1_TXD_MUX, |
| MX35_PAD_RXD1__UART1_RXD_MUX, |
| /* FEC */ |
| MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, |
| MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, |
| MX35_PAD_FEC_RX_DV__FEC_RX_DV, |
| MX35_PAD_FEC_COL__FEC_COL, |
| MX35_PAD_FEC_RDATA0__FEC_RDATA_0, |
| MX35_PAD_FEC_TDATA0__FEC_TDATA_0, |
| MX35_PAD_FEC_TX_EN__FEC_TX_EN, |
| MX35_PAD_FEC_MDC__FEC_MDC, |
| MX35_PAD_FEC_MDIO__FEC_MDIO, |
| MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, |
| MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, |
| MX35_PAD_FEC_CRS__FEC_CRS, |
| MX35_PAD_FEC_RDATA1__FEC_RDATA_1, |
| MX35_PAD_FEC_TDATA1__FEC_TDATA_1, |
| MX35_PAD_FEC_RDATA2__FEC_RDATA_2, |
| MX35_PAD_FEC_TDATA2__FEC_TDATA_2, |
| MX35_PAD_FEC_RDATA3__FEC_RDATA_3, |
| MX35_PAD_FEC_TDATA3__FEC_TDATA_3, |
| /* USBOTG */ |
| MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, |
| MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, |
| }; |
| |
| /* OTG config */ |
| static struct fsl_usb2_platform_data usb_pdata = { |
| .operating_mode = FSL_USB2_DR_DEVICE, |
| .phy_mode = FSL_USB2_PHY_UTMI_WIDE, |
| }; |
| |
| /* |
| * Board specific initialization. |
| */ |
| static void __init mxc_board_init(void) |
| { |
| mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| |
| mxc_register_device(&mxc_uart_device0, &uart_pdata); |
| |
| mxc_register_device(&mxc_otg_udc_device, &usb_pdata); |
| } |
| |
| static void __init mx35pdk_timer_init(void) |
| { |
| mx35_clocks_init(); |
| } |
| |
| struct sys_timer mx35pdk_timer = { |
| .init = mx35pdk_timer_init, |
| }; |
| |
| MACHINE_START(MX35_3DS, "Freescale MX35PDK") |
| /* Maintainer: Freescale Semiconductor, Inc */ |
| .phys_io = MX35_AIPS1_BASE_ADDR, |
| .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, |
| .boot_params = MX3x_PHYS_OFFSET + 0x100, |
| .map_io = mx35_map_io, |
| .init_irq = mx35_init_irq, |
| .init_machine = mxc_board_init, |
| .timer = &mx35pdk_timer, |
| MACHINE_END |
