| ============================== |
| Fusion-MPT MPI 2.0 Header File Change History |
| ============================== |
| |
| Copyright (c) 2000-2009 LSI Corporation. |
| |
| --------------------------------------- |
| Header Set Release Version: 02.00.14 |
| Header Set Release Date: 10-28-09 |
| --------------------------------------- |
| |
| Filename Current version Prior version |
| ---------- --------------- ------------- |
| mpi2.h 02.00.14 02.00.13 |
| mpi2_cnfg.h 02.00.13 02.00.12 |
| mpi2_init.h 02.00.08 02.00.07 |
| mpi2_ioc.h 02.00.13 02.00.12 |
| mpi2_raid.h 02.00.04 02.00.04 |
| mpi2_sas.h 02.00.03 02.00.02 |
| mpi2_targ.h 02.00.03 02.00.03 |
| mpi2_tool.h 02.00.04 02.00.04 |
| mpi2_type.h 02.00.00 02.00.00 |
| mpi2_ra.h 02.00.00 02.00.00 |
| mpi2_hbd.h 02.00.00 |
| mpi2_history.txt 02.00.14 02.00.13 |
| |
| |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| |
| mpi2.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Moved ReplyPostHostIndex register to offset 0x6C of the |
| * MPI2_SYSTEM_INTERFACE_REGS and modified the define for |
| * MPI2_REPLY_POST_HOST_INDEX_OFFSET. |
| * Added union of request descriptors. |
| * Added union of reply descriptors. |
| * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Added define for MPI2_VERSION_02_00. |
| * Fixed the size of the FunctionDependent5 field in the |
| * MPI2_DEFAULT_REPLY structure. |
| * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Removed the MPI-defined Fault Codes and extended the |
| * product specific codes up to 0xEFFF. |
| * Added a sixth key value for the WriteSequence register |
| * and changed the flush value to 0x0. |
| * Added message function codes for Diagnostic Buffer Post |
| * and Diagnsotic Release. |
| * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED |
| * Moved MPI2_VERSION_UNION from mpi2_ioc.h. |
| * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Added #defines for marking a reply descriptor as unused. |
| * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Moved LUN field defines from mpi2_init.h. |
| * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. |
| * In all request and reply descriptors, replaced VF_ID |
| * field with MSIxIndex field. |
| * Removed DevHandle field from |
| * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those |
| * bytes reserved. |
| * Added RAID Accelerator functionality. |
| * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. |
| * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. |
| * Added MSI-x index mask and shift for Reply Post Host |
| * Index register. |
| * Added function code for Host Based Discovery Action. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_cnfg.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. |
| * Added Manufacturing Page 11. |
| * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE |
| * define. |
| * 06-26-07 02.00.02 Adding generic structure for product-specific |
| * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. |
| * Rework of BIOS Page 2 configuration page. |
| * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the |
| * forms. |
| * Added configuration pages IOC Page 8 and Driver |
| * Persistent Mapping Page 0. |
| * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated |
| * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, |
| * RAID Physical Disk Pages 0 and 1, RAID Configuration |
| * Page 0). |
| * Added new value for AccessStatus field of SAS Device |
| * Page 0 (_SATA_NEEDS_INITIALIZATION). |
| * 10-31-07 02.00.04 Added missing SEPDevHandle field to |
| * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for |
| * NVDATA. |
| * Modified IOC Page 7 to use masks and added field for |
| * SASBroadcastPrimitiveMasks. |
| * Added MPI2_CONFIG_PAGE_BIOS_4. |
| * Added MPI2_CONFIG_PAGE_LOG_0. |
| * 02-29-08 02.00.06 Modified various names to make them 32-character unique. |
| * Added SAS Device IDs. |
| * Updated Integrated RAID configuration pages including |
| * Manufacturing Page 4, IOC Page 6, and RAID Configuration |
| * Page 0. |
| * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. |
| * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. |
| * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. |
| * Added missing MaxNumRoutedSasAddresses field to |
| * MPI2_CONFIG_PAGE_EXPANDER_0. |
| * Added SAS Port Page 0. |
| * Modified structure layout for |
| * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. |
| * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use |
| * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. |
| * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF |
| * to 0x000000FF. |
| * Added two new values for the Physical Disk Coercion Size |
| * bits in the Flags field of Manufacturing Page 4. |
| * Added product-specific Manufacturing pages 16 to 31. |
| * Modified Flags bits for controlling write cache on SATA |
| * drives in IO Unit Page 1. |
| * Added new bit to AdditionalControlFlags of SAS IO Unit |
| * Page 1 to control Invalid Topology Correction. |
| * Added SupportedPhysDisks field to RAID Volume Page 1 and |
| * added related defines. |
| * Added additional defines for RAID Volume Page 0 |
| * VolumeStatusFlags field. |
| * Modified meaning of RAID Volume Page 0 VolumeSettings |
| * define for auto-configure of hot-swap drives. |
| * Added PhysDiskAttributes field (and related defines) to |
| * RAID Physical Disk Page 0. |
| * Added MPI2_SAS_PHYINFO_PHY_VACANT define. |
| * Added three new DiscoveryStatus bits for SAS IO Unit |
| * Page 0 and SAS Expander Page 0. |
| * Removed multiplexing information from SAS IO Unit pages. |
| * Added BootDeviceWaitTime field to SAS IO Unit Page 4. |
| * Removed Zone Address Resolved bit from PhyInfo and from |
| * Expander Page 0 Flags field. |
| * Added two new AccessStatus values to SAS Device Page 0 |
| * for indicating routing problems. Added 3 reserved words |
| * to this page. |
| * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. |
| * Inserted missing reserved field into structure for IOC |
| * Page 6. |
| * Added more pending task bits to RAID Volume Page 0 |
| * VolumeStatusFlags defines. |
| * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. |
| * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 |
| * and SAS Expander Page 0 to flag a downstream initiator |
| * when in simplified routing mode. |
| * Removed SATA Init Failure defines for DiscoveryStatus |
| * fields of SAS IO Unit Page 0 and SAS Expander Page 0. |
| * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. |
| * Added PortGroups, DmaGroup, and ControlGroup fields to |
| * SAS Device Page 0. |
| * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO |
| * Unit Page 6. |
| * Added expander reduced functionality data to SAS |
| * Expander Page 0. |
| * Added SAS PHY Page 2 and SAS PHY Page 3. |
| * 07-30-09 02.00.12 Added IO Unit Page 7. |
| * Added new device ids. |
| * Added SAS IO Unit Page 5. |
| * Added partial and slumber power management capable flags |
| * to SAS Device Page 0 Flags field. |
| * Added PhyInfo defines for power condition. |
| * Added Ethernet configuration pages. |
| * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. |
| * Added SAS PHY Page 4 structure and defines. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_init.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. |
| * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. |
| * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. |
| * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. |
| * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. |
| * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO |
| * Control field Task Attribute flags. |
| * Moved LUN field defines to mpi2.h becasue they are |
| * common to many structures. |
| * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to |
| * Query Asynchronous Event. |
| * Defined two new bits in the SlotStatus field of the SCSI |
| * Enclosure Processor Request and Reply. |
| * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for |
| * both SCSI IO Error Reply and SCSI Task Management Reply. |
| * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. |
| * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_ioc.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to |
| * MaxTargets. |
| * Added TotalImageSize field to FWDownload Request. |
| * Added reserved words to FWUpload Request. |
| * 06-26-07 02.00.02 Added IR Configuration Change List Event. |
| * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit |
| * request and replaced it with |
| * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. |
| * Replaced the MinReplyQueueDepth field of the IOCFacts |
| * reply with MaxReplyDescriptorPostQueueDepth. |
| * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum |
| * depth for the Reply Descriptor Post Queue. |
| * Added SASAddress field to Initiator Device Table |
| * Overflow Event data. |
| * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING |
| * for SAS Initiator Device Status Change Event data. |
| * Modified Reason Code defines for SAS Topology Change |
| * List Event data, including adding a bit for PHY Vacant |
| * status, and adding a mask for the Reason Code. |
| * Added define for |
| * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. |
| * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. |
| * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of |
| * the IOCFacts Reply. |
| * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. |
| * Moved MPI2_VERSION_UNION to mpi2.h. |
| * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks |
| * instead of enables, and added SASBroadcastPrimitiveMasks |
| * field. |
| * Added Log Entry Added Event and related structure. |
| * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. |
| * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. |
| * Added MaxVolumes and MaxPersistentEntries fields to |
| * IOCFacts reply. |
| * Added ProtocalFlags and IOCCapabilities fields to |
| * MPI2_FW_IMAGE_HEADER. |
| * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. |
| * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to |
| * a U16 (from a U32). |
| * Removed extra 's' from EventMasks name. |
| * 06-27-08 02.00.08 Fixed an offset in a comment. |
| * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. |
| * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and |
| * renamed MinReplyFrameSize to ReplyFrameSize. |
| * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. |
| * Added two new RAIDOperation values for Integrated RAID |
| * Operations Status Event data. |
| * Added four new IR Configuration Change List Event data |
| * ReasonCode values. |
| * Added two new ReasonCode defines for SAS Device Status |
| * Change Event data. |
| * Added three new DiscoveryStatus bits for the SAS |
| * Discovery event data. |
| * Added Multiplexing Status Change bit to the PhyStatus |
| * field of the SAS Topology Change List event data. |
| * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. |
| * BootFlags are now product-specific. |
| * Added defines for the indivdual signature bytes |
| * for MPI2_INIT_IMAGE_FOOTER. |
| * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. |
| * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR |
| * define. |
| * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE |
| * define. |
| * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. |
| * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. |
| * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. |
| * Added two new reason codes for SAS Device Status Change |
| * Event. |
| * Added new event: SAS PHY Counter. |
| * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. |
| * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. |
| * Added new product id family for 2208. |
| * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. |
| * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. |
| * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. |
| * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. |
| * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. |
| * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. |
| * Added Host Based Discovery Phy Event data. |
| * Added defines for ProductID Product field |
| * (MPI2_FW_HEADER_PID_). |
| * Modified values for SAS ProductID Family |
| * (MPI2_FW_HEADER_PID_FAMILY_). |
| * -------------------------------------------------------------------------- |
| |
| mpi2_raid.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 08-31-07 02.00.01 Modifications to RAID Action request and reply, |
| * including the Actions and ActionData. |
| * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. |
| * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that |
| * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT |
| * can be sized by the build environment. |
| * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of |
| * VolumeCreationFlags and marked the old one as obsolete. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_sas.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit |
| * Control Request. |
| * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control |
| * Request. |
| * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST |
| * to MPI2_SGE_IO_UNION since it supports chained SGLs. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_targ.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to |
| * BufferPostFlags field of CommandBufferPostBase Request. |
| * 02-29-08 02.00.02 Modified various names to make them 32-character unique. |
| * 10-02-08 02.00.03 Removed NextCmdBufferOffset from |
| * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. |
| * Target Status Send Request only takes a single SGE for |
| * response data. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_tool.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release |
| * structures and defines. |
| * 02-29-08 02.00.02 Modified various names to make them 32-character unique. |
| * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. |
| * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request |
| * and reply messages. |
| * Added MPI2_DIAG_BUF_TYPE_EXTENDED. |
| * Incremented MPI2_DIAG_BUF_TYPE_COUNT. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_type.h |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_ra.h |
| * 05-06-09 02.00.00 Initial version. |
| * -------------------------------------------------------------------------- |
| |
| mpi2_hbd.h |
| * 10-28-09 02.00.00 Initial version. |
| * -------------------------------------------------------------------------- |
| |
| |
| mpi2_history.txt Parts list history |
| |
| Filename 02.00.14 02.00.13 02.00.12 |
| ---------- -------- -------- -------- |
| mpi2.h 02.00.14 02.00.13 02.00.12 |
| mpi2_cnfg.h 02.00.13 02.00.12 02.00.11 |
| mpi2_init.h 02.00.08 02.00.07 02.00.07 |
| mpi2_ioc.h 02.00.13 02.00.12 02.00.11 |
| mpi2_raid.h 02.00.04 02.00.04 02.00.03 |
| mpi2_sas.h 02.00.03 02.00.02 02.00.02 |
| mpi2_targ.h 02.00.03 02.00.03 02.00.03 |
| mpi2_tool.h 02.00.04 02.00.04 02.00.03 |
| mpi2_type.h 02.00.00 02.00.00 02.00.00 |
| mpi2_ra.h 02.00.00 02.00.00 02.00.00 |
| mpi2_hbd.h 02.00.00 |
| |
| Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 |
| ---------- -------- -------- -------- -------- -------- -------- |
| mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 |
| mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06 |
| mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03 |
| mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06 |
| mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02 |
| mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 |
| mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02 |
| mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 |
| mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 |
| |
| Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 |
| ---------- -------- -------- -------- -------- -------- -------- |
| mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 |
| mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 |
| mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 |
| mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 |
| mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 |
| mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 |
| mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 |
| mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 |
| mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 |
| |