| /* |
| * New-style PCI core. |
| * |
| * Copyright (c) 2004 - 2009 Paul Mundt |
| * Copyright (c) 2002 M. R. Brown |
| * |
| * Modelled after arch/mips/pci/pci.c: |
| * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/dma-debug.h> |
| #include <linux/io.h> |
| #include <linux/mutex.h> |
| |
| unsigned long PCIBIOS_MIN_IO = 0x0000; |
| unsigned long PCIBIOS_MIN_MEM = 0; |
| |
| /* |
| * The PCI controller list. |
| */ |
| static struct pci_channel *hose_head, **hose_tail = &hose_head; |
| |
| static int pci_initialized; |
| |
| static void __devinit pcibios_scanbus(struct pci_channel *hose) |
| { |
| static int next_busno; |
| struct pci_bus *bus; |
| |
| bus = pci_scan_bus(next_busno, hose->pci_ops, hose); |
| if (bus) { |
| next_busno = bus->subordinate + 1; |
| /* Don't allow 8-bit bus number overflow inside the hose - |
| reserve some space for bridges. */ |
| if (next_busno > 224) |
| next_busno = 0; |
| |
| pci_bus_size_bridges(bus); |
| pci_bus_assign_resources(bus); |
| pci_enable_bridges(bus); |
| } |
| } |
| |
| static DEFINE_MUTEX(pci_scan_mutex); |
| |
| void __devinit register_pci_controller(struct pci_channel *hose) |
| { |
| request_resource(&iomem_resource, hose->mem_resource); |
| request_resource(&ioport_resource, hose->io_resource); |
| |
| *hose_tail = hose; |
| hose_tail = &hose->next; |
| |
| /* |
| * Do not panic here but later - this might hapen before console init. |
| */ |
| if (!hose->io_map_base) { |
| printk(KERN_WARNING |
| "registering PCI controller with io_map_base unset\n"); |
| } |
| |
| /* |
| * Scan the bus if it is register after the PCI subsystem |
| * initialization. |
| */ |
| if (pci_initialized) { |
| mutex_lock(&pci_scan_mutex); |
| pcibios_scanbus(hose); |
| mutex_unlock(&pci_scan_mutex); |
| } |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_channel *hose; |
| |
| /* Scan all of the recorded PCI controllers. */ |
| for (hose = hose_head; hose; hose = hose->next) |
| pcibios_scanbus(hose); |
| |
| pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); |
| |
| dma_debug_add_bus(&pci_bus_type); |
| |
| pci_initialized = 1; |
| |
| return 0; |
| } |
| subsys_initcall(pcibios_init); |
| |
| static void pcibios_fixup_device_resources(struct pci_dev *dev, |
| struct pci_bus *bus) |
| { |
| /* Update device resources. */ |
| struct pci_channel *hose = bus->sysdata; |
| unsigned long offset = 0; |
| int i; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| if (!dev->resource[i].start) |
| continue; |
| if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) |
| continue; |
| if (dev->resource[i].flags & IORESOURCE_IO) |
| offset = hose->io_offset; |
| else if (dev->resource[i].flags & IORESOURCE_MEM) |
| offset = hose->mem_offset; |
| |
| dev->resource[i].start += offset; |
| dev->resource[i].end += offset; |
| } |
| } |
| |
| /* |
| * Called after each bus is probed, but before its children |
| * are examined. |
| */ |
| void __devinit pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_dev *dev = bus->self; |
| struct list_head *ln; |
| struct pci_channel *chan = bus->sysdata; |
| |
| if (!dev) { |
| bus->resource[0] = chan->io_resource; |
| bus->resource[1] = chan->mem_resource; |
| } |
| |
| for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { |
| dev = pci_dev_b(ln); |
| |
| if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) |
| pcibios_fixup_device_resources(dev, bus); |
| } |
| } |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| */ |
| resource_size_t pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| struct pci_dev *dev = data; |
| struct pci_channel *chan = dev->sysdata; |
| resource_size_t start = res->start; |
| |
| if (res->flags & IORESOURCE_IO) { |
| if (start < PCIBIOS_MIN_IO + chan->io_resource->start) |
| start = PCIBIOS_MIN_IO + chan->io_resource->start; |
| |
| /* |
| * Put everything into 0x00-0xff region modulo 0x400. |
| */ |
| if (start & 0x300) { |
| start = (start + 0x3ff) & ~0x3ff; |
| res->start = start; |
| } |
| } else if (res->flags & IORESOURCE_MEM) { |
| if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) |
| start = PCIBIOS_MIN_MEM + chan->mem_resource->start; |
| } |
| |
| return start; |
| } |
| |
| void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, |
| struct resource *res) |
| { |
| struct pci_channel *hose = dev->sysdata; |
| unsigned long offset = 0; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = hose->io_offset; |
| else if (res->flags & IORESOURCE_MEM) |
| offset = hose->mem_offset; |
| |
| region->start = res->start - offset; |
| region->end = res->end - offset; |
| } |
| |
| void __devinit |
| pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, |
| struct pci_bus_region *region) |
| { |
| struct pci_channel *hose = dev->sysdata; |
| unsigned long offset = 0; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = hose->io_offset; |
| else if (res->flags & IORESOURCE_MEM) |
| offset = hose->mem_offset; |
| |
| res->start = region->start + offset; |
| res->end = region->end + offset; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<idx))) |
| continue; |
| |
| r = &dev->resource[idx]; |
| if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) |
| continue; |
| if ((idx == PCI_ROM_RESOURCE) && |
| (!(r->flags & IORESOURCE_ROM_ENABLE))) |
| continue; |
| if (!r->start && r->end) { |
| printk(KERN_ERR "PCI: Device %s not available " |
| "because of resource collisions\n", |
| pci_name(dev)); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (cmd != old_cmd) { |
| printk("PCI: Enabling device %s (%04x -> %04x)\n", |
| pci_name(dev), old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* |
| * If we set up a device for bus mastering, we need to check and set |
| * the latency timer as it may not be properly set. |
| */ |
| static unsigned int pcibios_max_latency = 255; |
| |
| void pcibios_set_master(struct pci_dev *dev) |
| { |
| u8 lat; |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); |
| if (lat < 16) |
| lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; |
| else if (lat > pcibios_max_latency) |
| lat = pcibios_max_latency; |
| else |
| return; |
| printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", |
| pci_name(dev), lat); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); |
| } |
| |
| void __init pcibios_update_irq(struct pci_dev *dev, int irq) |
| { |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); |
| } |
| |
| char * __devinit pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, int write_combine) |
| { |
| /* |
| * I/O space can be accessed via normal processor loads and stores on |
| * this platform but for now we elect not to do this and portable |
| * drivers should not do this anyway. |
| */ |
| if (mmap_state == pci_mmap_io) |
| return -EINVAL; |
| |
| /* |
| * Ignore write-combine; for now only return uncached mappings. |
| */ |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| |
| return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, |
| vma->vm_end - vma->vm_start, |
| vma->vm_page_prot); |
| } |
| |
| #ifndef CONFIG_GENERIC_IOMAP |
| |
| static void __iomem *ioport_map_pci(struct pci_dev *dev, |
| unsigned long port, unsigned int nr) |
| { |
| struct pci_channel *chan = dev->sysdata; |
| |
| if (!chan->io_map_base) |
| chan->io_map_base = generic_io_base; |
| |
| return (void __iomem *)(chan->io_map_base + port); |
| } |
| |
| void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) |
| { |
| resource_size_t start = pci_resource_start(dev, bar); |
| resource_size_t len = pci_resource_len(dev, bar); |
| unsigned long flags = pci_resource_flags(dev, bar); |
| |
| if (unlikely(!len || !start)) |
| return NULL; |
| if (maxlen && len > maxlen) |
| len = maxlen; |
| |
| if (flags & IORESOURCE_IO) |
| return ioport_map_pci(dev, start, len); |
| |
| /* |
| * Presently the IORESOURCE_MEM case is a bit special, most |
| * SH7751 style PCI controllers have PCI memory at a fixed |
| * location in the address space where no remapping is desired. |
| * With the IORESOURCE_MEM case more care has to be taken |
| * to inhibit page table mapping for legacy cores, but this is |
| * punted off to __ioremap(). |
| * -- PFM. |
| */ |
| if (flags & IORESOURCE_MEM) { |
| if (flags & IORESOURCE_CACHEABLE) |
| return ioremap(start, len); |
| |
| return ioremap_nocache(start, len); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(pci_iomap); |
| |
| void pci_iounmap(struct pci_dev *dev, void __iomem *addr) |
| { |
| iounmap(addr); |
| } |
| EXPORT_SYMBOL(pci_iounmap); |
| |
| #endif /* CONFIG_GENERIC_IOMAP */ |
| |
| #ifdef CONFIG_HOTPLUG |
| EXPORT_SYMBOL(pcibios_resource_to_bus); |
| EXPORT_SYMBOL(pcibios_bus_to_resource); |
| EXPORT_SYMBOL(PCIBIOS_MIN_IO); |
| EXPORT_SYMBOL(PCIBIOS_MIN_MEM); |
| #endif |