| |
| /* low-level asm for "intrigue" (PA8500-8700 CPU perf counters) |
| * |
| * Copyright (C) 2001 Randolph Chung <tausq at parisc-linux.org> |
| * Copyright (C) 2001 Hewlett-Packard (Grant Grundler) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <asm/assembly.h> |
| #include <linux/linkage.h> |
| |
| #ifdef CONFIG_64BIT |
| .level 2.0w |
| #endif /* CONFIG_64BIT */ |
| |
| #define MTDIAG_1(gr) .word 0x14201840 + gr*0x10000 |
| #define MTDIAG_2(gr) .word 0x14401840 + gr*0x10000 |
| #define MFDIAG_1(gr) .word 0x142008A0 + gr |
| #define MFDIAG_2(gr) .word 0x144008A0 + gr |
| #define STDIAG(dr) .word 0x14000AA0 + dr*0x200000 |
| #define SFDIAG(dr) .word 0x14000BA0 + dr*0x200000 |
| #define DR2_SLOW_RET 53 |
| |
| |
| ; |
| ; Enable the performance counters |
| ; |
| ; The coprocessor only needs to be enabled when |
| ; starting/stopping the coprocessor with the pmenb/pmdis. |
| ; |
| .text |
| |
| ENTRY(perf_intrigue_enable_perf_counters) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| |
| ldi 0x20,%r25 ; load up perfmon bit |
| mfctl ccr,%r26 ; get coprocessor register |
| or %r25,%r26,%r26 ; set bit |
| mtctl %r26,ccr ; turn on performance coprocessor |
| pmenb ; enable performance monitor |
| ssm 0,0 ; dummy op to ensure completion |
| sync ; follow ERS |
| andcm %r26,%r25,%r26 ; clear bit now |
| mtctl %r26,ccr ; turn off performance coprocessor |
| nop ; NOPs as specified in ERS |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| bve (%r2) |
| nop |
| .exit |
| .procend |
| ENDPROC(perf_intrigue_enable_perf_counters) |
| |
| ENTRY(perf_intrigue_disable_perf_counters) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| ldi 0x20,%r25 ; load up perfmon bit |
| mfctl ccr,%r26 ; get coprocessor register |
| or %r25,%r26,%r26 ; set bit |
| mtctl %r26,ccr ; turn on performance coprocessor |
| pmdis ; disable performance monitor |
| ssm 0,0 ; dummy op to ensure completion |
| andcm %r26,%r25,%r26 ; clear bit now |
| bve (%r2) |
| mtctl %r26,ccr ; turn off performance coprocessor |
| .exit |
| .procend |
| ENDPROC(perf_intrigue_disable_perf_counters) |
| |
| ;*********************************************************************** |
| ;* |
| ;* Name: perf_rdr_shift_in_W |
| ;* |
| ;* Description: |
| ;* This routine shifts data in from the RDR in arg0 and returns |
| ;* the result in ret0. If the RDR is <= 64 bits in length, it |
| ;* is shifted shifted backup immediately. This is to compensate |
| ;* for RDR10 which has bits that preclude PDC stack operations |
| ;* when they are in the wrong state. |
| ;* |
| ;* Arguments: |
| ;* arg0 : rdr to be read |
| ;* arg1 : bit length of rdr |
| ;* |
| ;* Returns: |
| ;* ret0 = next 64 bits of rdr data from staging register |
| ;* |
| ;* Register usage: |
| ;* arg0 : rdr to be read |
| ;* arg1 : bit length of rdr |
| ;* %r24 - original DR2 value |
| ;* %r1 - scratch |
| ;* %r29 - scratch |
| ;* |
| ;* Returns: |
| ;* ret0 = RDR data (right justified) |
| ;* |
| ;*********************************************************************** |
| |
| ENTRY(perf_rdr_shift_in_W) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| ; |
| ; read(shift in) the RDR. |
| ; |
| |
| ; NOTE: The PCX-W ERS states that DR2_SLOW_RET must be set before any |
| ; shifting is done, from or to, remote diagnose registers. |
| ; |
| |
| depdi,z 1,DR2_SLOW_RET,1,%r29 |
| MFDIAG_2 (24) |
| or %r24,%r29,%r29 |
| MTDIAG_2 (29) ; set DR2_SLOW_RET |
| |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; Cacheline start (32-byte cacheline) |
| ; |
| nop |
| nop |
| nop |
| extrd,u arg1,63,6,%r1 ; setup shift amount by bits to move |
| |
| mtsar %r1 |
| shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number |
| blr %r1,%r0 ; branch to 8-instruction sequence |
| nop |
| |
| ; |
| ; Cacheline start (32-byte cacheline) |
| ; |
| |
| ; |
| ; RDR 0 sequence |
| ; |
| SFDIAG (0) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) ; mtdiag %dr1, %r1 |
| STDIAG (0) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 1 sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (1) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| |
| ; |
| ; RDR 2 read sequence |
| ; |
| SFDIAG (2) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (2) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 3 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 4 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (4) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 5 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (5) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 6 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (6) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 7 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 8 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 9 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 10 read sequence |
| ; |
| SFDIAG (10) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (10) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 11 read sequence |
| ; |
| SFDIAG (11) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (11) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 12 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 13 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (13) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 14 read sequence |
| ; |
| SFDIAG (14) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (14) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 15 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (15) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| |
| ; |
| ; RDR 16 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (16) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 17 read sequence |
| ; |
| SFDIAG (17) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (17) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 18 read sequence |
| ; |
| SFDIAG (18) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (18) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 19 read sequence |
| ; |
| b,n perf_rdr_shift_in_W_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; RDR 20 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (20) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 21 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (21) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 22 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (22) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 23 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (23) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 24 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (24) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 25 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (25) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 26 read sequence |
| ; |
| SFDIAG (26) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (26) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 27 read sequence |
| ; |
| SFDIAG (27) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (27) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 28 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (28) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 29 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (29) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 30 read sequence |
| ; |
| SFDIAG (30) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (30) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_W_leave |
| |
| ; |
| ; RDR 31 read sequence |
| ; |
| sync |
| ssm 0,0 |
| SFDIAG (31) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; Fallthrough |
| ; |
| |
| perf_rdr_shift_in_W_leave: |
| bve (%r2) |
| .exit |
| MTDIAG_2 (24) ; restore DR2 |
| .procend |
| ENDPROC(perf_rdr_shift_in_W) |
| |
| |
| ;*********************************************************************** |
| ;* |
| ;* Name: perf_rdr_shift_out_W |
| ;* |
| ;* Description: |
| ;* This routine moves data to the RDR's. The double-word that |
| ;* arg1 points to is loaded and moved into the staging register. |
| ;* Then the STDIAG instruction for the RDR # in arg0 is called |
| ;* to move the data to the RDR. |
| ;* |
| ;* Arguments: |
| ;* arg0 = rdr number |
| ;* arg1 = 64-bit value to write |
| ;* %r24 - DR2 | DR2_SLOW_RET |
| ;* %r23 - original DR2 value |
| ;* |
| ;* Returns: |
| ;* None |
| ;* |
| ;* Register usage: |
| ;* |
| ;*********************************************************************** |
| |
| ENTRY(perf_rdr_shift_out_W) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| ; |
| ; NOTE: The PCX-W ERS states that DR2_SLOW_RET must be set before any |
| ; shifting is done, from or to, the remote diagnose registers. |
| ; |
| |
| depdi,z 1,DR2_SLOW_RET,1,%r24 |
| MFDIAG_2 (23) |
| or %r24,%r23,%r24 |
| MTDIAG_2 (24) ; set DR2_SLOW_RET |
| MTDIAG_1 (25) ; data to the staging register |
| shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number |
| blr %r1,%r0 ; branch to 8-instruction sequence |
| nop |
| |
| ; |
| ; RDR 0 write sequence |
| ; |
| sync ; RDR 0 write sequence |
| ssm 0,0 |
| STDIAG (0) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 1 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (1) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 2 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (2) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 3 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (3) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 4 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (4) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 5 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (5) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 6 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (6) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 7 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (7) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 8 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (8) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 9 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (9) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 10 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (10) |
| STDIAG (26) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 11 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (11) |
| STDIAG (27) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 12 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (12) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 13 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (13) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 14 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (14) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 15 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (15) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 16 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (16) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 17 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (17) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 18 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (18) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 19 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (19) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 20 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (20) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 21 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (21) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 22 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (22) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 23 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (23) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 24 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (24) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 25 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (25) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 26 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (10) |
| STDIAG (26) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 27 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (11) |
| STDIAG (27) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 28 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (28) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 29 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (29) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 30 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (30) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| ; |
| ; RDR 31 write sequence |
| ; |
| sync |
| ssm 0,0 |
| STDIAG (31) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_W_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| perf_rdr_shift_out_W_leave: |
| bve (%r2) |
| .exit |
| MTDIAG_2 (23) ; restore DR2 |
| .procend |
| ENDPROC(perf_rdr_shift_out_W) |
| |
| |
| ;*********************************************************************** |
| ;* |
| ;* Name: rdr_shift_in_U |
| ;* |
| ;* Description: |
| ;* This routine shifts data in from the RDR in arg0 and returns |
| ;* the result in ret0. If the RDR is <= 64 bits in length, it |
| ;* is shifted shifted backup immediately. This is to compensate |
| ;* for RDR10 which has bits that preclude PDC stack operations |
| ;* when they are in the wrong state. |
| ;* |
| ;* Arguments: |
| ;* arg0 : rdr to be read |
| ;* arg1 : bit length of rdr |
| ;* |
| ;* Returns: |
| ;* ret0 = next 64 bits of rdr data from staging register |
| ;* |
| ;* Register usage: |
| ;* arg0 : rdr to be read |
| ;* arg1 : bit length of rdr |
| ;* %r24 - original DR2 value |
| ;* %r23 - DR2 | DR2_SLOW_RET |
| ;* %r1 - scratch |
| ;* |
| ;*********************************************************************** |
| |
| ENTRY(perf_rdr_shift_in_U) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| |
| ; read(shift in) the RDR. |
| ; |
| ; NOTE: The PCX-U ERS states that DR2_SLOW_RET must be set before any |
| ; shifting is done, from or to, remote diagnose registers. |
| |
| depdi,z 1,DR2_SLOW_RET,1,%r29 |
| MFDIAG_2 (24) |
| or %r24,%r29,%r29 |
| MTDIAG_2 (29) ; set DR2_SLOW_RET |
| |
| nop |
| nop |
| nop |
| nop |
| |
| ; |
| ; Start of next 32-byte cacheline |
| ; |
| nop |
| nop |
| nop |
| extrd,u arg1,63,6,%r1 |
| |
| mtsar %r1 |
| shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number |
| blr %r1,%r0 ; branch to 8-instruction sequence |
| nop |
| |
| ; |
| ; Start of next 32-byte cacheline |
| ; |
| SFDIAG (0) ; RDR 0 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (0) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (1) ; RDR 1 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (1) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| sync ; RDR 2 read sequence |
| ssm 0,0 |
| SFDIAG (4) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 3 read sequence |
| ssm 0,0 |
| SFDIAG (3) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 4 read sequence |
| ssm 0,0 |
| SFDIAG (4) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 5 read sequence |
| ssm 0,0 |
| SFDIAG (5) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 6 read sequence |
| ssm 0,0 |
| SFDIAG (6) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 7 read sequence |
| ssm 0,0 |
| SFDIAG (7) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| b,n perf_rdr_shift_in_U_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| SFDIAG (9) ; RDR 9 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (9) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (10) ; RDR 10 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (10) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (11) ; RDR 11 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (11) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (12) ; RDR 12 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (12) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (13) ; RDR 13 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (13) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (14) ; RDR 14 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (14) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (15) ; RDR 15 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (15) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| sync ; RDR 16 read sequence |
| ssm 0,0 |
| SFDIAG (16) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| SFDIAG (17) ; RDR 17 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (17) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (18) ; RDR 18 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (18) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| b,n perf_rdr_shift_in_U_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| sync ; RDR 20 read sequence |
| ssm 0,0 |
| SFDIAG (20) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 21 read sequence |
| ssm 0,0 |
| SFDIAG (21) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 22 read sequence |
| ssm 0,0 |
| SFDIAG (22) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 23 read sequence |
| ssm 0,0 |
| SFDIAG (23) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 24 read sequence |
| ssm 0,0 |
| SFDIAG (24) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 25 read sequence |
| ssm 0,0 |
| SFDIAG (25) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| SFDIAG (26) ; RDR 26 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (26) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (27) ; RDR 27 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (27) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| sync ; RDR 28 read sequence |
| ssm 0,0 |
| SFDIAG (28) |
| ssm 0,0 |
| MFDIAG_1 (28) |
| b,n perf_rdr_shift_in_U_leave |
| ssm 0,0 |
| nop |
| |
| b,n perf_rdr_shift_in_U_leave |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| SFDIAG (30) ; RDR 30 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (30) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| |
| SFDIAG (31) ; RDR 31 read sequence |
| ssm 0,0 |
| MFDIAG_1 (28) |
| shrpd ret0,%r0,%sar,%r1 |
| MTDIAG_1 (1) |
| STDIAG (31) |
| ssm 0,0 |
| b,n perf_rdr_shift_in_U_leave |
| nop |
| |
| perf_rdr_shift_in_U_leave: |
| bve (%r2) |
| .exit |
| MTDIAG_2 (24) ; restore DR2 |
| .procend |
| ENDPROC(perf_rdr_shift_in_U) |
| |
| ;*********************************************************************** |
| ;* |
| ;* Name: rdr_shift_out_U |
| ;* |
| ;* Description: |
| ;* This routine moves data to the RDR's. The double-word that |
| ;* arg1 points to is loaded and moved into the staging register. |
| ;* Then the STDIAG instruction for the RDR # in arg0 is called |
| ;* to move the data to the RDR. |
| ;* |
| ;* Arguments: |
| ;* arg0 = rdr target |
| ;* arg1 = buffer pointer |
| ;* |
| ;* Returns: |
| ;* None |
| ;* |
| ;* Register usage: |
| ;* arg0 = rdr target |
| ;* arg1 = buffer pointer |
| ;* %r24 - DR2 | DR2_SLOW_RET |
| ;* %r23 - original DR2 value |
| ;* |
| ;*********************************************************************** |
| |
| ENTRY(perf_rdr_shift_out_U) |
| .proc |
| .callinfo frame=0,NO_CALLS |
| .entry |
| |
| ; |
| ; NOTE: The PCX-U ERS states that DR2_SLOW_RET must be set before any |
| ; shifting is done, from or to, the remote diagnose registers. |
| ; |
| |
| depdi,z 1,DR2_SLOW_RET,1,%r24 |
| MFDIAG_2 (23) |
| or %r24,%r23,%r24 |
| MTDIAG_2 (24) ; set DR2_SLOW_RET |
| |
| MTDIAG_1 (25) ; data to the staging register |
| shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number |
| blr %r1,%r0 ; branch to 8-instruction sequence |
| nop |
| |
| ; |
| ; 32-byte cachline aligned |
| ; |
| |
| sync ; RDR 0 write sequence |
| ssm 0,0 |
| STDIAG (0) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 1 write sequence |
| ssm 0,0 |
| STDIAG (1) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 2 write sequence |
| ssm 0,0 |
| STDIAG (2) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 3 write sequence |
| ssm 0,0 |
| STDIAG (3) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 4 write sequence |
| ssm 0,0 |
| STDIAG (4) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 5 write sequence |
| ssm 0,0 |
| STDIAG (5) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 6 write sequence |
| ssm 0,0 |
| STDIAG (6) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 7 write sequence |
| ssm 0,0 |
| STDIAG (7) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 8 write sequence |
| ssm 0,0 |
| STDIAG (8) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 9 write sequence |
| ssm 0,0 |
| STDIAG (9) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 10 write sequence |
| ssm 0,0 |
| STDIAG (10) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 11 write sequence |
| ssm 0,0 |
| STDIAG (11) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 12 write sequence |
| ssm 0,0 |
| STDIAG (12) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 13 write sequence |
| ssm 0,0 |
| STDIAG (13) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 14 write sequence |
| ssm 0,0 |
| STDIAG (14) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 15 write sequence |
| ssm 0,0 |
| STDIAG (15) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 16 write sequence |
| ssm 0,0 |
| STDIAG (16) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 17 write sequence |
| ssm 0,0 |
| STDIAG (17) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 18 write sequence |
| ssm 0,0 |
| STDIAG (18) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 19 write sequence |
| ssm 0,0 |
| STDIAG (19) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 20 write sequence |
| ssm 0,0 |
| STDIAG (20) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 21 write sequence |
| ssm 0,0 |
| STDIAG (21) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 22 write sequence |
| ssm 0,0 |
| STDIAG (22) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 23 write sequence |
| ssm 0,0 |
| STDIAG (23) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 24 write sequence |
| ssm 0,0 |
| STDIAG (24) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 25 write sequence |
| ssm 0,0 |
| STDIAG (25) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 26 write sequence |
| ssm 0,0 |
| STDIAG (26) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 27 write sequence |
| ssm 0,0 |
| STDIAG (27) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 28 write sequence |
| ssm 0,0 |
| STDIAG (28) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 29 write sequence |
| ssm 0,0 |
| STDIAG (29) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 30 write sequence |
| ssm 0,0 |
| STDIAG (30) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| sync ; RDR 31 write sequence |
| ssm 0,0 |
| STDIAG (31) |
| ssm 0,0 |
| b,n perf_rdr_shift_out_U_leave |
| nop |
| ssm 0,0 |
| nop |
| |
| perf_rdr_shift_out_U_leave: |
| bve (%r2) |
| .exit |
| MTDIAG_2 (23) ; restore DR2 |
| .procend |
| ENDPROC(perf_rdr_shift_out_U) |
| |
