| /* |
| * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ |
| #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ |
| |
| #include <mach/hardware.h> |
| |
| /* Base address of PBC controller */ |
| #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) |
| /* Offsets for the PBC Controller register */ |
| |
| /* PBC Board status register offset */ |
| #define PBC_BSTAT 0x000002 |
| |
| /* PBC Board control register 1 set address */ |
| #define PBC_BCTRL1_SET 0x000004 |
| |
| /* PBC Board control register 1 clear address */ |
| #define PBC_BCTRL1_CLEAR 0x000006 |
| |
| /* PBC Board control register 2 set address */ |
| #define PBC_BCTRL2_SET 0x000008 |
| |
| /* PBC Board control register 2 clear address */ |
| #define PBC_BCTRL2_CLEAR 0x00000A |
| |
| /* PBC Board control register 3 set address */ |
| #define PBC_BCTRL3_SET 0x00000C |
| |
| /* PBC Board control register 3 clear address */ |
| #define PBC_BCTRL3_CLEAR 0x00000E |
| |
| /* PBC Board control register 4 set address */ |
| #define PBC_BCTRL4_SET 0x000010 |
| |
| /* PBC Board control register 4 clear address */ |
| #define PBC_BCTRL4_CLEAR 0x000012 |
| |
| /* PBC Board status register 1 */ |
| #define PBC_BSTAT1 0x000014 |
| |
| /* PBC Board interrupt status register */ |
| #define PBC_INTSTATUS 0x000016 |
| |
| /* PBC Board interrupt current status register */ |
| #define PBC_INTCURR_STATUS 0x000018 |
| |
| /* PBC Interrupt mask register set address */ |
| #define PBC_INTMASK_SET 0x00001A |
| |
| /* PBC Interrupt mask register clear address */ |
| #define PBC_INTMASK_CLEAR 0x00001C |
| |
| /* External UART A */ |
| #define PBC_SC16C652_UARTA 0x010000 |
| |
| /* External UART B */ |
| #define PBC_SC16C652_UARTB 0x010010 |
| |
| /* Ethernet Controller IO base address */ |
| #define PBC_CS8900A_IOBASE 0x020000 |
| |
| /* Ethernet Controller Memory base address */ |
| #define PBC_CS8900A_MEMBASE 0x021000 |
| |
| /* Ethernet Controller DMA base address */ |
| #define PBC_CS8900A_DMABASE 0x022000 |
| |
| /* External chip select 0 */ |
| #define PBC_XCS0 0x040000 |
| |
| /* LCD Display enable */ |
| #define PBC_LCD_EN_B 0x060000 |
| |
| /* Code test debug enable */ |
| #define PBC_CODE_B 0x070000 |
| |
| /* PSRAM memory select */ |
| #define PBC_PSRAM_B 0x5000000 |
| |
| #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) |
| #define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) |
| #define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) |
| #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) |
| #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) |
| |
| #define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) |
| #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) |
| |
| #define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) |
| #define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) |
| #define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) |
| #define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) |
| #define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) |
| #define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) |
| #define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) |
| #define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) |
| #define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) |
| #define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) |
| #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) |
| #define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) |
| #define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) |
| #define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) |
| #define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) |
| #define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) |
| |
| #define MXC_MAX_EXP_IO_LINES 16 |
| |
| /* mandatory for CONFIG_LL_DEBUG */ |
| |
| #define MXC_LL_UART_PADDR UART1_BASE_ADDR |
| #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) |
| |
| #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ |
