blob: 7140d838339e1a9e2ef691ff4079ea022f4d964c [file] [log] [blame]
/*
* This file contains the power_save function for Power7 CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
#include <asm/hw_irq.h>
#include <asm/kvm_book3s_asm.h>
#undef DEBUG
.text
_GLOBAL(power7_idle)
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
* stick a pointer to it in PACAR1. We really only
* need to save PC, some CR bits and the NV GPRs,
* but for now an interrupt frame will do.
*/
mflr r0
std r0,16(r1)
stdu r1,-INT_FRAME_SIZE(r1)
std r0,_LINK(r1)
std r0,_NIP(r1)
#ifndef CONFIG_SMP
/* Make sure FPU, VSX etc... are flushed as we may lose
* state when going to nap mode
*/
bl .discard_lazy_cpu_state
#endif /* CONFIG_SMP */
/* Hard disable interrupts */
mfmsr r9
rldicl r9,r9,48,1
rotldi r9,r9,16
mtmsrd r9,1 /* hard-disable interrupts */
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
beq 1f
addi r1,r1,INT_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
1: /* We mark irqs hard disabled as this is the state we'll
* be in when returning and we need to tell arch_local_irq_restore()
* about it
*/
li r0,PACA_IRQ_HARD_DIS
stb r0,PACAIRQHAPPENED(r13)
/* We haven't lost state ... yet */
li r0,0
stb r0,PACA_NAPSTATELOST(r13)
/* Continue saving state */
SAVE_GPR(2, r1)
SAVE_NVGPRS(r1)
mfcr r3
std r3,_CCR(r1)
std r9,_MSR(r1)
std r1,PACAR1(r13)
#ifdef CONFIG_KVM_BOOK3S_64_HV
/* Tell KVM we're napping */
li r4,KVM_HWTHREAD_IN_NAP
stb r4,HSTATE_HWTHREAD_STATE(r13)
#endif
/* Magic NAP mode enter sequence */
std r0,0(r1)
ptesync
ld r0,0(r1)
1: cmp cr0,r0,r0
bne 1b
PPC_NAP
b .
_GLOBAL(power7_wakeup_loss)
ld r1,PACAR1(r13)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r3,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r3
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
_GLOBAL(power7_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
bne .power7_wakeup_loss
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid