blob: c92e41b4faf4f3047d8b36cc1e275ae9c95956f6 [file] [log] [blame]
/**
* This file contains definitions of WLAN commands.
*/
#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_
/** PUBLIC DEFINITIONS */
#define DEFAULT_AD_HOC_CHANNEL 6
#define DEFAULT_AD_HOC_CHANNEL_A 36
/** IEEE 802.11 oids */
#define OID_802_11_SSID 0x00008002
#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
#define OID_802_11_RTS_THRESHOLD 0x0000800A
#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
#define OID_802_11_SUPPORTED_RATES 0x0000800E
#define OID_802_11_STATISTICS 0x00008012
#define OID_802_11_TX_RETRYCOUNT 0x0000801D
#define OID_802_11D_ENABLE 0x00008020
#define CMD_OPTION_WAITFORRSP 0x0002
/** Host command IDs */
/* Return command are almost always the same as the host command, but with
* bit 15 set high. There are a few exceptions, though...
*/
#define CMD_RET(cmd) (0x8000 | cmd)
/* Return command convention exceptions: */
#define CMD_RET_802_11_ASSOCIATE 0x8012
/* Command codes */
#define CMD_GET_HW_SPEC 0x0003
#define CMD_EEPROM_UPDATE 0x0004
#define CMD_802_11_RESET 0x0005
#define CMD_802_11_SCAN 0x0006
#define CMD_802_11_GET_LOG 0x000b
#define CMD_MAC_MULTICAST_ADR 0x0010
#define CMD_802_11_AUTHENTICATE 0x0011
#define CMD_802_11_EEPROM_ACCESS 0x0059
#define CMD_802_11_ASSOCIATE 0x0050
#define CMD_802_11_SET_WEP 0x0013
#define CMD_802_11_GET_STAT 0x0014
#define CMD_802_3_GET_STAT 0x0015
#define CMD_802_11_SNMP_MIB 0x0016
#define CMD_MAC_REG_MAP 0x0017
#define CMD_BBP_REG_MAP 0x0018
#define CMD_MAC_REG_ACCESS 0x0019
#define CMD_BBP_REG_ACCESS 0x001a
#define CMD_RF_REG_ACCESS 0x001b
#define CMD_802_11_RADIO_CONTROL 0x001c
#define CMD_802_11_RF_CHANNEL 0x001d
#define CMD_802_11_RF_TX_POWER 0x001e
#define CMD_802_11_RSSI 0x001f
#define CMD_802_11_RF_ANTENNA 0x0020
#define CMD_802_11_PS_MODE 0x0021
#define CMD_802_11_DATA_RATE 0x0022
#define CMD_RF_REG_MAP 0x0023
#define CMD_802_11_DEAUTHENTICATE 0x0024
#define CMD_802_11_REASSOCIATE 0x0025
#define CMD_802_11_DISASSOCIATE 0x0026
#define CMD_MAC_CONTROL 0x0028
#define CMD_802_11_AD_HOC_START 0x002b
#define CMD_802_11_AD_HOC_JOIN 0x002c
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
#define CMD_802_11_ENABLE_RSN 0x002f
#define CMD_802_11_SET_AFC 0x003c
#define CMD_802_11_GET_AFC 0x003d
#define CMD_802_11_AD_HOC_STOP 0x0040
#define CMD_802_11_HOST_SLEEP_CFG 0x0043
#define CMD_802_11_WAKEUP_CONFIRM 0x0044
#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
#define CMD_802_11_BEACON_STOP 0x0049
#define CMD_802_11_MAC_ADDRESS 0x004d
#define CMD_802_11_LED_GPIO_CTRL 0x004e
#define CMD_802_11_EEPROM_ACCESS 0x0059
#define CMD_802_11_BAND_CONFIG 0x0058
#define CMD_802_11D_DOMAIN_INFO 0x005b
#define CMD_802_11_KEY_MATERIAL 0x005e
#define CMD_802_11_SLEEP_PARAMS 0x0066
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
#define CMD_802_11_SLEEP_PERIOD 0x0068
#define CMD_802_11_TPC_CFG 0x0072
#define CMD_802_11_FW_WAKE_METHOD 0x0074
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
#define CMD_802_11_TX_RATE_QUERY 0x007f
#define CMD_GET_TSF 0x0080
#define CMD_BT_ACCESS 0x0087
#define CMD_FWT_ACCESS 0x0095
#define CMD_802_11_MONITOR_MODE 0x0098
#define CMD_MESH_ACCESS 0x009b
#define CMD_MESH_CONFIG 0x00a3
#define CMD_SET_BOOT2_VER 0x00a5
#define CMD_802_11_BEACON_CTRL 0x00b0
/* For the IEEE Power Save */
#define CMD_SUBCMD_ENTER_PS 0x0030
#define CMD_SUBCMD_EXIT_PS 0x0031
#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
#define CMD_SUBCMD_FULL_POWERUP 0x0036
#define CMD_ENABLE_RSN 0x0001
#define CMD_DISABLE_RSN 0x0000
#define CMD_ACT_GET 0x0000
#define CMD_ACT_SET 0x0001
#define CMD_ACT_GET_AES 0x0002
#define CMD_ACT_SET_AES 0x0003
#define CMD_ACT_REMOVE_AES 0x0004
/* Define action or option for CMD_802_11_SET_WEP */
#define CMD_ACT_ADD 0x0002
#define CMD_ACT_REMOVE 0x0004
#define CMD_ACT_USE_DEFAULT 0x0008
#define CMD_TYPE_WEP_40_BIT 0x01
#define CMD_TYPE_WEP_104_BIT 0x02
#define CMD_NUM_OF_WEP_KEYS 4
#define CMD_WEP_KEY_INDEX_MASK 0x3fff
/* Define action or option for CMD_802_11_RESET */
#define CMD_ACT_HALT 0x0003
/* Define action or option for CMD_802_11_SCAN */
#define CMD_BSS_TYPE_BSS 0x0001
#define CMD_BSS_TYPE_IBSS 0x0002
#define CMD_BSS_TYPE_ANY 0x0003
/* Define action or option for CMD_802_11_SCAN */
#define CMD_SCAN_TYPE_ACTIVE 0x0000
#define CMD_SCAN_TYPE_PASSIVE 0x0001
#define CMD_SCAN_RADIO_TYPE_BG 0
#define CMD_SCAN_PROBE_DELAY_TIME 0
/* Define action or option for CMD_MAC_CONTROL */
#define CMD_ACT_MAC_RX_ON 0x0001
#define CMD_ACT_MAC_TX_ON 0x0002
#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
#define CMD_ACT_MAC_WEP_ENABLE 0x0008
#define CMD_ACT_MAC_INT_ENABLE 0x0010
#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
/* Define action or option for CMD_802_11_RADIO_CONTROL */
#define CMD_TYPE_AUTO_PREAMBLE 0x0001
#define CMD_TYPE_SHORT_PREAMBLE 0x0002
#define CMD_TYPE_LONG_PREAMBLE 0x0003
/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
#define CMD_SUBSCRIBE_SNR_LOW 0x0002
#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
#define CMD_SUBSCRIBE_BCNMISS 0x0008
#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
#define TURN_ON_RF 0x01
#define RADIO_ON 0x01
#define RADIO_OFF 0x00
#define SET_AUTO_PREAMBLE 0x05
#define SET_SHORT_PREAMBLE 0x03
#define SET_LONG_PREAMBLE 0x01
/* Define action or option for CMD_802_11_RF_CHANNEL */
#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
/* Define action or option for CMD_802_11_RF_TX_POWER */
#define CMD_ACT_TX_POWER_OPT_GET 0x0000
#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007
#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004
#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000
#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007
#define CMD_ACT_TX_POWER_INDEX_MID 0x0004
#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000
/* Define action or option for CMD_802_11_DATA_RATE */
#define CMD_ACT_SET_TX_AUTO 0x0000
#define CMD_ACT_SET_TX_FIX_RATE 0x0001
#define CMD_ACT_GET_TX_RATE 0x0002
#define CMD_ACT_SET_RX 0x0001
#define CMD_ACT_SET_TX 0x0002
#define CMD_ACT_SET_BOTH 0x0003
#define CMD_ACT_GET_RX 0x0004
#define CMD_ACT_GET_TX 0x0008
#define CMD_ACT_GET_BOTH 0x000c
/* Define action or option for CMD_802_11_PS_MODE */
#define CMD_TYPE_CAM 0x0000
#define CMD_TYPE_MAX_PSP 0x0001
#define CMD_TYPE_FAST_PSP 0x0002
/* Options for CMD_802_11_FW_WAKE_METHOD */
#define CMD_WAKE_METHOD_UNCHANGED 0x0000
#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
#define CMD_WAKE_METHOD_GPIO 0x0002
/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
/* The bt commands start at 5 instead of 1 because the old dft commands
* are mapped to 1-4. These old commands are no longer maintained and
* should not be called.
*/
CMD_ACT_BT_ACCESS_ADD = 5,
CMD_ACT_BT_ACCESS_DEL,
CMD_ACT_BT_ACCESS_LIST,
CMD_ACT_BT_ACCESS_RESET,
CMD_ACT_BT_ACCESS_SET_INVERT,
CMD_ACT_BT_ACCESS_GET_INVERT
};
/* Define action or option for CMD_FWT_ACCESS */
enum cmd_fwt_access_opts {
CMD_ACT_FWT_ACCESS_ADD = 1,
CMD_ACT_FWT_ACCESS_DEL,
CMD_ACT_FWT_ACCESS_LOOKUP,
CMD_ACT_FWT_ACCESS_LIST,
CMD_ACT_FWT_ACCESS_LIST_ROUTE,
CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
CMD_ACT_FWT_ACCESS_RESET,
CMD_ACT_FWT_ACCESS_CLEANUP,
CMD_ACT_FWT_ACCESS_TIME,
};
/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
CMD_ACT_MESH_GET_TTL = 1,
CMD_ACT_MESH_SET_TTL,
CMD_ACT_MESH_GET_STATS,
CMD_ACT_MESH_GET_ANYCAST,
CMD_ACT_MESH_SET_ANYCAST,
CMD_ACT_MESH_SET_LINK_COSTS,
CMD_ACT_MESH_GET_LINK_COSTS,
CMD_ACT_MESH_SET_BCAST_RATE,
CMD_ACT_MESH_GET_BCAST_RATE,
CMD_ACT_MESH_SET_RREQ_DELAY,
CMD_ACT_MESH_GET_RREQ_DELAY,
CMD_ACT_MESH_SET_ROUTE_EXP,
CMD_ACT_MESH_GET_ROUTE_EXP,
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
};
/* Define actions and types for CMD_MESH_CONFIG */
enum cmd_mesh_config_actions {
CMD_ACT_MESH_CONFIG_STOP = 0,
CMD_ACT_MESH_CONFIG_START,
CMD_ACT_MESH_CONFIG_SET,
CMD_ACT_MESH_CONFIG_GET,
};
enum cmd_mesh_config_types {
CMD_TYPE_MESH_SET_BOOTFLAG = 1,
CMD_TYPE_MESH_SET_BOOTTIME,
CMD_TYPE_MESH_SET_DEF_CHANNEL,
CMD_TYPE_MESH_SET_MESH_IE,
CMD_TYPE_MESH_GET_DEFAULTS,
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};
/** Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE 0
#define MACREG_INT_CODE_TX_DMA_DONE 1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
#define MACREG_INT_CODE_LINK_SENSED 4
#define MACREG_INT_CODE_CMD_FINISHED 5
#define MACREG_INT_CODE_MIB_CHANGED 6
#define MACREG_INT_CODE_INIT_DONE 7
#define MACREG_INT_CODE_DEAUTHENTICATED 8
#define MACREG_INT_CODE_DISASSOCIATED 9
#define MACREG_INT_CODE_PS_AWAKE 10
#define MACREG_INT_CODE_PS_SLEEP 11
#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
#define MACREG_INT_CODE_WM_AWAKE 15
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
#define MACREG_INT_CODE_HOST_AWAKE 18
#define MACREG_INT_CODE_STOP_TX 19
#define MACREG_INT_CODE_START_TX 20
#define MACREG_INT_CODE_CHANNEL_SWITCH 21
#define MACREG_INT_CODE_MEASUREMENT_RDY 22
#define MACREG_INT_CODE_WMM_CHANGE 23
#define MACREG_INT_CODE_BG_SCAN_REPORT 24
#define MACREG_INT_CODE_RSSI_LOW 25
#define MACREG_INT_CODE_SNR_LOW 26
#define MACREG_INT_CODE_MAX_FAIL 27
#define MACREG_INT_CODE_RSSI_HIGH 28
#define MACREG_INT_CODE_SNR_HIGH 29
#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
#define MACREG_INT_CODE_FIRMWARE_READY 48
#endif