| /* |
| * arch/sparc/kernel/irq.c: Interrupt request handling routines. On the |
| * Sparc the IRQs are basically 'cast in stone' |
| * and you are supposed to probe the prom's device |
| * node trees to find out who's got which IRQ. |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx) |
| * Copyright (C) 1995,2002 Pete A. Zaitcev (zaitcev@yahoo.com) |
| * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk) |
| * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/ptrace.h> |
| #include <linux/errno.h> |
| #include <linux/linkage.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/random.h> |
| #include <linux/init.h> |
| #include <linux/smp.h> |
| #include <linux/delay.h> |
| #include <linux/threads.h> |
| #include <linux/spinlock.h> |
| #include <linux/seq_file.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/processor.h> |
| #include <asm/system.h> |
| #include <asm/psr.h> |
| #include <asm/smp.h> |
| #include <asm/vaddrs.h> |
| #include <asm/timer.h> |
| #include <asm/openprom.h> |
| #include <asm/oplib.h> |
| #include <asm/traps.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/pgalloc.h> |
| #include <asm/pgtable.h> |
| #include <asm/pcic.h> |
| #include <asm/cacheflush.h> |
| #include <asm/irq_regs.h> |
| |
| #include "irq.h" |
| |
| #ifdef CONFIG_SMP |
| #define SMP_NOP2 "nop; nop;\n\t" |
| #define SMP_NOP3 "nop; nop; nop;\n\t" |
| #else |
| #define SMP_NOP2 |
| #define SMP_NOP3 |
| #endif /* SMP */ |
| unsigned long __raw_local_irq_save(void) |
| { |
| unsigned long retval; |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| "rd %%psr, %0\n\t" |
| SMP_NOP3 /* Sun4m + Cypress + SMP bug */ |
| "or %0, %2, %1\n\t" |
| "wr %1, 0, %%psr\n\t" |
| "nop; nop; nop\n" |
| : "=&r" (retval), "=r" (tmp) |
| : "i" (PSR_PIL) |
| : "memory"); |
| |
| return retval; |
| } |
| |
| void raw_local_irq_enable(void) |
| { |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| "rd %%psr, %0\n\t" |
| SMP_NOP3 /* Sun4m + Cypress + SMP bug */ |
| "andn %0, %1, %0\n\t" |
| "wr %0, 0, %%psr\n\t" |
| "nop; nop; nop\n" |
| : "=&r" (tmp) |
| : "i" (PSR_PIL) |
| : "memory"); |
| } |
| |
| void raw_local_irq_restore(unsigned long old_psr) |
| { |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| "rd %%psr, %0\n\t" |
| "and %2, %1, %2\n\t" |
| SMP_NOP2 /* Sun4m + Cypress + SMP bug */ |
| "andn %0, %1, %0\n\t" |
| "wr %0, %2, %%psr\n\t" |
| "nop; nop; nop\n" |
| : "=&r" (tmp) |
| : "i" (PSR_PIL), "r" (old_psr) |
| : "memory"); |
| } |
| |
| EXPORT_SYMBOL(__raw_local_irq_save); |
| EXPORT_SYMBOL(raw_local_irq_enable); |
| EXPORT_SYMBOL(raw_local_irq_restore); |
| |
| /* |
| * Dave Redman (djhr@tadpole.co.uk) |
| * |
| * IRQ numbers.. These are no longer restricted to 15.. |
| * |
| * this is done to enable SBUS cards and onboard IO to be masked |
| * correctly. using the interrupt level isn't good enough. |
| * |
| * For example: |
| * A device interrupting at sbus level6 and the Floppy both come in |
| * at IRQ11, but enabling and disabling them requires writing to |
| * different bits in the SLAVIO/SEC. |
| * |
| * As a result of these changes sun4m machines could now support |
| * directed CPU interrupts using the existing enable/disable irq code |
| * with tweaks. |
| * |
| */ |
| |
| static void irq_panic(void) |
| { |
| extern char *cputypval; |
| prom_printf("machine: %s doesn't have irq handlers defined!\n",cputypval); |
| prom_halt(); |
| } |
| |
| void (*sparc_init_timers)(irq_handler_t ) = |
| (void (*)(irq_handler_t )) irq_panic; |
| |
| /* |
| * Dave Redman (djhr@tadpole.co.uk) |
| * |
| * There used to be extern calls and hard coded values here.. very sucky! |
| * instead, because some of the devices attach very early, I do something |
| * equally sucky but at least we'll never try to free statically allocated |
| * space or call kmalloc before kmalloc_init :(. |
| * |
| * In fact it's the timer10 that attaches first.. then timer14 |
| * then kmalloc_init is called.. then the tty interrupts attach. |
| * hmmm.... |
| * |
| */ |
| #define MAX_STATIC_ALLOC 4 |
| struct irqaction static_irqaction[MAX_STATIC_ALLOC]; |
| int static_irq_count; |
| |
| static struct { |
| struct irqaction *action; |
| int flags; |
| } sparc_irq[NR_IRQS]; |
| #define SPARC_IRQ_INPROGRESS 1 |
| |
| /* Used to protect the IRQ action lists */ |
| DEFINE_SPINLOCK(irq_action_lock); |
| |
| int show_interrupts(struct seq_file *p, void *v) |
| { |
| int i = *(loff_t *) v; |
| struct irqaction * action; |
| unsigned long flags; |
| #ifdef CONFIG_SMP |
| int j; |
| #endif |
| |
| if (sparc_cpu_model == sun4d) { |
| extern int show_sun4d_interrupts(struct seq_file *, void *); |
| |
| return show_sun4d_interrupts(p, v); |
| } |
| spin_lock_irqsave(&irq_action_lock, flags); |
| if (i < NR_IRQS) { |
| action = sparc_irq[i].action; |
| if (!action) |
| goto out_unlock; |
| seq_printf(p, "%3d: ", i); |
| #ifndef CONFIG_SMP |
| seq_printf(p, "%10u ", kstat_irqs(i)); |
| #else |
| for_each_online_cpu(j) { |
| seq_printf(p, "%10u ", |
| kstat_cpu(j).irqs[i]); |
| } |
| #endif |
| seq_printf(p, " %c %s", |
| (action->flags & IRQF_DISABLED) ? '+' : ' ', |
| action->name); |
| for (action=action->next; action; action = action->next) { |
| seq_printf(p, ",%s %s", |
| (action->flags & IRQF_DISABLED) ? " +" : "", |
| action->name); |
| } |
| seq_putc(p, '\n'); |
| } |
| out_unlock: |
| spin_unlock_irqrestore(&irq_action_lock, flags); |
| return 0; |
| } |
| |
| void free_irq(unsigned int irq, void *dev_id) |
| { |
| struct irqaction * action; |
| struct irqaction **actionp; |
| unsigned long flags; |
| unsigned int cpu_irq; |
| |
| if (sparc_cpu_model == sun4d) { |
| extern void sun4d_free_irq(unsigned int, void *); |
| |
| sun4d_free_irq(irq, dev_id); |
| return; |
| } |
| cpu_irq = irq & (NR_IRQS - 1); |
| if (cpu_irq > 14) { /* 14 irq levels on the sparc */ |
| printk("Trying to free bogus IRQ %d\n", irq); |
| return; |
| } |
| |
| spin_lock_irqsave(&irq_action_lock, flags); |
| |
| actionp = &sparc_irq[cpu_irq].action; |
| action = *actionp; |
| |
| if (!action->handler) { |
| printk("Trying to free free IRQ%d\n",irq); |
| goto out_unlock; |
| } |
| if (dev_id) { |
| for (; action; action = action->next) { |
| if (action->dev_id == dev_id) |
| break; |
| actionp = &action->next; |
| } |
| if (!action) { |
| printk("Trying to free free shared IRQ%d\n",irq); |
| goto out_unlock; |
| } |
| } else if (action->flags & IRQF_SHARED) { |
| printk("Trying to free shared IRQ%d with NULL device ID\n", irq); |
| goto out_unlock; |
| } |
| if (action->flags & SA_STATIC_ALLOC) |
| { |
| /* This interrupt is marked as specially allocated |
| * so it is a bad idea to free it. |
| */ |
| printk("Attempt to free statically allocated IRQ%d (%s)\n", |
| irq, action->name); |
| goto out_unlock; |
| } |
| |
| *actionp = action->next; |
| |
| spin_unlock_irqrestore(&irq_action_lock, flags); |
| |
| synchronize_irq(irq); |
| |
| spin_lock_irqsave(&irq_action_lock, flags); |
| |
| kfree(action); |
| |
| if (!sparc_irq[cpu_irq].action) |
| __disable_irq(irq); |
| |
| out_unlock: |
| spin_unlock_irqrestore(&irq_action_lock, flags); |
| } |
| |
| EXPORT_SYMBOL(free_irq); |
| |
| /* |
| * This is called when we want to synchronize with |
| * interrupts. We may for example tell a device to |
| * stop sending interrupts: but to make sure there |
| * are no interrupts that are executing on another |
| * CPU we need to call this function. |
| */ |
| #ifdef CONFIG_SMP |
| void synchronize_irq(unsigned int irq) |
| { |
| unsigned int cpu_irq; |
| |
| cpu_irq = irq & (NR_IRQS - 1); |
| while (sparc_irq[cpu_irq].flags & SPARC_IRQ_INPROGRESS) |
| cpu_relax(); |
| } |
| #endif /* SMP */ |
| |
| void unexpected_irq(int irq, void *dev_id, struct pt_regs * regs) |
| { |
| int i; |
| struct irqaction * action; |
| unsigned int cpu_irq; |
| |
| cpu_irq = irq & (NR_IRQS - 1); |
| action = sparc_irq[cpu_irq].action; |
| |
| printk("IO device interrupt, irq = %d\n", irq); |
| printk("PC = %08lx NPC = %08lx FP=%08lx\n", regs->pc, |
| regs->npc, regs->u_regs[14]); |
| if (action) { |
| printk("Expecting: "); |
| for (i = 0; i < 16; i++) |
| if (action->handler) |
| printk("[%s:%d:0x%x] ", action->name, |
| (int) i, (unsigned int) action->handler); |
| } |
| printk("AIEEE\n"); |
| panic("bogus interrupt received"); |
| } |
| |
| void handler_irq(int irq, struct pt_regs * regs) |
| { |
| struct pt_regs *old_regs; |
| struct irqaction * action; |
| int cpu = smp_processor_id(); |
| #ifdef CONFIG_SMP |
| extern void smp4m_irq_rotate(int cpu); |
| #endif |
| |
| old_regs = set_irq_regs(regs); |
| irq_enter(); |
| disable_pil_irq(irq); |
| #ifdef CONFIG_SMP |
| /* Only rotate on lower priority IRQs (scsi, ethernet, etc.). */ |
| if((sparc_cpu_model==sun4m) && (irq < 10)) |
| smp4m_irq_rotate(cpu); |
| #endif |
| action = sparc_irq[irq].action; |
| sparc_irq[irq].flags |= SPARC_IRQ_INPROGRESS; |
| kstat_cpu(cpu).irqs[irq]++; |
| do { |
| if (!action || !action->handler) |
| unexpected_irq(irq, NULL, regs); |
| action->handler(irq, action->dev_id); |
| action = action->next; |
| } while (action); |
| sparc_irq[irq].flags &= ~SPARC_IRQ_INPROGRESS; |
| enable_pil_irq(irq); |
| irq_exit(); |
| set_irq_regs(old_regs); |
| } |
| |
| #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE) |
| |
| /* Fast IRQs on the Sparc can only have one routine attached to them, |
| * thus no sharing possible. |
| */ |
| static int request_fast_irq(unsigned int irq, |
| void (*handler)(void), |
| unsigned long irqflags, const char *devname) |
| { |
| struct irqaction *action; |
| unsigned long flags; |
| unsigned int cpu_irq; |
| int ret; |
| #ifdef CONFIG_SMP |
| struct tt_entry *trap_table; |
| extern struct tt_entry trapbase_cpu1, trapbase_cpu2, trapbase_cpu3; |
| #endif |
| |
| cpu_irq = irq & (NR_IRQS - 1); |
| if(cpu_irq > 14) { |
| ret = -EINVAL; |
| goto out; |
| } |
| if(!handler) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| spin_lock_irqsave(&irq_action_lock, flags); |
| |
| action = sparc_irq[cpu_irq].action; |
| if(action) { |
| if(action->flags & IRQF_SHARED) |
| panic("Trying to register fast irq when already shared.\n"); |
| if(irqflags & IRQF_SHARED) |
| panic("Trying to register fast irq as shared.\n"); |
| |
| /* Anyway, someone already owns it so cannot be made fast. */ |
| printk("request_fast_irq: Trying to register yet already owned.\n"); |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| |
| /* If this is flagged as statically allocated then we use our |
| * private struct which is never freed. |
| */ |
| if (irqflags & SA_STATIC_ALLOC) { |
| if (static_irq_count < MAX_STATIC_ALLOC) |
| action = &static_irqaction[static_irq_count++]; |
| else |
| printk("Fast IRQ%d (%s) SA_STATIC_ALLOC failed using kmalloc\n", |
| irq, devname); |
| } |
| |
| if (action == NULL) |
| action = kmalloc(sizeof(struct irqaction), |
| GFP_ATOMIC); |
| |
| if (!action) { |
| ret = -ENOMEM; |
| goto out_unlock; |
| } |
| |
| /* Dork with trap table if we get this far. */ |
| #define INSTANTIATE(table) \ |
| table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_one = SPARC_RD_PSR_L0; \ |
| table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two = \ |
| SPARC_BRANCH((unsigned long) handler, \ |
| (unsigned long) &table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two);\ |
| table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_three = SPARC_RD_WIM_L3; \ |
| table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_four = SPARC_NOP; |
| |
| INSTANTIATE(sparc_ttable) |
| #ifdef CONFIG_SMP |
| trap_table = &trapbase_cpu1; INSTANTIATE(trap_table) |
| trap_table = &trapbase_cpu2; INSTANTIATE(trap_table) |
| trap_table = &trapbase_cpu3; INSTANTIATE(trap_table) |
| #endif |
| #undef INSTANTIATE |
| /* |
| * XXX Correct thing whould be to flush only I- and D-cache lines |
| * which contain the handler in question. But as of time of the |
| * writing we have no CPU-neutral interface to fine-grained flushes. |
| */ |
| flush_cache_all(); |
| |
| action->flags = irqflags; |
| cpus_clear(action->mask); |
| action->name = devname; |
| action->dev_id = NULL; |
| action->next = NULL; |
| |
| sparc_irq[cpu_irq].action = action; |
| |
| __enable_irq(irq); |
| |
| ret = 0; |
| out_unlock: |
| spin_unlock_irqrestore(&irq_action_lock, flags); |
| out: |
| return ret; |
| } |
| |
| /* These variables are used to access state from the assembler |
| * interrupt handler, floppy_hardint, so we cannot put these in |
| * the floppy driver image because that would not work in the |
| * modular case. |
| */ |
| volatile unsigned char *fdc_status; |
| EXPORT_SYMBOL(fdc_status); |
| |
| char *pdma_vaddr; |
| EXPORT_SYMBOL(pdma_vaddr); |
| |
| unsigned long pdma_size; |
| EXPORT_SYMBOL(pdma_size); |
| |
| volatile int doing_pdma; |
| EXPORT_SYMBOL(doing_pdma); |
| |
| char *pdma_base; |
| EXPORT_SYMBOL(pdma_base); |
| |
| unsigned long pdma_areasize; |
| EXPORT_SYMBOL(pdma_areasize); |
| |
| extern void floppy_hardint(void); |
| |
| static irq_handler_t floppy_irq_handler; |
| |
| void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs; |
| int cpu = smp_processor_id(); |
| |
| old_regs = set_irq_regs(regs); |
| disable_pil_irq(irq); |
| irq_enter(); |
| kstat_cpu(cpu).irqs[irq]++; |
| floppy_irq_handler(irq, dev_id); |
| irq_exit(); |
| enable_pil_irq(irq); |
| set_irq_regs(old_regs); |
| // XXX Eek, it's totally changed with preempt_count() and such |
| // if (softirq_pending(cpu)) |
| // do_softirq(); |
| } |
| |
| int sparc_floppy_request_irq(int irq, unsigned long flags, |
| irq_handler_t irq_handler) |
| { |
| floppy_irq_handler = irq_handler; |
| return request_fast_irq(irq, floppy_hardint, flags, "floppy"); |
| } |
| EXPORT_SYMBOL(sparc_floppy_request_irq); |
| |
| #endif |
| |
| int request_irq(unsigned int irq, |
| irq_handler_t handler, |
| unsigned long irqflags, const char * devname, void *dev_id) |
| { |
| struct irqaction * action, **actionp; |
| unsigned long flags; |
| unsigned int cpu_irq; |
| int ret; |
| |
| if (sparc_cpu_model == sun4d) { |
| extern int sun4d_request_irq(unsigned int, |
| irq_handler_t , |
| unsigned long, const char *, void *); |
| return sun4d_request_irq(irq, handler, irqflags, devname, dev_id); |
| } |
| cpu_irq = irq & (NR_IRQS - 1); |
| if(cpu_irq > 14) { |
| ret = -EINVAL; |
| goto out; |
| } |
| if (!handler) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| spin_lock_irqsave(&irq_action_lock, flags); |
| |
| actionp = &sparc_irq[cpu_irq].action; |
| action = *actionp; |
| if (action) { |
| if (!(action->flags & IRQF_SHARED) || !(irqflags & IRQF_SHARED)) { |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| if ((action->flags & IRQF_DISABLED) != (irqflags & IRQF_DISABLED)) { |
| printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq); |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| for ( ; action; action = *actionp) |
| actionp = &action->next; |
| } |
| |
| /* If this is flagged as statically allocated then we use our |
| * private struct which is never freed. |
| */ |
| if (irqflags & SA_STATIC_ALLOC) { |
| if (static_irq_count < MAX_STATIC_ALLOC) |
| action = &static_irqaction[static_irq_count++]; |
| else |
| printk("Request for IRQ%d (%s) SA_STATIC_ALLOC failed using kmalloc\n", irq, devname); |
| } |
| |
| if (action == NULL) |
| action = kmalloc(sizeof(struct irqaction), |
| GFP_ATOMIC); |
| |
| if (!action) { |
| ret = -ENOMEM; |
| goto out_unlock; |
| } |
| |
| action->handler = handler; |
| action->flags = irqflags; |
| cpus_clear(action->mask); |
| action->name = devname; |
| action->next = NULL; |
| action->dev_id = dev_id; |
| |
| *actionp = action; |
| |
| __enable_irq(irq); |
| |
| ret = 0; |
| out_unlock: |
| spin_unlock_irqrestore(&irq_action_lock, flags); |
| out: |
| return ret; |
| } |
| |
| EXPORT_SYMBOL(request_irq); |
| |
| void disable_irq_nosync(unsigned int irq) |
| { |
| return __disable_irq(irq); |
| } |
| EXPORT_SYMBOL(disable_irq_nosync); |
| |
| void disable_irq(unsigned int irq) |
| { |
| return __disable_irq(irq); |
| } |
| EXPORT_SYMBOL(disable_irq); |
| |
| void enable_irq(unsigned int irq) |
| { |
| return __enable_irq(irq); |
| } |
| |
| EXPORT_SYMBOL(enable_irq); |
| |
| /* We really don't need these at all on the Sparc. We only have |
| * stubs here because they are exported to modules. |
| */ |
| unsigned long probe_irq_on(void) |
| { |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(probe_irq_on); |
| |
| int probe_irq_off(unsigned long mask) |
| { |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(probe_irq_off); |
| |
| /* djhr |
| * This could probably be made indirect too and assigned in the CPU |
| * bits of the code. That would be much nicer I think and would also |
| * fit in with the idea of being able to tune your kernel for your machine |
| * by removing unrequired machine and device support. |
| * |
| */ |
| |
| void __init init_IRQ(void) |
| { |
| extern void sun4c_init_IRQ( void ); |
| extern void sun4m_init_IRQ( void ); |
| extern void sun4d_init_IRQ( void ); |
| |
| switch(sparc_cpu_model) { |
| case sun4c: |
| case sun4: |
| sun4c_init_IRQ(); |
| break; |
| |
| case sun4m: |
| #ifdef CONFIG_PCI |
| pcic_probe(); |
| if (pcic_present()) { |
| sun4m_pci_init_IRQ(); |
| break; |
| } |
| #endif |
| sun4m_init_IRQ(); |
| break; |
| |
| case sun4d: |
| sun4d_init_IRQ(); |
| break; |
| |
| default: |
| prom_printf("Cannot initialize IRQs on this Sun machine..."); |
| break; |
| } |
| btfixup(); |
| } |
| |
| void init_irq_proc(void) |
| { |
| /* For now, nothing... */ |
| } |