| /* DVB USB compliant linux driver for Conexant USB reference design. |
| * |
| * The Conexant reference design I saw on their website was only for analogue |
| * capturing (using the cx25842). The box I took to write this driver (reverse |
| * engineered) is the one labeled Medion MD95700. In addition to the cx25842 |
| * for analogue capturing it also has a cx22702 DVB-T demodulator on the main |
| * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. |
| * |
| * Maybe it is a little bit premature to call this driver cxusb, but I assume |
| * the USB protocol is identical or at least inherited from the reference |
| * design, so it can be reused for the "analogue-only" device (if it will |
| * appear at all). |
| * |
| * TODO: Use the cx25840-driver for the analogue part |
| * |
| * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) |
| * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org) |
| * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include <media/tuner.h> |
| #include <linux/vmalloc.h> |
| |
| #include "cxusb.h" |
| |
| #include "cx22702.h" |
| #include "lgdt330x.h" |
| #include "mt352.h" |
| #include "mt352_priv.h" |
| #include "zl10353.h" |
| #include "tuner-xc2028.h" |
| #include "tuner-simple.h" |
| #include "mxl5005s.h" |
| #include "dib7000p.h" |
| #include "dib0070.h" |
| #include "lgs8gxx.h" |
| |
| /* debug */ |
| static int dvb_usb_cxusb_debug; |
| module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define deb_info(args...) dprintk(dvb_usb_cxusb_debug, 0x03, args) |
| #define deb_i2c(args...) dprintk(dvb_usb_cxusb_debug, 0x02, args) |
| |
| static int cxusb_ctrl_msg(struct dvb_usb_device *d, |
| u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) |
| { |
| int wo = (rbuf == NULL || rlen == 0); /* write-only */ |
| u8 sndbuf[1+wlen]; |
| memset(sndbuf, 0, 1+wlen); |
| |
| sndbuf[0] = cmd; |
| memcpy(&sndbuf[1], wbuf, wlen); |
| if (wo) |
| return dvb_usb_generic_write(d, sndbuf, 1+wlen); |
| else |
| return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); |
| } |
| |
| /* GPIO */ |
| static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) |
| { |
| struct cxusb_state *st = d->priv; |
| u8 o[2], i; |
| |
| if (st->gpio_write_state[GPIO_TUNER] == onoff) |
| return; |
| |
| o[0] = GPIO_TUNER; |
| o[1] = onoff; |
| cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); |
| |
| if (i != 0x01) |
| deb_info("gpio_write failed.\n"); |
| |
| st->gpio_write_state[GPIO_TUNER] = onoff; |
| } |
| |
| static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask, |
| u8 newval) |
| { |
| u8 o[2], gpio_state; |
| int rc; |
| |
| o[0] = 0xff & ~changemask; /* mask of bits to keep */ |
| o[1] = newval & changemask; /* new values for bits */ |
| |
| rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1); |
| if (rc < 0 || (gpio_state & changemask) != (newval & changemask)) |
| deb_info("bluebird_gpio_write failed.\n"); |
| |
| return rc < 0 ? rc : gpio_state; |
| } |
| |
| static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low) |
| { |
| cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin); |
| msleep(5); |
| cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0); |
| } |
| |
| static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) |
| { |
| cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); |
| } |
| |
| static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, |
| u8 addr, int onoff) |
| { |
| u8 o[2] = {addr, onoff}; |
| u8 i; |
| int rc; |
| |
| rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); |
| |
| if (rc < 0) |
| return rc; |
| if (i == 0x01) |
| return 0; |
| else { |
| deb_info("gpio_write failed.\n"); |
| return -EIO; |
| } |
| } |
| |
| /* I2C */ |
| static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (i = 0; i < num; i++) { |
| |
| if (d->udev->descriptor.idVendor == USB_VID_MEDION) |
| switch (msg[i].addr) { |
| case 0x63: |
| cxusb_gpio_tuner(d, 0); |
| break; |
| default: |
| cxusb_gpio_tuner(d, 1); |
| break; |
| } |
| |
| if (msg[i].flags & I2C_M_RD) { |
| /* read only */ |
| u8 obuf[3], ibuf[1+msg[i].len]; |
| obuf[0] = 0; |
| obuf[1] = msg[i].len; |
| obuf[2] = msg[i].addr; |
| if (cxusb_ctrl_msg(d, CMD_I2C_READ, |
| obuf, 3, |
| ibuf, 1+msg[i].len) < 0) { |
| warn("i2c read failed"); |
| break; |
| } |
| memcpy(msg[i].buf, &ibuf[1], msg[i].len); |
| } else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) && |
| msg[i].addr == msg[i+1].addr) { |
| /* write to then read from same address */ |
| u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; |
| obuf[0] = msg[i].len; |
| obuf[1] = msg[i+1].len; |
| obuf[2] = msg[i].addr; |
| memcpy(&obuf[3], msg[i].buf, msg[i].len); |
| |
| if (cxusb_ctrl_msg(d, CMD_I2C_READ, |
| obuf, 3+msg[i].len, |
| ibuf, 1+msg[i+1].len) < 0) |
| break; |
| |
| if (ibuf[0] != 0x08) |
| deb_i2c("i2c read may have failed\n"); |
| |
| memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len); |
| |
| i++; |
| } else { |
| /* write only */ |
| u8 obuf[2+msg[i].len], ibuf; |
| obuf[0] = msg[i].addr; |
| obuf[1] = msg[i].len; |
| memcpy(&obuf[2], msg[i].buf, msg[i].len); |
| |
| if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf, |
| 2+msg[i].len, &ibuf,1) < 0) |
| break; |
| if (ibuf != 0x08) |
| deb_i2c("i2c write may have failed\n"); |
| } |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return i == num ? num : -EREMOTEIO; |
| } |
| |
| static u32 cxusb_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm cxusb_i2c_algo = { |
| .master_xfer = cxusb_i2c_xfer, |
| .functionality = cxusb_i2c_func, |
| }; |
| |
| static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| u8 b = 0; |
| if (onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); |
| else |
| return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); |
| } |
| |
| static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| if (!onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0); |
| if (d->state == DVB_USB_STATE_INIT && |
| usb_set_interface(d->udev, 0, 0) < 0) |
| err("set interface failed"); |
| do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && |
| !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && |
| !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); |
| if (!ret) { |
| /* FIXME: We don't know why, but we need to configure the |
| * lgdt3303 with the register settings below on resume */ |
| int i; |
| u8 buf, bufs[] = { |
| 0x0e, 0x2, 0x00, 0x7f, |
| 0x0e, 0x2, 0x02, 0xfe, |
| 0x0e, 0x2, 0x02, 0x01, |
| 0x0e, 0x2, 0x00, 0x03, |
| 0x0e, 0x2, 0x0d, 0x40, |
| 0x0e, 0x2, 0x0e, 0x87, |
| 0x0e, 0x2, 0x0f, 0x8e, |
| 0x0e, 0x2, 0x10, 0x01, |
| 0x0e, 0x2, 0x14, 0xd7, |
| 0x0e, 0x2, 0x47, 0x88, |
| }; |
| msleep(20); |
| for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) { |
| ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE, |
| bufs+i, 4, &buf, 1); |
| if (ret) |
| break; |
| if (buf != 0x8) |
| return -EREMOTEIO; |
| } |
| } |
| return ret; |
| } |
| |
| static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| u8 b = 0; |
| if (onoff) |
| return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); |
| else |
| return 0; |
| } |
| |
| static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int rc = 0; |
| |
| rc = cxusb_power_ctrl(d, onoff); |
| if (!onoff) |
| cxusb_nano2_led(d, 0); |
| |
| return rc; |
| } |
| |
| static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| u8 b; |
| ret = cxusb_power_ctrl(d, onoff); |
| if (!onoff) |
| return ret; |
| |
| msleep(128); |
| cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); |
| msleep(100); |
| return ret; |
| } |
| |
| static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) |
| { |
| u8 buf[2] = { 0x03, 0x00 }; |
| if (onoff) |
| cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, buf, 2, NULL, 0); |
| else |
| cxusb_ctrl_msg(adap->dev, CMD_STREAMING_OFF, NULL, 0, NULL, 0); |
| |
| return 0; |
| } |
| |
| static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) |
| { |
| if (onoff) |
| cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0); |
| else |
| cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF, |
| NULL, 0, NULL, 0); |
| return 0; |
| } |
| |
| static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) |
| { |
| int ep = d->props.generic_bulk_ctrl_endpoint; |
| const int timeout = 100; |
| const int junk_len = 32; |
| u8 *junk; |
| int rd_count; |
| |
| /* Discard remaining data in video pipe */ |
| junk = kmalloc(junk_len, GFP_KERNEL); |
| if (!junk) |
| return; |
| while (1) { |
| if (usb_bulk_msg(d->udev, |
| usb_rcvbulkpipe(d->udev, ep), |
| junk, junk_len, &rd_count, timeout) < 0) |
| break; |
| if (!rd_count) |
| break; |
| } |
| kfree(junk); |
| } |
| |
| static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) |
| { |
| struct usb_data_stream_properties *p = &d->props.adapter[0].stream; |
| const int timeout = 100; |
| const int junk_len = p->u.bulk.buffersize; |
| u8 *junk; |
| int rd_count; |
| |
| /* Discard remaining data in video pipe */ |
| junk = kmalloc(junk_len, GFP_KERNEL); |
| if (!junk) |
| return; |
| while (1) { |
| if (usb_bulk_msg(d->udev, |
| usb_rcvbulkpipe(d->udev, p->endpoint), |
| junk, junk_len, &rd_count, timeout) < 0) |
| break; |
| if (!rd_count) |
| break; |
| } |
| kfree(junk); |
| } |
| |
| static int cxusb_d680_dmb_streaming_ctrl( |
| struct dvb_usb_adapter *adap, int onoff) |
| { |
| if (onoff) { |
| u8 buf[2] = { 0x03, 0x00 }; |
| cxusb_d680_dmb_drain_video(adap->dev); |
| return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, |
| buf, sizeof(buf), NULL, 0); |
| } else { |
| int ret = cxusb_ctrl_msg(adap->dev, |
| CMD_STREAMING_OFF, NULL, 0, NULL, 0); |
| return ret; |
| } |
| } |
| |
| static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| u8 ircode[4]; |
| int i; |
| |
| cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); |
| |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (rc5_custom(&keymap[i]) == ircode[2] && |
| rc5_data(&keymap[i]) == ircode[3]) { |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, |
| int *state) |
| { |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| u8 ircode[4]; |
| int i; |
| struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, |
| .buf = ircode, .len = 4 }; |
| |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1) |
| return 0; |
| |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (rc5_custom(&keymap[i]) == ircode[1] && |
| rc5_data(&keymap[i]) == ircode[2]) { |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, |
| int *state) |
| { |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| u8 ircode[2]; |
| int i; |
| |
| *event = 0; |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) |
| return 0; |
| |
| for (i = 0; i < d->props.rc_key_map_size; i++) { |
| if (rc5_custom(&keymap[i]) == ircode[0] && |
| rc5_data(&keymap[i]) == ircode[1]) { |
| *event = keymap[i].event; |
| *state = REMOTE_KEY_PRESSED; |
| |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct dvb_usb_rc_key dvico_mce_rc_keys[] = { |
| { 0xfe02, KEY_TV }, |
| { 0xfe0e, KEY_MP3 }, |
| { 0xfe1a, KEY_DVD }, |
| { 0xfe1e, KEY_FAVORITES }, |
| { 0xfe16, KEY_SETUP }, |
| { 0xfe46, KEY_POWER2 }, |
| { 0xfe0a, KEY_EPG }, |
| { 0xfe49, KEY_BACK }, |
| { 0xfe4d, KEY_MENU }, |
| { 0xfe51, KEY_UP }, |
| { 0xfe5b, KEY_LEFT }, |
| { 0xfe5f, KEY_RIGHT }, |
| { 0xfe53, KEY_DOWN }, |
| { 0xfe5e, KEY_OK }, |
| { 0xfe59, KEY_INFO }, |
| { 0xfe55, KEY_TAB }, |
| { 0xfe0f, KEY_PREVIOUSSONG },/* Replay */ |
| { 0xfe12, KEY_NEXTSONG }, /* Skip */ |
| { 0xfe42, KEY_ENTER }, /* Windows/Start */ |
| { 0xfe15, KEY_VOLUMEUP }, |
| { 0xfe05, KEY_VOLUMEDOWN }, |
| { 0xfe11, KEY_CHANNELUP }, |
| { 0xfe09, KEY_CHANNELDOWN }, |
| { 0xfe52, KEY_CAMERA }, |
| { 0xfe5a, KEY_TUNER }, /* Live */ |
| { 0xfe19, KEY_OPEN }, |
| { 0xfe0b, KEY_1 }, |
| { 0xfe17, KEY_2 }, |
| { 0xfe1b, KEY_3 }, |
| { 0xfe07, KEY_4 }, |
| { 0xfe50, KEY_5 }, |
| { 0xfe54, KEY_6 }, |
| { 0xfe48, KEY_7 }, |
| { 0xfe4c, KEY_8 }, |
| { 0xfe58, KEY_9 }, |
| { 0xfe13, KEY_ANGLE }, /* Aspect */ |
| { 0xfe03, KEY_0 }, |
| { 0xfe1f, KEY_ZOOM }, |
| { 0xfe43, KEY_REWIND }, |
| { 0xfe47, KEY_PLAYPAUSE }, |
| { 0xfe4f, KEY_FASTFORWARD }, |
| { 0xfe57, KEY_MUTE }, |
| { 0xfe0d, KEY_STOP }, |
| { 0xfe01, KEY_RECORD }, |
| { 0xfe4e, KEY_POWER }, |
| }; |
| |
| static struct dvb_usb_rc_key dvico_portable_rc_keys[] = { |
| { 0xfc02, KEY_SETUP }, /* Profile */ |
| { 0xfc43, KEY_POWER2 }, |
| { 0xfc06, KEY_EPG }, |
| { 0xfc5a, KEY_BACK }, |
| { 0xfc05, KEY_MENU }, |
| { 0xfc47, KEY_INFO }, |
| { 0xfc01, KEY_TAB }, |
| { 0xfc42, KEY_PREVIOUSSONG },/* Replay */ |
| { 0xfc49, KEY_VOLUMEUP }, |
| { 0xfc09, KEY_VOLUMEDOWN }, |
| { 0xfc54, KEY_CHANNELUP }, |
| { 0xfc0b, KEY_CHANNELDOWN }, |
| { 0xfc16, KEY_CAMERA }, |
| { 0xfc40, KEY_TUNER }, /* ATV/DTV */ |
| { 0xfc45, KEY_OPEN }, |
| { 0xfc19, KEY_1 }, |
| { 0xfc18, KEY_2 }, |
| { 0xfc1b, KEY_3 }, |
| { 0xfc1a, KEY_4 }, |
| { 0xfc58, KEY_5 }, |
| { 0xfc59, KEY_6 }, |
| { 0xfc15, KEY_7 }, |
| { 0xfc14, KEY_8 }, |
| { 0xfc17, KEY_9 }, |
| { 0xfc44, KEY_ANGLE }, /* Aspect */ |
| { 0xfc55, KEY_0 }, |
| { 0xfc07, KEY_ZOOM }, |
| { 0xfc0a, KEY_REWIND }, |
| { 0xfc08, KEY_PLAYPAUSE }, |
| { 0xfc4b, KEY_FASTFORWARD }, |
| { 0xfc5b, KEY_MUTE }, |
| { 0xfc04, KEY_STOP }, |
| { 0xfc56, KEY_RECORD }, |
| { 0xfc57, KEY_POWER }, |
| { 0xfc41, KEY_UNKNOWN }, /* INPUT */ |
| { 0xfc00, KEY_UNKNOWN }, /* HD */ |
| }; |
| |
| static struct dvb_usb_rc_key d680_dmb_rc_keys[] = { |
| { 0x0038, KEY_UNKNOWN }, /* TV/AV */ |
| { 0x080c, KEY_ZOOM }, |
| { 0x0800, KEY_0 }, |
| { 0x0001, KEY_1 }, |
| { 0x0802, KEY_2 }, |
| { 0x0003, KEY_3 }, |
| { 0x0804, KEY_4 }, |
| { 0x0005, KEY_5 }, |
| { 0x0806, KEY_6 }, |
| { 0x0007, KEY_7 }, |
| { 0x0808, KEY_8 }, |
| { 0x0009, KEY_9 }, |
| { 0x000a, KEY_MUTE }, |
| { 0x0829, KEY_BACK }, |
| { 0x0012, KEY_CHANNELUP }, |
| { 0x0813, KEY_CHANNELDOWN }, |
| { 0x002b, KEY_VOLUMEUP }, |
| { 0x082c, KEY_VOLUMEDOWN }, |
| { 0x0020, KEY_UP }, |
| { 0x0821, KEY_DOWN }, |
| { 0x0011, KEY_LEFT }, |
| { 0x0810, KEY_RIGHT }, |
| { 0x000d, KEY_OK }, |
| { 0x081f, KEY_RECORD }, |
| { 0x0017, KEY_PLAYPAUSE }, |
| { 0x0816, KEY_PLAYPAUSE }, |
| { 0x000b, KEY_STOP }, |
| { 0x0827, KEY_FASTFORWARD }, |
| { 0x0026, KEY_REWIND }, |
| { 0x081e, KEY_UNKNOWN }, /* Time Shift */ |
| { 0x000e, KEY_UNKNOWN }, /* Snapshot */ |
| { 0x082d, KEY_UNKNOWN }, /* Mouse Cursor */ |
| { 0x000f, KEY_UNKNOWN }, /* Minimize/Maximize */ |
| { 0x0814, KEY_UNKNOWN }, /* Shuffle */ |
| { 0x0025, KEY_POWER }, |
| }; |
| |
| static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) |
| { |
| static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; |
| static u8 reset [] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; |
| static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| |
| return 0; |
| } |
| |
| static int cxusb_mt352_demod_init(struct dvb_frontend* fe) |
| { /* used in both lgz201 and th7579 */ |
| static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 }; |
| static u8 reset [] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; |
| static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| udelay(200); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| return 0; |
| } |
| |
| static struct cx22702_config cxusb_cx22702_config = { |
| .demod_address = 0x63, |
| .output_mode = CX22702_PARALLEL_OUTPUT, |
| }; |
| |
| static struct lgdt330x_config cxusb_lgdt3303_config = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| }; |
| |
| static struct lgdt330x_config cxusb_aver_lgdt3303_config = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| .clock_polarity_flip = 2, |
| }; |
| |
| static struct mt352_config cxusb_dee1601_config = { |
| .demod_address = 0x0f, |
| .demod_init = cxusb_dee1601_demod_init, |
| }; |
| |
| static struct zl10353_config cxusb_zl10353_dee1601_config = { |
| .demod_address = 0x0f, |
| .parallel_ts = 1, |
| }; |
| |
| static struct mt352_config cxusb_mt352_config = { |
| /* used in both lgz201 and th7579 */ |
| .demod_address = 0x0f, |
| .demod_init = cxusb_mt352_demod_init, |
| }; |
| |
| static struct zl10353_config cxusb_zl10353_xc3028_config = { |
| .demod_address = 0x0f, |
| .if2 = 45600, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| }; |
| |
| static struct mt352_config cxusb_mt352_xc3028_config = { |
| .demod_address = 0x0f, |
| .if2 = 4560, |
| .no_tuner = 1, |
| .demod_init = cxusb_mt352_demod_init, |
| }; |
| |
| /* FIXME: needs tweaking */ |
| static struct mxl5005s_config aver_a868r_tuner = { |
| .i2c_address = 0x63, |
| .if_freq = 6000000UL, |
| .xtal_freq = CRYSTAL_FREQ_16000000HZ, |
| .agc_mode = MXL_SINGLE_AGC, |
| .tracking_filter = MXL_TF_C, |
| .rssi_enable = MXL_RSSI_ENABLE, |
| .cap_select = MXL_CAP_SEL_ENABLE, |
| .div_out = MXL_DIV_OUT_4, |
| .clock_out = MXL_CLOCK_OUT_DISABLE, |
| .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, |
| .top = MXL5005S_TOP_25P2, |
| .mod_mode = MXL_DIGITAL_MODE, |
| .if_mode = MXL_ZERO_IF, |
| .AgcMasterByte = 0x00, |
| }; |
| |
| /* FIXME: needs tweaking */ |
| static struct mxl5005s_config d680_dmb_tuner = { |
| .i2c_address = 0x63, |
| .if_freq = 36125000UL, |
| .xtal_freq = CRYSTAL_FREQ_16000000HZ, |
| .agc_mode = MXL_SINGLE_AGC, |
| .tracking_filter = MXL_TF_C, |
| .rssi_enable = MXL_RSSI_ENABLE, |
| .cap_select = MXL_CAP_SEL_ENABLE, |
| .div_out = MXL_DIV_OUT_4, |
| .clock_out = MXL_CLOCK_OUT_DISABLE, |
| .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, |
| .top = MXL5005S_TOP_25P2, |
| .mod_mode = MXL_DIGITAL_MODE, |
| .if_mode = MXL_ZERO_IF, |
| .AgcMasterByte = 0x00, |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(simple_tuner_attach, adap->fe, |
| &adap->dev->i2c_adap, 0x61, |
| TUNER_PHILIPS_FMD1216ME_MK3); |
| return 0; |
| } |
| |
| static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe, 0x61, |
| NULL, DVB_PLL_THOMSON_DTT7579); |
| return 0; |
| } |
| |
| static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, DVB_PLL_LG_Z201); |
| return 0; |
| } |
| |
| static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe, 0x60, |
| NULL, DVB_PLL_THOMSON_DTT7579); |
| return 0; |
| } |
| |
| static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(simple_tuner_attach, adap->fe, |
| &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); |
| return 0; |
| } |
| |
| static int dvico_bluebird_xc2028_callback(void *ptr, int component, |
| int command, int arg) |
| { |
| struct dvb_usb_adapter *adap = ptr; |
| struct dvb_usb_device *d = adap->dev; |
| |
| switch (command) { |
| case XC2028_TUNER_RESET: |
| deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); |
| cxusb_bluebird_gpio_pulse(d, 0x01, 1); |
| break; |
| case XC2028_RESET_CLK: |
| deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); |
| break; |
| default: |
| deb_info("%s: unknown command %d, arg %d\n", __func__, |
| command, arg); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg = { |
| .i2c_adap = &adap->dev->i2c_adap, |
| .i2c_addr = 0x61, |
| }; |
| static struct xc2028_ctrl ctl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| .demod = XC3028_FE_ZARLINK456, |
| }; |
| |
| /* FIXME: generalize & move to common area */ |
| adap->fe->callback = dvico_bluebird_xc2028_callback; |
| |
| fe = dvb_attach(xc2028_attach, adap->fe, &cfg); |
| if (fe == NULL || fe->ops.tuner_ops.set_config == NULL) |
| return -EIO; |
| |
| fe->ops.tuner_ops.set_config(fe, &ctl); |
| |
| return 0; |
| } |
| |
| static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(mxl5005s_attach, adap->fe, |
| &adap->dev->i2c_adap, &aver_a868r_tuner); |
| return 0; |
| } |
| |
| static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_frontend *fe; |
| fe = dvb_attach(mxl5005s_attach, adap->fe, |
| &adap->dev->i2c_adap, &d680_dmb_tuner); |
| return (fe == NULL) ? -EIO : 0; |
| } |
| |
| static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| u8 b; |
| if (usb_set_interface(adap->dev->udev, 0, 6) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1); |
| |
| if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, |
| &adap->dev->i2c_adap)) != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 7) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config, |
| &adap->dev->i2c_adap)) != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| /* used in both lgz201 and th7579 */ |
| if (usb_set_interface(adap->dev->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config, |
| &adap->dev->i2c_adap)) != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, |
| &adap->dev->i2c_adap)) != NULL) || |
| ((adap->fe = dvb_attach(zl10353_attach, |
| &cxusb_zl10353_dee1601_config, |
| &adap->dev->i2c_adap)) != NULL)) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| u8 ircode[4]; |
| int i; |
| struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, |
| .buf = ircode, .len = 4 }; |
| |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| /* reset the tuner and demodulator */ |
| cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| if ((adap->fe = dvb_attach(zl10353_attach, |
| &cxusb_zl10353_xc3028_config, |
| &adap->dev->i2c_adap)) == NULL) |
| return -EIO; |
| |
| /* try to determine if there is no IR decoder on the I2C bus */ |
| for (i = 0; adap->dev->props.rc_key_map != NULL && i < 5; i++) { |
| msleep(20); |
| if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1) |
| goto no_IR; |
| if (ircode[0] == 0 && ircode[1] == 0) |
| continue; |
| if (ircode[2] + ircode[3] != 0xff) { |
| no_IR: |
| adap->dev->props.rc_key_map = NULL; |
| info("No IR receiver detected on this device."); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct dibx000_agc_config dib7070_agc_config = { |
| .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| |
| /* |
| * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, |
| * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 |
| */ |
| .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | |
| (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| .inv_gain = 600, |
| .time_stabiliz = 10, |
| .alpha_level = 0, |
| .thlock = 118, |
| .wbd_inv = 0, |
| .wbd_ref = 3530, |
| .wbd_sel = 1, |
| .wbd_alpha = 5, |
| .agc1_max = 65535, |
| .agc1_min = 0, |
| .agc2_max = 65535, |
| .agc2_min = 0, |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 40, |
| .agc1_pt3 = 183, |
| .agc1_slope1 = 206, |
| .agc1_slope2 = 255, |
| .agc2_pt1 = 72, |
| .agc2_pt2 = 152, |
| .agc2_slope1 = 88, |
| .agc2_slope2 = 90, |
| .alpha_mant = 17, |
| .alpha_exp = 27, |
| .beta_mant = 23, |
| .beta_exp = 51, |
| .perform_agc_softsplit = 0, |
| }; |
| |
| static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| .internal = 60000, |
| .sampling = 15000, |
| .pll_prediv = 1, |
| .pll_ratio = 20, |
| .pll_range = 3, |
| .pll_reset = 1, |
| .pll_bypass = 0, |
| .enable_refdiv = 0, |
| .bypclk_div = 0, |
| .IO_CLK_en_core = 1, |
| .ADClkSrc = 1, |
| .modulo = 2, |
| /* refsel, sel, freq_15k */ |
| .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), |
| .ifreq = (0 << 25) | 0, |
| .timf = 20452225, |
| .xtal_hz = 12000000, |
| }; |
| |
| static struct dib7000p_config cxusb_dualdig4_rev2_config = { |
| .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc_config_count = 1, |
| .agc = &dib7070_agc_config, |
| .bw = &dib7070_bw_config_12_mhz, |
| .tuner_is_baseband = 1, |
| .spur_protect = 1, |
| |
| .gpio_dir = 0xfcef, |
| .gpio_val = 0x0110, |
| |
| .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| |
| .hostbus_diversity = 1, |
| }; |
| |
| static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, |
| &cxusb_dualdig4_rev2_config); |
| |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, |
| &cxusb_dualdig4_rev2_config); |
| if (adap->fe == NULL) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| { |
| return dib7000p_set_gpio(fe, 8, 0, !onoff); |
| } |
| |
| static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| return 0; |
| } |
| |
| static struct dib0070_config dib7070p_dib0070_config = { |
| .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| .reset = dib7070_tuner_reset, |
| .sleep = dib7070_tuner_sleep, |
| .clock_khz = 12000, |
| }; |
| |
| struct dib0700_adapter_state { |
| int (*set_param_save) (struct dvb_frontend *, |
| struct dvb_frontend_parameters *); |
| }; |
| |
| static int dib7070_set_param_override(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct dvb_usb_adapter *adap = fe->dvb->priv; |
| struct dib0700_adapter_state *state = adap->priv; |
| |
| u16 offset; |
| u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); |
| switch (band) { |
| case BAND_VHF: offset = 950; break; |
| default: |
| case BAND_UHF: offset = 550; break; |
| } |
| |
| dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); |
| |
| return state->set_param_save(fe, fep); |
| } |
| |
| static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_adapter_state *st = adap->priv; |
| struct i2c_adapter *tun_i2c = |
| dib7000p_get_i2c_master(adap->fe, |
| DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, |
| &dib7070p_dib0070_config) == NULL) |
| return -ENODEV; |
| |
| st->set_param_save = adap->fe->ops.tuner_ops.set_params; |
| adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override; |
| return 0; |
| } |
| |
| static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| if (usb_set_interface(adap->dev->udev, 0, 1) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); |
| |
| /* reset the tuner and demodulator */ |
| cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); |
| cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); |
| |
| if ((adap->fe = dvb_attach(zl10353_attach, |
| &cxusb_zl10353_xc3028_config, |
| &adap->dev->i2c_adap)) != NULL) |
| return 0; |
| |
| if ((adap->fe = dvb_attach(mt352_attach, |
| &cxusb_mt352_xc3028_config, |
| &adap->dev->i2c_adap)) != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static struct lgs8gxx_config d680_lgs8gl5_cfg = { |
| .prod = LGS8GXX_PROD_LGS8GL5, |
| .demod_address = 0x19, |
| .serial_ts = 0, |
| .ts_clk_pol = 0, |
| .ts_clk_gated = 1, |
| .if_clk_freq = 30400, /* 30.4 MHz */ |
| .if_freq = 5725, /* 5.725 MHz */ |
| .if_neg_center = 0, |
| .ext_adc = 0, |
| .adc_signed = 0, |
| .if_neg_edge = 0, |
| }; |
| |
| static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap->dev; |
| int n; |
| |
| /* Select required USB configuration */ |
| if (usb_set_interface(d->udev, 0, 0) < 0) |
| err("set interface failed"); |
| |
| /* Unblock all USB pipes */ |
| usb_clear_halt(d->udev, |
| usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev, |
| usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint)); |
| |
| /* Drain USB pipes to avoid hang after reboot */ |
| for (n = 0; n < 5; n++) { |
| cxusb_d680_dmb_drain_message(d); |
| cxusb_d680_dmb_drain_video(d); |
| msleep(200); |
| } |
| |
| /* Reset the tuner */ |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { |
| err("clear tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { |
| err("set tuner gpio failed"); |
| return -EIO; |
| } |
| msleep(100); |
| |
| /* Attach frontend */ |
| adap->fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap); |
| if (adap->fe == NULL) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /* |
| * DViCO has shipped two devices with the same USB ID, but only one of them |
| * needs a firmware download. Check the device class details to see if they |
| * have non-default values to decide whether the device is actually cold or |
| * not, and forget a match if it turns out we selected the wrong device. |
| */ |
| static int bluebird_fx2_identify_state(struct usb_device *udev, |
| struct dvb_usb_device_properties *props, |
| struct dvb_usb_device_description **desc, |
| int *cold) |
| { |
| int wascold = *cold; |
| |
| *cold = udev->descriptor.bDeviceClass == 0xff && |
| udev->descriptor.bDeviceSubClass == 0xff && |
| udev->descriptor.bDeviceProtocol == 0xff; |
| |
| if (*cold && !wascold) |
| *desc = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * DViCO bluebird firmware needs the "warm" product ID to be patched into the |
| * firmware file before download. |
| */ |
| |
| static const int dvico_firmware_id_offsets[] = { 6638, 3204 }; |
| static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, |
| const struct firmware *fw) |
| { |
| int pos; |
| |
| for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) { |
| int idoff = dvico_firmware_id_offsets[pos]; |
| |
| if (fw->size < idoff + 4) |
| continue; |
| |
| if (fw->data[idoff] == (USB_VID_DVICO & 0xff) && |
| fw->data[idoff + 1] == USB_VID_DVICO >> 8) { |
| struct firmware new_fw; |
| u8 *new_fw_data = vmalloc(fw->size); |
| int ret; |
| |
| if (!new_fw_data) |
| return -ENOMEM; |
| |
| memcpy(new_fw_data, fw->data, fw->size); |
| new_fw.size = fw->size; |
| new_fw.data = new_fw_data; |
| |
| new_fw_data[idoff + 2] = |
| le16_to_cpu(udev->descriptor.idProduct) + 1; |
| new_fw_data[idoff + 3] = |
| le16_to_cpu(udev->descriptor.idProduct) >> 8; |
| |
| ret = usb_cypress_load_firmware(udev, &new_fw, |
| CYPRESS_FX2); |
| vfree(new_fw_data); |
| return ret; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties cxusb_medion_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; |
| static struct dvb_usb_device_properties cxusb_aver_a868r_properties; |
| static struct dvb_usb_device_properties cxusb_d680_dmb_properties; |
| |
| static int cxusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, |
| &cxusb_bluebird_nano2_needsfirmware_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, |
| &cxusb_bluebird_dualdig4_rev2_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static struct usb_device_id cxusb_table [] = { |
| { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, |
| { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, |
| { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, |
| { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, |
| {} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE (usb, cxusb_table); |
| |
| static struct dvb_usb_device_properties cxusb_medion_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_cx22702_frontend_attach, |
| .tuner_attach = cxusb_fmd1216me_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| |
| }, |
| }, |
| .power_ctrl = cxusb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Medion MD95700 (MDUSBTV-HYBRID)", |
| { NULL }, |
| { &cxusb_table[0], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* use usb alt setting 0 for EP4 transfer (dvb-t), |
| use usb alt setting 7 for EP2 transfer (atsc) */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_lgdt3303_frontend_attach, |
| .tuner_attach = cxusb_lgh064f_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_portable_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_portable_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV5 USB Gold", |
| { &cxusb_table[1], NULL }, |
| { &cxusb_table[2], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* use usb alt setting 0 for EP4 transfer (dvb-t), |
| use usb alt setting 7 for EP2 transfer (atsc) */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dee1601_frontend_attach, |
| .tuner_attach = cxusb_dee1601_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc_interval = 150, |
| .rc_key_map = dvico_mce_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 3, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual USB", |
| { &cxusb_table[3], NULL }, |
| { &cxusb_table[4], NULL }, |
| }, |
| { "DigitalNow DVB-T Dual USB", |
| { &cxusb_table[9], NULL }, |
| { &cxusb_table[10], NULL }, |
| }, |
| { "DViCO FusionHDTV DVB-T Dual Digital 2", |
| { &cxusb_table[11], NULL }, |
| { &cxusb_table[12], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* use usb alt setting 0 for EP4 transfer (dvb-t), |
| use usb alt setting 7 for EP2 transfer (atsc) */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_mt352_frontend_attach, |
| .tuner_attach = cxusb_lgz201_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_portable_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_portable_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T USB (LGZ201)", |
| { &cxusb_table[5], NULL }, |
| { &cxusb_table[6], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-01.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| /* use usb alt setting 0 for EP4 transfer (dvb-t), |
| use usb alt setting 7 for EP2 transfer (atsc) */ |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_mt352_frontend_attach, |
| .tuner_attach = cxusb_dtt7579_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_portable_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_portable_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T USB (TH7579)", |
| { &cxusb_table[7], NULL }, |
| { &cxusb_table[8], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dualdig4_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_mce_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys), |
| .rc_query = cxusb_bluebird2_rc_query, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual Digital 4", |
| { NULL }, |
| { &cxusb_table[13], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| .identify_state = bluebird_fx2_identify_state, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_nano2_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_nano2_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_portable_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_portable_rc_keys), |
| .rc_query = cxusb_bluebird2_rc_query, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T NANO2", |
| { NULL }, |
| { &cxusb_table[14], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-bluebird-02.fw", |
| .download_firmware = bluebird_patch_dvico_firmware_download, |
| .identify_state = bluebird_fx2_identify_state, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_nano2_frontend_attach, |
| .tuner_attach = cxusb_dvico_xc3028_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_nano2_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_portable_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_portable_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T NANO2 w/o firmware", |
| { &cxusb_table[14], NULL }, |
| { &cxusb_table[15], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_aver_streaming_ctrl, |
| .frontend_attach = cxusb_aver_lgdt3303_frontend_attach, |
| .tuner_attach = cxusb_mxl5003s_tuner_attach, |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x04, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| |
| }, |
| }, |
| .power_ctrl = cxusb_aver_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "AVerMedia AVerTVHD Volar (A868R)", |
| { NULL }, |
| { &cxusb_table[16], NULL }, |
| }, |
| } |
| }; |
| |
| static |
| struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, |
| .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, |
| .size_of_priv = sizeof(struct dib0700_adapter_state), |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 7, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_bluebird_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc_interval = 100, |
| .rc_key_map = dvico_mce_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys), |
| .rc_query = cxusb_rc_query, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", |
| { NULL }, |
| { &cxusb_table[17], NULL }, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, |
| .frontend_attach = cxusb_d680_dmb_frontend_attach, |
| .tuner_attach = cxusb_d680_dmb_tuner_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 8192, |
| } |
| } |
| }, |
| }, |
| }, |
| |
| .power_ctrl = cxusb_d680_dmb_power_ctrl, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .rc_interval = 100, |
| .rc_key_map = d680_dmb_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys), |
| .rc_query = cxusb_d680_dmb_rc_query, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| "Conexant DMB-TH Stick", |
| { NULL }, |
| { &cxusb_table[18], NULL }, |
| }, |
| } |
| }; |
| |
| static struct usb_driver cxusb_driver = { |
| .name = "dvb_usb_cxusb", |
| .probe = cxusb_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = cxusb_table, |
| }; |
| |
| /* module stuff */ |
| static int __init cxusb_module_init(void) |
| { |
| int result; |
| if ((result = usb_register(&cxusb_driver))) { |
| err("usb_register failed. Error number %d",result); |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit cxusb_module_exit(void) |
| { |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&cxusb_driver); |
| } |
| |
| module_init (cxusb_module_init); |
| module_exit (cxusb_module_exit); |
| |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); |
| MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); |
| MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); |
| MODULE_VERSION("1.0-alpha"); |
| MODULE_LICENSE("GPL"); |