| /* |
| * Device Tree Source for IBM/AMCC Taishan |
| * |
| * Copyright 2007 IBM Corp. |
| * Hugh Blemings <hugh@au.ibm.com> based off code by |
| * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without |
| * any warranty of any kind, whether express or implied. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| model = "amcc,taishan"; |
| compatible = "amcc,taishan"; |
| dcr-parent = <&{/cpus/cpu@0}>; |
| |
| aliases { |
| ethernet0 = &EMAC2; |
| ethernet1 = &EMAC3; |
| serial0 = &UART0; |
| serial1 = &UART1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| model = "PowerPC,440GX"; |
| reg = <0x00000000>; |
| clock-frequency = <800000000>; // 800MHz |
| timebase-frequency = <0>; // Filled in by zImage |
| i-cache-line-size = <50>; |
| d-cache-line-size = <50>; |
| i-cache-size = <32768>; /* 32 kB */ |
| d-cache-size = <32768>; /* 32 kB */ |
| dcr-controller; |
| dcr-access-method = "native"; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage |
| }; |
| |
| |
| UICB0: interrupt-controller-base { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <3>; |
| dcr-reg = <0x200 0x009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| }; |
| |
| |
| UIC0: interrupt-controller0 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <0>; |
| dcr-reg = <0x0c0 0x009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */ |
| interrupt-parent = <&UICB0>; |
| |
| }; |
| |
| UIC1: interrupt-controller1 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <1>; |
| dcr-reg = <0x0d0 0x009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <0x3 0x4 0x2 0x4>; /* cascade */ |
| interrupt-parent = <&UICB0>; |
| }; |
| |
| UIC2: interrupt-controller2 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <2>; /* was 1 */ |
| dcr-reg = <0x210 0x009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <0x5 0x4 0x4 0x4>; /* cascade */ |
| interrupt-parent = <&UICB0>; |
| }; |
| |
| |
| CPC0: cpc { |
| compatible = "ibm,cpc-440gp"; |
| dcr-reg = <0x0b0 0x003 0x0e0 0x010>; |
| // FIXME: anything else? |
| }; |
| |
| L2C0: l2c { |
| compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; |
| dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ |
| 0x030 0x008>; /* L2 cache DCR's */ |
| cache-line-size = <32>; /* 32 bytes */ |
| cache-size = <262144>; /* L2, 256K */ |
| interrupt-parent = <&UIC2>; |
| interrupts = <0x17 0x1>; |
| }; |
| |
| plb { |
| compatible = "ibm,plb-440gx", "ibm,plb4"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| clock-frequency = <160000000>; // 160MHz |
| |
| SDRAM0: memory-controller { |
| compatible = "ibm,sdram-440gp"; |
| dcr-reg = <0x010 0x002>; |
| // FIXME: anything else? |
| }; |
| |
| SRAM0: sram { |
| compatible = "ibm,sram-440gp"; |
| dcr-reg = <0x020 0x008 0x00a 0x001>; |
| }; |
| |
| DMA0: dma { |
| // FIXME: ??? |
| compatible = "ibm,dma-440gp"; |
| dcr-reg = <0x100 0x027>; |
| }; |
| |
| MAL0: mcmal { |
| compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; |
| dcr-reg = <0x180 0x062>; |
| num-tx-chans = <4>; |
| num-rx-chans = <4>; |
| interrupt-parent = <&MAL0>; |
| interrupts = <0x0 0x1 0x2 0x3 0x4>; |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 |
| /*RXEOB*/ 0x1 &UIC0 0xb 0x4 |
| /*SERR*/ 0x2 &UIC1 0x0 0x4 |
| /*TXDE*/ 0x3 &UIC1 0x1 0x4 |
| /*RXDE*/ 0x4 &UIC1 0x2 0x4>; |
| interrupt-map-mask = <0xffffffff>; |
| }; |
| |
| POB0: opb { |
| compatible = "ibm,opb-440gx", "ibm,opb"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| /* Wish there was a nicer way of specifying a full 32-bit |
| range */ |
| ranges = <0x00000000 0x00000001 0x00000000 0x80000000 |
| 0x80000000 0x00000001 0x80000000 0x80000000>; |
| dcr-reg = <0x090 0x00b>; |
| interrupt-parent = <&UIC1>; |
| interrupts = <0x7 0x4>; |
| clock-frequency = <80000000>; // 80MHz |
| |
| |
| EBC0: ebc { |
| compatible = "ibm,ebc-440gx", "ibm,ebc"; |
| dcr-reg = <0x012 0x002>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| clock-frequency = <80000000>; // 80MHz |
| |
| /* ranges property is supplied by zImage |
| * based on firmware's configuration of the |
| * EBC bridge */ |
| |
| interrupts = <0x5 0x4>; |
| interrupt-parent = <&UIC1>; |
| |
| nor_flash@0,0 { |
| compatible = "cfi-flash"; |
| bank-width = <4>; |
| device-width = <2>; |
| reg = <0x0 0x0 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "kernel"; |
| reg = <0x0 0x180000>; |
| }; |
| partition@180000 { |
| label = "root"; |
| reg = <0x180000 0x200000>; |
| }; |
| partition@380000 { |
| label = "user"; |
| reg = <0x380000 0x3bc0000>; |
| }; |
| partition@3f40000 { |
| label = "env"; |
| reg = <0x3f40000 0x80000>; |
| }; |
| partition@3fc0000 { |
| label = "u-boot"; |
| reg = <0x3fc0000 0x40000>; |
| }; |
| }; |
| }; |
| |
| |
| |
| UART0: serial@40000200 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x40000200 0x00000008>; |
| virtual-reg = <0xe0000200>; |
| clock-frequency = <11059200>; |
| current-speed = <115200>; /* 115200 */ |
| interrupt-parent = <&UIC0>; |
| interrupts = <0x0 0x4>; |
| }; |
| |
| UART1: serial@40000300 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x40000300 0x00000008>; |
| virtual-reg = <0xe0000300>; |
| clock-frequency = <11059200>; |
| current-speed = <115200>; /* 115200 */ |
| interrupt-parent = <&UIC0>; |
| interrupts = <0x1 0x4>; |
| }; |
| |
| IIC0: i2c@40000400 { |
| /* FIXME */ |
| compatible = "ibm,iic-440gp", "ibm,iic"; |
| reg = <0x40000400 0x00000014>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <0x2 0x4>; |
| }; |
| IIC1: i2c@40000500 { |
| /* FIXME */ |
| compatible = "ibm,iic-440gp", "ibm,iic"; |
| reg = <0x40000500 0x00000014>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <0x3 0x4>; |
| }; |
| |
| GPIO0: gpio@40000700 { |
| /* FIXME */ |
| compatible = "ibm,gpio-440gp"; |
| reg = <0x40000700 0x00000020>; |
| }; |
| |
| ZMII0: emac-zmii@40000780 { |
| compatible = "ibm,zmii-440gx", "ibm,zmii"; |
| reg = <0x40000780 0x0000000c>; |
| }; |
| |
| RGMII0: emac-rgmii@40000790 { |
| compatible = "ibm,rgmii"; |
| reg = <0x40000790 0x00000008>; |
| }; |
| |
| TAH0: emac-tah@40000b50 { |
| compatible = "ibm,tah-440gx", "ibm,tah"; |
| reg = <0x40000b50 0x00000030>; |
| }; |
| |
| TAH1: emac-tah@40000d50 { |
| compatible = "ibm,tah-440gx", "ibm,tah"; |
| reg = <0x40000d50 0x00000030>; |
| }; |
| |
| EMAC0: ethernet@40000800 { |
| unused = <0x1>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC1>; |
| interrupts = <0x1c 0x4 0x1d 0x4>; |
| reg = <0x40000800 0x00000074>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <0>; |
| mal-rx-channel = <0>; |
| cell-index = <0>; |
| max-frame-size = <1500>; |
| rx-fifo-size = <4096>; |
| tx-fifo-size = <2048>; |
| phy-mode = "rmii"; |
| phy-map = <0x00000001>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <0>; |
| }; |
| EMAC1: ethernet@40000900 { |
| unused = <0x1>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC1>; |
| interrupts = <0x1e 0x4 0x1f 0x4>; |
| reg = <0x40000900 0x00000074>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <1>; |
| mal-rx-channel = <1>; |
| cell-index = <1>; |
| max-frame-size = <1500>; |
| rx-fifo-size = <4096>; |
| tx-fifo-size = <2048>; |
| phy-mode = "rmii"; |
| phy-map = <0x00000001>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <1>; |
| }; |
| |
| EMAC2: ethernet@40000c00 { |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC2>; |
| interrupts = <0x0 0x4 0x1 0x4>; |
| reg = <0x40000c00 0x00000074>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <2>; |
| mal-rx-channel = <2>; |
| cell-index = <2>; |
| max-frame-size = <9000>; |
| rx-fifo-size = <4096>; |
| tx-fifo-size = <2048>; |
| phy-mode = "rgmii"; |
| phy-map = <0x00000001>; |
| rgmii-device = <&RGMII0>; |
| rgmii-channel = <0>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <2>; |
| tah-device = <&TAH0>; |
| tah-channel = <0>; |
| }; |
| |
| EMAC3: ethernet@40000e00 { |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC2>; |
| interrupts = <0x2 0x4 0x3 0x4>; |
| reg = <0x40000e00 0x00000074>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <3>; |
| mal-rx-channel = <3>; |
| cell-index = <3>; |
| max-frame-size = <9000>; |
| rx-fifo-size = <4096>; |
| tx-fifo-size = <2048>; |
| phy-mode = "rgmii"; |
| phy-map = <0x00000003>; |
| rgmii-device = <&RGMII0>; |
| rgmii-channel = <1>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <3>; |
| tah-device = <&TAH1>; |
| tah-channel = <0>; |
| }; |
| |
| |
| GPT0: gpt@40000a00 { |
| /* FIXME */ |
| reg = <0x40000a00 0x000000d4>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; |
| }; |
| |
| }; |
| |
| PCIX0: pci@20ec00000 { |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; |
| primary; |
| large-inbound-windows; |
| enable-msi-hole; |
| reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ |
| 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ |
| 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ |
| 0x00000002 0x0ec80000 0x00000100 /* Internal registers */ |
| 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ |
| |
| /* Outbound ranges, one memory and one IO, |
| * later cannot be changed |
| */ |
| ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 |
| 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; |
| |
| /* Inbound 2GB range starting at 0 */ |
| dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; |
| |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 1 */ |
| 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8 |
| 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8 |
| 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8 |
| 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8 |
| |
| /* IDSEL 2 */ |
| 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8 |
| 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8 |
| 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8 |
| 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8 |
| >; |
| }; |
| }; |
| |
| chosen { |
| linux,stdout-path = "/plb/opb/serial@40000300"; |
| }; |
| }; |
