| * Clock bindings for Freescale i.MX5 |
| |
| Required properties: |
| - compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53 |
| - reg: Address and length of the register set |
| - interrupts: Should contain CCM interrupt |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. The following is a full list of i.MX5 |
| clocks and IDs. |
| |
| Clock ID |
| --------------------------- |
| dummy 0 |
| ckil 1 |
| osc 2 |
| ckih1 3 |
| ckih2 4 |
| ahb 5 |
| ipg 6 |
| axi_a 7 |
| axi_b 8 |
| uart_pred 9 |
| uart_root 10 |
| esdhc_a_pred 11 |
| esdhc_b_pred 12 |
| esdhc_c_s 13 |
| esdhc_d_s 14 |
| emi_sel 15 |
| emi_slow_podf 16 |
| nfc_podf 17 |
| ecspi_pred 18 |
| ecspi_podf 19 |
| usboh3_pred 20 |
| usboh3_podf 21 |
| usb_phy_pred 22 |
| usb_phy_podf 23 |
| cpu_podf 24 |
| di_pred 25 |
| tve_s 27 |
| uart1_ipg_gate 28 |
| uart1_per_gate 29 |
| uart2_ipg_gate 30 |
| uart2_per_gate 31 |
| uart3_ipg_gate 32 |
| uart3_per_gate 33 |
| i2c1_gate 34 |
| i2c2_gate 35 |
| gpt_ipg_gate 36 |
| pwm1_ipg_gate 37 |
| pwm1_hf_gate 38 |
| pwm2_ipg_gate 39 |
| pwm2_hf_gate 40 |
| gpt_hf_gate 41 |
| fec_gate 42 |
| usboh3_per_gate 43 |
| esdhc1_ipg_gate 44 |
| esdhc2_ipg_gate 45 |
| esdhc3_ipg_gate 46 |
| esdhc4_ipg_gate 47 |
| ssi1_ipg_gate 48 |
| ssi2_ipg_gate 49 |
| ssi3_ipg_gate 50 |
| ecspi1_ipg_gate 51 |
| ecspi1_per_gate 52 |
| ecspi2_ipg_gate 53 |
| ecspi2_per_gate 54 |
| cspi_ipg_gate 55 |
| sdma_gate 56 |
| emi_slow_gate 57 |
| ipu_s 58 |
| ipu_gate 59 |
| nfc_gate 60 |
| ipu_di1_gate 61 |
| vpu_s 62 |
| vpu_gate 63 |
| vpu_reference_gate 64 |
| uart4_ipg_gate 65 |
| uart4_per_gate 66 |
| uart5_ipg_gate 67 |
| uart5_per_gate 68 |
| tve_gate 69 |
| tve_pred 70 |
| esdhc1_per_gate 71 |
| esdhc2_per_gate 72 |
| esdhc3_per_gate 73 |
| esdhc4_per_gate 74 |
| usb_phy_gate 75 |
| hsi2c_gate 76 |
| mipi_hsc1_gate 77 |
| mipi_hsc2_gate 78 |
| mipi_esc_gate 79 |
| mipi_hsp_gate 80 |
| ldb_di1_div_3_5 81 |
| ldb_di1_div 82 |
| ldb_di0_div_3_5 83 |
| ldb_di0_div 84 |
| ldb_di1_gate 85 |
| can2_serial_gate 86 |
| can2_ipg_gate 87 |
| i2c3_gate 88 |
| lp_apm 89 |
| periph_apm 90 |
| main_bus 91 |
| ahb_max 92 |
| aips_tz1 93 |
| aips_tz2 94 |
| tmax1 95 |
| tmax2 96 |
| tmax3 97 |
| spba 98 |
| uart_sel 99 |
| esdhc_a_sel 100 |
| esdhc_b_sel 101 |
| esdhc_a_podf 102 |
| esdhc_b_podf 103 |
| ecspi_sel 104 |
| usboh3_sel 105 |
| usb_phy_sel 106 |
| iim_gate 107 |
| usboh3_gate 108 |
| emi_fast_gate 109 |
| ipu_di0_gate 110 |
| gpc_dvfs 111 |
| pll1_sw 112 |
| pll2_sw 113 |
| pll3_sw 114 |
| ipu_di0_sel 115 |
| ipu_di1_sel 116 |
| tve_ext_sel 117 |
| mx51_mipi 118 |
| pll4_sw 119 |
| ldb_di1_sel 120 |
| di_pll4_podf 121 |
| ldb_di0_sel 122 |
| ldb_di0_gate 123 |
| usb_phy1_gate 124 |
| usb_phy2_gate 125 |
| per_lp_apm 126 |
| per_pred1 127 |
| per_pred2 128 |
| per_podf 129 |
| per_root 130 |
| ssi_apm 131 |
| ssi1_root_sel 132 |
| ssi2_root_sel 133 |
| ssi3_root_sel 134 |
| ssi_ext1_sel 135 |
| ssi_ext2_sel 136 |
| ssi_ext1_com_sel 137 |
| ssi_ext2_com_sel 138 |
| ssi1_root_pred 139 |
| ssi1_root_podf 140 |
| ssi2_root_pred 141 |
| ssi2_root_podf 142 |
| ssi_ext1_pred 143 |
| ssi_ext1_podf 144 |
| ssi_ext2_pred 145 |
| ssi_ext2_podf 146 |
| ssi1_root_gate 147 |
| ssi2_root_gate 148 |
| ssi3_root_gate 149 |
| ssi_ext1_gate 150 |
| ssi_ext2_gate 151 |
| epit1_ipg_gate 152 |
| epit1_hf_gate 153 |
| epit2_ipg_gate 154 |
| epit2_hf_gate 155 |
| can_sel 156 |
| can1_serial_gate 157 |
| can1_ipg_gate 158 |
| owire_gate 159 |
| gpu3d_s 160 |
| gpu2d_s 161 |
| gpu3d_gate 162 |
| gpu2d_gate 163 |
| garb_gate 164 |
| cko1_sel 165 |
| cko1_podf 166 |
| cko1 167 |
| cko2_sel 168 |
| cko2_podf 169 |
| cko2 170 |
| srtc_gate 171 |
| pata_gate 172 |
| sata_gate 173 |
| spdif_xtal_sel 174 |
| spdif0_sel 175 |
| spdif1_sel 176 |
| spdif0_pred 177 |
| spdif0_podf 178 |
| spdif1_pred 179 |
| spdif1_podf 180 |
| spdif0_com_sel 181 |
| spdif1_com_sel 182 |
| spdif0_gate 183 |
| spdif1_gate 184 |
| spdif_ipg_gate 185 |
| |
| Examples (for mx53): |
| |
| clks: ccm@53fd4000{ |
| compatible = "fsl,imx53-ccm"; |
| reg = <0x53fd4000 0x4000>; |
| interrupts = <0 71 0x04 0 72 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| can1: can@53fc8000 { |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fc8000 0x4000>; |
| interrupts = <82>; |
| clocks = <&clks 158>, <&clks 157>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
