| /* |
| * Port for PPC64 David Engebretsen, IBM Corp. |
| * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. |
| * |
| * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM |
| * Rework, based on alpha PCI code. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/mm.h> |
| #include <linux/list.h> |
| #include <linux/syscalls.h> |
| #include <linux/irq.h> |
| #include <linux/vmalloc.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/byteorder.h> |
| #include <asm/machdep.h> |
| #include <asm/ppc-pci.h> |
| |
| #ifdef DEBUG |
| #include <asm/udbg.h> |
| #define DBG(fmt...) printk(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| unsigned long pci_probe_only = 1; |
| |
| /* pci_io_base -- the base address from which io bars are offsets. |
| * This is the lowest I/O base address (so bar values are always positive), |
| * and it *must* be the start of ISA space if an ISA bus exists because |
| * ISA drivers use hard coded offsets. If no ISA bus exists nothing |
| * is mapped on the first 64K of IO space |
| */ |
| unsigned long pci_io_base = ISA_IO_BASE; |
| EXPORT_SYMBOL(pci_io_base); |
| |
| LIST_HEAD(hose_list); |
| |
| static struct dma_mapping_ops *pci_dma_ops; |
| |
| void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) |
| { |
| pci_dma_ops = dma_ops; |
| } |
| |
| struct dma_mapping_ops *get_pci_dma_ops(void) |
| { |
| return pci_dma_ops; |
| } |
| EXPORT_SYMBOL(get_pci_dma_ops); |
| |
| |
| int pci_set_dma_mask(struct pci_dev *dev, u64 mask) |
| { |
| return dma_set_mask(&dev->dev, mask); |
| } |
| |
| int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) |
| { |
| int rc; |
| |
| rc = dma_set_mask(&dev->dev, mask); |
| dev->dev.coherent_dma_mask = dev->dma_mask; |
| |
| return rc; |
| } |
| |
| static void fixup_broken_pcnet32(struct pci_dev* dev) |
| { |
| if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { |
| dev->vendor = PCI_VENDOR_ID_AMD; |
| pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); |
| |
| |
| static u32 get_int_prop(struct device_node *np, const char *name, u32 def) |
| { |
| const u32 *prop; |
| int len; |
| |
| prop = of_get_property(np, name, &len); |
| if (prop && len >= 4) |
| return *prop; |
| return def; |
| } |
| |
| static unsigned int pci_parse_of_flags(u32 addr0) |
| { |
| unsigned int flags = 0; |
| |
| if (addr0 & 0x02000000) { |
| flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; |
| flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; |
| flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; |
| if (addr0 & 0x40000000) |
| flags |= IORESOURCE_PREFETCH |
| | PCI_BASE_ADDRESS_MEM_PREFETCH; |
| } else if (addr0 & 0x01000000) |
| flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; |
| return flags; |
| } |
| |
| |
| static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) |
| { |
| u64 base, size; |
| unsigned int flags; |
| struct resource *res; |
| const u32 *addrs; |
| u32 i; |
| int proplen; |
| |
| addrs = of_get_property(node, "assigned-addresses", &proplen); |
| if (!addrs) |
| return; |
| DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs); |
| for (; proplen >= 20; proplen -= 20, addrs += 5) { |
| flags = pci_parse_of_flags(addrs[0]); |
| if (!flags) |
| continue; |
| base = of_read_number(&addrs[1], 2); |
| size = of_read_number(&addrs[3], 2); |
| if (!size) |
| continue; |
| i = addrs[0] & 0xff; |
| DBG(" base: %llx, size: %llx, i: %x\n", |
| (unsigned long long)base, (unsigned long long)size, i); |
| |
| if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { |
| res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; |
| } else if (i == dev->rom_base_reg) { |
| res = &dev->resource[PCI_ROM_RESOURCE]; |
| flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; |
| } else { |
| printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); |
| continue; |
| } |
| res->start = base; |
| res->end = base + size - 1; |
| res->flags = flags; |
| res->name = pci_name(dev); |
| } |
| } |
| |
| struct pci_dev *of_create_pci_dev(struct device_node *node, |
| struct pci_bus *bus, int devfn) |
| { |
| struct pci_dev *dev; |
| const char *type; |
| |
| dev = alloc_pci_dev(); |
| if (!dev) |
| return NULL; |
| type = of_get_property(node, "device_type", NULL); |
| if (type == NULL) |
| type = ""; |
| |
| DBG(" create device, devfn: %x, type: %s\n", devfn, type); |
| |
| dev->bus = bus; |
| dev->sysdata = node; |
| dev->dev.parent = bus->bridge; |
| dev->dev.bus = &pci_bus_type; |
| dev->devfn = devfn; |
| dev->multifunction = 0; /* maybe a lie? */ |
| |
| dev->vendor = get_int_prop(node, "vendor-id", 0xffff); |
| dev->device = get_int_prop(node, "device-id", 0xffff); |
| dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); |
| dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); |
| |
| dev->cfg_size = pci_cfg_space_size(dev); |
| |
| dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| dev->class = get_int_prop(node, "class-code", 0); |
| dev->revision = get_int_prop(node, "revision-id", 0); |
| |
| DBG(" class: 0x%x\n", dev->class); |
| DBG(" revision: 0x%x\n", dev->revision); |
| |
| dev->current_state = 4; /* unknown power state */ |
| dev->error_state = pci_channel_io_normal; |
| dev->dma_mask = 0xffffffff; |
| |
| if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { |
| /* a PCI-PCI bridge */ |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| } else if (!strcmp(type, "cardbus")) { |
| dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; |
| } else { |
| dev->hdr_type = PCI_HEADER_TYPE_NORMAL; |
| dev->rom_base_reg = PCI_ROM_ADDRESS; |
| /* Maybe do a default OF mapping here */ |
| dev->irq = NO_IRQ; |
| } |
| |
| pci_parse_of_addrs(node, dev); |
| |
| DBG(" adding to system ...\n"); |
| |
| pci_device_add(dev, bus); |
| |
| return dev; |
| } |
| EXPORT_SYMBOL(of_create_pci_dev); |
| |
| void __devinit of_scan_bus(struct device_node *node, |
| struct pci_bus *bus) |
| { |
| struct device_node *child; |
| const u32 *reg; |
| int reglen, devfn; |
| struct pci_dev *dev; |
| |
| DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number); |
| |
| /* Scan direct children */ |
| for_each_child_of_node(node, child) { |
| DBG(" * %s\n", child->full_name); |
| reg = of_get_property(child, "reg", ®len); |
| if (reg == NULL || reglen < 20) |
| continue; |
| devfn = (reg[0] >> 8) & 0xff; |
| |
| /* create a new pci_dev for this device */ |
| dev = of_create_pci_dev(child, bus, devfn); |
| if (!dev) |
| continue; |
| DBG(" dev header type: %x\n", dev->hdr_type); |
| } |
| |
| /* Ally all fixups */ |
| pcibios_fixup_of_probed_bus(bus); |
| |
| /* Now scan child busses */ |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { |
| struct device_node *child = pci_device_to_OF_node(dev); |
| if (dev) |
| of_scan_pci_bridge(child, dev); |
| } |
| } |
| } |
| EXPORT_SYMBOL(of_scan_bus); |
| |
| void __devinit of_scan_pci_bridge(struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct pci_bus *bus; |
| const u32 *busrange, *ranges; |
| int len, i, mode; |
| struct resource *res; |
| unsigned int flags; |
| u64 size; |
| |
| DBG("of_scan_pci_bridge(%s)\n", node->full_name); |
| |
| /* parse bus-range property */ |
| busrange = of_get_property(node, "bus-range", &len); |
| if (busrange == NULL || len != 8) { |
| printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| ranges = of_get_property(node, "ranges", &len); |
| if (ranges == NULL) { |
| printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus = pci_add_new_bus(dev->bus, dev, busrange[0]); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create pci bus for %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus->primary = dev->bus->number; |
| bus->subordinate = busrange[1]; |
| bus->bridge_ctl = 0; |
| bus->sysdata = node; |
| |
| /* parse ranges property */ |
| /* PCI #address-cells == 3 and #size-cells == 2 always */ |
| res = &dev->resource[PCI_BRIDGE_RESOURCES]; |
| for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { |
| res->flags = 0; |
| bus->resource[i] = res; |
| ++res; |
| } |
| i = 1; |
| for (; len >= 32; len -= 32, ranges += 8) { |
| flags = pci_parse_of_flags(ranges[0]); |
| size = of_read_number(&ranges[6], 2); |
| if (flags == 0 || size == 0) |
| continue; |
| if (flags & IORESOURCE_IO) { |
| res = bus->resource[0]; |
| if (res->flags) { |
| printk(KERN_ERR "PCI: ignoring extra I/O range" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| } else { |
| if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { |
| printk(KERN_ERR "PCI: too many memory ranges" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| res = bus->resource[i]; |
| ++i; |
| } |
| res->start = of_read_number(&ranges[1], 2); |
| res->end = res->start + size - 1; |
| res->flags = flags; |
| } |
| sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), |
| bus->number); |
| DBG(" bus name: %s\n", bus->name); |
| |
| mode = PCI_PROBE_NORMAL; |
| if (ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| DBG(" probe mode: %d\n", mode); |
| |
| if (mode == PCI_PROBE_DEVTREE) |
| of_scan_bus(node, bus); |
| else if (mode == PCI_PROBE_NORMAL) |
| pci_scan_child_bus(bus); |
| } |
| EXPORT_SYMBOL(of_scan_pci_bridge); |
| |
| void __devinit scan_phb(struct pci_controller *hose) |
| { |
| struct pci_bus *bus; |
| struct device_node *node = hose->dn; |
| int i, mode; |
| |
| DBG("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>"); |
| |
| /* Create an empty bus for the toplevel */ |
| bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); |
| if (bus == NULL) { |
| printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", |
| hose->global_number); |
| return; |
| } |
| bus->secondary = hose->first_busno; |
| hose->bus = bus; |
| |
| /* Get some IO space for the new PHB */ |
| pcibios_map_io_space(bus); |
| |
| /* Wire up PHB bus resources */ |
| DBG("PCI: PHB IO resource = %016lx-%016lx [%lx]\n", |
| hose->io_resource.start, hose->io_resource.end, |
| hose->io_resource.flags); |
| bus->resource[0] = &hose->io_resource; |
| for (i = 0; i < 3; ++i) { |
| DBG("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i, |
| hose->mem_resources[i].start, |
| hose->mem_resources[i].end, |
| hose->mem_resources[i].flags); |
| bus->resource[i+1] = &hose->mem_resources[i]; |
| } |
| DBG("PCI: PHB MEM offset = %016lx\n", hose->pci_mem_offset); |
| DBG("PCI: PHB IO offset = %08lx\n", |
| (unsigned long)hose->io_base_virt - _IO_BASE); |
| |
| /* Get probe mode and perform scan */ |
| mode = PCI_PROBE_NORMAL; |
| if (node && ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| DBG(" probe mode: %d\n", mode); |
| if (mode == PCI_PROBE_DEVTREE) { |
| bus->subordinate = hose->last_busno; |
| of_scan_bus(node, bus); |
| } |
| |
| if (mode == PCI_PROBE_NORMAL) |
| hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| printk(KERN_INFO "PCI: Probing PCI hardware\n"); |
| |
| /* For now, override phys_mem_access_prot. If we need it, |
| * later, we may move that initialization to each ppc_md |
| */ |
| ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; |
| |
| if (pci_probe_only) |
| ppc_pci_flags |= PPC_PCI_PROBE_ONLY; |
| |
| /* Scan all of the recorded PCI controllers. */ |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { |
| scan_phb(hose); |
| pci_bus_add_devices(hose->bus); |
| } |
| |
| /* Call common code to handle resource allocation */ |
| pcibios_resource_survey(); |
| |
| printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| int pcibios_unmap_io_space(struct pci_bus *bus) |
| { |
| struct pci_controller *hose; |
| |
| WARN_ON(bus == NULL); |
| |
| /* If this is not a PHB, we only flush the hash table over |
| * the area mapped by this bridge. We don't play with the PTE |
| * mappings since we might have to deal with sub-page alignemnts |
| * so flushing the hash table is the only sane way to make sure |
| * that no hash entries are covering that removed bridge area |
| * while still allowing other busses overlapping those pages |
| */ |
| if (bus->self) { |
| struct resource *res = bus->resource[0]; |
| |
| DBG("IO unmapping for PCI-PCI bridge %s\n", |
| pci_name(bus->self)); |
| |
| __flush_hash_table_range(&init_mm, res->start + _IO_BASE, |
| res->end - res->start + 1); |
| return 0; |
| } |
| |
| /* Get the host bridge */ |
| hose = pci_bus_to_host(bus); |
| |
| /* Check if we have IOs allocated */ |
| if (hose->io_base_alloc == 0) |
| return 0; |
| |
| DBG("IO unmapping for PHB %s\n", hose->dn->full_name); |
| DBG(" alloc=0x%p\n", hose->io_base_alloc); |
| |
| /* This is a PHB, we fully unmap the IO area */ |
| vunmap(hose->io_base_alloc); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pcibios_unmap_io_space); |
| |
| #endif /* CONFIG_HOTPLUG */ |
| |
| int __devinit pcibios_map_io_space(struct pci_bus *bus) |
| { |
| struct vm_struct *area; |
| unsigned long phys_page; |
| unsigned long size_page; |
| unsigned long io_virt_offset; |
| struct pci_controller *hose; |
| |
| WARN_ON(bus == NULL); |
| |
| /* If this not a PHB, nothing to do, page tables still exist and |
| * thus HPTEs will be faulted in when needed |
| */ |
| if (bus->self) { |
| DBG("IO mapping for PCI-PCI bridge %s\n", |
| pci_name(bus->self)); |
| DBG(" virt=0x%016lx...0x%016lx\n", |
| bus->resource[0]->start + _IO_BASE, |
| bus->resource[0]->end + _IO_BASE); |
| return 0; |
| } |
| |
| /* Get the host bridge */ |
| hose = pci_bus_to_host(bus); |
| phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE); |
| size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE); |
| |
| /* Make sure IO area address is clear */ |
| hose->io_base_alloc = NULL; |
| |
| /* If there's no IO to map on that bus, get away too */ |
| if (hose->pci_io_size == 0 || hose->io_base_phys == 0) |
| return 0; |
| |
| /* Let's allocate some IO space for that guy. We don't pass |
| * VM_IOREMAP because we don't care about alignment tricks that |
| * the core does in that case. Maybe we should due to stupid card |
| * with incomplete address decoding but I'd rather not deal with |
| * those outside of the reserved 64K legacy region. |
| */ |
| area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END); |
| if (area == NULL) |
| return -ENOMEM; |
| hose->io_base_alloc = area->addr; |
| hose->io_base_virt = (void __iomem *)(area->addr + |
| hose->io_base_phys - phys_page); |
| |
| DBG("IO mapping for PHB %s\n", hose->dn->full_name); |
| DBG(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n", |
| hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc); |
| DBG(" size=0x%016lx (alloc=0x%016lx)\n", |
| hose->pci_io_size, size_page); |
| |
| /* Establish the mapping */ |
| if (__ioremap_at(phys_page, area->addr, size_page, |
| _PAGE_NO_CACHE | _PAGE_GUARDED) == NULL) |
| return -ENOMEM; |
| |
| /* Fixup hose IO resource */ |
| io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE; |
| hose->io_resource.start += io_virt_offset; |
| hose->io_resource.end += io_virt_offset; |
| |
| DBG(" hose->io_resource=0x%016lx...0x%016lx\n", |
| hose->io_resource.start, hose->io_resource.end); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pcibios_map_io_space); |
| |
| void __devinit pcibios_setup_new_device(struct pci_dev *dev) |
| { |
| struct dev_archdata *sd = &dev->dev.archdata; |
| |
| sd->of_node = pci_device_to_OF_node(dev); |
| |
| DBG("PCI: device %s OF node: %s\n", pci_name(dev), |
| sd->of_node ? sd->of_node->full_name : "<none>"); |
| |
| sd->dma_ops = pci_dma_ops; |
| #ifdef CONFIG_NUMA |
| sd->numa_node = pcibus_to_node(dev->bus); |
| #else |
| sd->numa_node = -1; |
| #endif |
| if (ppc_md.pci_dma_dev_setup) |
| ppc_md.pci_dma_dev_setup(dev); |
| } |
| EXPORT_SYMBOL(pcibios_setup_new_device); |
| |
| void __devinit pcibios_do_bus_setup(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| |
| if (ppc_md.pci_dma_bus_setup) |
| ppc_md.pci_dma_bus_setup(bus); |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| pcibios_setup_new_device(dev); |
| } |
| |
| unsigned long pci_address_to_pio(phys_addr_t address) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { |
| if (address >= hose->io_base_phys && |
| address < (hose->io_base_phys + hose->pci_io_size)) { |
| unsigned long base = |
| (unsigned long)hose->io_base_virt - _IO_BASE; |
| return base + (address - hose->io_base_phys); |
| } |
| } |
| return (unsigned int)-1; |
| } |
| EXPORT_SYMBOL_GPL(pci_address_to_pio); |
| |
| |
| #define IOBASE_BRIDGE_NUMBER 0 |
| #define IOBASE_MEMORY 1 |
| #define IOBASE_IO 2 |
| #define IOBASE_ISA_IO 3 |
| #define IOBASE_ISA_MEM 4 |
| |
| long sys_pciconfig_iobase(long which, unsigned long in_bus, |
| unsigned long in_devfn) |
| { |
| struct pci_controller* hose; |
| struct list_head *ln; |
| struct pci_bus *bus = NULL; |
| struct device_node *hose_node; |
| |
| /* Argh ! Please forgive me for that hack, but that's the |
| * simplest way to get existing XFree to not lockup on some |
| * G5 machines... So when something asks for bus 0 io base |
| * (bus 0 is HT root), we return the AGP one instead. |
| */ |
| if (machine_is_compatible("MacRISC4")) |
| if (in_bus == 0) |
| in_bus = 0xf0; |
| |
| /* That syscall isn't quite compatible with PCI domains, but it's |
| * used on pre-domains setup. We return the first match |
| */ |
| |
| for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { |
| bus = pci_bus_b(ln); |
| if (in_bus >= bus->number && in_bus <= bus->subordinate) |
| break; |
| bus = NULL; |
| } |
| if (bus == NULL || bus->sysdata == NULL) |
| return -ENODEV; |
| |
| hose_node = (struct device_node *)bus->sysdata; |
| hose = PCI_DN(hose_node)->phb; |
| |
| switch (which) { |
| case IOBASE_BRIDGE_NUMBER: |
| return (long)hose->first_busno; |
| case IOBASE_MEMORY: |
| return (long)hose->pci_mem_offset; |
| case IOBASE_IO: |
| return (long)hose->io_base_phys; |
| case IOBASE_ISA_IO: |
| return (long)isa_io_base; |
| case IOBASE_ISA_MEM: |
| return -EINVAL; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| #ifdef CONFIG_NUMA |
| int pcibus_to_node(struct pci_bus *bus) |
| { |
| struct pci_controller *phb = pci_bus_to_host(bus); |
| return phb->node; |
| } |
| EXPORT_SYMBOL(pcibus_to_node); |
| #endif |