Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: call touch_softlockup_watchdog on resume
kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 89c7f32..53449cb 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -46,7 +46,7 @@
45 -> Pinnacle PCTV DVB-T (em2870)
46 -> Compro, VideoMate U3 (em2870) [185b:2870]
47 -> KWorld DVB-T 305U (em2880) [eb1a:e305]
- 48 -> KWorld DVB-T 310U (em2880)
+ 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310]
49 -> MSI DigiVox A/D (em2880) [eb1a:e310]
50 -> MSI DigiVox A/D II (em2880) [eb1a:e320]
51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 0f03900..9a3e4d7 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -190,6 +190,7 @@
pac7311 093a:2621 PAC731x
pac7311 093a:2624 PAC7302
pac7311 093a:2626 Labtec 2200
+pac7311 093a:262a Webcam 300k
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c930b8c..1e06d23 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -211,6 +211,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
@@ -1499,6 +1500,18 @@
"exit" syscall notifying other kernel modules the SP program is
exiting. You probably want to say yes here.
+config MIPS_CMP
+ bool "MIPS CMP framework support"
+ depends on SYS_SUPPORTS_MIPS_CMP
+ select SYNC_R4K if BROKEN
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_SCHED_SMT if SMP
+ select WEAK_ORDERING
+ default n
+ help
+ This is a placeholder option for the GCMP work. It will need to
+ be handled differently...
+
config SB1_PASS_1_WORKAROUNDS
bool
depends on CPU_SB1_PASS_1
@@ -1675,6 +1688,9 @@
config SMP_UP
bool
+config SYS_SUPPORTS_MIPS_CMP
+ bool
+
config SYS_SUPPORTS_SMP
bool
@@ -1722,17 +1738,6 @@
performance should round up your number of processors to the next
power of two.
-config MIPS_CMP
- bool "MIPS CMP framework support"
- depends on SMP
- select SYNC_R4K
- select SYS_SUPPORTS_SCHED_SMT
- select WEAK_ORDERING
- default n
- help
- This is a placeholder option for the GCMP work. It will need to
- be handled differently...
-
source "kernel/time/Kconfig"
#
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 3613645..492a0a8 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,6 +22,7 @@
#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/page.h>
+#include <asm/pgtable-bits.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index f18ba92..7b45f19 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
-obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y := platform.o setup.o rtc_xicor1241.o \
+ rtc_m41t81.o
obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
new file mode 100644
index 0000000..dd0e5b9
--- /dev/null
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,81 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME "pata-swarm"
+
+#define SWARM_IDE_SHIFT 5
+#define SWARM_IDE_BASE 0x1f0
+#define SWARM_IDE_CTRL 0x3f6
+
+static struct resource swarm_pata_resource[] = {
+ {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_IRQ,
+ .start = K_INT_GB_IDE,
+ .end = K_INT_GB_IDE,
+ },
+};
+
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = SWARM_IDE_SHIFT,
+};
+
+static struct platform_device swarm_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .resource = swarm_pata_resource,
+ .num_resources = ARRAY_SIZE(swarm_pata_resource),
+ .dev = {
+ .platform_data = &pata_platform_data,
+ .coherent_dma_mask = ~0, /* grumble */
+ },
+};
+
+static int __init swarm_pata_init(void)
+{
+ u8 __iomem *base;
+ phys_t offset, size;
+ struct resource *r;
+
+ if (!SIBYTE_HAVE_IDE)
+ return -ENODEV;
+
+ base = ioremap(A_IO_EXT_BASE, 0x800);
+ offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+ size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+ iounmap(base);
+
+ offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+ size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+ if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+ pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
+
+ return -EBUSY;
+ }
+
+ pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
+
+ r = swarm_pata_resource;
+ r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
+ r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
+ r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
+ r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
+
+ return platform_device_register(&swarm_pata_device);
+}
+
+device_initcall(swarm_pata_init);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index bfd10fd..c102af8 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1605,6 +1605,14 @@
*/
{
.callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP nx6115 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
.ident = "HP NX6125 laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
@@ -1619,6 +1627,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP 6715b laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+ },
+ },
{}
};
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 49285f8..be33a54 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -626,7 +626,6 @@
struct pci_dev *dev;
void *gatt;
int i, error;
- unsigned long start_pfn, end_pfn;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
@@ -672,12 +671,6 @@
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
aper_base, aper_size>>10);
- /* need to map that range */
- end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
- if (end_pfn > max_low_pfn_mapped) {
- start_pfn = (aper_base>>PAGE_SHIFT);
- init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
- }
return 0;
nommu:
@@ -727,7 +720,8 @@
{
struct agp_kern_info info;
unsigned long iommu_start;
- unsigned long aper_size;
+ unsigned long aper_base, aper_size;
+ unsigned long start_pfn, end_pfn;
unsigned long scratch;
long i;
@@ -765,8 +759,16 @@
return;
}
+ /* need to map that range */
+ aper_size = info.aper_size << 20;
+ aper_base = info.aper_base;
+ end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+ if (end_pfn > max_low_pfn_mapped) {
+ start_pfn = (aper_base>>PAGE_SHIFT);
+ init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+ }
+
printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
- aper_size = info.aper_size * 1024 * 1024;
iommu_size = check_iommu_size(info.aper_base, aper_size);
iommu_pages = iommu_size >> PAGE_SHIFT;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 8e93a79..052879a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -780,10 +780,6 @@
to transfer data to and from memory. Saying Y is safe and improves
performance.
-config BLK_DEV_IDE_SWARM
- tristate "IDE for Sibyte evaluation boards"
- depends on SIBYTE_SB1xxx_SOC
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 49a8c58..f16bb46 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1661,7 +1661,9 @@
cdi->mask &= ~CDC_PLAY_AUDIO;
mechtype = buf[8 + 6] >> 5;
- if (mechtype == mechtype_caddy || mechtype == mechtype_popup)
+ if (mechtype == mechtype_caddy ||
+ mechtype == mechtype_popup ||
+ (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
cdi->mask |= CDC_CLOSE_TRAY;
if (cdi->sanyo_slot > 0) {
@@ -1859,6 +1861,8 @@
{ "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
{ "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
{ "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
{ NULL, NULL, 0 }
};
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index adc6827..3fa07c0 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -211,7 +211,7 @@
xcount = bcount & 0xffff;
if (is_trm290)
xcount = ((xcount >> 2) - 1) << 16;
- if (xcount == 0x0000) {
+ else if (xcount == 0x0000) {
/*
* Most chipsets correctly interpret a length of 0x0000 as 64KB,
* but at least one (e.g. CS5530) misinterprets it as zero (!).
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 994e410..a51a30e 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1492,7 +1492,7 @@
static int ide_sysfs_register_port(ide_hwif_t *hwif)
{
- int i, rc;
+ int i, uninitialized_var(rc);
for (i = 0; ide_port_attrs[i]; i++) {
rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile
index 677c7b2..5873fa0 100644
--- a/drivers/ide/mips/Makefile
+++ b/drivers/ide/mips/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o
obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
deleted file mode 100644
index 39c9ee9..0000000
--- a/drivers/ide/mips/swarm.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
- * Author: Maciej W. Rozycki <macro@mips.com>
- * Copyright (c) 2006, 2008 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Derived loosely from ide-pmac.c, so:
- * Copyright (C) 1998 Paul Mackerras.
- * Copyright (C) 1995-1998 Mark Lord
- */
-
-/*
- * Boards with SiByte processors so far have supported IDE devices via
- * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all
- * cases, byte-swapping must be avoided for these devices (whereas
- * other PCI devices, for example, will require swapping). Any
- * SiByte-targetted kernel including IDE support will include this
- * file. Probing of a Generic Bus for an IDE device is controlled by
- * the definition of "SIBYTE_HAVE_IDE", which is provided by
- * <asm/sibyte/board.h> for Broadcom boards.
- */
-
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-
-#include <asm/sibyte/board.h>
-#include <asm/sibyte/sb1250_genbus.h>
-#include <asm/sibyte/sb1250_regs.h>
-
-#define DRV_NAME "ide-swarm"
-
-static char swarm_ide_string[] = DRV_NAME;
-
-static struct resource swarm_ide_resource = {
- .name = "SWARM GenBus IDE",
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device *swarm_ide_dev;
-
-static const struct ide_port_info swarm_port_info = {
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-};
-
-/*
- * swarm_ide_probe - if the board header indicates the existence of
- * Generic Bus IDE, allocate a HWIF for it.
- */
-static int __devinit swarm_ide_probe(struct device *dev)
-{
- u8 __iomem *base;
- struct ide_host *host;
- phys_t offset, size;
- int i, rc;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
- if (!SIBYTE_HAVE_IDE)
- return -ENODEV;
-
- base = ioremap(A_IO_EXT_BASE, 0x800);
- offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
- size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
- iounmap(base);
-
- offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
- size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
- if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
- printk(KERN_INFO DRV_NAME
- ": IDE interface at GenBus disabled\n");
- return -EBUSY;
- }
-
- printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
- IDE_CS);
-
- swarm_ide_resource.start = offset;
- swarm_ide_resource.end = offset + size - 1;
- if (request_resource(&iomem_resource, &swarm_ide_resource)) {
- printk(KERN_ERR DRV_NAME
- ": can't request I/O memory resource\n");
- return -EBUSY;
- }
-
- base = ioremap(offset, size);
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i <= 7; i++)
- hw.io_ports_array[i] =
- (unsigned long)(base + ((0x1f0 + i) << 5));
- hw.io_ports.ctl_addr =
- (unsigned long)(base + (0x3f6 << 5));
- hw.irq = K_INT_GB_IDE;
- hw.chipset = ide_generic;
-
- rc = ide_host_add(&swarm_port_info, hws, &host);
- if (rc)
- goto err;
-
- dev_set_drvdata(dev, host);
-
- return 0;
-err:
- release_resource(&swarm_ide_resource);
- iounmap(base);
- return rc;
-}
-
-static struct device_driver swarm_ide_driver = {
- .name = swarm_ide_string,
- .bus = &platform_bus_type,
- .probe = swarm_ide_probe,
-};
-
-static void swarm_ide_platform_release(struct device *device)
-{
- struct platform_device *pldev;
-
- /* free device */
- pldev = to_platform_device(device);
- kfree(pldev);
-}
-
-static int __devinit swarm_ide_init_module(void)
-{
- struct platform_device *pldev;
- int err;
-
- printk(KERN_INFO "SWARM IDE driver\n");
-
- if (driver_register(&swarm_ide_driver)) {
- printk(KERN_ERR "Driver registration failed\n");
- err = -ENODEV;
- goto out;
- }
-
- if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) {
- err = -ENOMEM;
- goto out_unregister_driver;
- }
-
- pldev->name = swarm_ide_string;
- pldev->id = 0;
- pldev->dev.release = swarm_ide_platform_release;
-
- if (platform_device_register(pldev)) {
- err = -ENODEV;
- goto out_free_pldev;
- }
-
- if (!pldev->dev.driver) {
- /*
- * The driver was not bound to this device, there was
- * no hardware at this address. Unregister it, as the
- * release fuction will take care of freeing the
- * allocated structure
- */
- platform_device_unregister (pldev);
- }
-
- swarm_ide_dev = pldev;
-
- return 0;
-
-out_free_pldev:
- kfree(pldev);
-
-out_unregister_driver:
- driver_unregister(&swarm_ide_driver);
-out:
- return err;
-}
-
-module_init(swarm_ide_init_module);
diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
index 216025c..2c5b628 100644
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -10,6 +10,7 @@
#include "dvb_frontend.h"
#define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
+#define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw"
/* Dmoduler IF (kHz) */
#define XC3028_FE_DEFAULT 0 /* Don't load SCODE */
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 4eed783..a127a41 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -491,6 +491,7 @@
.demod_address = 0x53,
.invert = 1,
.repeated_start_workaround = 1,
+ .serial_mpeg = 1,
};
static struct itd1000_config skystar2_rev2_7_itd1000_config = {
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 069d847..0c733c6 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,15 +364,16 @@
enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = filter->priv;
+ unsigned long flags;
int ret;
if (dmxdevfilter->buffer.error) {
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
- spin_lock(&dmxdevfilter->dev->lock);
+ spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
if (dmxdevfilter->state != DMXDEV_STATE_GO) {
- spin_unlock(&dmxdevfilter->dev->lock);
+ spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
return 0;
}
del_timer(&dmxdevfilter->timer);
@@ -391,7 +392,7 @@
}
if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
dmxdevfilter->state = DMXDEV_STATE_DONE;
- spin_unlock(&dmxdevfilter->dev->lock);
+ spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
@@ -403,11 +404,12 @@
{
struct dmxdev_filter *dmxdevfilter = feed->priv;
struct dvb_ringbuffer *buffer;
+ unsigned long flags;
int ret;
- spin_lock(&dmxdevfilter->dev->lock);
+ spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
- spin_unlock(&dmxdevfilter->dev->lock);
+ spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
return 0;
}
@@ -417,7 +419,7 @@
else
buffer = &dmxdevfilter->dev->dvr_buffer;
if (buffer->error) {
- spin_unlock(&dmxdevfilter->dev->lock);
+ spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
wake_up(&buffer->queue);
return 0;
}
@@ -428,7 +430,7 @@
dvb_ringbuffer_flush(buffer);
buffer->error = ret;
}
- spin_unlock(&dmxdevfilter->dev->lock);
+ spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
wake_up(&buffer->queue);
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index e2eca0b..a2c1fd5 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,7 +399,9 @@
void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
size_t count)
{
- spin_lock(&demux->lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&demux->lock, flags);
while (count--) {
if (buf[0] == 0x47)
@@ -407,16 +409,17 @@
buf += 188;
}
- spin_unlock(&demux->lock);
+ spin_unlock_irqrestore(&demux->lock, flags);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
{
+ unsigned long flags;
int p = 0, i, j;
- spin_lock(&demux->lock);
+ spin_lock_irqsave(&demux->lock, flags);
if (demux->tsbufp) {
i = demux->tsbufp;
@@ -449,17 +452,18 @@
}
bailout:
- spin_unlock(&demux->lock);
+ spin_unlock_irqrestore(&demux->lock, flags);
}
EXPORT_SYMBOL(dvb_dmx_swfilter);
void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
{
+ unsigned long flags;
int p = 0, i, j;
u8 tmppack[188];
- spin_lock(&demux->lock);
+ spin_lock_irqsave(&demux->lock, flags);
if (demux->tsbufp) {
i = demux->tsbufp;
@@ -500,7 +504,7 @@
}
bailout:
- spin_unlock(&demux->lock);
+ spin_unlock_irqrestore(&demux->lock, flags);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_204);
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 747d3fa..2e9fd28 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -59,7 +59,7 @@
* it does not support repeated-start, workaround: write addr-1
* and then read
*/
- u8 shadow[255];
+ u8 shadow[256];
};
static u32 s5h1420_getsymbolrate(struct s5h1420_state* state);
@@ -94,8 +94,11 @@
if (ret != 3)
return ret;
} else {
- ret = i2c_transfer(state->i2c, &msg[1], 2);
- if (ret != 2)
+ ret = i2c_transfer(state->i2c, &msg[1], 1);
+ if (ret != 1)
+ return ret;
+ ret = i2c_transfer(state->i2c, &msg[2], 1);
+ if (ret != 1)
return ret;
}
@@ -823,7 +826,7 @@
struct s5h1420_state* state = fe->demodulator_priv;
/* disable power down and do reset */
- state->CON_1_val = 0x10;
+ state->CON_1_val = state->config->serial_mpeg << 4;
s5h1420_writereg(state, 0x02, state->CON_1_val);
msleep(10);
s5h1420_reset(state);
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index 4c913f1..ff30813 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -32,10 +32,12 @@
u8 demod_address;
/* does the inversion require inversion? */
- u8 invert : 1;
+ u8 invert:1;
- u8 repeated_start_workaround : 1;
- u8 cdclk_polarity : 1; /* 1 == falling edge, 0 == raising edge */
+ u8 repeated_start_workaround:1;
+ u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */
+
+ u8 serial_mpeg:1;
};
#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index cc5efb6..9da260f 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -40,6 +40,8 @@
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B },
{ USB_DEVICE(0x2040, 0x5500),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0x5510),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5580),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5590),
@@ -87,7 +89,7 @@
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
},
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
- .name = "Hauppauge WinTV-Nova-T-MiniStick",
+ .name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
},
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 6ae4cc8..933eaef 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3431,7 +3431,7 @@
dprintk("bttv: open minor=%d\n",minor);
for (i = 0; i < bttv_num; i++) {
- if (bttvs[i].radio_dev->minor == minor) {
+ if (bttvs[i].radio_dev && bttvs[i].radio_dev->minor == minor) {
btv = &bttvs[i];
break;
}
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index c149b7d..5405c30 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
+#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c
index a4574740..a8a1990 100644
--- a/drivers/media/video/cpia2/cpia2_usb.c
+++ b/drivers/media/video/cpia2/cpia2_usb.c
@@ -632,7 +632,7 @@
static int submit_urbs(struct camera_data *cam)
{
struct urb *urb;
- int fx, err, i;
+ int fx, err, i, j;
for(i=0; i<NUM_SBUF; ++i) {
if (cam->sbuf[i].data)
@@ -657,6 +657,9 @@
}
urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
if (!urb) {
+ ERR("%s: usb_alloc_urb error!\n", __func__);
+ for (j = 0; j < i; j++)
+ usb_free_urb(cam->sbuf[j].urb);
return -ENOMEM;
}
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 8fe5f38..3cb9734 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -163,7 +163,7 @@
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX18_AV_AUDIO8, 0 },
+ CX18_AV_AUDIO5, 0 },
{ CX18_CARD_INPUT_LINE_IN1,
CX18_AV_AUDIO_SERIAL1, 0 },
},
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 9a1374a..6b92206 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1070,6 +1070,7 @@
err = drv->request_acquire(drv);
if(err != 0) {
dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err);
+ unlock_kernel();
return err;
}
}
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 3c00610..ac3292d 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -117,10 +117,10 @@
if (oldptr + length >= runtime->buffer_size) {
unsigned int cnt =
- runtime->buffer_size - oldptr - 1;
+ runtime->buffer_size - oldptr;
memcpy(runtime->dma_area + oldptr * stride, cp,
cnt * stride);
- memcpy(runtime->dma_area, cp + cnt,
+ memcpy(runtime->dma_area, cp + cnt * stride,
length * stride - cnt * stride);
} else {
memcpy(runtime->dma_area + oldptr * stride, cp,
@@ -161,8 +161,14 @@
memset(dev->adev->transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
- if (!urb)
+ if (!urb) {
+ em28xx_errdev("usb_alloc_urb failed!\n");
+ for (j = 0; j < i; j++) {
+ usb_free_urb(dev->adev->urb[j]);
+ kfree(dev->adev->transfer_buffer[j]);
+ }
return -ENOMEM;
+ }
urb->dev = dev->udev;
urb->context = dev;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 452da70..de943cf 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -93,28 +93,6 @@
.amux = 0,
} },
},
- [EM2800_BOARD_KWORLD_USB2800] = {
- .name = "Kworld USB2800",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .is_em2800 = 1,
- .vchannels = 3,
- .tuner_type = TUNER_PHILIPS_FCV1236D,
- .tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
- .type = EM28XX_VMUX_TELEVISION,
- .vmux = SAA7115_COMPOSITE2,
- .amux = 0,
- }, {
- .type = EM28XX_VMUX_COMPOSITE1,
- .vmux = SAA7115_COMPOSITE0,
- .amux = 1,
- }, {
- .type = EM28XX_VMUX_SVIDEO,
- .vmux = SAA7115_SVIDEO3,
- .amux = 1,
- } },
- },
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Kworld PVR TV 2800 RF",
.is_em2800 = 0,
@@ -599,7 +577,7 @@
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = 3,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
@@ -952,22 +930,23 @@
},
[EM2880_BOARD_KWORLD_DVB_310U] = {
.name = "KWorld DVB-T 310U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .has_dvb = 1,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
- }, {
+ .amux = EM28XX_AMUX_AC97_LINE_IN,
+ }, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_AC97_LINE_IN,
} },
},
[EM2881_BOARD_DNT_DA2_HYBRID] = {
@@ -1282,6 +1261,7 @@
static struct em28xx_hash_table em28xx_eeprom_hash [] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
+ {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -1552,9 +1532,12 @@
/* djh - Not sure which demod we need here */
ctl->demod = XC3028_FE_DEFAULT;
break;
+ case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+ ctl->demod = XC3028_FE_DEFAULT;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
- case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
/* FIXME: Better to specify the needed IF */
ctl->demod = XC3028_FE_DEFAULT;
break;
@@ -1764,6 +1747,20 @@
break;
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
+ /*
+ * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the K-WORLD
+ * and if it is found then we decide that we do not have
+ * a DIGIVOX and reset the device to the K-WORLD instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
break;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 4b992bc..d2b1a1a 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -452,6 +452,15 @@
goto out_free;
}
break;
+ case EM2880_BOARD_KWORLD_DVB_310U:
+ dvb->frontend = dvb_attach(zl10353_attach,
+ &em28xx_zl10353_with_xc3028,
+ &dev->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n",
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 7be6928..ac95c55 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -459,6 +459,7 @@
urb = usb_alloc_urb(npkt, GFP_KERNEL);
if (!urb) {
err("usb_alloc_urb failed");
+ destroy_urbs(gspca_dev);
return -ENOMEM;
}
urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
@@ -468,8 +469,8 @@
if (urb->transfer_buffer == NULL) {
usb_free_urb(urb);
- destroy_urbs(gspca_dev);
err("usb_buffer_urb failed");
+ destroy_urbs(gspca_dev);
return -ENOMEM;
}
gspca_dev->urb[n] = urb;
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index d4be518..ba865b7 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -1063,6 +1063,7 @@
{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
{USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
{USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5dd78c6..12b81ae 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -232,7 +232,7 @@
static struct v4l2_pix_format vga_mode[] = {
{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120 * 5 / 4,
+ .sizeimage = 160 * 120,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 2 | MODE_RAW},
{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
@@ -264,7 +264,7 @@
.priv = 1 | MODE_REDUCED_SIF},
{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
.bytesperline = 176,
- .sizeimage = 176 * 144 * 5 / 4,
+ .sizeimage = 176 * 144,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1 | MODE_RAW},
{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index d75b1d2..572b0f3 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -707,6 +707,7 @@
0x08, 0, /* value, index */
gspca_dev->usb_buf, 8,
500);
+ msleep(2);
}
/* read 5 bytes in gspca_dev->usb_buf */
@@ -976,13 +977,13 @@
case BRIDGE_SN9C105:
if (regF1 != 0x11)
return -ENODEV;
- reg_w(gspca_dev, 0x02, regGpio, 2);
+ reg_w(gspca_dev, 0x01, regGpio, 2);
break;
case BRIDGE_SN9C120:
if (regF1 != 0x12)
return -ENODEV;
regGpio[1] = 0x70;
- reg_w(gspca_dev, 0x02, regGpio, 2);
+ reg_w(gspca_dev, 0x01, regGpio, 2);
break;
default:
/* case BRIDGE_SN9C110: */
@@ -1183,7 +1184,7 @@
static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */
static const __u8 CE_ov76xx[] =
- { 0x32, 0xdd, 0x32, 0xdd }; /* OV7630/48 */
+ { 0x32, 0xdd, 0x32, 0xdd };
sn9c1xx = sn_tb[(int) sd->sensor];
configure_gpio(gspca_dev, sn9c1xx);
@@ -1223,8 +1224,15 @@
reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
for (i = 0; i < 8; i++)
reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+ switch (sd->sensor) {
+ case SENSOR_OV7660:
+ reg_w1(gspca_dev, 0x9a, 0x05);
+ break;
+ default:
reg_w1(gspca_dev, 0x9a, 0x08);
reg_w1(gspca_dev, 0x99, 0x59);
+ break;
+ }
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
if (mode)
@@ -1275,8 +1283,8 @@
/* reg1 = 0x44; */
/* reg1 = 0x46; (done) */
} else {
- reg17 = 0x22; /* 640 MCKSIZE */
- reg1 = 0x06;
+ reg17 = 0xa2; /* 640 */
+ reg1 = 0x44;
}
break;
}
@@ -1285,6 +1293,7 @@
switch (sd->sensor) {
case SENSOR_OV7630:
case SENSOR_OV7648:
+ case SENSOR_OV7660:
reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
break;
default:
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index cfbc9eb..95fcfcb 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -225,7 +225,7 @@
reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
do {
reg_r(gspca_dev, 0x8803, 1);
- if (!gspca_dev->usb_buf)
+ if (!gspca_dev->usb_buf[0])
break;
} while (--retry);
if (retry == 0)
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 8d7c27e..d61ef72 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6576,8 +6576,8 @@
cs2102_60HZ, cs2102_60HZScale},
/* SENSOR_CS2102K 1 */
{cs2102_NoFliker, cs2102_NoFlikerScale,
- cs2102_50HZ, cs2102_50HZScale,
- cs2102_60HZ, cs2102_60HZScale},
+ NULL, NULL, /* currently disabled */
+ NULL, NULL},
/* SENSOR_GC0305 2 */
{gc0305_NoFliker, gc0305_NoFliker,
gc0305_50HZ, gc0305_50HZ,
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 3d3c48d..c685240 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -3591,7 +3591,7 @@
ov51x_init_isoc(struct usb_ov511 *ov)
{
struct urb *urb;
- int fx, err, n, size;
+ int fx, err, n, i, size;
PDEBUG(3, "*** Initializing capture ***");
@@ -3662,6 +3662,8 @@
urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
if (!urb) {
err("init isoc: usb_alloc_urb ret. NULL");
+ for (i = 0; i < n; i++)
+ usb_free_urb(ov->sbuf[i].urb);
return -ENOMEM;
}
ov->sbuf[n].urb = urb;
@@ -5651,7 +5653,7 @@
if (!ov->dev)
return -ENODEV;
sensor_get_exposure(ov, &exp);
- return sprintf(buf, "%d\n", exp >> 8);
+ return sprintf(buf, "%d\n", exp);
}
static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 88e1751..cbe2a34 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -489,6 +489,8 @@
struct usb_device_id pvr2_device_table[] = {
{ USB_DEVICE(0x2040, 0x2900),
.driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
+ { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
+ .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
{ USB_DEVICE(0x2040, 0x2400),
.driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
{ USB_DEVICE(0x1164, 0x0622),
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index b1d09d8..92b83fe 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -669,7 +669,7 @@
(unsigned long)vbuf, pos);
/* tell v4l buffer was filled */
- buf->vb.field_count++;
+ buf->vb.field_count = dev->frame_count[chn] * 2;
do_gettimeofday(&ts);
buf->vb.ts = ts;
buf->vb.state = VIDEOBUF_DONE;
@@ -1268,6 +1268,7 @@
dev->last_frame[chn] = -1;
dev->bad_payload[chn] = 0;
dev->cur_frame[chn] = 0;
+ dev->frame_count[chn] = 0;
for (j = 0; j < SYS_FRAMES; j++) {
dev->buffer[chn].frame[j].ulState = 0;
dev->buffer[chn].frame[j].cur_size = 0;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 6ef3e52..feab12a 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -592,7 +592,7 @@
if (ctrl == NULL)
return -EINVAL;
- data = kmalloc(8, GFP_KERNEL);
+ data = kmalloc(ctrl->info->size, GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 168baab..11edf79 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -911,7 +911,6 @@
for (i = 0; i < W9968CF_URBS; i++) {
urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
- cam->urb[i] = urb;
if (!urb) {
for (j = 0; j < i; j++)
usb_free_urb(cam->urb[j]);
@@ -919,6 +918,7 @@
return -ENOMEM;
}
+ cam->urb[i] = urb;
urb->dev = udev;
urb->context = (void*)cam;
urb->pipe = usb_rcvisocpipe(udev, 1);
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index 95c79ad..54ac3fe 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -274,10 +274,8 @@
client->addr << 1, client->adapter->name);
state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL);
- if (state == NULL) {
- kfree(client);
+ if (state == NULL)
return -ENOMEM;
- }
state->vol_l = 0x17; /* 0dB */
state->vol_r = 0x17; /* 0dB */
state->muted = 0;
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index d842a7c..3282be7 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -988,7 +988,7 @@
zr->v4l_grab_seq = 0;
zr->v4l_settings.width = 192;
zr->v4l_settings.height = 144;
- zr->v4l_settings.format = &zoran_formats[4]; /* YUY2 - YUV-4:2:2 packed */
+ zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */
zr->v4l_settings.bytesperline =
zr->v4l_settings.width *
((zr->v4l_settings.format->depth + 7) / 8);
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index ec6f596..2dab9ee 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -134,7 +134,7 @@
}, {
.name = "16-bit RGB BE",
ZFMT(-1,
- V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB),
+ V4L2_PIX_FMT_RGB565X, V4L2_COLORSPACE_SRGB),
.depth = 16,
.flags = ZORAN_FORMAT_CAPTURE |
ZORAN_FORMAT_OVERLAY,
@@ -2737,7 +2737,8 @@
fh->v4l_settings.format->fourcc;
fmt->fmt.pix.colorspace =
fh->v4l_settings.format->colorspace;
- fmt->fmt.pix.bytesperline = 0;
+ fmt->fmt.pix.bytesperline =
+ fh->v4l_settings.bytesperline;
if (BUZ_MAX_HEIGHT <
(fh->v4l_settings.height * 2))
fmt->fmt.pix.field =
@@ -2833,13 +2834,6 @@
fmt->fmt.pix.pixelformat,
(char *) &printformat);
- if (fmt->fmt.pix.bytesperline > 0) {
- dprintk(5,
- KERN_ERR "%s: bpl not supported\n",
- ZR_DEVNAME(zr));
- return -EINVAL;
- }
-
/* we can be requested to do JPEG/raw playback/capture */
if (!
(fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ||
@@ -2923,6 +2917,7 @@
fh->jpg_buffers.buffer_size =
zoran_v4l2_calc_bufsize(&fh->
jpg_settings);
+ fmt->fmt.pix.bytesperline = 0;
fmt->fmt.pix.sizeimage =
fh->jpg_buffers.buffer_size;
@@ -2979,6 +2974,8 @@
/* tell the user the
* results/missing stuff */
+ fmt->fmt.pix.bytesperline =
+ fh->v4l_settings.bytesperline;
fmt->fmt.pix.sizeimage =
fh->v4l_settings.height *
fh->v4l_settings.bytesperline;
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 917035e..0000896 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -426,8 +426,6 @@
host->sg = NULL;
host->data = data;
- mci_writel(host, BLKR, MCI_BCNT(data->blocks)
- | MCI_BLKLEN(data->blksz));
dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
@@ -483,6 +481,10 @@
if (data->blocks > 1 && data->blksz & 3)
goto fail;
atmci_set_timeout(host, data);
+
+ /* Must set block count/size before sending command */
+ mci_writel(host, BLKR, MCI_BCNT(data->blocks)
+ | MCI_BLKLEN(data->blksz));
}
iflags = MCI_CMDRDY;
diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h
index c3dd5d0..721496a 100644
--- a/include/asm-mips/sn/mapped_kernel.h
+++ b/include/asm-mips/sn/mapped_kernel.h
@@ -5,6 +5,8 @@
#ifndef __ASM_SN_MAPPED_KERNEL_H
#define __ASM_SN_MAPPED_KERNEL_H
+#include <linux/mmzone.h>
+
/*
* Note on how mapped kernels work: the text and data section is
* compiled at cksseg segment (LOADADDR = 0xc001c000), and the
@@ -29,10 +31,8 @@
#define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE)
#define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216)
-#define MAPPED_KERN_RO_PHYSBASE(n) \
- (PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr)
-#define MAPPED_KERN_RW_PHYSBASE(n) \
- (PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr)
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
#define MAPPED_KERN_RO_TO_PHYS(x) \
((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 1524829..6514db8 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -366,7 +366,9 @@
/* Currently on a filemark */
IDE_AFLAG_FILEMARK = (1 << 25),
/* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDE_AFLAG_MEDIUM_PRESENT = (1 << 26)
+ IDE_AFLAG_MEDIUM_PRESENT = (1 << 26),
+
+ IDE_AFLAG_NO_AUTOCLOSE = (1 << 27),
};
struct ide_drive_s {
