| /* |
| * ACPI PCI Hot Plug Controller Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com) |
| * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com) |
| * Copyright (C) 2002,2003 NEC Corporation |
| * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com) |
| * Copyright (C) 2003-2005 Hewlett Packard |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <kristen.c.accardi@intel.com> |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <linux/slab.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include "acpiphp.h" |
| |
| #define MY_NAME "acpiphp" |
| |
| static int debug; |
| int acpiphp_debug; |
| |
| /* local variables */ |
| static int num_slots; |
| static struct acpiphp_attention_info *attention_info; |
| |
| #define DRIVER_VERSION "0.5" |
| #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>, Matthew Wilcox <willy@hp.com>" |
| #define DRIVER_DESC "ACPI Hot Plug PCI Controller Driver" |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); |
| module_param(debug, bool, 0644); |
| |
| /* export the attention callback registration methods */ |
| EXPORT_SYMBOL_GPL(acpiphp_register_attention); |
| EXPORT_SYMBOL_GPL(acpiphp_unregister_attention); |
| |
| static int enable_slot (struct hotplug_slot *slot); |
| static int disable_slot (struct hotplug_slot *slot); |
| static int set_attention_status (struct hotplug_slot *slot, u8 value); |
| static int get_power_status (struct hotplug_slot *slot, u8 *value); |
| static int get_attention_status (struct hotplug_slot *slot, u8 *value); |
| static int get_address (struct hotplug_slot *slot, u32 *value); |
| static int get_latch_status (struct hotplug_slot *slot, u8 *value); |
| static int get_adapter_status (struct hotplug_slot *slot, u8 *value); |
| |
| static struct hotplug_slot_ops acpi_hotplug_slot_ops = { |
| .owner = THIS_MODULE, |
| .enable_slot = enable_slot, |
| .disable_slot = disable_slot, |
| .set_attention_status = set_attention_status, |
| .get_power_status = get_power_status, |
| .get_attention_status = get_attention_status, |
| .get_latch_status = get_latch_status, |
| .get_adapter_status = get_adapter_status, |
| .get_address = get_address, |
| }; |
| |
| |
| /** |
| * acpiphp_register_attention - set attention LED callback |
| * @info: must be completely filled with LED callbacks |
| * |
| * Description: this is used to register a hardware specific ACPI |
| * driver that manipulates the attention LED. All the fields in |
| * info must be set. |
| **/ |
| int acpiphp_register_attention(struct acpiphp_attention_info *info) |
| { |
| int retval = -EINVAL; |
| |
| if (info && info->owner && info->set_attn && |
| info->get_attn && !attention_info) { |
| retval = 0; |
| attention_info = info; |
| } |
| return retval; |
| } |
| |
| |
| /** |
| * acpiphp_unregister_attention - unset attention LED callback |
| * @info: must match the pointer used to register |
| * |
| * Description: this is used to un-register a hardware specific acpi |
| * driver that manipulates the attention LED. The pointer to the |
| * info struct must be the same as the one used to set it. |
| **/ |
| int acpiphp_unregister_attention(struct acpiphp_attention_info *info) |
| { |
| int retval = -EINVAL; |
| |
| if (info && attention_info == info) { |
| attention_info = NULL; |
| retval = 0; |
| } |
| return retval; |
| } |
| |
| |
| /** |
| * enable_slot - power on and enable a slot |
| * @hotplug_slot: slot to enable |
| * |
| * Actual tasks are done in acpiphp_enable_slot() |
| * |
| */ |
| static int enable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| /* enable the specified slot */ |
| return acpiphp_enable_slot(slot->acpi_slot); |
| } |
| |
| |
| /** |
| * disable_slot - disable and power off a slot |
| * @hotplug_slot: slot to disable |
| * |
| * Actual tasks are done in acpiphp_disable_slot() |
| * |
| */ |
| static int disable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| /* disable the specified slot */ |
| return acpiphp_disable_slot(slot->acpi_slot); |
| } |
| |
| |
| /** |
| * set_attention_status - set attention LED |
| * @hotplug_slot: slot to set attention LED on |
| * @status: value to set attention LED to (0 or 1) |
| * |
| * attention status LED, so we use a callback that |
| * was registered with us. This allows hardware specific |
| * ACPI implementations to blink the light for us. |
| **/ |
| static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) |
| { |
| int retval = -ENODEV; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| if (attention_info && try_module_get(attention_info->owner)) { |
| retval = attention_info->set_attn(hotplug_slot, status); |
| module_put(attention_info->owner); |
| } else |
| attention_info = NULL; |
| return retval; |
| } |
| |
| |
| /** |
| * get_power_status - get power status of a slot |
| * @hotplug_slot: slot to get status |
| * @value: pointer to store status |
| * |
| * Some platforms may not implement _STA method properly. |
| * In that case, the value returned may not be reliable. |
| * |
| */ |
| static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| *value = acpiphp_get_power_status(slot->acpi_slot); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * get_attention_status - get attention LED status |
| * @hotplug_slot: slot to get status from |
| * @value: returns with value of attention LED |
| * |
| * ACPI doesn't have known method to determine the state |
| * of the attention status LED, so we use a callback that |
| * was registered with us. This allows hardware specific |
| * ACPI implementations to determine its state |
| **/ |
| static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| int retval = -EINVAL; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| if (attention_info && try_module_get(attention_info->owner)) { |
| retval = attention_info->get_attn(hotplug_slot, value); |
| module_put(attention_info->owner); |
| } else |
| attention_info = NULL; |
| return retval; |
| } |
| |
| |
| /** |
| * get_latch_status - get latch status of a slot |
| * @hotplug_slot: slot to get status |
| * @value: pointer to store status |
| * |
| * ACPI doesn't provide any formal means to access latch status. |
| * Instead, we fake latch status from _STA |
| * |
| */ |
| static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| *value = acpiphp_get_latch_status(slot->acpi_slot); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * get_adapter_status - get adapter status of a slot |
| * @hotplug_slot: slot to get status |
| * @value: pointer to store status |
| * |
| * ACPI doesn't provide any formal means to access adapter status. |
| * Instead, we fake adapter status from _STA |
| * |
| */ |
| static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| *value = acpiphp_get_adapter_status(slot->acpi_slot); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * get_address - get pci address of a slot |
| * @hotplug_slot: slot to get status |
| * @value: pointer to struct pci_busdev (seg, bus, dev) |
| */ |
| static int get_address(struct hotplug_slot *hotplug_slot, u32 *value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| *value = acpiphp_get_address(slot->acpi_slot); |
| |
| return 0; |
| } |
| |
| static int __init init_acpi(void) |
| { |
| int retval; |
| |
| /* initialize internal data structure etc. */ |
| retval = acpiphp_glue_init(); |
| |
| /* read initial number of slots */ |
| if (!retval) { |
| num_slots = acpiphp_get_num_slots(); |
| if (num_slots == 0) { |
| acpiphp_glue_exit(); |
| retval = -ENODEV; |
| } |
| } |
| |
| return retval; |
| } |
| |
| /** |
| * release_slot - free up the memory used by a slot |
| * @hotplug_slot: slot to free |
| */ |
| static void release_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); |
| |
| kfree(slot->hotplug_slot); |
| kfree(slot); |
| } |
| |
| /* callback routine to initialize 'struct slot' for each slot */ |
| int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) |
| { |
| struct slot *slot; |
| int retval = -ENOMEM; |
| |
| slot = kzalloc(sizeof(*slot), GFP_KERNEL); |
| if (!slot) |
| goto error; |
| |
| slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL); |
| if (!slot->hotplug_slot) |
| goto error_slot; |
| |
| slot->hotplug_slot->info = &slot->info; |
| |
| slot->hotplug_slot->name = slot->name; |
| |
| slot->hotplug_slot->private = slot; |
| slot->hotplug_slot->release = &release_slot; |
| slot->hotplug_slot->ops = &acpi_hotplug_slot_ops; |
| |
| slot->acpi_slot = acpiphp_slot; |
| slot->hotplug_slot->info->power_status = acpiphp_get_power_status(slot->acpi_slot); |
| slot->hotplug_slot->info->attention_status = 0; |
| slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot); |
| slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot); |
| slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN; |
| slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; |
| |
| acpiphp_slot->slot = slot; |
| snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); |
| |
| retval = pci_hp_register(slot->hotplug_slot); |
| if (retval) { |
| err("pci_hp_register failed with error %d\n", retval); |
| goto error_hpslot; |
| } |
| |
| info("Slot [%s] registered\n", slot->hotplug_slot->name); |
| |
| return 0; |
| error_hpslot: |
| kfree(slot->hotplug_slot); |
| error_slot: |
| kfree(slot); |
| error: |
| return retval; |
| } |
| |
| |
| void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *acpiphp_slot) |
| { |
| struct slot *slot = acpiphp_slot->slot; |
| int retval = 0; |
| |
| info ("Slot [%s] unregistered\n", slot->hotplug_slot->name); |
| |
| retval = pci_hp_deregister(slot->hotplug_slot); |
| if (retval) |
| err("pci_hp_deregister failed with error %d\n", retval); |
| } |
| |
| |
| static int __init acpiphp_init(void) |
| { |
| info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); |
| |
| acpiphp_debug = debug; |
| |
| /* read all the ACPI info from the system */ |
| return init_acpi(); |
| } |
| |
| |
| static void __exit acpiphp_exit(void) |
| { |
| /* deallocate internal data structures etc. */ |
| acpiphp_glue_exit(); |
| } |
| |
| module_init(acpiphp_init); |
| module_exit(acpiphp_exit); |