| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2009 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| |
| #include "ixgbe.h" |
| #ifdef CONFIG_IXGBE_DCB |
| #include "ixgbe_dcb_82599.h" |
| #endif /* CONFIG_IXGBE_DCB */ |
| #include <linux/if_ether.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/fc/fc_fs.h> |
| #include <scsi/fc/fc_fcoe.h> |
| #include <scsi/libfc.h> |
| #include <scsi/libfcoe.h> |
| |
| /** |
| * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type |
| * @rx_desc: advanced rx descriptor |
| * |
| * Returns : true if it is FCoE pkt |
| */ |
| static inline bool ixgbe_rx_is_fcoe(union ixgbe_adv_rx_desc *rx_desc) |
| { |
| u16 p; |
| |
| p = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info); |
| if (p & IXGBE_RXDADV_PKTTYPE_ETQF) { |
| p &= IXGBE_RXDADV_PKTTYPE_ETQF_MASK; |
| p >>= IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT; |
| return p == IXGBE_ETQF_FILTER_FCOE; |
| } |
| return false; |
| } |
| |
| /** |
| * ixgbe_fcoe_clear_ddp - clear the given ddp context |
| * @ddp - ptr to the ixgbe_fcoe_ddp |
| * |
| * Returns : none |
| * |
| */ |
| static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp) |
| { |
| ddp->len = 0; |
| ddp->err = 0; |
| ddp->udl = NULL; |
| ddp->udp = 0UL; |
| ddp->sgl = NULL; |
| ddp->sgc = 0; |
| } |
| |
| /** |
| * ixgbe_fcoe_ddp_put - free the ddp context for a given xid |
| * @netdev: the corresponding net_device |
| * @xid: the xid that corresponding ddp will be freed |
| * |
| * This is the implementation of net_device_ops.ndo_fcoe_ddp_done |
| * and it is expected to be called by ULD, i.e., FCP layer of libfc |
| * to release the corresponding ddp context when the I/O is done. |
| * |
| * Returns : data length already ddp-ed in bytes |
| */ |
| int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid) |
| { |
| int len = 0; |
| struct ixgbe_fcoe *fcoe; |
| struct ixgbe_adapter *adapter; |
| struct ixgbe_fcoe_ddp *ddp; |
| |
| if (!netdev) |
| goto out_ddp_put; |
| |
| if (xid >= IXGBE_FCOE_DDP_MAX) |
| goto out_ddp_put; |
| |
| adapter = netdev_priv(netdev); |
| fcoe = &adapter->fcoe; |
| ddp = &fcoe->ddp[xid]; |
| if (!ddp->udl) |
| goto out_ddp_put; |
| |
| len = ddp->len; |
| /* if there an error, force to invalidate ddp context */ |
| if (ddp->err) { |
| spin_lock_bh(&fcoe->lock); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW, |
| (xid | IXGBE_FCFLTRW_WE)); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW, |
| (xid | IXGBE_FCDMARW_WE)); |
| spin_unlock_bh(&fcoe->lock); |
| } |
| if (ddp->sgl) |
| pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc, |
| DMA_FROM_DEVICE); |
| pci_pool_free(fcoe->pool, ddp->udl, ddp->udp); |
| ixgbe_fcoe_clear_ddp(ddp); |
| |
| out_ddp_put: |
| return len; |
| } |
| |
| /** |
| * ixgbe_fcoe_ddp_get - called to set up ddp context |
| * @netdev: the corresponding net_device |
| * @xid: the exchange id requesting ddp |
| * @sgl: the scatter-gather list for this request |
| * @sgc: the number of scatter-gather items |
| * |
| * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup |
| * and is expected to be called from ULD, e.g., FCP layer of libfc |
| * to set up ddp for the corresponding xid of the given sglist for |
| * the corresponding I/O. |
| * |
| * Returns : 1 for success and 0 for no ddp |
| */ |
| int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, |
| struct scatterlist *sgl, unsigned int sgc) |
| { |
| struct ixgbe_adapter *adapter; |
| struct ixgbe_hw *hw; |
| struct ixgbe_fcoe *fcoe; |
| struct ixgbe_fcoe_ddp *ddp; |
| struct scatterlist *sg; |
| unsigned int i, j, dmacount; |
| unsigned int len; |
| static const unsigned int bufflen = 4096; |
| unsigned int firstoff = 0; |
| unsigned int lastsize; |
| unsigned int thisoff = 0; |
| unsigned int thislen = 0; |
| u32 fcbuff, fcdmarw, fcfltrw; |
| dma_addr_t addr; |
| |
| if (!netdev || !sgl) |
| return 0; |
| |
| adapter = netdev_priv(netdev); |
| if (xid >= IXGBE_FCOE_DDP_MAX) { |
| DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid); |
| return 0; |
| } |
| |
| fcoe = &adapter->fcoe; |
| if (!fcoe->pool) { |
| DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid); |
| return 0; |
| } |
| |
| ddp = &fcoe->ddp[xid]; |
| if (ddp->sgl) { |
| DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n", |
| xid, ddp->sgl, ddp->sgc); |
| return 0; |
| } |
| ixgbe_fcoe_clear_ddp(ddp); |
| |
| /* setup dma from scsi command sgl */ |
| dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE); |
| if (dmacount == 0) { |
| DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid); |
| return 0; |
| } |
| |
| /* alloc the udl from our ddp pool */ |
| ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp); |
| if (!ddp->udl) { |
| DPRINTK(DRV, ERR, "failed allocated ddp context\n"); |
| goto out_noddp_unmap; |
| } |
| ddp->sgl = sgl; |
| ddp->sgc = sgc; |
| |
| j = 0; |
| for_each_sg(sgl, sg, dmacount, i) { |
| addr = sg_dma_address(sg); |
| len = sg_dma_len(sg); |
| while (len) { |
| /* get the offset of length of current buffer */ |
| thisoff = addr & ((dma_addr_t)bufflen - 1); |
| thislen = min((bufflen - thisoff), len); |
| /* |
| * all but the 1st buffer (j == 0) |
| * must be aligned on bufflen |
| */ |
| if ((j != 0) && (thisoff)) |
| goto out_noddp_free; |
| /* |
| * all but the last buffer |
| * ((i == (dmacount - 1)) && (thislen == len)) |
| * must end at bufflen |
| */ |
| if (((i != (dmacount - 1)) || (thislen != len)) |
| && ((thislen + thisoff) != bufflen)) |
| goto out_noddp_free; |
| |
| ddp->udl[j] = (u64)(addr - thisoff); |
| /* only the first buffer may have none-zero offset */ |
| if (j == 0) |
| firstoff = thisoff; |
| len -= thislen; |
| addr += thislen; |
| j++; |
| /* max number of buffers allowed in one DDP context */ |
| if (j > IXGBE_BUFFCNT_MAX) { |
| DPRINTK(DRV, ERR, "xid=%x:%d,%d,%d:addr=%llx " |
| "not enough descriptors\n", |
| xid, i, j, dmacount, (u64)addr); |
| goto out_noddp_free; |
| } |
| } |
| } |
| /* only the last buffer may have non-full bufflen */ |
| lastsize = thisoff + thislen; |
| |
| fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT); |
| fcbuff |= (j << IXGBE_FCBUFF_BUFFCNT_SHIFT); |
| fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT); |
| fcbuff |= (IXGBE_FCBUFF_VALID); |
| |
| fcdmarw = xid; |
| fcdmarw |= IXGBE_FCDMARW_WE; |
| fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT); |
| |
| fcfltrw = xid; |
| fcfltrw |= IXGBE_FCFLTRW_WE; |
| |
| /* program DMA context */ |
| hw = &adapter->hw; |
| spin_lock_bh(&fcoe->lock); |
| IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32)); |
| IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32); |
| IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff); |
| IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw); |
| /* program filter context */ |
| IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID); |
| IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw); |
| spin_unlock_bh(&fcoe->lock); |
| |
| return 1; |
| |
| out_noddp_free: |
| pci_pool_free(fcoe->pool, ddp->udl, ddp->udp); |
| ixgbe_fcoe_clear_ddp(ddp); |
| |
| out_noddp_unmap: |
| pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE); |
| return 0; |
| } |
| |
| /** |
| * ixgbe_fcoe_ddp - check ddp status and mark it done |
| * @adapter: ixgbe adapter |
| * @rx_desc: advanced rx descriptor |
| * @skb: the skb holding the received data |
| * |
| * This checks ddp status. |
| * |
| * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates |
| * not passing the skb to ULD, > 0 indicates is the length of data |
| * being ddped. |
| */ |
| int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| u16 xid; |
| u32 fctl; |
| u32 sterr, fceofe, fcerr, fcstat; |
| int rc = -EINVAL; |
| struct ixgbe_fcoe *fcoe; |
| struct ixgbe_fcoe_ddp *ddp; |
| struct fc_frame_header *fh; |
| |
| if (!ixgbe_rx_is_fcoe(rx_desc)) |
| goto ddp_out; |
| |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| sterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
| fcerr = (sterr & IXGBE_RXDADV_ERR_FCERR); |
| fceofe = (sterr & IXGBE_RXDADV_ERR_FCEOFE); |
| if (fcerr == IXGBE_FCERR_BADCRC) |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| skb_reset_network_header(skb); |
| skb_set_transport_header(skb, skb_network_offset(skb) + |
| sizeof(struct fcoe_hdr)); |
| fh = (struct fc_frame_header *)skb_transport_header(skb); |
| fctl = ntoh24(fh->fh_f_ctl); |
| if (fctl & FC_FC_EX_CTX) |
| xid = be16_to_cpu(fh->fh_ox_id); |
| else |
| xid = be16_to_cpu(fh->fh_rx_id); |
| |
| if (xid >= IXGBE_FCOE_DDP_MAX) |
| goto ddp_out; |
| |
| fcoe = &adapter->fcoe; |
| ddp = &fcoe->ddp[xid]; |
| if (!ddp->udl) |
| goto ddp_out; |
| |
| ddp->err = (fcerr | fceofe); |
| if (ddp->err) |
| goto ddp_out; |
| |
| fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT); |
| if (fcstat) { |
| /* update length of DDPed data */ |
| ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss); |
| /* unmap the sg list when FCP_RSP is received */ |
| if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) { |
| pci_unmap_sg(adapter->pdev, ddp->sgl, |
| ddp->sgc, DMA_FROM_DEVICE); |
| ddp->sgl = NULL; |
| ddp->sgc = 0; |
| } |
| /* return 0 to bypass going to ULD for DDPed data */ |
| if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP) |
| rc = 0; |
| else if (ddp->len) |
| rc = ddp->len; |
| } |
| |
| ddp_out: |
| return rc; |
| } |
| |
| /** |
| * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO) |
| * @adapter: ixgbe adapter |
| * @tx_ring: tx desc ring |
| * @skb: associated skb |
| * @tx_flags: tx flags |
| * @hdr_len: hdr_len to be returned |
| * |
| * This sets up large send offload for FCoE |
| * |
| * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error |
| */ |
| int ixgbe_fso(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, struct sk_buff *skb, |
| u32 tx_flags, u8 *hdr_len) |
| { |
| u8 sof, eof; |
| u32 vlan_macip_lens; |
| u32 fcoe_sof_eof; |
| u32 type_tucmd; |
| u32 mss_l4len_idx; |
| int mss = 0; |
| unsigned int i; |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| struct ixgbe_adv_tx_context_desc *context_desc; |
| struct fc_frame_header *fh; |
| |
| if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) { |
| DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n", |
| skb_shinfo(skb)->gso_type); |
| return -EINVAL; |
| } |
| |
| /* resets the header to point fcoe/fc */ |
| skb_set_network_header(skb, skb->mac_len); |
| skb_set_transport_header(skb, skb->mac_len + |
| sizeof(struct fcoe_hdr)); |
| |
| /* sets up SOF and ORIS */ |
| fcoe_sof_eof = 0; |
| sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof; |
| switch (sof) { |
| case FC_SOF_I2: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS; |
| break; |
| case FC_SOF_I3: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF; |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS; |
| break; |
| case FC_SOF_N2: |
| break; |
| case FC_SOF_N3: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF; |
| break; |
| default: |
| DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof); |
| return -EINVAL; |
| } |
| |
| /* the first byte of the last dword is EOF */ |
| skb_copy_bits(skb, skb->len - 4, &eof, 1); |
| /* sets up EOF and ORIE */ |
| switch (eof) { |
| case FC_EOF_N: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N; |
| break; |
| case FC_EOF_T: |
| /* lso needs ORIE */ |
| if (skb_is_gso(skb)) { |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N; |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIE; |
| } else { |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T; |
| } |
| break; |
| case FC_EOF_NI: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI; |
| break; |
| case FC_EOF_A: |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A; |
| break; |
| default: |
| DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof); |
| return -EINVAL; |
| } |
| |
| /* sets up PARINC indicating data offset */ |
| fh = (struct fc_frame_header *)skb_transport_header(skb); |
| if (fh->fh_f_ctl[2] & FC_FC_REL_OFF) |
| fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC; |
| |
| /* hdr_len includes fc_hdr if FCoE lso is enabled */ |
| *hdr_len = sizeof(struct fcoe_crc_eof); |
| if (skb_is_gso(skb)) |
| *hdr_len += (skb_transport_offset(skb) + |
| sizeof(struct fc_frame_header)); |
| /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ |
| vlan_macip_lens = (skb_transport_offset(skb) + |
| sizeof(struct fc_frame_header)); |
| vlan_macip_lens |= ((skb_transport_offset(skb) - 4) |
| << IXGBE_ADVTXD_MACLEN_SHIFT); |
| vlan_macip_lens |= (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK); |
| |
| /* type_tycmd and mss: set TUCMD.FCoE to enable offload */ |
| type_tucmd = IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT | |
| IXGBE_ADVTXT_TUCMD_FCOE; |
| if (skb_is_gso(skb)) |
| mss = skb_shinfo(skb)->gso_size; |
| /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */ |
| mss_l4len_idx = (mss << IXGBE_ADVTXD_MSS_SHIFT) | |
| (1 << IXGBE_ADVTXD_IDX_SHIFT); |
| |
| /* write context desc */ |
| i = tx_ring->next_to_use; |
| context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i); |
| context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); |
| context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof); |
| context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); |
| context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); |
| |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| tx_buffer_info->time_stamp = jiffies; |
| tx_buffer_info->next_to_watch = i; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| tx_ring->next_to_use = i; |
| |
| return skb_is_gso(skb); |
| } |
| |
| /** |
| * ixgbe_configure_fcoe - configures registers for fcoe at start |
| * @adapter: ptr to ixgbe adapter |
| * |
| * This sets up FCoE related registers |
| * |
| * Returns : none |
| */ |
| void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter) |
| { |
| int i, fcoe_q, fcoe_i; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_fcoe *fcoe = &adapter->fcoe; |
| struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE]; |
| |
| /* create the pool for ddp if not created yet */ |
| if (!fcoe->pool) { |
| /* allocate ddp pool */ |
| fcoe->pool = pci_pool_create("ixgbe_fcoe_ddp", |
| adapter->pdev, IXGBE_FCPTR_MAX, |
| IXGBE_FCPTR_ALIGN, PAGE_SIZE); |
| if (!fcoe->pool) |
| DPRINTK(DRV, ERR, |
| "failed to allocated FCoE DDP pool\n"); |
| |
| spin_lock_init(&fcoe->lock); |
| } |
| |
| /* Enable L2 eth type filter for FCoE */ |
| IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE), |
| (ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN)); |
| if (adapter->ring_feature[RING_F_FCOE].indices) { |
| /* Use multiple rx queues for FCoE by redirection table */ |
| for (i = 0; i < IXGBE_FCRETA_SIZE; i++) { |
| fcoe_i = f->mask + i % f->indices; |
| fcoe_i &= IXGBE_FCRETA_ENTRY_MASK; |
| fcoe_q = adapter->rx_ring[fcoe_i].reg_idx; |
| IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q); |
| } |
| IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA); |
| IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0); |
| } else { |
| /* Use single rx queue for FCoE */ |
| fcoe_i = f->mask; |
| fcoe_q = adapter->rx_ring[fcoe_i].reg_idx; |
| IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), |
| IXGBE_ETQS_QUEUE_EN | |
| (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT)); |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, |
| IXGBE_FCRXCTRL_FCOELLI | |
| IXGBE_FCRXCTRL_FCCRCBO | |
| (FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT)); |
| } |
| |
| /** |
| * ixgbe_cleanup_fcoe - release all fcoe ddp context resources |
| * @adapter : ixgbe adapter |
| * |
| * Cleans up outstanding ddp context resources |
| * |
| * Returns : none |
| */ |
| void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| struct ixgbe_fcoe *fcoe = &adapter->fcoe; |
| |
| /* release ddp resource */ |
| if (fcoe->pool) { |
| for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++) |
| ixgbe_fcoe_ddp_put(adapter->netdev, i); |
| pci_pool_destroy(fcoe->pool); |
| fcoe->pool = NULL; |
| } |
| } |
| |
| /** |
| * ixgbe_fcoe_enable - turn on FCoE offload feature |
| * @netdev: the corresponding netdev |
| * |
| * Turns on FCoE offload feature in 82599. |
| * |
| * Returns : 0 indicates success or -EINVAL on failure |
| */ |
| int ixgbe_fcoe_enable(struct net_device *netdev) |
| { |
| int rc = -EINVAL; |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| |
| if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE)) |
| goto out_enable; |
| |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) |
| goto out_enable; |
| |
| DPRINTK(DRV, INFO, "Enabling FCoE offload features.\n"); |
| if (netif_running(netdev)) |
| netdev->netdev_ops->ndo_stop(netdev); |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; |
| adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE; |
| netdev->features |= NETIF_F_FCOE_CRC; |
| netdev->features |= NETIF_F_FSO; |
| netdev->features |= NETIF_F_FCOE_MTU; |
| netdev->vlan_features |= NETIF_F_FCOE_CRC; |
| netdev->vlan_features |= NETIF_F_FSO; |
| netdev->vlan_features |= NETIF_F_FCOE_MTU; |
| netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; |
| netdev_features_change(netdev); |
| |
| ixgbe_init_interrupt_scheme(adapter); |
| |
| if (netif_running(netdev)) |
| netdev->netdev_ops->ndo_open(netdev); |
| rc = 0; |
| |
| out_enable: |
| return rc; |
| } |
| |
| /** |
| * ixgbe_fcoe_disable - turn off FCoE offload feature |
| * @netdev: the corresponding netdev |
| * |
| * Turns off FCoE offload feature in 82599. |
| * |
| * Returns : 0 indicates success or -EINVAL on failure |
| */ |
| int ixgbe_fcoe_disable(struct net_device *netdev) |
| { |
| int rc = -EINVAL; |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE)) |
| goto out_disable; |
| |
| if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) |
| goto out_disable; |
| |
| DPRINTK(DRV, INFO, "Disabling FCoE offload features.\n"); |
| if (netif_running(netdev)) |
| netdev->netdev_ops->ndo_stop(netdev); |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; |
| adapter->ring_feature[RING_F_FCOE].indices = 0; |
| netdev->features &= ~NETIF_F_FCOE_CRC; |
| netdev->features &= ~NETIF_F_FSO; |
| netdev->features &= ~NETIF_F_FCOE_MTU; |
| netdev->vlan_features &= ~NETIF_F_FCOE_CRC; |
| netdev->vlan_features &= ~NETIF_F_FSO; |
| netdev->vlan_features &= ~NETIF_F_FCOE_MTU; |
| netdev->fcoe_ddp_xid = 0; |
| netdev_features_change(netdev); |
| |
| ixgbe_cleanup_fcoe(adapter); |
| |
| ixgbe_init_interrupt_scheme(adapter); |
| if (netif_running(netdev)) |
| netdev->netdev_ops->ndo_open(netdev); |
| rc = 0; |
| |
| out_disable: |
| return rc; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /** |
| * ixgbe_fcoe_getapp - retrieves current user priority bitmap for FCoE |
| * @adapter : ixgbe adapter |
| * |
| * Finds out the corresponding user priority bitmap from the current |
| * traffic class that FCoE belongs to. Returns 0 as the invalid user |
| * priority bitmap to indicate an error. |
| * |
| * Returns : 802.1p user priority bitmap for FCoE |
| */ |
| u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| u8 tc; |
| u32 up2tc; |
| |
| up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC); |
| for (i = 0; i < MAX_USER_PRIORITY; i++) { |
| tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT)); |
| tc &= (MAX_TRAFFIC_CLASS - 1); |
| if (adapter->fcoe.tc == tc) |
| return 1 << i; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_fcoe_setapp - sets the user priority bitmap for FCoE |
| * @adapter : ixgbe adapter |
| * @up : 802.1p user priority bitmap |
| * |
| * Finds out the traffic class from the input user priority |
| * bitmap for FCoE. |
| * |
| * Returns : 0 on success otherwise returns 1 on error |
| */ |
| u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up) |
| { |
| int i; |
| u32 up2tc; |
| |
| /* valid user priority bitmap must not be 0 */ |
| if (up) { |
| /* from user priority to the corresponding traffic class */ |
| up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC); |
| for (i = 0; i < MAX_USER_PRIORITY; i++) { |
| if (up & (1 << i)) { |
| up2tc >>= (i * IXGBE_RTTUP2TC_UP_SHIFT); |
| up2tc &= (MAX_TRAFFIC_CLASS - 1); |
| adapter->fcoe.tc = (u8)up2tc; |
| return 0; |
| } |
| } |
| } |
| |
| return 1; |
| } |
| #endif /* CONFIG_IXGBE_DCB */ |