| /* |
| * drivers/net/ibm_newemac/core.c |
| * |
| * Driver for PowerPC 4xx on-chip ethernet controller. |
| * |
| * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. |
| * <benh@kernel.crashing.org> |
| * |
| * Based on the arch/ppc version of the driver: |
| * |
| * Copyright (c) 2004, 2005 Zultys Technologies. |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| * |
| * Based on original work by |
| * Matt Porter <mporter@kernel.crashing.org> |
| * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> |
| * Armin Kuster <akuster@mvista.com> |
| * Johnnie Peters <jpeters@mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/crc32.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/bitops.h> |
| #include <linux/workqueue.h> |
| #include <linux/of.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/uaccess.h> |
| #include <asm/dcr.h> |
| #include <asm/dcr-regs.h> |
| |
| #include "core.h" |
| |
| /* |
| * Lack of dma_unmap_???? calls is intentional. |
| * |
| * API-correct usage requires additional support state information to be |
| * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to |
| * EMAC design (e.g. TX buffer passed from network stack can be split into |
| * several BDs, dma_map_single/dma_map_page can be used to map particular BD), |
| * maintaining such information will add additional overhead. |
| * Current DMA API implementation for 4xx processors only ensures cache coherency |
| * and dma_unmap_???? routines are empty and are likely to stay this way. |
| * I decided to omit dma_unmap_??? calls because I don't want to add additional |
| * complexity just for the sake of following some abstract API, when it doesn't |
| * add any real benefit to the driver. I understand that this decision maybe |
| * controversial, but I really tried to make code API-correct and efficient |
| * at the same time and didn't come up with code I liked :(. --ebs |
| */ |
| |
| #define DRV_NAME "emac" |
| #define DRV_VERSION "3.54" |
| #define DRV_DESC "PPC 4xx OCP EMAC driver" |
| |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_AUTHOR |
| ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * PPC64 doesn't (yet) have a cacheable_memcpy |
| */ |
| #ifdef CONFIG_PPC64 |
| #define cacheable_memcpy(d,s,n) memcpy((d),(s),(n)) |
| #endif |
| |
| /* minimum number of free TX descriptors required to wake up TX process */ |
| #define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) |
| |
| /* If packet size is less than this number, we allocate small skb and copy packet |
| * contents into it instead of just sending original big skb up |
| */ |
| #define EMAC_RX_COPY_THRESH CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD |
| |
| /* Since multiple EMACs share MDIO lines in various ways, we need |
| * to avoid re-using the same PHY ID in cases where the arch didn't |
| * setup precise phy_map entries |
| * |
| * XXX This is something that needs to be reworked as we can have multiple |
| * EMAC "sets" (multiple ASICs containing several EMACs) though we can |
| * probably require in that case to have explicit PHY IDs in the device-tree |
| */ |
| static u32 busy_phy_map; |
| static DEFINE_MUTEX(emac_phy_map_lock); |
| |
| /* This is the wait queue used to wait on any event related to probe, that |
| * is discovery of MALs, other EMACs, ZMII/RGMIIs, etc... |
| */ |
| static DECLARE_WAIT_QUEUE_HEAD(emac_probe_wait); |
| |
| /* Having stable interface names is a doomed idea. However, it would be nice |
| * if we didn't have completely random interface names at boot too :-) It's |
| * just a matter of making everybody's life easier. Since we are doing |
| * threaded probing, it's a bit harder though. The base idea here is that |
| * we make up a list of all emacs in the device-tree before we register the |
| * driver. Every emac will then wait for the previous one in the list to |
| * initialize before itself. We should also keep that list ordered by |
| * cell_index. |
| * That list is only 4 entries long, meaning that additional EMACs don't |
| * get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased. |
| */ |
| |
| #define EMAC_BOOT_LIST_SIZE 4 |
| static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE]; |
| |
| /* How long should I wait for dependent devices ? */ |
| #define EMAC_PROBE_DEP_TIMEOUT (HZ * 5) |
| |
| /* I don't want to litter system log with timeout errors |
| * when we have brain-damaged PHY. |
| */ |
| static inline void emac_report_timeout_error(struct emac_instance *dev, |
| const char *error) |
| { |
| if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX | |
| EMAC_FTR_460EX_PHY_CLK_FIX | |
| EMAC_FTR_440EP_PHY_CLK_FIX)) |
| DBG(dev, "%s" NL, error); |
| else if (net_ratelimit()) |
| printk(KERN_ERR "%s: %s\n", dev->ofdev->node->full_name, error); |
| } |
| |
| /* EMAC PHY clock workaround: |
| * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, |
| * which allows controlling each EMAC clock |
| */ |
| static inline void emac_rx_clk_tx(struct emac_instance *dev) |
| { |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_MFR, |
| 0, SDR0_MFR_ECS >> dev->cell_index); |
| #endif |
| } |
| |
| static inline void emac_rx_clk_default(struct emac_instance *dev) |
| { |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_MFR, |
| SDR0_MFR_ECS >> dev->cell_index, 0); |
| #endif |
| } |
| |
| /* PHY polling intervals */ |
| #define PHY_POLL_LINK_ON HZ |
| #define PHY_POLL_LINK_OFF (HZ / 5) |
| |
| /* Graceful stop timeouts in us. |
| * We should allow up to 1 frame time (full-duplex, ignoring collisions) |
| */ |
| #define STOP_TIMEOUT_10 1230 |
| #define STOP_TIMEOUT_100 124 |
| #define STOP_TIMEOUT_1000 13 |
| #define STOP_TIMEOUT_1000_JUMBO 73 |
| |
| static unsigned char default_mcast_addr[] = { |
| 0x01, 0x80, 0xC2, 0x00, 0x00, 0x01 |
| }; |
| |
| /* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ |
| static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { |
| "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", |
| "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", |
| "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", |
| "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", |
| "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", |
| "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", |
| "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", |
| "rx_bad_packet", "rx_runt_packet", "rx_short_event", |
| "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", |
| "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", |
| "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", |
| "tx_bd_excessive_collisions", "tx_bd_late_collision", |
| "tx_bd_multple_collisions", "tx_bd_single_collision", |
| "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", |
| "tx_errors" |
| }; |
| |
| static irqreturn_t emac_irq(int irq, void *dev_instance); |
| static void emac_clean_tx_ring(struct emac_instance *dev); |
| static void __emac_set_multicast_list(struct emac_instance *dev); |
| |
| static inline int emac_phy_supports_gige(int phy_mode) |
| { |
| return phy_mode == PHY_MODE_GMII || |
| phy_mode == PHY_MODE_RGMII || |
| phy_mode == PHY_MODE_SGMII || |
| phy_mode == PHY_MODE_TBI || |
| phy_mode == PHY_MODE_RTBI; |
| } |
| |
| static inline int emac_phy_gpcs(int phy_mode) |
| { |
| return phy_mode == PHY_MODE_SGMII || |
| phy_mode == PHY_MODE_TBI || |
| phy_mode == PHY_MODE_RTBI; |
| } |
| |
| static inline void emac_tx_enable(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| |
| DBG(dev, "tx_enable" NL); |
| |
| r = in_be32(&p->mr0); |
| if (!(r & EMAC_MR0_TXE)) |
| out_be32(&p->mr0, r | EMAC_MR0_TXE); |
| } |
| |
| static void emac_tx_disable(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| |
| DBG(dev, "tx_disable" NL); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_TXE) { |
| int n = dev->stop_timeout; |
| out_be32(&p->mr0, r & ~EMAC_MR0_TXE); |
| while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, "TX disable timeout"); |
| } |
| } |
| |
| static void emac_rx_enable(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| |
| if (unlikely(test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) |
| goto out; |
| |
| DBG(dev, "rx_enable" NL); |
| |
| r = in_be32(&p->mr0); |
| if (!(r & EMAC_MR0_RXE)) { |
| if (unlikely(!(r & EMAC_MR0_RXI))) { |
| /* Wait if previous async disable is still in progress */ |
| int n = dev->stop_timeout; |
| while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, |
| "RX disable timeout"); |
| } |
| out_be32(&p->mr0, r | EMAC_MR0_RXE); |
| } |
| out: |
| ; |
| } |
| |
| static void emac_rx_disable(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| |
| DBG(dev, "rx_disable" NL); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_RXE) { |
| int n = dev->stop_timeout; |
| out_be32(&p->mr0, r & ~EMAC_MR0_RXE); |
| while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, "RX disable timeout"); |
| } |
| } |
| |
| static inline void emac_netif_stop(struct emac_instance *dev) |
| { |
| netif_tx_lock_bh(dev->ndev); |
| netif_addr_lock(dev->ndev); |
| dev->no_mcast = 1; |
| netif_addr_unlock(dev->ndev); |
| netif_tx_unlock_bh(dev->ndev); |
| dev->ndev->trans_start = jiffies; /* prevent tx timeout */ |
| mal_poll_disable(dev->mal, &dev->commac); |
| netif_tx_disable(dev->ndev); |
| } |
| |
| static inline void emac_netif_start(struct emac_instance *dev) |
| { |
| netif_tx_lock_bh(dev->ndev); |
| netif_addr_lock(dev->ndev); |
| dev->no_mcast = 0; |
| if (dev->mcast_pending && netif_running(dev->ndev)) |
| __emac_set_multicast_list(dev); |
| netif_addr_unlock(dev->ndev); |
| netif_tx_unlock_bh(dev->ndev); |
| |
| netif_wake_queue(dev->ndev); |
| |
| /* NOTE: unconditional netif_wake_queue is only appropriate |
| * so long as all callers are assured to have free tx slots |
| * (taken from tg3... though the case where that is wrong is |
| * not terribly harmful) |
| */ |
| mal_poll_enable(dev->mal, &dev->commac); |
| } |
| |
| static inline void emac_rx_disable_async(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| |
| DBG(dev, "rx_disable_async" NL); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_RXE) |
| out_be32(&p->mr0, r & ~EMAC_MR0_RXE); |
| } |
| |
| static int emac_reset(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| int n = 20; |
| |
| DBG(dev, "reset" NL); |
| |
| if (!dev->reset_failed) { |
| /* 40x erratum suggests stopping RX channel before reset, |
| * we stop TX as well |
| */ |
| emac_rx_disable(dev); |
| emac_tx_disable(dev); |
| } |
| |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| /* Enable internal clock source */ |
| if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_ETH_CFG, |
| 0, SDR0_ETH_CFG_ECS << dev->cell_index); |
| #endif |
| |
| out_be32(&p->mr0, EMAC_MR0_SRST); |
| while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) |
| --n; |
| |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| /* Enable external clock source */ |
| if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_ETH_CFG, |
| SDR0_ETH_CFG_ECS << dev->cell_index, 0); |
| #endif |
| |
| if (n) { |
| dev->reset_failed = 0; |
| return 0; |
| } else { |
| emac_report_timeout_error(dev, "reset timeout"); |
| dev->reset_failed = 1; |
| return -ETIMEDOUT; |
| } |
| } |
| |
| static void emac_hash_mc(struct emac_instance *dev) |
| { |
| const int regs = EMAC_XAHT_REGS(dev); |
| u32 *gaht_base = emac_gaht_base(dev); |
| u32 gaht_temp[regs]; |
| struct dev_mc_list *dmi; |
| int i; |
| |
| DBG(dev, "hash_mc %d" NL, dev->ndev->mc_count); |
| |
| memset(gaht_temp, 0, sizeof (gaht_temp)); |
| |
| for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { |
| int slot, reg, mask; |
| DBG2(dev, "mc %pM" NL, dmi->dmi_addr); |
| |
| slot = EMAC_XAHT_CRC_TO_SLOT(dev, ether_crc(ETH_ALEN, dmi->dmi_addr)); |
| reg = EMAC_XAHT_SLOT_TO_REG(dev, slot); |
| mask = EMAC_XAHT_SLOT_TO_MASK(dev, slot); |
| |
| gaht_temp[reg] |= mask; |
| } |
| |
| for (i = 0; i < regs; i++) |
| out_be32(gaht_base + i, gaht_temp[i]); |
| } |
| |
| static inline u32 emac_iff2rmr(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| u32 r; |
| |
| r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE; |
| |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| r |= EMAC4_RMR_BASE; |
| else |
| r |= EMAC_RMR_BASE; |
| |
| if (ndev->flags & IFF_PROMISC) |
| r |= EMAC_RMR_PME; |
| else if (ndev->flags & IFF_ALLMULTI || |
| (ndev->mc_count > EMAC_XAHT_SLOTS(dev))) |
| r |= EMAC_RMR_PMME; |
| else if (ndev->mc_count > 0) |
| r |= EMAC_RMR_MAE; |
| |
| return r; |
| } |
| |
| static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) |
| { |
| u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC_MR1_TR0_MULT; |
| |
| DBG2(dev, "__emac_calc_base_mr1" NL); |
| |
| switch(tx_size) { |
| case 2048: |
| ret |= EMAC_MR1_TFS_2K; |
| break; |
| default: |
| printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", |
| dev->ndev->name, tx_size); |
| } |
| |
| switch(rx_size) { |
| case 16384: |
| ret |= EMAC_MR1_RFS_16K; |
| break; |
| case 4096: |
| ret |= EMAC_MR1_RFS_4K; |
| break; |
| default: |
| printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", |
| dev->ndev->name, rx_size); |
| } |
| |
| return ret; |
| } |
| |
| static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) |
| { |
| u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR | |
| EMAC4_MR1_OBCI(dev->opb_bus_freq / 1000000); |
| |
| DBG2(dev, "__emac4_calc_base_mr1" NL); |
| |
| switch(tx_size) { |
| case 16384: |
| ret |= EMAC4_MR1_TFS_16K; |
| break; |
| case 4096: |
| ret |= EMAC4_MR1_TFS_4K; |
| break; |
| case 2048: |
| ret |= EMAC4_MR1_TFS_2K; |
| break; |
| default: |
| printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", |
| dev->ndev->name, tx_size); |
| } |
| |
| switch(rx_size) { |
| case 16384: |
| ret |= EMAC4_MR1_RFS_16K; |
| break; |
| case 4096: |
| ret |= EMAC4_MR1_RFS_4K; |
| break; |
| case 2048: |
| ret |= EMAC4_MR1_RFS_2K; |
| break; |
| default: |
| printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", |
| dev->ndev->name, rx_size); |
| } |
| |
| return ret; |
| } |
| |
| static u32 emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) |
| { |
| return emac_has_feature(dev, EMAC_FTR_EMAC4) ? |
| __emac4_calc_base_mr1(dev, tx_size, rx_size) : |
| __emac_calc_base_mr1(dev, tx_size, rx_size); |
| } |
| |
| static inline u32 emac_calc_trtr(struct emac_instance *dev, unsigned int size) |
| { |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| return ((size >> 6) - 1) << EMAC_TRTR_SHIFT_EMAC4; |
| else |
| return ((size >> 6) - 1) << EMAC_TRTR_SHIFT; |
| } |
| |
| static inline u32 emac_calc_rwmr(struct emac_instance *dev, |
| unsigned int low, unsigned int high) |
| { |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| return (low << 22) | ( (high & 0x3ff) << 6); |
| else |
| return (low << 23) | ( (high & 0x1ff) << 7); |
| } |
| |
| static int emac_configure(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| struct net_device *ndev = dev->ndev; |
| int tx_size, rx_size, link = netif_carrier_ok(dev->ndev); |
| u32 r, mr1 = 0; |
| |
| DBG(dev, "configure" NL); |
| |
| if (!link) { |
| out_be32(&p->mr1, in_be32(&p->mr1) |
| | EMAC_MR1_FDE | EMAC_MR1_ILE); |
| udelay(100); |
| } else if (emac_reset(dev) < 0) |
| return -ETIMEDOUT; |
| |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) |
| tah_reset(dev->tah_dev); |
| |
| DBG(dev, " link = %d duplex = %d, pause = %d, asym_pause = %d\n", |
| link, dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause); |
| |
| /* Default fifo sizes */ |
| tx_size = dev->tx_fifo_size; |
| rx_size = dev->rx_fifo_size; |
| |
| /* No link, force loopback */ |
| if (!link) |
| mr1 = EMAC_MR1_FDE | EMAC_MR1_ILE; |
| |
| /* Check for full duplex */ |
| else if (dev->phy.duplex == DUPLEX_FULL) |
| mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; |
| |
| /* Adjust fifo sizes, mr1 and timeouts based on link speed */ |
| dev->stop_timeout = STOP_TIMEOUT_10; |
| switch (dev->phy.speed) { |
| case SPEED_1000: |
| if (emac_phy_gpcs(dev->phy.mode)) { |
| mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA( |
| (dev->phy.gpcs_address != 0xffffffff) ? |
| dev->phy.gpcs_address : dev->phy.address); |
| |
| /* Put some arbitrary OUI, Manuf & Rev IDs so we can |
| * identify this GPCS PHY later. |
| */ |
| out_be32(&p->u1.emac4.ipcr, 0xdeadbeef); |
| } else |
| mr1 |= EMAC_MR1_MF_1000; |
| |
| /* Extended fifo sizes */ |
| tx_size = dev->tx_fifo_size_gige; |
| rx_size = dev->rx_fifo_size_gige; |
| |
| if (dev->ndev->mtu > ETH_DATA_LEN) { |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| mr1 |= EMAC4_MR1_JPSM; |
| else |
| mr1 |= EMAC_MR1_JPSM; |
| dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; |
| } else |
| dev->stop_timeout = STOP_TIMEOUT_1000; |
| break; |
| case SPEED_100: |
| mr1 |= EMAC_MR1_MF_100; |
| dev->stop_timeout = STOP_TIMEOUT_100; |
| break; |
| default: /* make gcc happy */ |
| break; |
| } |
| |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_set_speed(dev->rgmii_dev, dev->rgmii_port, |
| dev->phy.speed); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_set_speed(dev->zmii_dev, dev->zmii_port, dev->phy.speed); |
| |
| /* on 40x erratum forces us to NOT use integrated flow control, |
| * let's hope it works on 44x ;) |
| */ |
| if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x) && |
| dev->phy.duplex == DUPLEX_FULL) { |
| if (dev->phy.pause) |
| mr1 |= EMAC_MR1_EIFC | EMAC_MR1_APP; |
| else if (dev->phy.asym_pause) |
| mr1 |= EMAC_MR1_APP; |
| } |
| |
| /* Add base settings & fifo sizes & program MR1 */ |
| mr1 |= emac_calc_base_mr1(dev, tx_size, rx_size); |
| out_be32(&p->mr1, mr1); |
| |
| /* Set individual MAC address */ |
| out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); |
| out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | |
| (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | |
| ndev->dev_addr[5]); |
| |
| /* VLAN Tag Protocol ID */ |
| out_be32(&p->vtpid, 0x8100); |
| |
| /* Receive mode register */ |
| r = emac_iff2rmr(ndev); |
| if (r & EMAC_RMR_MAE) |
| emac_hash_mc(dev); |
| out_be32(&p->rmr, r); |
| |
| /* FIFOs thresholds */ |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| r = EMAC4_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, |
| tx_size / 2 / dev->fifo_entry_size); |
| else |
| r = EMAC_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, |
| tx_size / 2 / dev->fifo_entry_size); |
| out_be32(&p->tmr1, r); |
| out_be32(&p->trtr, emac_calc_trtr(dev, tx_size / 2)); |
| |
| /* PAUSE frame is sent when RX FIFO reaches its high-water mark, |
| there should be still enough space in FIFO to allow the our link |
| partner time to process this frame and also time to send PAUSE |
| frame itself. |
| |
| Here is the worst case scenario for the RX FIFO "headroom" |
| (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): |
| |
| 1) One maximum-length frame on TX 1522 bytes |
| 2) One PAUSE frame time 64 bytes |
| 3) PAUSE frame decode time allowance 64 bytes |
| 4) One maximum-length frame on RX 1522 bytes |
| 5) Round-trip propagation delay of the link (100Mb) 15 bytes |
| ---------- |
| 3187 bytes |
| |
| I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) |
| low-water mark to RX_FIFO_SIZE / 8 (512 bytes) |
| */ |
| r = emac_calc_rwmr(dev, rx_size / 8 / dev->fifo_entry_size, |
| rx_size / 4 / dev->fifo_entry_size); |
| out_be32(&p->rwmr, r); |
| |
| /* Set PAUSE timer to the maximum */ |
| out_be32(&p->ptr, 0xffff); |
| |
| /* IRQ sources */ |
| r = EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | |
| EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | |
| EMAC_ISR_IRE | EMAC_ISR_TE; |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| r |= EMAC4_ISR_TXPE | EMAC4_ISR_RXPE /* | EMAC4_ISR_TXUE | |
| EMAC4_ISR_RXOE | */; |
| out_be32(&p->iser, r); |
| |
| /* We need to take GPCS PHY out of isolate mode after EMAC reset */ |
| if (emac_phy_gpcs(dev->phy.mode)) { |
| if (dev->phy.gpcs_address != 0xffffffff) |
| emac_mii_reset_gpcs(&dev->phy); |
| else |
| emac_mii_reset_phy(&dev->phy); |
| } |
| |
| return 0; |
| } |
| |
| static void emac_reinitialize(struct emac_instance *dev) |
| { |
| DBG(dev, "reinitialize" NL); |
| |
| emac_netif_stop(dev); |
| if (!emac_configure(dev)) { |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| } |
| emac_netif_start(dev); |
| } |
| |
| static void emac_full_tx_reset(struct emac_instance *dev) |
| { |
| DBG(dev, "full_tx_reset" NL); |
| |
| emac_tx_disable(dev); |
| mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); |
| emac_clean_tx_ring(dev); |
| dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; |
| |
| emac_configure(dev); |
| |
| mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| } |
| |
| static void emac_reset_work(struct work_struct *work) |
| { |
| struct emac_instance *dev = container_of(work, struct emac_instance, reset_work); |
| |
| DBG(dev, "reset_work" NL); |
| |
| mutex_lock(&dev->link_lock); |
| if (dev->opened) { |
| emac_netif_stop(dev); |
| emac_full_tx_reset(dev); |
| emac_netif_start(dev); |
| } |
| mutex_unlock(&dev->link_lock); |
| } |
| |
| static void emac_tx_timeout(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| DBG(dev, "tx_timeout" NL); |
| |
| schedule_work(&dev->reset_work); |
| } |
| |
| |
| static inline int emac_phy_done(struct emac_instance *dev, u32 stacr) |
| { |
| int done = !!(stacr & EMAC_STACR_OC); |
| |
| if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) |
| done = !done; |
| |
| return done; |
| }; |
| |
| static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r = 0; |
| int n, err = -ETIMEDOUT; |
| |
| mutex_lock(&dev->mdio_lock); |
| |
| DBG2(dev, "mdio_read(%02x,%02x)" NL, id, reg); |
| |
| /* Enable proper MDIO port */ |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_get_mdio(dev->zmii_dev, dev->zmii_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); |
| |
| /* Wait for management interface to become idle */ |
| n = 20; |
| while (!emac_phy_done(dev, in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) { |
| DBG2(dev, " -> timeout wait idle\n"); |
| goto bail; |
| } |
| } |
| |
| /* Issue read command */ |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| r = EMAC4_STACR_BASE(dev->opb_bus_freq); |
| else |
| r = EMAC_STACR_BASE(dev->opb_bus_freq); |
| if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) |
| r |= EMAC_STACR_OC; |
| if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR)) |
| r |= EMACX_STACR_STAC_READ; |
| else |
| r |= EMAC_STACR_STAC_READ; |
| r |= (reg & EMAC_STACR_PRA_MASK) |
| | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT); |
| out_be32(&p->stacr, r); |
| |
| /* Wait for read to complete */ |
| n = 200; |
| while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) { |
| udelay(1); |
| if (!--n) { |
| DBG2(dev, " -> timeout wait complete\n"); |
| goto bail; |
| } |
| } |
| |
| if (unlikely(r & EMAC_STACR_PHYE)) { |
| DBG(dev, "mdio_read(%02x, %02x) failed" NL, id, reg); |
| err = -EREMOTEIO; |
| goto bail; |
| } |
| |
| r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); |
| |
| DBG2(dev, "mdio_read -> %04x" NL, r); |
| err = 0; |
| bail: |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_put_mdio(dev->zmii_dev, dev->zmii_port); |
| mutex_unlock(&dev->mdio_lock); |
| |
| return err == 0 ? r : err; |
| } |
| |
| static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg, |
| u16 val) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r = 0; |
| int n, err = -ETIMEDOUT; |
| |
| mutex_lock(&dev->mdio_lock); |
| |
| DBG2(dev, "mdio_write(%02x,%02x,%04x)" NL, id, reg, val); |
| |
| /* Enable proper MDIO port */ |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_get_mdio(dev->zmii_dev, dev->zmii_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); |
| |
| /* Wait for management interface to be idle */ |
| n = 20; |
| while (!emac_phy_done(dev, in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) { |
| DBG2(dev, " -> timeout wait idle\n"); |
| goto bail; |
| } |
| } |
| |
| /* Issue write command */ |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| r = EMAC4_STACR_BASE(dev->opb_bus_freq); |
| else |
| r = EMAC_STACR_BASE(dev->opb_bus_freq); |
| if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) |
| r |= EMAC_STACR_OC; |
| if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR)) |
| r |= EMACX_STACR_STAC_WRITE; |
| else |
| r |= EMAC_STACR_STAC_WRITE; |
| r |= (reg & EMAC_STACR_PRA_MASK) | |
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | |
| (val << EMAC_STACR_PHYD_SHIFT); |
| out_be32(&p->stacr, r); |
| |
| /* Wait for write to complete */ |
| n = 200; |
| while (!emac_phy_done(dev, in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) { |
| DBG2(dev, " -> timeout wait complete\n"); |
| goto bail; |
| } |
| } |
| err = 0; |
| bail: |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_put_mdio(dev->zmii_dev, dev->zmii_port); |
| mutex_unlock(&dev->mdio_lock); |
| } |
| |
| static int emac_mdio_read(struct net_device *ndev, int id, int reg) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int res; |
| |
| res = __emac_mdio_read((dev->mdio_instance && |
| dev->phy.gpcs_address != id) ? |
| dev->mdio_instance : dev, |
| (u8) id, (u8) reg); |
| return res; |
| } |
| |
| static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| __emac_mdio_write((dev->mdio_instance && |
| dev->phy.gpcs_address != id) ? |
| dev->mdio_instance : dev, |
| (u8) id, (u8) reg, (u16) val); |
| } |
| |
| /* Tx lock BH */ |
| static void __emac_set_multicast_list(struct emac_instance *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 rmr = emac_iff2rmr(dev->ndev); |
| |
| DBG(dev, "__multicast %08x" NL, rmr); |
| |
| /* I decided to relax register access rules here to avoid |
| * full EMAC reset. |
| * |
| * There is a real problem with EMAC4 core if we use MWSW_001 bit |
| * in MR1 register and do a full EMAC reset. |
| * One TX BD status update is delayed and, after EMAC reset, it |
| * never happens, resulting in TX hung (it'll be recovered by TX |
| * timeout handler eventually, but this is just gross). |
| * So we either have to do full TX reset or try to cheat here :) |
| * |
| * The only required change is to RX mode register, so I *think* all |
| * we need is just to stop RX channel. This seems to work on all |
| * tested SoCs. --ebs |
| * |
| * If we need the full reset, we might just trigger the workqueue |
| * and do it async... a bit nasty but should work --BenH |
| */ |
| dev->mcast_pending = 0; |
| emac_rx_disable(dev); |
| if (rmr & EMAC_RMR_MAE) |
| emac_hash_mc(dev); |
| out_be32(&p->rmr, rmr); |
| emac_rx_enable(dev); |
| } |
| |
| /* Tx lock BH */ |
| static void emac_set_multicast_list(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| DBG(dev, "multicast" NL); |
| |
| BUG_ON(!netif_running(dev->ndev)); |
| |
| if (dev->no_mcast) { |
| dev->mcast_pending = 1; |
| return; |
| } |
| __emac_set_multicast_list(dev); |
| } |
| |
| static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) |
| { |
| int rx_sync_size = emac_rx_sync_size(new_mtu); |
| int rx_skb_size = emac_rx_skb_size(new_mtu); |
| int i, ret = 0; |
| |
| mutex_lock(&dev->link_lock); |
| emac_netif_stop(dev); |
| emac_rx_disable(dev); |
| mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); |
| |
| if (dev->rx_sg_skb) { |
| ++dev->estats.rx_dropped_resize; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| |
| /* Make a first pass over RX ring and mark BDs ready, dropping |
| * non-processed packets on the way. We need this as a separate pass |
| * to simplify error recovery in the case of allocation failure later. |
| */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) { |
| if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) |
| ++dev->estats.rx_dropped_resize; |
| |
| dev->rx_desc[i].data_len = 0; |
| dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | |
| (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| } |
| |
| /* Reallocate RX ring only if bigger skb buffers are required */ |
| if (rx_skb_size <= dev->rx_skb_size) |
| goto skip; |
| |
| /* Second pass, allocate new skbs */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) { |
| struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto oom; |
| } |
| |
| BUG_ON(!dev->rx_skb[i]); |
| dev_kfree_skb(dev->rx_skb[i]); |
| |
| skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); |
| dev->rx_desc[i].data_ptr = |
| dma_map_single(&dev->ofdev->dev, skb->data - 2, rx_sync_size, |
| DMA_FROM_DEVICE) + 2; |
| dev->rx_skb[i] = skb; |
| } |
| skip: |
| /* Check if we need to change "Jumbo" bit in MR1 */ |
| if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { |
| /* This is to prevent starting RX channel in emac_rx_enable() */ |
| set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); |
| |
| dev->ndev->mtu = new_mtu; |
| emac_full_tx_reset(dev); |
| } |
| |
| mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(new_mtu)); |
| oom: |
| /* Restart RX */ |
| clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); |
| dev->rx_slot = 0; |
| mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); |
| emac_rx_enable(dev); |
| emac_netif_start(dev); |
| mutex_unlock(&dev->link_lock); |
| |
| return ret; |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_change_mtu(struct net_device *ndev, int new_mtu) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int ret = 0; |
| |
| if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu) |
| return -EINVAL; |
| |
| DBG(dev, "change_mtu(%d)" NL, new_mtu); |
| |
| if (netif_running(ndev)) { |
| /* Check if we really need to reinitalize RX ring */ |
| if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) |
| ret = emac_resize_rx_ring(dev, new_mtu); |
| } |
| |
| if (!ret) { |
| ndev->mtu = new_mtu; |
| dev->rx_skb_size = emac_rx_skb_size(new_mtu); |
| dev->rx_sync_size = emac_rx_sync_size(new_mtu); |
| } |
| |
| return ret; |
| } |
| |
| static void emac_clean_tx_ring(struct emac_instance *dev) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_TX_BUFF; ++i) { |
| if (dev->tx_skb[i]) { |
| dev_kfree_skb(dev->tx_skb[i]); |
| dev->tx_skb[i] = NULL; |
| if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) |
| ++dev->estats.tx_dropped; |
| } |
| dev->tx_desc[i].ctrl = 0; |
| dev->tx_desc[i].data_ptr = 0; |
| } |
| } |
| |
| static void emac_clean_rx_ring(struct emac_instance *dev) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_RX_BUFF; ++i) |
| if (dev->rx_skb[i]) { |
| dev->rx_desc[i].ctrl = 0; |
| dev_kfree_skb(dev->rx_skb[i]); |
| dev->rx_skb[i] = NULL; |
| dev->rx_desc[i].data_ptr = 0; |
| } |
| |
| if (dev->rx_sg_skb) { |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| } |
| |
| static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot, |
| gfp_t flags) |
| { |
| struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); |
| if (unlikely(!skb)) |
| return -ENOMEM; |
| |
| dev->rx_skb[slot] = skb; |
| dev->rx_desc[slot].data_len = 0; |
| |
| skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); |
| dev->rx_desc[slot].data_ptr = |
| dma_map_single(&dev->ofdev->dev, skb->data - 2, dev->rx_sync_size, |
| DMA_FROM_DEVICE) + 2; |
| wmb(); |
| dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | |
| (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| |
| return 0; |
| } |
| |
| static void emac_print_link_status(struct emac_instance *dev) |
| { |
| if (netif_carrier_ok(dev->ndev)) |
| printk(KERN_INFO "%s: link is up, %d %s%s\n", |
| dev->ndev->name, dev->phy.speed, |
| dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", |
| dev->phy.pause ? ", pause enabled" : |
| dev->phy.asym_pause ? ", asymmetric pause enabled" : ""); |
| else |
| printk(KERN_INFO "%s: link is down\n", dev->ndev->name); |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_open(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int err, i; |
| |
| DBG(dev, "open" NL); |
| |
| /* Setup error IRQ handler */ |
| err = request_irq(dev->emac_irq, emac_irq, 0, "EMAC", dev); |
| if (err) { |
| printk(KERN_ERR "%s: failed to request IRQ %d\n", |
| ndev->name, dev->emac_irq); |
| return err; |
| } |
| |
| /* Allocate RX ring */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) |
| if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { |
| printk(KERN_ERR "%s: failed to allocate RX ring\n", |
| ndev->name); |
| goto oom; |
| } |
| |
| dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = 0; |
| clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); |
| dev->rx_sg_skb = NULL; |
| |
| mutex_lock(&dev->link_lock); |
| dev->opened = 1; |
| |
| /* Start PHY polling now. |
| */ |
| if (dev->phy.address >= 0) { |
| int link_poll_interval; |
| if (dev->phy.def->ops->poll_link(&dev->phy)) { |
| dev->phy.def->ops->read_link(&dev->phy); |
| emac_rx_clk_default(dev); |
| netif_carrier_on(dev->ndev); |
| link_poll_interval = PHY_POLL_LINK_ON; |
| } else { |
| emac_rx_clk_tx(dev); |
| netif_carrier_off(dev->ndev); |
| link_poll_interval = PHY_POLL_LINK_OFF; |
| } |
| dev->link_polling = 1; |
| wmb(); |
| schedule_delayed_work(&dev->link_work, link_poll_interval); |
| emac_print_link_status(dev); |
| } else |
| netif_carrier_on(dev->ndev); |
| |
| /* Required for Pause packet support in EMAC */ |
| dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1); |
| |
| emac_configure(dev); |
| mal_poll_add(dev->mal, &dev->commac); |
| mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); |
| mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(ndev->mtu)); |
| mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| emac_netif_start(dev); |
| |
| mutex_unlock(&dev->link_lock); |
| |
| return 0; |
| oom: |
| emac_clean_rx_ring(dev); |
| free_irq(dev->emac_irq, dev); |
| |
| return -ENOMEM; |
| } |
| |
| /* BHs disabled */ |
| #if 0 |
| static int emac_link_differs(struct emac_instance *dev) |
| { |
| u32 r = in_be32(&dev->emacp->mr1); |
| |
| int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; |
| int speed, pause, asym_pause; |
| |
| if (r & EMAC_MR1_MF_1000) |
| speed = SPEED_1000; |
| else if (r & EMAC_MR1_MF_100) |
| speed = SPEED_100; |
| else |
| speed = SPEED_10; |
| |
| switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { |
| case (EMAC_MR1_EIFC | EMAC_MR1_APP): |
| pause = 1; |
| asym_pause = 0; |
| break; |
| case EMAC_MR1_APP: |
| pause = 0; |
| asym_pause = 1; |
| break; |
| default: |
| pause = asym_pause = 0; |
| } |
| return speed != dev->phy.speed || duplex != dev->phy.duplex || |
| pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; |
| } |
| #endif |
| |
| static void emac_link_timer(struct work_struct *work) |
| { |
| struct emac_instance *dev = |
| container_of(to_delayed_work(work), |
| struct emac_instance, link_work); |
| int link_poll_interval; |
| |
| mutex_lock(&dev->link_lock); |
| DBG2(dev, "link timer" NL); |
| |
| if (!dev->opened) |
| goto bail; |
| |
| if (dev->phy.def->ops->poll_link(&dev->phy)) { |
| if (!netif_carrier_ok(dev->ndev)) { |
| emac_rx_clk_default(dev); |
| /* Get new link parameters */ |
| dev->phy.def->ops->read_link(&dev->phy); |
| |
| netif_carrier_on(dev->ndev); |
| emac_netif_stop(dev); |
| emac_full_tx_reset(dev); |
| emac_netif_start(dev); |
| emac_print_link_status(dev); |
| } |
| link_poll_interval = PHY_POLL_LINK_ON; |
| } else { |
| if (netif_carrier_ok(dev->ndev)) { |
| emac_rx_clk_tx(dev); |
| netif_carrier_off(dev->ndev); |
| netif_tx_disable(dev->ndev); |
| emac_reinitialize(dev); |
| emac_print_link_status(dev); |
| } |
| link_poll_interval = PHY_POLL_LINK_OFF; |
| } |
| schedule_delayed_work(&dev->link_work, link_poll_interval); |
| bail: |
| mutex_unlock(&dev->link_lock); |
| } |
| |
| static void emac_force_link_update(struct emac_instance *dev) |
| { |
| netif_carrier_off(dev->ndev); |
| smp_rmb(); |
| if (dev->link_polling) { |
| cancel_rearming_delayed_work(&dev->link_work); |
| if (dev->link_polling) |
| schedule_delayed_work(&dev->link_work, PHY_POLL_LINK_OFF); |
| } |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_close(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| DBG(dev, "close" NL); |
| |
| if (dev->phy.address >= 0) { |
| dev->link_polling = 0; |
| cancel_rearming_delayed_work(&dev->link_work); |
| } |
| mutex_lock(&dev->link_lock); |
| emac_netif_stop(dev); |
| dev->opened = 0; |
| mutex_unlock(&dev->link_lock); |
| |
| emac_rx_disable(dev); |
| emac_tx_disable(dev); |
| mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); |
| mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); |
| mal_poll_del(dev->mal, &dev->commac); |
| |
| emac_clean_tx_ring(dev); |
| emac_clean_rx_ring(dev); |
| |
| free_irq(dev->emac_irq, dev); |
| |
| netif_carrier_off(ndev); |
| |
| return 0; |
| } |
| |
| static inline u16 emac_tx_csum(struct emac_instance *dev, |
| struct sk_buff *skb) |
| { |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && |
| (skb->ip_summed == CHECKSUM_PARTIAL)) { |
| ++dev->stats.tx_packets_csum; |
| return EMAC_TX_CTRL_TAH_CSUM; |
| } |
| return 0; |
| } |
| |
| static inline int emac_xmit_finish(struct emac_instance *dev, int len) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| struct net_device *ndev = dev->ndev; |
| |
| /* Send the packet out. If the if makes a significant perf |
| * difference, then we can store the TMR0 value in "dev" |
| * instead |
| */ |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| out_be32(&p->tmr0, EMAC4_TMR0_XMIT); |
| else |
| out_be32(&p->tmr0, EMAC_TMR0_XMIT); |
| |
| if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { |
| netif_stop_queue(ndev); |
| DBG2(dev, "stopped TX queue" NL); |
| } |
| |
| ndev->trans_start = jiffies; |
| ++dev->stats.tx_packets; |
| dev->stats.tx_bytes += len; |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Tx lock BH */ |
| static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| unsigned int len = skb->len; |
| int slot; |
| |
| u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | |
| MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); |
| |
| slot = dev->tx_slot++; |
| if (dev->tx_slot == NUM_TX_BUFF) { |
| dev->tx_slot = 0; |
| ctrl |= MAL_TX_CTRL_WRAP; |
| } |
| |
| DBG2(dev, "xmit(%u) %d" NL, len, slot); |
| |
| dev->tx_skb[slot] = skb; |
| dev->tx_desc[slot].data_ptr = dma_map_single(&dev->ofdev->dev, |
| skb->data, len, |
| DMA_TO_DEVICE); |
| dev->tx_desc[slot].data_len = (u16) len; |
| wmb(); |
| dev->tx_desc[slot].ctrl = ctrl; |
| |
| return emac_xmit_finish(dev, len); |
| } |
| |
| static inline int emac_xmit_split(struct emac_instance *dev, int slot, |
| u32 pd, int len, int last, u16 base_ctrl) |
| { |
| while (1) { |
| u16 ctrl = base_ctrl; |
| int chunk = min(len, MAL_MAX_TX_SIZE); |
| len -= chunk; |
| |
| slot = (slot + 1) % NUM_TX_BUFF; |
| |
| if (last && !len) |
| ctrl |= MAL_TX_CTRL_LAST; |
| if (slot == NUM_TX_BUFF - 1) |
| ctrl |= MAL_TX_CTRL_WRAP; |
| |
| dev->tx_skb[slot] = NULL; |
| dev->tx_desc[slot].data_ptr = pd; |
| dev->tx_desc[slot].data_len = (u16) chunk; |
| dev->tx_desc[slot].ctrl = ctrl; |
| ++dev->tx_cnt; |
| |
| if (!len) |
| break; |
| |
| pd += chunk; |
| } |
| return slot; |
| } |
| |
| /* Tx lock BH disabled (SG version for TAH equipped EMACs) */ |
| static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int nr_frags = skb_shinfo(skb)->nr_frags; |
| int len = skb->len, chunk; |
| int slot, i; |
| u16 ctrl; |
| u32 pd; |
| |
| /* This is common "fast" path */ |
| if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) |
| return emac_start_xmit(skb, ndev); |
| |
| len -= skb->data_len; |
| |
| /* Note, this is only an *estimation*, we can still run out of empty |
| * slots because of the additional fragmentation into |
| * MAL_MAX_TX_SIZE-sized chunks |
| */ |
| if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) |
| goto stop_queue; |
| |
| ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | |
| emac_tx_csum(dev, skb); |
| slot = dev->tx_slot; |
| |
| /* skb data */ |
| dev->tx_skb[slot] = NULL; |
| chunk = min(len, MAL_MAX_TX_SIZE); |
| dev->tx_desc[slot].data_ptr = pd = |
| dma_map_single(&dev->ofdev->dev, skb->data, len, DMA_TO_DEVICE); |
| dev->tx_desc[slot].data_len = (u16) chunk; |
| len -= chunk; |
| if (unlikely(len)) |
| slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, |
| ctrl); |
| /* skb fragments */ |
| for (i = 0; i < nr_frags; ++i) { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; |
| len = frag->size; |
| |
| if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) |
| goto undo_frame; |
| |
| pd = dma_map_page(&dev->ofdev->dev, frag->page, frag->page_offset, len, |
| DMA_TO_DEVICE); |
| |
| slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, |
| ctrl); |
| } |
| |
| DBG2(dev, "xmit_sg(%u) %d - %d" NL, skb->len, dev->tx_slot, slot); |
| |
| /* Attach skb to the last slot so we don't release it too early */ |
| dev->tx_skb[slot] = skb; |
| |
| /* Send the packet out */ |
| if (dev->tx_slot == NUM_TX_BUFF - 1) |
| ctrl |= MAL_TX_CTRL_WRAP; |
| wmb(); |
| dev->tx_desc[dev->tx_slot].ctrl = ctrl; |
| dev->tx_slot = (slot + 1) % NUM_TX_BUFF; |
| |
| return emac_xmit_finish(dev, skb->len); |
| |
| undo_frame: |
| /* Well, too bad. Our previous estimation was overly optimistic. |
| * Undo everything. |
| */ |
| while (slot != dev->tx_slot) { |
| dev->tx_desc[slot].ctrl = 0; |
| --dev->tx_cnt; |
| if (--slot < 0) |
| slot = NUM_TX_BUFF - 1; |
| } |
| ++dev->estats.tx_undo; |
| |
| stop_queue: |
| netif_stop_queue(ndev); |
| DBG2(dev, "stopped TX queue" NL); |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* Tx lock BHs */ |
| static void emac_parse_tx_error(struct emac_instance *dev, u16 ctrl) |
| { |
| struct emac_error_stats *st = &dev->estats; |
| |
| DBG(dev, "BD TX error %04x" NL, ctrl); |
| |
| ++st->tx_bd_errors; |
| if (ctrl & EMAC_TX_ST_BFCS) |
| ++st->tx_bd_bad_fcs; |
| if (ctrl & EMAC_TX_ST_LCS) |
| ++st->tx_bd_carrier_loss; |
| if (ctrl & EMAC_TX_ST_ED) |
| ++st->tx_bd_excessive_deferral; |
| if (ctrl & EMAC_TX_ST_EC) |
| ++st->tx_bd_excessive_collisions; |
| if (ctrl & EMAC_TX_ST_LC) |
| ++st->tx_bd_late_collision; |
| if (ctrl & EMAC_TX_ST_MC) |
| ++st->tx_bd_multple_collisions; |
| if (ctrl & EMAC_TX_ST_SC) |
| ++st->tx_bd_single_collision; |
| if (ctrl & EMAC_TX_ST_UR) |
| ++st->tx_bd_underrun; |
| if (ctrl & EMAC_TX_ST_SQE) |
| ++st->tx_bd_sqe; |
| } |
| |
| static void emac_poll_tx(void *param) |
| { |
| struct emac_instance *dev = param; |
| u32 bad_mask; |
| |
| DBG2(dev, "poll_tx, %d %d" NL, dev->tx_cnt, dev->ack_slot); |
| |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) |
| bad_mask = EMAC_IS_BAD_TX_TAH; |
| else |
| bad_mask = EMAC_IS_BAD_TX; |
| |
| netif_tx_lock_bh(dev->ndev); |
| if (dev->tx_cnt) { |
| u16 ctrl; |
| int slot = dev->ack_slot, n = 0; |
| again: |
| ctrl = dev->tx_desc[slot].ctrl; |
| if (!(ctrl & MAL_TX_CTRL_READY)) { |
| struct sk_buff *skb = dev->tx_skb[slot]; |
| ++n; |
| |
| if (skb) { |
| dev_kfree_skb(skb); |
| dev->tx_skb[slot] = NULL; |
| } |
| slot = (slot + 1) % NUM_TX_BUFF; |
| |
| if (unlikely(ctrl & bad_mask)) |
| emac_parse_tx_error(dev, ctrl); |
| |
| if (--dev->tx_cnt) |
| goto again; |
| } |
| if (n) { |
| dev->ack_slot = slot; |
| if (netif_queue_stopped(dev->ndev) && |
| dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) |
| netif_wake_queue(dev->ndev); |
| |
| DBG2(dev, "tx %d pkts" NL, n); |
| } |
| } |
| netif_tx_unlock_bh(dev->ndev); |
| } |
| |
| static inline void emac_recycle_rx_skb(struct emac_instance *dev, int slot, |
| int len) |
| { |
| struct sk_buff *skb = dev->rx_skb[slot]; |
| |
| DBG2(dev, "recycle %d %d" NL, slot, len); |
| |
| if (len) |
| dma_map_single(&dev->ofdev->dev, skb->data - 2, |
| EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); |
| |
| dev->rx_desc[slot].data_len = 0; |
| wmb(); |
| dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | |
| (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| } |
| |
| static void emac_parse_rx_error(struct emac_instance *dev, u16 ctrl) |
| { |
| struct emac_error_stats *st = &dev->estats; |
| |
| DBG(dev, "BD RX error %04x" NL, ctrl); |
| |
| ++st->rx_bd_errors; |
| if (ctrl & EMAC_RX_ST_OE) |
| ++st->rx_bd_overrun; |
| if (ctrl & EMAC_RX_ST_BP) |
| ++st->rx_bd_bad_packet; |
| if (ctrl & EMAC_RX_ST_RP) |
| ++st->rx_bd_runt_packet; |
| if (ctrl & EMAC_RX_ST_SE) |
| ++st->rx_bd_short_event; |
| if (ctrl & EMAC_RX_ST_AE) |
| ++st->rx_bd_alignment_error; |
| if (ctrl & EMAC_RX_ST_BFCS) |
| ++st->rx_bd_bad_fcs; |
| if (ctrl & EMAC_RX_ST_PTL) |
| ++st->rx_bd_packet_too_long; |
| if (ctrl & EMAC_RX_ST_ORE) |
| ++st->rx_bd_out_of_range; |
| if (ctrl & EMAC_RX_ST_IRE) |
| ++st->rx_bd_in_range; |
| } |
| |
| static inline void emac_rx_csum(struct emac_instance *dev, |
| struct sk_buff *skb, u16 ctrl) |
| { |
| #ifdef CONFIG_IBM_NEW_EMAC_TAH |
| if (!ctrl && dev->tah_dev) { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| ++dev->stats.rx_packets_csum; |
| } |
| #endif |
| } |
| |
| static inline int emac_rx_sg_append(struct emac_instance *dev, int slot) |
| { |
| if (likely(dev->rx_sg_skb != NULL)) { |
| int len = dev->rx_desc[slot].data_len; |
| int tot_len = dev->rx_sg_skb->len + len; |
| |
| if (unlikely(tot_len + 2 > dev->rx_skb_size)) { |
| ++dev->estats.rx_dropped_mtu; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } else { |
| cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb), |
| dev->rx_skb[slot]->data, len); |
| skb_put(dev->rx_sg_skb, len); |
| emac_recycle_rx_skb(dev, slot, len); |
| return 0; |
| } |
| } |
| emac_recycle_rx_skb(dev, slot, 0); |
| return -1; |
| } |
| |
| /* NAPI poll context */ |
| static int emac_poll_rx(void *param, int budget) |
| { |
| struct emac_instance *dev = param; |
| int slot = dev->rx_slot, received = 0; |
| |
| DBG2(dev, "poll_rx(%d)" NL, budget); |
| |
| again: |
| while (budget > 0) { |
| int len; |
| struct sk_buff *skb; |
| u16 ctrl = dev->rx_desc[slot].ctrl; |
| |
| if (ctrl & MAL_RX_CTRL_EMPTY) |
| break; |
| |
| skb = dev->rx_skb[slot]; |
| mb(); |
| len = dev->rx_desc[slot].data_len; |
| |
| if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) |
| goto sg; |
| |
| ctrl &= EMAC_BAD_RX_MASK; |
| if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { |
| emac_parse_rx_error(dev, ctrl); |
| ++dev->estats.rx_dropped_error; |
| emac_recycle_rx_skb(dev, slot, 0); |
| len = 0; |
| goto next; |
| } |
| |
| if (len < ETH_HLEN) { |
| ++dev->estats.rx_dropped_stack; |
| emac_recycle_rx_skb(dev, slot, len); |
| goto next; |
| } |
| |
| if (len && len < EMAC_RX_COPY_THRESH) { |
| struct sk_buff *copy_skb = |
| alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); |
| if (unlikely(!copy_skb)) |
| goto oom; |
| |
| skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); |
| cacheable_memcpy(copy_skb->data - 2, skb->data - 2, |
| len + 2); |
| emac_recycle_rx_skb(dev, slot, len); |
| skb = copy_skb; |
| } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) |
| goto oom; |
| |
| skb_put(skb, len); |
| push_packet: |
| skb->dev = dev->ndev; |
| skb->protocol = eth_type_trans(skb, dev->ndev); |
| emac_rx_csum(dev, skb, ctrl); |
| |
| if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) |
| ++dev->estats.rx_dropped_stack; |
| next: |
| ++dev->stats.rx_packets; |
| skip: |
| dev->stats.rx_bytes += len; |
| slot = (slot + 1) % NUM_RX_BUFF; |
| --budget; |
| ++received; |
| continue; |
| sg: |
| if (ctrl & MAL_RX_CTRL_FIRST) { |
| BUG_ON(dev->rx_sg_skb); |
| if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { |
| DBG(dev, "rx OOM %d" NL, slot); |
| ++dev->estats.rx_dropped_oom; |
| emac_recycle_rx_skb(dev, slot, 0); |
| } else { |
| dev->rx_sg_skb = skb; |
| skb_put(skb, len); |
| } |
| } else if (!emac_rx_sg_append(dev, slot) && |
| (ctrl & MAL_RX_CTRL_LAST)) { |
| |
| skb = dev->rx_sg_skb; |
| dev->rx_sg_skb = NULL; |
| |
| ctrl &= EMAC_BAD_RX_MASK; |
| if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { |
| emac_parse_rx_error(dev, ctrl); |
| ++dev->estats.rx_dropped_error; |
| dev_kfree_skb(skb); |
| len = 0; |
| } else |
| goto push_packet; |
| } |
| goto skip; |
| oom: |
| DBG(dev, "rx OOM %d" NL, slot); |
| /* Drop the packet and recycle skb */ |
| ++dev->estats.rx_dropped_oom; |
| emac_recycle_rx_skb(dev, slot, 0); |
| goto next; |
| } |
| |
| if (received) { |
| DBG2(dev, "rx %d BDs" NL, received); |
| dev->rx_slot = slot; |
| } |
| |
| if (unlikely(budget && test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) { |
| mb(); |
| if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { |
| DBG2(dev, "rx restart" NL); |
| received = 0; |
| goto again; |
| } |
| |
| if (dev->rx_sg_skb) { |
| DBG2(dev, "dropping partial rx packet" NL); |
| ++dev->estats.rx_dropped_error; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| |
| clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); |
| mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); |
| emac_rx_enable(dev); |
| dev->rx_slot = 0; |
| } |
| return received; |
| } |
| |
| /* NAPI poll context */ |
| static int emac_peek_rx(void *param) |
| { |
| struct emac_instance *dev = param; |
| |
| return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); |
| } |
| |
| /* NAPI poll context */ |
| static int emac_peek_rx_sg(void *param) |
| { |
| struct emac_instance *dev = param; |
| |
| int slot = dev->rx_slot; |
| while (1) { |
| u16 ctrl = dev->rx_desc[slot].ctrl; |
| if (ctrl & MAL_RX_CTRL_EMPTY) |
| return 0; |
| else if (ctrl & MAL_RX_CTRL_LAST) |
| return 1; |
| |
| slot = (slot + 1) % NUM_RX_BUFF; |
| |
| /* I'm just being paranoid here :) */ |
| if (unlikely(slot == dev->rx_slot)) |
| return 0; |
| } |
| } |
| |
| /* Hard IRQ */ |
| static void emac_rxde(void *param) |
| { |
| struct emac_instance *dev = param; |
| |
| ++dev->estats.rx_stopped; |
| emac_rx_disable_async(dev); |
| } |
| |
| /* Hard IRQ */ |
| static irqreturn_t emac_irq(int irq, void *dev_instance) |
| { |
| struct emac_instance *dev = dev_instance; |
| struct emac_regs __iomem *p = dev->emacp; |
| struct emac_error_stats *st = &dev->estats; |
| u32 isr; |
| |
| spin_lock(&dev->lock); |
| |
| isr = in_be32(&p->isr); |
| out_be32(&p->isr, isr); |
| |
| DBG(dev, "isr = %08x" NL, isr); |
| |
| if (isr & EMAC4_ISR_TXPE) |
| ++st->tx_parity; |
| if (isr & EMAC4_ISR_RXPE) |
| ++st->rx_parity; |
| if (isr & EMAC4_ISR_TXUE) |
| ++st->tx_underrun; |
| if (isr & EMAC4_ISR_RXOE) |
| ++st->rx_fifo_overrun; |
| if (isr & EMAC_ISR_OVR) |
| ++st->rx_overrun; |
| if (isr & EMAC_ISR_BP) |
| ++st->rx_bad_packet; |
| if (isr & EMAC_ISR_RP) |
| ++st->rx_runt_packet; |
| if (isr & EMAC_ISR_SE) |
| ++st->rx_short_event; |
| if (isr & EMAC_ISR_ALE) |
| ++st->rx_alignment_error; |
| if (isr & EMAC_ISR_BFCS) |
| ++st->rx_bad_fcs; |
| if (isr & EMAC_ISR_PTLE) |
| ++st->rx_packet_too_long; |
| if (isr & EMAC_ISR_ORE) |
| ++st->rx_out_of_range; |
| if (isr & EMAC_ISR_IRE) |
| ++st->rx_in_range; |
| if (isr & EMAC_ISR_SQE) |
| ++st->tx_sqe; |
| if (isr & EMAC_ISR_TE) |
| ++st->tx_errors; |
| |
| spin_unlock(&dev->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct net_device_stats *emac_stats(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| struct emac_stats *st = &dev->stats; |
| struct emac_error_stats *est = &dev->estats; |
| struct net_device_stats *nst = &dev->nstats; |
| unsigned long flags; |
| |
| DBG2(dev, "stats" NL); |
| |
| /* Compute "legacy" statistics */ |
| spin_lock_irqsave(&dev->lock, flags); |
| nst->rx_packets = (unsigned long)st->rx_packets; |
| nst->rx_bytes = (unsigned long)st->rx_bytes; |
| nst->tx_packets = (unsigned long)st->tx_packets; |
| nst->tx_bytes = (unsigned long)st->tx_bytes; |
| nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + |
| est->rx_dropped_error + |
| est->rx_dropped_resize + |
| est->rx_dropped_mtu); |
| nst->tx_dropped = (unsigned long)est->tx_dropped; |
| |
| nst->rx_errors = (unsigned long)est->rx_bd_errors; |
| nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + |
| est->rx_fifo_overrun + |
| est->rx_overrun); |
| nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + |
| est->rx_alignment_error); |
| nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + |
| est->rx_bad_fcs); |
| nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + |
| est->rx_bd_short_event + |
| est->rx_bd_packet_too_long + |
| est->rx_bd_out_of_range + |
| est->rx_bd_in_range + |
| est->rx_runt_packet + |
| est->rx_short_event + |
| est->rx_packet_too_long + |
| est->rx_out_of_range + |
| est->rx_in_range); |
| |
| nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); |
| nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + |
| est->tx_underrun); |
| nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; |
| nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + |
| est->tx_bd_excessive_collisions + |
| est->tx_bd_late_collision + |
| est->tx_bd_multple_collisions); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return nst; |
| } |
| |
| static struct mal_commac_ops emac_commac_ops = { |
| .poll_tx = &emac_poll_tx, |
| .poll_rx = &emac_poll_rx, |
| .peek_rx = &emac_peek_rx, |
| .rxde = &emac_rxde, |
| }; |
| |
| static struct mal_commac_ops emac_commac_sg_ops = { |
| .poll_tx = &emac_poll_tx, |
| .poll_rx = &emac_poll_rx, |
| .peek_rx = &emac_peek_rx_sg, |
| .rxde = &emac_rxde, |
| }; |
| |
| /* Ethtool support */ |
| static int emac_ethtool_get_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| cmd->supported = dev->phy.features; |
| cmd->port = PORT_MII; |
| cmd->phy_address = dev->phy.address; |
| cmd->transceiver = |
| dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; |
| |
| mutex_lock(&dev->link_lock); |
| cmd->advertising = dev->phy.advertising; |
| cmd->autoneg = dev->phy.autoneg; |
| cmd->speed = dev->phy.speed; |
| cmd->duplex = dev->phy.duplex; |
| mutex_unlock(&dev->link_lock); |
| |
| return 0; |
| } |
| |
| static int emac_ethtool_set_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| u32 f = dev->phy.features; |
| |
| DBG(dev, "set_settings(%d, %d, %d, 0x%08x)" NL, |
| cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); |
| |
| /* Basic sanity checks */ |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) |
| return -EINVAL; |
| if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) |
| return -EINVAL; |
| if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) |
| return -EINVAL; |
| |
| if (cmd->autoneg == AUTONEG_DISABLE) { |
| switch (cmd->speed) { |
| case SPEED_10: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_10baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_10baseT_Full)) |
| return -EINVAL; |
| break; |
| case SPEED_100: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_100baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_100baseT_Full)) |
| return -EINVAL; |
| break; |
| case SPEED_1000: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_1000baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_1000baseT_Full)) |
| return -EINVAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mutex_lock(&dev->link_lock); |
| dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, |
| cmd->duplex); |
| mutex_unlock(&dev->link_lock); |
| |
| } else { |
| if (!(f & SUPPORTED_Autoneg)) |
| return -EINVAL; |
| |
| mutex_lock(&dev->link_lock); |
| dev->phy.def->ops->setup_aneg(&dev->phy, |
| (cmd->advertising & f) | |
| (dev->phy.advertising & |
| (ADVERTISED_Pause | |
| ADVERTISED_Asym_Pause))); |
| mutex_unlock(&dev->link_lock); |
| } |
| emac_force_link_update(dev); |
| |
| return 0; |
| } |
| |
| static void emac_ethtool_get_ringparam(struct net_device *ndev, |
| struct ethtool_ringparam *rp) |
| { |
| rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; |
| rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; |
| } |
| |
| static void emac_ethtool_get_pauseparam(struct net_device *ndev, |
| struct ethtool_pauseparam *pp) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| mutex_lock(&dev->link_lock); |
| if ((dev->phy.features & SUPPORTED_Autoneg) && |
| (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) |
| pp->autoneg = 1; |
| |
| if (dev->phy.duplex == DUPLEX_FULL) { |
| if (dev->phy.pause) |
| pp->rx_pause = pp->tx_pause = 1; |
| else if (dev->phy.asym_pause) |
| pp->tx_pause = 1; |
| } |
| mutex_unlock(&dev->link_lock); |
| } |
| |
| static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| return dev->tah_dev != NULL; |
| } |
| |
| static int emac_get_regs_len(struct emac_instance *dev) |
| { |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) |
| return sizeof(struct emac_ethtool_regs_subhdr) + |
| EMAC4_ETHTOOL_REGS_SIZE(dev); |
| else |
| return sizeof(struct emac_ethtool_regs_subhdr) + |
| EMAC_ETHTOOL_REGS_SIZE(dev); |
| } |
| |
| static int emac_ethtool_get_regs_len(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int size; |
| |
| size = sizeof(struct emac_ethtool_regs_hdr) + |
| emac_get_regs_len(dev) + mal_get_regs_len(dev->mal); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| size += zmii_get_regs_len(dev->zmii_dev); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| size += rgmii_get_regs_len(dev->rgmii_dev); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) |
| size += tah_get_regs_len(dev->tah_dev); |
| |
| return size; |
| } |
| |
| static void *emac_dump_regs(struct emac_instance *dev, void *buf) |
| { |
| struct emac_ethtool_regs_subhdr *hdr = buf; |
| |
| hdr->index = dev->cell_index; |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4)) { |
| hdr->version = EMAC4_ETHTOOL_REGS_VER; |
| memcpy_fromio(hdr + 1, dev->emacp, EMAC4_ETHTOOL_REGS_SIZE(dev)); |
| return ((void *)(hdr + 1) + EMAC4_ETHTOOL_REGS_SIZE(dev)); |
| } else { |
| hdr->version = EMAC_ETHTOOL_REGS_VER; |
| memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE(dev)); |
| return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE(dev)); |
| } |
| } |
| |
| static void emac_ethtool_get_regs(struct net_device *ndev, |
| struct ethtool_regs *regs, void *buf) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| struct emac_ethtool_regs_hdr *hdr = buf; |
| |
| hdr->components = 0; |
| buf = hdr + 1; |
| |
| buf = mal_dump_regs(dev->mal, buf); |
| buf = emac_dump_regs(dev, buf); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) { |
| hdr->components |= EMAC_ETHTOOL_REGS_ZMII; |
| buf = zmii_dump_regs(dev->zmii_dev, buf); |
| } |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) { |
| hdr->components |= EMAC_ETHTOOL_REGS_RGMII; |
| buf = rgmii_dump_regs(dev->rgmii_dev, buf); |
| } |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) { |
| hdr->components |= EMAC_ETHTOOL_REGS_TAH; |
| buf = tah_dump_regs(dev->tah_dev, buf); |
| } |
| } |
| |
| static int emac_ethtool_nway_reset(struct net_device *ndev) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| int res = 0; |
| |
| DBG(dev, "nway_reset" NL); |
| |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| |
| mutex_lock(&dev->link_lock); |
| if (!dev->phy.autoneg) { |
| res = -EINVAL; |
| goto out; |
| } |
| |
| dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); |
| out: |
| mutex_unlock(&dev->link_lock); |
| emac_force_link_update(dev); |
| return res; |
| } |
| |
| static int emac_ethtool_get_stats_count(struct net_device *ndev) |
| { |
| return EMAC_ETHTOOL_STATS_COUNT; |
| } |
| |
| static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, |
| u8 * buf) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); |
| } |
| |
| static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, |
| struct ethtool_stats *estats, |
| u64 * tmp_stats) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); |
| tmp_stats += sizeof(dev->stats) / sizeof(u64); |
| memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); |
| } |
| |
| static void emac_ethtool_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *info) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| |
| strcpy(info->driver, "ibm_emac"); |
| strcpy(info->version, DRV_VERSION); |
| info->fw_version[0] = '\0'; |
| sprintf(info->bus_info, "PPC 4xx EMAC-%d %s", |
| dev->cell_index, dev->ofdev->node->full_name); |
| info->n_stats = emac_ethtool_get_stats_count(ndev); |
| info->regdump_len = emac_ethtool_get_regs_len(ndev); |
| } |
| |
| static const struct ethtool_ops emac_ethtool_ops = { |
| .get_settings = emac_ethtool_get_settings, |
| .set_settings = emac_ethtool_set_settings, |
| .get_drvinfo = emac_ethtool_get_drvinfo, |
| |
| .get_regs_len = emac_ethtool_get_regs_len, |
| .get_regs = emac_ethtool_get_regs, |
| |
| .nway_reset = emac_ethtool_nway_reset, |
| |
| .get_ringparam = emac_ethtool_get_ringparam, |
| .get_pauseparam = emac_ethtool_get_pauseparam, |
| |
| .get_rx_csum = emac_ethtool_get_rx_csum, |
| |
| .get_strings = emac_ethtool_get_strings, |
| .get_stats_count = emac_ethtool_get_stats_count, |
| .get_ethtool_stats = emac_ethtool_get_ethtool_stats, |
| |
| .get_link = ethtool_op_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| }; |
| |
| static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) |
| { |
| struct emac_instance *dev = netdev_priv(ndev); |
| struct mii_ioctl_data *data = if_mii(rq); |
| |
| DBG(dev, "ioctl %08x" NL, cmd); |
| |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = dev->phy.address; |
| /* Fall through */ |
| case SIOCGMIIREG: |
| data->val_out = emac_mdio_read(ndev, dev->phy.address, |
| data->reg_num); |
| return 0; |
| |
| case SIOCSMIIREG: |
| emac_mdio_write(ndev, dev->phy.address, data->reg_num, |
| data->val_in); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| struct emac_depentry { |
| u32 phandle; |
| struct device_node *node; |
| struct of_device *ofdev; |
| void *drvdata; |
| }; |
| |
| #define EMAC_DEP_MAL_IDX 0 |
| #define EMAC_DEP_ZMII_IDX 1 |
| #define EMAC_DEP_RGMII_IDX 2 |
| #define EMAC_DEP_TAH_IDX 3 |
| #define EMAC_DEP_MDIO_IDX 4 |
| #define EMAC_DEP_PREV_IDX 5 |
| #define EMAC_DEP_COUNT 6 |
| |
| static int __devinit emac_check_deps(struct emac_instance *dev, |
| struct emac_depentry *deps) |
| { |
| int i, there = 0; |
| struct device_node *np; |
| |
| for (i = 0; i < EMAC_DEP_COUNT; i++) { |
| /* no dependency on that item, allright */ |
| if (deps[i].phandle == 0) { |
| there++; |
| continue; |
| } |
| /* special case for blist as the dependency might go away */ |
| if (i == EMAC_DEP_PREV_IDX) { |
| np = *(dev->blist - 1); |
| if (np == NULL) { |
| deps[i].phandle = 0; |
| there++; |
| continue; |
| } |
| if (deps[i].node == NULL) |
| deps[i].node = of_node_get(np); |
| } |
| if (deps[i].node == NULL) |
| deps[i].node = of_find_node_by_phandle(deps[i].phandle); |
| if (deps[i].node == NULL) |
| continue; |
| if (deps[i].ofdev == NULL) |
| deps[i].ofdev = of_find_device_by_node(deps[i].node); |
| if (deps[i].ofdev == NULL) |
| continue; |
| if (deps[i].drvdata == NULL) |
| deps[i].drvdata = dev_get_drvdata(&deps[i].ofdev->dev); |
| if (deps[i].drvdata != NULL) |
| there++; |
| } |
| return (there == EMAC_DEP_COUNT); |
| } |
| |
| static void emac_put_deps(struct emac_instance *dev) |
| { |
| if (dev->mal_dev) |
| of_dev_put(dev->mal_dev); |
| if (dev->zmii_dev) |
| of_dev_put(dev->zmii_dev); |
| if (dev->rgmii_dev) |
| of_dev_put(dev->rgmii_dev); |
| if (dev->mdio_dev) |
| of_dev_put(dev->mdio_dev); |
| if (dev->tah_dev) |
| of_dev_put(dev->tah_dev); |
| } |
| |
| static int __devinit emac_of_bus_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| /* We are only intereted in device addition */ |
| if (action == BUS_NOTIFY_BOUND_DRIVER) |
| wake_up_all(&emac_probe_wait); |
| return 0; |
| } |
| |
| static struct notifier_block emac_of_bus_notifier __devinitdata = { |
| .notifier_call = emac_of_bus_notify |
| }; |
| |
| static int __devinit emac_wait_deps(struct emac_instance *dev) |
| { |
| struct emac_depentry deps[EMAC_DEP_COUNT]; |
| int i, err; |
| |
| memset(&deps, 0, sizeof(deps)); |
| |
| deps[EMAC_DEP_MAL_IDX].phandle = dev->mal_ph; |
| deps[EMAC_DEP_ZMII_IDX].phandle = dev->zmii_ph; |
| deps[EMAC_DEP_RGMII_IDX].phandle = dev->rgmii_ph; |
| if (dev->tah_ph) |
| deps[EMAC_DEP_TAH_IDX].phandle = dev->tah_ph; |
| if (dev->mdio_ph) |
| deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph; |
| if (dev->blist && dev->blist > emac_boot_list) |
| deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu; |
| bus_register_notifier(&of_platform_bus_type, &emac_of_bus_notifier); |
| wait_event_timeout(emac_probe_wait, |
| emac_check_deps(dev, deps), |
| EMAC_PROBE_DEP_TIMEOUT); |
| bus_unregister_notifier(&of_platform_bus_type, &emac_of_bus_notifier); |
| err = emac_check_deps(dev, deps) ? 0 : -ENODEV; |
| for (i = 0; i < EMAC_DEP_COUNT; i++) { |
| if (deps[i].node) |
| of_node_put(deps[i].node); |
| if (err && deps[i].ofdev) |
| of_dev_put(deps[i].ofdev); |
| } |
| if (err == 0) { |
| dev->mal_dev = deps[EMAC_DEP_MAL_IDX].ofdev; |
| dev->zmii_dev = deps[EMAC_DEP_ZMII_IDX].ofdev; |
| dev->rgmii_dev = deps[EMAC_DEP_RGMII_IDX].ofdev; |
| dev->tah_dev = deps[EMAC_DEP_TAH_IDX].ofdev; |
| dev->mdio_dev = deps[EMAC_DEP_MDIO_IDX].ofdev; |
| } |
| if (deps[EMAC_DEP_PREV_IDX].ofdev) |
| of_dev_put(deps[EMAC_DEP_PREV_IDX].ofdev); |
| return err; |
| } |
| |
| static int __devinit emac_read_uint_prop(struct device_node *np, const char *name, |
| u32 *val, int fatal) |
| { |
| int len; |
| const u32 *prop = of_get_property(np, name, &len); |
| if (prop == NULL || len < sizeof(u32)) { |
| if (fatal) |
| printk(KERN_ERR "%s: missing %s property\n", |
| np->full_name, name); |
| return -ENODEV; |
| } |
| *val = *prop; |
| return 0; |
| } |
| |
| static int __devinit emac_init_phy(struct emac_instance *dev) |
| { |
| struct device_node *np = dev->ofdev->node; |
| struct net_device *ndev = dev->ndev; |
| u32 phy_map, adv; |
| int i; |
| |
| dev->phy.dev = ndev; |
| dev->phy.mode = dev->phy_mode; |
| |
| /* PHY-less configuration. |
| * XXX I probably should move these settings to the dev tree |
| */ |
| if (dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) { |
| emac_reset(dev); |
| |
| /* PHY-less configuration. |
| * XXX I probably should move these settings to the dev tree |
| */ |
| dev->phy.address = -1; |
| dev->phy.features = SUPPORTED_MII; |
| if (emac_phy_supports_gige(dev->phy_mode)) |
| dev->phy.features |= SUPPORTED_1000baseT_Full; |
| else |
| dev->phy.features |= SUPPORTED_100baseT_Full; |
| dev->phy.pause = 1; |
| |
| return 0; |
| } |
| |
| mutex_lock(&emac_phy_map_lock); |
| phy_map = dev->phy_map | busy_phy_map; |
| |
| DBG(dev, "PHY maps %08x %08x" NL, dev->phy_map, busy_phy_map); |
| |
| dev->phy.mdio_read = emac_mdio_read; |
| dev->phy.mdio_write = emac_mdio_write; |
| |
| /* Enable internal clock source */ |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS); |
| #endif |
| /* PHY clock workaround */ |
| emac_rx_clk_tx(dev); |
| |
| /* Enable internal clock source on 440GX*/ |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS); |
| #endif |
| /* Configure EMAC with defaults so we can at least use MDIO |
| * This is needed mostly for 440GX |
| */ |
| if (emac_phy_gpcs(dev->phy.mode)) { |
| /* XXX |
| * Make GPCS PHY address equal to EMAC index. |
| * We probably should take into account busy_phy_map |
| * and/or phy_map here. |
| * |
| * Note that the busy_phy_map is currently global |
| * while it should probably be per-ASIC... |
| */ |
| dev->phy.gpcs_address = dev->gpcs_address; |
| if (dev->phy.gpcs_address == 0xffffffff) |
| dev->phy.address = dev->cell_index; |
| } |
| |
| emac_configure(dev); |
| |
| if (dev->phy_address != 0xffffffff) |
| phy_map = ~(1 << dev->phy_address); |
| |
| for (i = 0; i < 0x20; phy_map >>= 1, ++i) |
| if (!(phy_map & 1)) { |
| int r; |
| busy_phy_map |= 1 << i; |
| |
| /* Quick check if there is a PHY at the address */ |
| r = emac_mdio_read(dev->ndev, i, MII_BMCR); |
| if (r == 0xffff || r < 0) |
| continue; |
| if (!emac_mii_phy_probe(&dev->phy, i)) |
| break; |
| } |
| |
| /* Enable external clock source */ |
| #ifdef CONFIG_PPC_DCR_NATIVE |
| if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX)) |
| dcri_clrset(SDR0, SDR0_MFR, SDR0_MFR_ECS, 0); |
| #endif |
| mutex_unlock(&emac_phy_map_lock); |
| if (i == 0x20) { |
| printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name); |
| return -ENXIO; |
| } |
| |
| /* Init PHY */ |
| if (dev->phy.def->ops->init) |
| dev->phy.def->ops->init(&dev->phy); |
| |
| /* Disable any PHY features not supported by the platform */ |
| dev->phy.def->features &= ~dev->phy_feat_exc; |
| |
| /* Setup initial link parameters */ |
| if (dev->phy.features & SUPPORTED_Autoneg) { |
| adv = dev->phy.features; |
| if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x)) |
| adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; |
| /* Restart autonegotiation */ |
| dev->phy.def->ops->setup_aneg(&dev->phy, adv); |
| } else { |
| u32 f = dev->phy.def->features; |
| int speed = SPEED_10, fd = DUPLEX_HALF; |
| |
| /* Select highest supported speed/duplex */ |
| if (f & SUPPORTED_1000baseT_Full) { |
| speed = SPEED_1000; |
| fd = DUPLEX_FULL; |
| } else if (f & SUPPORTED_1000baseT_Half) |
| speed = SPEED_1000; |
| else if (f & SUPPORTED_100baseT_Full) { |
| speed = SPEED_100; |
| fd = DUPLEX_FULL; |
| } else if (f & SUPPORTED_100baseT_Half) |
| speed = SPEED_100; |
| else if (f & SUPPORTED_10baseT_Full) |
| fd = DUPLEX_FULL; |
| |
| /* Force link parameters */ |
| dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); |
| } |
| return 0; |
| } |
| |
| static int __devinit emac_init_config(struct emac_instance *dev) |
| { |
| struct device_node *np = dev->ofdev->node; |
| const void *p; |
| unsigned int plen; |
| const char *pm, *phy_modes[] = { |
| [PHY_MODE_NA] = "", |
| [PHY_MODE_MII] = "mii", |
| [PHY_MODE_RMII] = "rmii", |
| [PHY_MODE_SMII] = "smii", |
| [PHY_MODE_RGMII] = "rgmii", |
| [PHY_MODE_TBI] = "tbi", |
| [PHY_MODE_GMII] = "gmii", |
| [PHY_MODE_RTBI] = "rtbi", |
| [PHY_MODE_SGMII] = "sgmii", |
| }; |
| |
| /* Read config from device-tree */ |
| if (emac_read_uint_prop(np, "mal-device", &dev->mal_ph, 1)) |
| return -ENXIO; |
| if (emac_read_uint_prop(np, "mal-tx-channel", &dev->mal_tx_chan, 1)) |
| return -ENXIO; |
| if (emac_read_uint_prop(np, "mal-rx-channel", &dev->mal_rx_chan, 1)) |
| return -ENXIO; |
| if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1)) |
| return -ENXIO; |
| if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0)) |
| dev->max_mtu = 1500; |
| if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0)) |
| dev->rx_fifo_size = 2048; |
| if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0)) |
| dev->tx_fifo_size = 2048; |
| if (emac_read_uint_prop(np, "rx-fifo-size-gige", &dev->rx_fifo_size_gige, 0)) |
| dev->rx_fifo_size_gige = dev->rx_fifo_size; |
| if (emac_read_uint_prop(np, "tx-fifo-size-gige", &dev->tx_fifo_size_gige, 0)) |
| dev->tx_fifo_size_gige = dev->tx_fifo_size; |
| if (emac_read_uint_prop(np, "phy-address", &dev->phy_address, 0)) |
| dev->phy_address = 0xffffffff; |
| if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0)) |
| dev->phy_map = 0xffffffff; |
| if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0)) |
| dev->gpcs_address = 0xffffffff; |
| if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1)) |
| return -ENXIO; |
| if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0)) |
| dev->tah_ph = 0; |
| if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0)) |
| dev->tah_port = 0; |
| if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0)) |
| dev->mdio_ph = 0; |
| if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0)) |
| dev->zmii_ph = 0; |
| if (emac_read_uint_prop(np, "zmii-channel", &dev->zmii_port, 0)) |
| dev->zmii_port = 0xffffffff; |
| if (emac_read_uint_prop(np, "rgmii-device", &dev->rgmii_ph, 0)) |
| dev->rgmii_ph = 0; |
| if (emac_read_uint_prop(np, "rgmii-channel", &dev->rgmii_port, 0)) |
| dev->rgmii_port = 0xffffffff; |
| if (emac_read_uint_prop(np, "fifo-entry-size", &dev->fifo_entry_size, 0)) |
| dev->fifo_entry_size = 16; |
| if (emac_read_uint_prop(np, "mal-burst-size", &dev->mal_burst_size, 0)) |
| dev->mal_burst_size = 256; |
| |
| /* PHY mode needs some decoding */ |
| dev->phy_mode = PHY_MODE_NA; |
| pm = of_get_property(np, "phy-mode", &plen); |
| if (pm != NULL) { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(phy_modes); i++) |
| if (!strcasecmp(pm, phy_modes[i])) { |
| dev->phy_mode = i; |
| break; |
| } |
| } |
| |
| /* Backward compat with non-final DT */ |
| if (dev->phy_mode == PHY_MODE_NA && pm != NULL && plen == 4) { |
| u32 nmode = *(const u32 *)pm; |
| if (nmode > PHY_MODE_NA && nmode <= PHY_MODE_SGMII) |
| dev->phy_mode = nmode; |
| } |
| |
| /* Check EMAC version */ |
| if (of_device_is_compatible(np, "ibm,emac4sync")) { |
| dev->features |= (EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC); |
| if (of_device_is_compatible(np, "ibm,emac-460ex") || |
| of_device_is_compatible(np, "ibm,emac-460gt")) |
| dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX; |
| if (of_device_is_compatible(np, "ibm,emac-405ex") || |
| of_device_is_compatible(np, "ibm,emac-405exr")) |
| dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; |
| } else if (of_device_is_compatible(np, "ibm,emac4")) { |
| dev->features |= EMAC_FTR_EMAC4; |
| if (of_device_is_compatible(np, "ibm,emac-440gx")) |
| dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX; |
| } else { |
| if (of_device_is_compatible(np, "ibm,emac-440ep") || |
| of_device_is_compatible(np, "ibm,emac-440gr")) |
| dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; |
| if (of_device_is_compatible(np, "ibm,emac-405ez")) { |
| #ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL |
| dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; |
| #else |
| printk(KERN_ERR "%s: Flow control not disabled!\n", |
| np->full_name); |
| return -ENXIO; |
| #endif |
| } |
| |
| } |
| |
| /* Fixup some feature bits based on the device tree */ |
| if (of_get_property(np, "has-inverted-stacr-oc", NULL)) |
| dev->features |= EMAC_FTR_STACR_OC_INVERT; |
| if (of_get_property(np, "has-new-stacr-staopc", NULL)) |
| dev->features |= EMAC_FTR_HAS_NEW_STACR; |
| |
| /* CAB lacks the appropriate properties */ |
| if (of_device_is_compatible(np, "ibm,emac-axon")) |
| dev->features |= EMAC_FTR_HAS_NEW_STACR | |
| EMAC_FTR_STACR_OC_INVERT; |
| |
| /* Enable TAH/ZMII/RGMII features as found */ |
| if (dev->tah_ph != 0) { |
| #ifdef CONFIG_IBM_NEW_EMAC_TAH |
| dev->features |= EMAC_FTR_HAS_TAH; |
| #else |
| printk(KERN_ERR "%s: TAH support not enabled !\n", |
| np->full_name); |
| return -ENXIO; |
| #endif |
| } |
| |
| if (dev->zmii_ph != 0) { |
| #ifdef CONFIG_IBM_NEW_EMAC_ZMII |
| dev->features |= EMAC_FTR_HAS_ZMII; |
| #else |
| printk(KERN_ERR "%s: ZMII support not enabled !\n", |
| np->full_name); |
| return -ENXIO; |
| #endif |
| } |
| |
| if (dev->rgmii_ph != 0) { |
| #ifdef CONFIG_IBM_NEW_EMAC_RGMII |
| dev->features |= EMAC_FTR_HAS_RGMII; |
| #else |
| printk(KERN_ERR "%s: RGMII support not enabled !\n", |
| np->full_name); |
| return -ENXIO; |
| #endif |
| } |
| |
| /* Read MAC-address */ |
| p = of_get_property(np, "local-mac-address", NULL); |
| if (p == NULL) { |
| printk(KERN_ERR "%s: Can't find local-mac-address property\n", |
| np->full_name); |
| return -ENXIO; |
| } |
| memcpy(dev->ndev->dev_addr, p, 6); |
| |
| /* IAHT and GAHT filter parameterization */ |
| if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC)) { |
| dev->xaht_slots_shift = EMAC4SYNC_XAHT_SLOTS_SHIFT; |
| dev->xaht_width_shift = EMAC4SYNC_XAHT_WIDTH_SHIFT; |
| } else { |
| dev->xaht_slots_shift = EMAC4_XAHT_SLOTS_SHIFT; |
| dev->xaht_width_shift = EMAC4_XAHT_WIDTH_SHIFT; |
| } |
| |
| DBG(dev, "features : 0x%08x / 0x%08x\n", dev->features, EMAC_FTRS_POSSIBLE); |
| DBG(dev, "tx_fifo_size : %d (%d gige)\n", dev->tx_fifo_size, dev->tx_fifo_size_gige); |
| DBG(dev, "rx_fifo_size : %d (%d gige)\n", dev->rx_fifo_size, dev->rx_fifo_size_gige); |
| DBG(dev, "max_mtu : %d\n", dev->max_mtu); |
| DBG(dev, "OPB freq : %d\n", dev->opb_bus_freq); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops emac_netdev_ops = { |
| .ndo_open = emac_open, |
| .ndo_stop = emac_close, |
| .ndo_get_stats = emac_stats, |
| .ndo_set_multicast_list = emac_set_multicast_list, |
| .ndo_do_ioctl = emac_ioctl, |
| .ndo_tx_timeout = emac_tx_timeout, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_start_xmit = emac_start_xmit, |
| .ndo_change_mtu = eth_change_mtu, |
| }; |
| |
| static const struct net_device_ops emac_gige_netdev_ops = { |
| .ndo_open = emac_open, |
| .ndo_stop = emac_close, |
| .ndo_get_stats = emac_stats, |
| .ndo_set_multicast_list = emac_set_multicast_list, |
| .ndo_do_ioctl = emac_ioctl, |
| .ndo_tx_timeout = emac_tx_timeout, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_start_xmit = emac_start_xmit_sg, |
| .ndo_change_mtu = emac_change_mtu, |
| }; |
| |
| static int __devinit emac_probe(struct of_device *ofdev, |
| const struct of_device_id *match) |
| { |
| struct net_device *ndev; |
| struct emac_instance *dev; |
| struct device_node *np = ofdev->node; |
| struct device_node **blist = NULL; |
| int err, i; |
| |
| /* Skip unused/unwired EMACS. We leave the check for an unused |
| * property here for now, but new flat device trees should set a |
| * status property to "disabled" instead. |
| */ |
| if (of_get_property(np, "unused", NULL) || !of_device_is_available(np)) |
| return -ENODEV; |
| |
| /* Find ourselves in the bootlist if we are there */ |
| for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) |
| if (emac_boot_list[i] == np) |
| blist = &emac_boot_list[i]; |
| |
| /* Allocate our net_device structure */ |
| err = -ENOMEM; |
| ndev = alloc_etherdev(sizeof(struct emac_instance)); |
| if (!ndev) { |
| printk(KERN_ERR "%s: could not allocate ethernet device!\n", |
| np->full_name); |
| goto err_gone; |
| } |
| dev = netdev_priv(ndev); |
| dev->ndev = ndev; |
| dev->ofdev = ofdev; |
| dev->blist = blist; |
| SET_NETDEV_DEV(ndev, &ofdev->dev); |
| |
| /* Initialize some embedded data structures */ |
| mutex_init(&dev->mdio_lock); |
| mutex_init(&dev->link_lock); |
| spin_lock_init(&dev->lock); |
| INIT_WORK(&dev->reset_work, emac_reset_work); |
| |
| /* Init various config data based on device-tree */ |
| err = emac_init_config(dev); |
| if (err != 0) |
| goto err_free; |
| |
| /* Get interrupts. EMAC irq is mandatory, WOL irq is optional */ |
| dev->emac_irq = irq_of_parse_and_map(np, 0); |
| dev->wol_irq = irq_of_parse_and_map(np, 1); |
| if (dev->emac_irq == NO_IRQ) { |
| printk(KERN_ERR "%s: Can't map main interrupt\n", np->full_name); |
| goto err_free; |
| } |
| ndev->irq = dev->emac_irq; |
| |
| /* Map EMAC regs */ |
| if (of_address_to_resource(np, 0, &dev->rsrc_regs)) { |
| printk(KERN_ERR "%s: Can't get registers address\n", |
| np->full_name); |
| goto err_irq_unmap; |
| } |
| // TODO : request_mem_region |
| dev->emacp = ioremap(dev->rsrc_regs.start, |
| dev->rsrc_regs.end - dev->rsrc_regs.start + 1); |
| if (dev->emacp == NULL) { |
| printk(KERN_ERR "%s: Can't map device registers!\n", |
| np->full_name); |
| err = -ENOMEM; |
| goto err_irq_unmap; |
| } |
| |
| /* Wait for dependent devices */ |
| err = emac_wait_deps(dev); |
| if (err) { |
| printk(KERN_ERR |
| "%s: Timeout waiting for dependent devices\n", |
| np->full_name); |
| /* display more info about what's missing ? */ |
| goto err_reg_unmap; |
| } |
| dev->mal = dev_get_drvdata(&dev->mal_dev->dev); |
| if (dev->mdio_dev != NULL) |
| dev->mdio_instance = dev_get_drvdata(&dev->mdio_dev->dev); |
| |
| /* Register with MAL */ |
| dev->commac.ops = &emac_commac_ops; |
| dev->commac.dev = dev; |
| dev->commac.tx_chan_mask = MAL_CHAN_MASK(dev->mal_tx_chan); |
| dev->commac.rx_chan_mask = MAL_CHAN_MASK(dev->mal_rx_chan); |
| err = mal_register_commac(dev->mal, &dev->commac); |
| if (err) { |
| printk(KERN_ERR "%s: failed to register with mal %s!\n", |
| np->full_name, dev->mal_dev->node->full_name); |
| goto err_rel_deps; |
| } |
| dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); |
| dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); |
| |
| /* Get pointers to BD rings */ |
| dev->tx_desc = |
| dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, dev->mal_tx_chan); |
| dev->rx_desc = |
| dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, dev->mal_rx_chan); |
| |
| DBG(dev, "tx_desc %p" NL, dev->tx_desc); |
| DBG(dev, "rx_desc %p" NL, dev->rx_desc); |
| |
| /* Clean rings */ |
| memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); |
| memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); |
| memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *)); |
| memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *)); |
| |
| /* Attach to ZMII, if needed */ |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) && |
| (err = zmii_attach(dev->zmii_dev, dev->zmii_port, &dev->phy_mode)) != 0) |
| goto err_unreg_commac; |
| |
| /* Attach to RGMII, if needed */ |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII) && |
| (err = rgmii_attach(dev->rgmii_dev, dev->rgmii_port, dev->phy_mode)) != 0) |
| goto err_detach_zmii; |
| |
| /* Attach to TAH, if needed */ |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && |
| (err = tah_attach(dev->tah_dev, dev->tah_port)) != 0) |
| goto err_detach_rgmii; |
| |
| /* Set some link defaults before we can find out real parameters */ |
| dev->phy.speed = SPEED_100; |
| dev->phy.duplex = DUPLEX_FULL; |
| dev->phy.autoneg = AUTONEG_DISABLE; |
| dev->phy.pause = dev->phy.asym_pause = 0; |
| dev->stop_timeout = STOP_TIMEOUT_100; |
| INIT_DELAYED_WORK(&dev->link_work, emac_link_timer); |
| |
| /* Find PHY if any */ |
| err = emac_init_phy(dev); |
| if (err != 0) |
| goto err_detach_tah; |
| |
| if (dev->tah_dev) |
| ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
| ndev->watchdog_timeo = 5 * HZ; |
| if (emac_phy_supports_gige(dev->phy_mode)) { |
| ndev->netdev_ops = &emac_gige_netdev_ops; |
| dev->commac.ops = &emac_commac_sg_ops; |
| } else |
| ndev->netdev_ops = &emac_netdev_ops; |
| SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); |
| |
| netif_carrier_off(ndev); |
| netif_stop_queue(ndev); |
| |
| err = register_netdev(ndev); |
| if (err) { |
| printk(KERN_ERR "%s: failed to register net device (%d)!\n", |
| np->full_name, err); |
| goto err_detach_tah; |
| } |
| |
| /* Set our drvdata last as we don't want them visible until we are |
| * fully initialized |
| */ |
| wmb(); |
| dev_set_drvdata(&ofdev->dev, dev); |
| |
| /* There's a new kid in town ! Let's tell everybody */ |
| wake_up_all(&emac_probe_wait); |
| |
| |
| printk(KERN_INFO "%s: EMAC-%d %s, MAC %pM\n", |
| ndev->name, dev->cell_index, np->full_name, ndev->dev_addr); |
| |
| if (dev->phy_mode == PHY_MODE_SGMII) |
| printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name); |
| |
| if (dev->phy.address >= 0) |
| printk("%s: found %s PHY (0x%02x)\n", ndev->name, |
| dev->phy.def->name, dev->phy.address); |
| |
| emac_dbg_register(dev); |
| |
| /* Life is good */ |
| return 0; |
| |
| /* I have a bad feeling about this ... */ |
| |
| err_detach_tah: |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) |
| tah_detach(dev->tah_dev, dev->tah_port); |
| err_detach_rgmii: |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_detach(dev->rgmii_dev, dev->rgmii_port); |
| err_detach_zmii: |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_detach(dev->zmii_dev, dev->zmii_port); |
| err_unreg_commac: |
| mal_unregister_commac(dev->mal, &dev->commac); |
| err_rel_deps: |
| emac_put_deps(dev); |
| err_reg_unmap: |
| iounmap(dev->emacp); |
| err_irq_unmap: |
| if (dev->wol_irq != NO_IRQ) |
| irq_dispose_mapping(dev->wol_irq); |
| if (dev->emac_irq != NO_IRQ) |
| irq_dispose_mapping(dev->emac_irq); |
| err_free: |
| kfree(ndev); |
| err_gone: |
| /* if we were on the bootlist, remove us as we won't show up and |
| * wake up all waiters to notify them in case they were waiting |
| * on us |
| */ |
| if (blist) { |
| *blist = NULL; |
| wake_up_all(&emac_probe_wait); |
| } |
| return err; |
| } |
| |
| static int __devexit emac_remove(struct of_device *ofdev) |
| { |
| struct emac_instance *dev = dev_get_drvdata(&ofdev->dev); |
| |
| DBG(dev, "remove" NL); |
| |
| dev_set_drvdata(&ofdev->dev, NULL); |
| |
| unregister_netdev(dev->ndev); |
| |
| flush_scheduled_work(); |
| |
| if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) |
| tah_detach(dev->tah_dev, dev->tah_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) |
| rgmii_detach(dev->rgmii_dev, dev->rgmii_port); |
| if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) |
| zmii_detach(dev->zmii_dev, dev->zmii_port); |
| |
| mal_unregister_commac(dev->mal, &dev->commac); |
| emac_put_deps(dev); |
| |
| emac_dbg_unregister(dev); |
| iounmap(dev->emacp); |
| |
| if (dev->wol_irq != NO_IRQ) |
| irq_dispose_mapping(dev->wol_irq); |
| if (dev->emac_irq != NO_IRQ) |
| irq_dispose_mapping(dev->emac_irq); |
| |
| kfree(dev->ndev); |
| |
| return 0; |
| } |
| |
| /* XXX Features in here should be replaced by properties... */ |
| static struct of_device_id emac_match[] = |
| { |
| { |
| .type = "network", |
| .compatible = "ibm,emac", |
| }, |
| { |
| .type = "network", |
| .compatible = "ibm,emac4", |
| }, |
| { |
| .type = "network", |
| .compatible = "ibm,emac4sync", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, emac_match); |
| |
| static struct of_platform_driver emac_driver = { |
| .name = "emac", |
| .match_table = emac_match, |
| |
| .probe = emac_probe, |
| .remove = emac_remove, |
| }; |
| |
| static void __init emac_make_bootlist(void) |
| { |
| struct device_node *np = NULL; |
| int j, max, i = 0, k; |
| int cell_indices[EMAC_BOOT_LIST_SIZE]; |
| |
| /* Collect EMACs */ |
| while((np = of_find_all_nodes(np)) != NULL) { |
| const u32 *idx; |
| |
| if (of_match_node(emac_match, np) == NULL) |
| continue; |
| if (of_get_property(np, "unused", NULL)) |
| continue; |
| idx = of_get_property(np, "cell-index", NULL); |
| if (idx == NULL) |
| continue; |
| cell_indices[i] = *idx; |
| emac_boot_list[i++] = of_node_get(np); |
| if (i >= EMAC_BOOT_LIST_SIZE) { |
| of_node_put(np); |
| break; |
| } |
| } |
| max = i; |
| |
| /* Bubble sort them (doh, what a creative algorithm :-) */ |
| for (i = 0; max > 1 && (i < (max - 1)); i++) |
| for (j = i; j < max; j++) { |
| if (cell_indices[i] > cell_indices[j]) { |
| np = emac_boot_list[i]; |
| emac_boot_list[i] = emac_boot_list[j]; |
| emac_boot_list[j] = np; |
| k = cell_indices[i]; |
| cell_indices[i] = cell_indices[j]; |
| cell_indices[j] = k; |
| } |
| } |
| } |
| |
| static int __init emac_init(void) |
| { |
| int rc; |
| |
| printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); |
| |
| /* Init debug stuff */ |
| emac_init_debug(); |
| |
| /* Build EMAC boot list */ |
| emac_make_bootlist(); |
| |
| /* Init submodules */ |
| rc = mal_init(); |
| if (rc) |
| goto err; |
| rc = zmii_init(); |
| if (rc) |
| goto err_mal; |
| rc = rgmii_init(); |
| if (rc) |
| goto err_zmii; |
| rc = tah_init(); |
| if (rc) |
| goto err_rgmii; |
| rc = of_register_platform_driver(&emac_driver); |
| if (rc) |
| goto err_tah; |
| |
| return 0; |
| |
| err_tah: |
| tah_exit(); |
| err_rgmii: |
| rgmii_exit(); |
| err_zmii: |
| zmii_exit(); |
| err_mal: |
| mal_exit(); |
| err: |
| return rc; |
| } |
| |
| static void __exit emac_exit(void) |
| { |
| int i; |
| |
| of_unregister_platform_driver(&emac_driver); |
| |
| tah_exit(); |
| rgmii_exit(); |
| zmii_exit(); |
| mal_exit(); |
| emac_fini_debug(); |
| |
| /* Destroy EMAC boot list */ |
| for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) |
| if (emac_boot_list[i]) |
| of_node_put(emac_boot_list[i]); |
| } |
| |
| module_init(emac_init); |
| module_exit(emac_exit); |