arch/powerpc/sysdev/tsi108_pci.c - maze/linux - Git at Google

 /*
  * Common routines for Tundra Semiconductor TSI108 host bridge.
  *
  * 2004-2005 (c) Tundra Semiconductor Corp.
  * Author: Alex Bounine (alexandreb@tundra.com)
  * Author: Roy Zang (tie-fei.zang@freescale.com)
  * 	   Add pci interrupt router host
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
  * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc., 59
  * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>

 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/tsi108.h>
 #include <asm/tsi108_pci.h>
 #include <asm/tsi108_irq.h>
 #include <asm/prom.h>

 #undef DEBUG
 #ifdef DEBUG
 #define DBG(x...) printk(x)
 #else
 #define DBG(x...)
 #endif

 #define tsi_mk_config_addr(bus, devfunc, offset) \
 	((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)

 u32 tsi108_pci_cfg_base;
 static u32 tsi108_pci_cfg_phys;
 u32 tsi108_csr_vir_base;
 static struct irq_host *pci_irq_host;

 extern u32 get_vir_csrbase(void);
 extern u32 tsi108_read_reg(u32 reg_offset);
 extern void tsi108_write_reg(u32 reg_offset, u32 val);

 int
 tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
 			   int offset, int len, u32 val)
 {
 	volatile unsigned char *cfg_addr;
 	struct pci_controller *hose = pci_bus_to_host(bus);

 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
 			return PCIBIOS_DEVICE_NOT_FOUND;

 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
 							devfunc, offset) |
 							(offset & 0x03));

 #ifdef DEBUG
 	printk("PCI CFG write : ");
 	printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
 	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
 	printk("data = 0x%08x\n", val);
 #endif

 	switch (len) {
 	case 1:
 		out_8((u8 *) cfg_addr, val);
 		break;
 	case 2:
 		out_le16((u16 *) cfg_addr, val);
 		break;
 	default:
 		out_le32((u32 *) cfg_addr, val);
 		break;
 	}

 	return PCIBIOS_SUCCESSFUL;
 }

 void tsi108_clear_pci_error(u32 pci_cfg_base)
 {
 	u32 err_stat, err_addr, pci_stat;

 	/*
 	 * Quietly clear PB and PCI error flags set as result
 	 * of PCI/X configuration read requests.
 	 */

 	/* Read PB Error Log Registers */

 	err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
 	err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);

 	if (err_stat & TSI108_PB_ERRCS_ES) {
 		/* Clear error flag */
 		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
 				 TSI108_PB_ERRCS_ES);

 		/* Clear read error reported in PB_ISR */
 		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
 				 TSI108_PB_ISR_PBS_RD_ERR);

 		/* Clear PCI/X bus cfg errors if applicable */
 		if ((err_addr & 0xFF000000) == pci_cfg_base) {
 			pci_stat =
 			    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
 			tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
 					 pci_stat);
 		}
 	}

 	return;
 }

 #define __tsi108_read_pci_config(x, addr, op)		\
 	__asm__ __volatile__(				\
 		"	"op" %0,0,%1\n"		\
 		"1:	eieio\n"			\
 		"2:\n"					\
 		".section .fixup,\"ax\"\n"		\
 		"3:	li %0,-1\n"			\
 		"	b 2b\n"				\
 		".section __ex_table,\"a\"\n"		\
 		"	.align 2\n"			\
 		"	.long 1b,3b\n"			\
 		".text"					\
 		: "=r"(x) : "r"(addr))

 int
 tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			  int len, u32 * val)
 {
 	volatile unsigned char *cfg_addr;
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 temp;

 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;

 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
 							devfn,
 							offset) | (offset &
 								   0x03));

 	switch (len) {
 	case 1:
 		__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
 		break;
 	case 2:
 		__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
 		break;
 	default:
 		__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
 		break;
 	}

 	*val = temp;

 #ifdef DEBUG
 	if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
 		printk("PCI CFG read : ");
 		printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
 		printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
 		printk("data = 0x%x\n", *val);
 	}
 #endif
 	return PCIBIOS_SUCCESSFUL;
 }

 void tsi108_clear_pci_cfg_error(void)
 {
 	tsi108_clear_pci_error(tsi108_pci_cfg_phys);
 }

 static struct pci_ops tsi108_direct_pci_ops = {
 	.read = tsi108_direct_read_config,
 	.write = tsi108_direct_write_config,
 };

 int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 {
 	int len;
 	struct pci_controller *hose;
 	struct resource rsrc;
 	const int *bus_range;
 	int has_address = 0;

 	/* PCI Config mapping */
 	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
 	tsi108_pci_cfg_phys = cfg_phys;
 	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
 	    tsi108_pci_cfg_base);

 	/* Fetch host bridge registers address */
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);

 	/* Get bus range if any */
 	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
 	}

 	hose = pcibios_alloc_controller(dev);

 	if (!hose) {
 		printk("PCI Host bridge init failed\n");
 		return -ENOMEM;
 	}

 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;

 	(hose)->ops = &tsi108_direct_pci_ops;

 	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
 	       "Firmware bus number: %d->%d\n",
 	       rsrc.start, hose->first_busno, hose->last_busno);

 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */
 	pci_process_bridge_OF_ranges(hose, dev, primary);
 	return 0;
 }

 /*
  * Low level utility functions
  */

 static void tsi108_pci_int_mask(u_int irq)
 {
 	u_int irp_cfg;
 	int int_line = (irq - IRQ_PCI_INTAD_BASE);

 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 	mb();
 	irp_cfg |= (1 << int_line);	/* INTx_DIR = output */
 	irp_cfg &= ~(3 << (8 + (int_line * 2)));	/* INTx_TYPE = unused */
 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
 	mb();
 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 }

 static void tsi108_pci_int_unmask(u_int irq)
 {
 	u_int irp_cfg;
 	int int_line = (irq - IRQ_PCI_INTAD_BASE);

 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 	mb();
 	irp_cfg &= ~(1 << int_line);
 	irp_cfg |= (3 << (8 + (int_line * 2)));
 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
 	mb();
 }

 static void init_pci_source(void)
 {
 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
 			0x0000ff00);
 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 			TSI108_PCI_IRP_ENABLE_P_INT);
 	mb();
 }

 static inline unsigned int get_pci_source(void)
 {
 	u_int temp = 0;
 	int irq = -1;
 	int i;
 	u_int pci_irp_stat;
 	static int mask = 0;

 	/* Read PCI/X block interrupt status register */
 	pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
 	mb();

 	if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
 		/* Process Interrupt from PCI bus INTA# - INTD# lines */
 		temp =
 		    tsi108_read_reg(TSI108_PCI_OFFSET +
 				    TSI108_PCI_IRP_INTAD) & 0xf;
 		mb();
 		for (i = 0; i < 4; i++, mask++) {
 			if (temp & (1 << mask % 4)) {
 				irq = IRQ_PCI_INTA + mask % 4;
 				mask++;
 				break;
 			}
 		}

 		/* Disable interrupts from PCI block */
 		temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 		tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 				temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
 		mb();
 		(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 		mb();
 	}
 #ifdef DEBUG
 	else {
 		printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
 		pci_irp_stat =
 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
 		temp =
 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
 		mb();
 		printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
 		temp =
 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 		mb();
 		printk("cfg_ctl=0x%08x ", temp);
 		temp =
 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 		mb();
 		printk("irp_enable=0x%08x\n", temp);
 	}
 #endif	/* end of DEBUG */

 	return irq;
 }


 /*
  * Linux descriptor level callbacks
  */

 static void tsi108_pci_irq_enable(u_int irq)
 {
 	tsi108_pci_int_unmask(irq);
 }

 static void tsi108_pci_irq_disable(u_int irq)
 {
 	tsi108_pci_int_mask(irq);
 }

 static void tsi108_pci_irq_ack(u_int irq)
 {
 	tsi108_pci_int_mask(irq);
 }

 static void tsi108_pci_irq_end(u_int irq)
 {
 	tsi108_pci_int_unmask(irq);

 	/* Enable interrupts from PCI block */
 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 			 tsi108_read_reg(TSI108_PCI_OFFSET +
 					 TSI108_PCI_IRP_ENABLE) |
 			 TSI108_PCI_IRP_ENABLE_P_INT);
 	mb();
 }

 /*
  * Interrupt controller descriptor for cascaded PCI interrupt controller.
  */

 static struct irq_chip tsi108_pci_irq = {
 	.name = "tsi108_PCI_int",
 	.mask = tsi108_pci_irq_disable,
 	.ack = tsi108_pci_irq_ack,
 	.end = tsi108_pci_irq_end,
 	.unmask = tsi108_pci_irq_enable,
 };

 static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
 			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	*out_hwirq = intspec[0];
 	*out_flags = IRQ_TYPE_LEVEL_HIGH;
 	return 0;
 }

 static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {	unsigned int irq;
 	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
 	if ((virq >= 1) && (virq <= 4)){
 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
 		irq_to_desc(irq)->status |= IRQ_LEVEL;
 		set_irq_chip(irq, &tsi108_pci_irq);
 	}
 	return 0;
 }

 static struct irq_host_ops pci_irq_host_ops = {
 	.map = pci_irq_host_map,
 	.xlate = pci_irq_host_xlate,
 };

 /*
  * Exported functions
  */

 /*
  * The Tsi108 PCI interrupts initialization routine.
  *
  * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
  * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
  * PCI block has to be treated as a cascaded interrupt controller connected
  * to the MPIC.
  */

 void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");

 	pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				      0, &pci_irq_host_ops, 0);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
 		return;
 	}

 	init_pci_source();
 }

 void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq = get_pci_source();
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
 	desc->chip->eoi(irq);
 }
	/*
	* Common routines for Tundra Semiconductor TSI108 host bridge.
	*
	* 2004-2005 (c) Tundra Semiconductor Corp.
	* Author: Alex Bounine (alexandreb@tundra.com)
	* Author: Roy Zang (tie-fei.zang@freescale.com)
	* Add pci interrupt router host
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the Free
	* Software Foundation; either version 2 of the License, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc., 59
	* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/pci.h>
	#include <linux/irq.h>
	#include <linux/interrupt.h>

	#include <asm/byteorder.h>
	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/uaccess.h>
	#include <asm/machdep.h>
	#include <asm/pci-bridge.h>
	#include <asm/tsi108.h>
	#include <asm/tsi108_pci.h>
	#include <asm/tsi108_irq.h>
	#include <asm/prom.h>

	#undef DEBUG
	#ifdef DEBUG
	#define DBG(x...) printk(x)
	#else
	#define DBG(x...)
	#endif

	#define tsi_mk_config_addr(bus, devfunc, offset) \
	((((bus)<<16) \| ((devfunc)<<8) \| (offset & 0xfc)) + tsi108_pci_cfg_base)

	u32 tsi108_pci_cfg_base;
	static u32 tsi108_pci_cfg_phys;
	u32 tsi108_csr_vir_base;
	static struct irq_host *pci_irq_host;

	extern u32 get_vir_csrbase(void);
	extern u32 tsi108_read_reg(u32 reg_offset);
	extern void tsi108_write_reg(u32 reg_offset, u32 val);

	int
	tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
	int offset, int len, u32 val)
	{
	volatile unsigned char *cfg_addr;
	struct pci_controller *hose = pci_bus_to_host(bus);

	if (ppc_md.pci_exclude_device)
	if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
	return PCIBIOS_DEVICE_NOT_FOUND;

	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
	devfunc, offset) \|
	(offset & 0x03));

	#ifdef DEBUG
	printk("PCI CFG write : ");
	printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
	printk("data = 0x%08x\n", val);
	#endif

	switch (len) {
	case 1:
	out_8((u8 *) cfg_addr, val);
	break;
	case 2:
	out_le16((u16 *) cfg_addr, val);
	break;
	default:
	out_le32((u32 *) cfg_addr, val);
	break;
	}

	return PCIBIOS_SUCCESSFUL;
	}

	void tsi108_clear_pci_error(u32 pci_cfg_base)
	{
	u32 err_stat, err_addr, pci_stat;

	/*
	* Quietly clear PB and PCI error flags set as result
	* of PCI/X configuration read requests.
	*/

	/* Read PB Error Log Registers */

	err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
	err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);

	if (err_stat & TSI108_PB_ERRCS_ES) {
	/* Clear error flag */
	tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
	TSI108_PB_ERRCS_ES);

	/* Clear read error reported in PB_ISR */
	tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
	TSI108_PB_ISR_PBS_RD_ERR);

	/* Clear PCI/X bus cfg errors if applicable */
	if ((err_addr & 0xFF000000) == pci_cfg_base) {
	pci_stat =
	tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
	pci_stat);
	}
	}

	return;
	}

	#define __tsi108_read_pci_config(x, addr, op) \
	__asm__ __volatile__( \
	" "op" %0,0,%1\n" \
	"1: eieio\n" \
	"2:\n" \
	".section .fixup,\"ax\"\n" \
	"3: li %0,-1\n" \
	" b 2b\n" \
	".section __ex_table,\"a\"\n" \
	" .align 2\n" \
	" .long 1b,3b\n" \
	".text" \
	: "=r"(x) : "r"(addr))

	int
	tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
	int len, u32 * val)
	{
	volatile unsigned char *cfg_addr;
	struct pci_controller *hose = pci_bus_to_host(bus);
	u32 temp;

	if (ppc_md.pci_exclude_device)
	if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
	return PCIBIOS_DEVICE_NOT_FOUND;

	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
	devfn,
	offset) \| (offset &
	0x03));

	switch (len) {
	case 1:
	__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
	break;
	case 2:
	__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
	break;
	default:
	__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
	break;
	}

	*val = temp;

	#ifdef DEBUG
	if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
	printk("PCI CFG read : ");
	printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
	printk("data = 0x%x\n", *val);
	}
	#endif
	return PCIBIOS_SUCCESSFUL;
	}

	void tsi108_clear_pci_cfg_error(void)
	{
	tsi108_clear_pci_error(tsi108_pci_cfg_phys);
	}

	static struct pci_ops tsi108_direct_pci_ops = {
	.read = tsi108_direct_read_config,
	.write = tsi108_direct_write_config,
	};

	int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
	{
	int len;
	struct pci_controller *hose;
	struct resource rsrc;
	const int *bus_range;
	int has_address = 0;

	/* PCI Config mapping */
	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
	tsi108_pci_cfg_phys = cfg_phys;
	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
	tsi108_pci_cfg_base);

	/* Fetch host bridge registers address */
	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);

	/* Get bus range if any */
	bus_range = of_get_property(dev, "bus-range", &len);
	if (bus_range == NULL \|\| len < 2 * sizeof(int)) {
	printk(KERN_WARNING "Can't get bus-range for %s, assume"
	" bus 0\n", dev->full_name);
	}

	hose = pcibios_alloc_controller(dev);

	if (!hose) {
	printk("PCI Host bridge init failed\n");
	return -ENOMEM;
	}

	hose->first_busno = bus_range ? bus_range[0] : 0;
	hose->last_busno = bus_range ? bus_range[1] : 0xff;

	(hose)->ops = &tsi108_direct_pci_ops;

	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
	"Firmware bus number: %d->%d\n",
	rsrc.start, hose->first_busno, hose->last_busno);

	/* Interpret the "ranges" property */
	/* This also maps the I/O region and sets isa_io/mem_base */
	pci_process_bridge_OF_ranges(hose, dev, primary);
	return 0;
	}

	/*
	* Low level utility functions
	*/

	static void tsi108_pci_int_mask(u_int irq)
	{
	u_int irp_cfg;
	int int_line = (irq - IRQ_PCI_INTAD_BASE);

	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
	mb();
	irp_cfg \|= (1 << int_line); /* INTx_DIR = output */
	irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
	mb();
	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
	}

	static void tsi108_pci_int_unmask(u_int irq)
	{
	u_int irp_cfg;
	int int_line = (irq - IRQ_PCI_INTAD_BASE);

	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
	mb();
	irp_cfg &= ~(1 << int_line);
	irp_cfg \|= (3 << (8 + (int_line * 2)));
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
	mb();
	}

	static void init_pci_source(void)
	{
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
	0x0000ff00);
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
	TSI108_PCI_IRP_ENABLE_P_INT);
	mb();
	}

	static inline unsigned int get_pci_source(void)
	{
	u_int temp = 0;
	int irq = -1;
	int i;
	u_int pci_irp_stat;
	static int mask = 0;

	/* Read PCI/X block interrupt status register */
	pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
	mb();

	if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
	/* Process Interrupt from PCI bus INTA# - INTD# lines */
	temp =
	tsi108_read_reg(TSI108_PCI_OFFSET +
	TSI108_PCI_IRP_INTAD) & 0xf;
	mb();
	for (i = 0; i < 4; i++, mask++) {
	if (temp & (1 << mask % 4)) {
	irq = IRQ_PCI_INTA + mask % 4;
	mask++;
	break;
	}
	}

	/* Disable interrupts from PCI block */
	temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
	temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
	mb();
	(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
	mb();
	}
	#ifdef DEBUG
	else {
	printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
	pci_irp_stat =
	tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
	temp =
	tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
	mb();
	printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
	temp =
	tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
	mb();
	printk("cfg_ctl=0x%08x ", temp);
	temp =
	tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
	mb();
	printk("irp_enable=0x%08x\n", temp);
	}
	#endif /* end of DEBUG */

	return irq;
	}


	/*
	* Linux descriptor level callbacks
	*/

	static void tsi108_pci_irq_enable(u_int irq)
	{
	tsi108_pci_int_unmask(irq);
	}

	static void tsi108_pci_irq_disable(u_int irq)
	{
	tsi108_pci_int_mask(irq);
	}

	static void tsi108_pci_irq_ack(u_int irq)
	{
	tsi108_pci_int_mask(irq);
	}

	static void tsi108_pci_irq_end(u_int irq)
	{
	tsi108_pci_int_unmask(irq);

	/* Enable interrupts from PCI block */
	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
	tsi108_read_reg(TSI108_PCI_OFFSET +
	TSI108_PCI_IRP_ENABLE) \|
	TSI108_PCI_IRP_ENABLE_P_INT);
	mb();
	}

	/*
	* Interrupt controller descriptor for cascaded PCI interrupt controller.
	*/

	static struct irq_chip tsi108_pci_irq = {
	.name = "tsi108_PCI_int",
	.mask = tsi108_pci_irq_disable,
	.ack = tsi108_pci_irq_ack,
	.end = tsi108_pci_irq_end,
	.unmask = tsi108_pci_irq_enable,
	};

	static int pci_irq_host_xlate(struct irq_host h, struct device_node ct,
	const u32 *intspec, unsigned int intsize,
	irq_hw_number_t out_hwirq, unsigned int out_flags)
	{
	*out_hwirq = intspec[0];
	*out_flags = IRQ_TYPE_LEVEL_HIGH;
	return 0;
	}

	static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
	irq_hw_number_t hw)
	{ unsigned int irq;
	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
	if ((virq >= 1) && (virq <= 4)){
	irq = virq + IRQ_PCI_INTAD_BASE - 1;
	irq_to_desc(irq)->status \|= IRQ_LEVEL;
	set_irq_chip(irq, &tsi108_pci_irq);
	}
	return 0;
	}

	static struct irq_host_ops pci_irq_host_ops = {
	.map = pci_irq_host_map,
	.xlate = pci_irq_host_xlate,
	};

	/*
	* Exported functions
	*/

	/*
	* The Tsi108 PCI interrupts initialization routine.
	*
	* The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
	* to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
	* PCI block has to be treated as a cascaded interrupt controller connected
	* to the MPIC.
	*/

	void __init tsi108_pci_int_init(struct device_node *node)
	{
	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");

	pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
	0, &pci_irq_host_ops, 0);
	if (pci_irq_host == NULL) {
	printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
	return;
	}

	init_pci_source();
	}

	void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc)
	{
	unsigned int cascade_irq = get_pci_source();
	if (cascade_irq != NO_IRQ)
	generic_handle_irq(cascade_irq);
	desc->chip->eoi(irq);
	}