| /* |
| * linux/include/asm-arm/arch-omap/mux.h |
| * |
| * Table of the Omap register configurations for the FUNC_MUX and |
| * PULL_DWN combinations. |
| * |
| * Copyright (C) 2003 Nokia Corporation |
| * |
| * Written by Tony Lindgren <tony.lindgren@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * NOTE: Please use the following naming style for new pin entries. |
| * For example, W8_1610_MMC2_DAT0, where: |
| * - W8 = ball |
| * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 |
| * - MMC2_DAT0 = function |
| * |
| * Change log: |
| * Added entry for the I2C interface. (02Feb 2004) |
| * Copyright (C) 2004 Texas Instruments |
| * |
| * Added entry for the keypad and uwire CS1. (09Mar 2004) |
| * Copyright (C) 2004 Texas Instruments |
| * |
| */ |
| |
| #ifndef __ASM_ARCH_MUX_H |
| #define __ASM_ARCH_MUX_H |
| |
| #define PU_PD_SEL_NA 0 /* No pu_pd reg available */ |
| #define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ |
| |
| #ifdef CONFIG_OMAP_MUX_DEBUG |
| #define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ |
| .mux_reg = FUNC_MUX_CTRL_##reg, \ |
| .mask_offset = mode_offset, \ |
| .mask = mode, |
| |
| #define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ |
| .pull_reg = PULL_DWN_CTRL_##reg, \ |
| .pull_bit = bit, \ |
| .pull_val = status, |
| |
| #define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ |
| .pu_pd_reg = PU_PD_SEL_##reg, \ |
| .pu_pd_val = status, |
| |
| #else |
| |
| #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ |
| .mask_offset = mode_offset, \ |
| .mask = mode, |
| |
| #define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ |
| .pull_bit = bit, \ |
| .pull_val = status, |
| |
| #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ |
| .pu_pd_val = status, |
| |
| #endif /* CONFIG_OMAP_MUX_DEBUG */ |
| |
| #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ |
| pull_reg, pull_bit, pull_status, \ |
| pu_pd_reg, pu_pd_status, debug_status) \ |
| { \ |
| .name = desc, \ |
| .debug = debug_status, \ |
| MUX_REG(mux_reg, mode_offset, mode) \ |
| PULL_REG(pull_reg, pull_bit, pull_status) \ |
| PU_PD_REG(pu_pd_reg, pu_pd_status) \ |
| }, |
| |
| #define PULL_DISABLED 0 |
| #define PULL_ENABLED 1 |
| |
| #define PULL_DOWN 0 |
| #define PULL_UP 1 |
| |
| typedef struct { |
| char *name; |
| unsigned char busy; |
| unsigned char debug; |
| |
| const char *mux_reg_name; |
| const unsigned int mux_reg; |
| const unsigned char mask_offset; |
| const unsigned char mask; |
| |
| const char *pull_name; |
| const unsigned int pull_reg; |
| const unsigned char pull_val; |
| const unsigned char pull_bit; |
| |
| const char *pu_pd_name; |
| const unsigned int pu_pd_reg; |
| const unsigned char pu_pd_val; |
| } reg_cfg_set; |
| |
| /* |
| * Lookup table for FUNC_MUX and PULL_DWN register combinations for each |
| * device. See also reg_cfg_table below for the register values. |
| */ |
| typedef enum { |
| /* UART1 (BT_UART_GATING)*/ |
| UART1_TX = 0, |
| UART1_RTS, |
| |
| /* UART2 (COM_UART_GATING)*/ |
| UART2_TX, |
| UART2_RX, |
| UART2_CTS, |
| UART2_RTS, |
| |
| /* UART3 (GIGA_UART_GATING) */ |
| UART3_TX, |
| UART3_RX, |
| UART3_CTS, |
| UART3_RTS, |
| UART3_CLKREQ, |
| UART3_BCLK, /* 12MHz clock out */ |
| Y15_1610_UART3_RTS, |
| |
| /* PWT & PWL */ |
| PWT, |
| PWL, |
| |
| /* USB master generic */ |
| R18_USB_VBUS, |
| R18_1510_USB_GPIO0, |
| W4_USB_PUEN, |
| W4_USB_CLKO, |
| W4_USB_HIGHZ, |
| W4_GPIO58, |
| |
| /* USB1 master */ |
| USB1_SUSP, |
| USB1_SEO, |
| W13_1610_USB1_SE0, |
| USB1_TXEN, |
| USB1_TXD, |
| USB1_VP, |
| USB1_VM, |
| USB1_RCV, |
| USB1_SPEED, |
| R13_1610_USB1_SPEED, |
| R13_1710_USB1_SE0, |
| |
| /* USB2 master */ |
| USB2_SUSP, |
| USB2_VP, |
| USB2_TXEN, |
| USB2_VM, |
| USB2_RCV, |
| USB2_SEO, |
| USB2_TXD, |
| |
| /* OMAP-1510 GPIO */ |
| R18_1510_GPIO0, |
| R19_1510_GPIO1, |
| M14_1510_GPIO2, |
| |
| /* OMAP1610 GPIO */ |
| P18_1610_GPIO3, |
| Y15_1610_GPIO17, |
| |
| /* OMAP-1710 GPIO */ |
| R18_1710_GPIO0, |
| V2_1710_GPIO10, |
| N21_1710_GPIO14, |
| W15_1710_GPIO40, |
| |
| /* MPUIO */ |
| MPUIO2, |
| N15_1610_MPUIO2, |
| MPUIO4, |
| MPUIO5, |
| T20_1610_MPUIO5, |
| W11_1610_MPUIO6, |
| V10_1610_MPUIO7, |
| W11_1610_MPUIO9, |
| V10_1610_MPUIO10, |
| W10_1610_MPUIO11, |
| E20_1610_MPUIO13, |
| U20_1610_MPUIO14, |
| E19_1610_MPUIO15, |
| |
| /* MCBSP2 */ |
| MCBSP2_CLKR, |
| MCBSP2_CLKX, |
| MCBSP2_DR, |
| MCBSP2_DX, |
| MCBSP2_FSR, |
| MCBSP2_FSX, |
| |
| /* MCBSP3 */ |
| MCBSP3_CLKX, |
| |
| /* Misc ballouts */ |
| BALLOUT_V8_ARMIO3, |
| N20_HDQ, |
| |
| /* OMAP-1610 MMC2 */ |
| W8_1610_MMC2_DAT0, |
| V8_1610_MMC2_DAT1, |
| W15_1610_MMC2_DAT2, |
| R10_1610_MMC2_DAT3, |
| Y10_1610_MMC2_CLK, |
| Y8_1610_MMC2_CMD, |
| V9_1610_MMC2_CMDDIR, |
| V5_1610_MMC2_DATDIR0, |
| W19_1610_MMC2_DATDIR1, |
| R18_1610_MMC2_CLKIN, |
| |
| /* OMAP-1610 External Trace Interface */ |
| M19_1610_ETM_PSTAT0, |
| L15_1610_ETM_PSTAT1, |
| L18_1610_ETM_PSTAT2, |
| L19_1610_ETM_D0, |
| J19_1610_ETM_D6, |
| J18_1610_ETM_D7, |
| |
| /* OMAP16XX GPIO */ |
| P20_1610_GPIO4, |
| V9_1610_GPIO7, |
| W8_1610_GPIO9, |
| N20_1610_GPIO11, |
| N19_1610_GPIO13, |
| P10_1610_GPIO22, |
| V5_1610_GPIO24, |
| AA20_1610_GPIO_41, |
| W19_1610_GPIO48, |
| M7_1610_GPIO62, |
| V14_16XX_GPIO37, |
| R9_16XX_GPIO18, |
| L14_16XX_GPIO49, |
| |
| /* OMAP-1610 uWire */ |
| V19_1610_UWIRE_SCLK, |
| U18_1610_UWIRE_SDI, |
| W21_1610_UWIRE_SDO, |
| N14_1610_UWIRE_CS0, |
| P15_1610_UWIRE_CS3, |
| N15_1610_UWIRE_CS1, |
| |
| /* OMAP-1610 Flash */ |
| L3_1610_FLASH_CS2B_OE, |
| M8_1610_FLASH_CS2B_WE, |
| |
| /* First MMC */ |
| MMC_CMD, |
| MMC_DAT1, |
| MMC_DAT2, |
| MMC_DAT0, |
| MMC_CLK, |
| MMC_DAT3, |
| |
| /* OMAP-1710 MMC CMDDIR and DATDIR0 */ |
| M15_1710_MMC_CLKI, |
| P19_1710_MMC_CMDDIR, |
| P20_1710_MMC_DATDIR0, |
| |
| /* OMAP-1610 USB0 alternate pin configuration */ |
| W9_USB0_TXEN, |
| AA9_USB0_VP, |
| Y5_USB0_RCV, |
| R9_USB0_VM, |
| V6_USB0_TXD, |
| W5_USB0_SE0, |
| V9_USB0_SPEED, |
| V9_USB0_SUSP, |
| |
| /* USB2 */ |
| W9_USB2_TXEN, |
| AA9_USB2_VP, |
| Y5_USB2_RCV, |
| R9_USB2_VM, |
| V6_USB2_TXD, |
| W5_USB2_SE0, |
| |
| /* 16XX UART */ |
| R13_1610_UART1_TX, |
| V14_16XX_UART1_RX, |
| R14_1610_UART1_CTS, |
| AA15_1610_UART1_RTS, |
| R9_16XX_UART2_RX, |
| L14_16XX_UART3_RX, |
| |
| /* I2C OMAP-1610 */ |
| I2C_SCL, |
| I2C_SDA, |
| |
| /* Keypad */ |
| F18_1610_KBC0, |
| D20_1610_KBC1, |
| D19_1610_KBC2, |
| E18_1610_KBC3, |
| C21_1610_KBC4, |
| G18_1610_KBR0, |
| F19_1610_KBR1, |
| H14_1610_KBR2, |
| E20_1610_KBR3, |
| E19_1610_KBR4, |
| N19_1610_KBR5, |
| |
| /* Power management */ |
| T20_1610_LOW_PWR, |
| |
| /* MCLK Settings */ |
| V5_1710_MCLK_ON, |
| V5_1710_MCLK_OFF, |
| R10_1610_MCLK_ON, |
| R10_1610_MCLK_OFF, |
| |
| /* CompactFlash controller */ |
| P11_1610_CF_CD2, |
| R11_1610_CF_IOIS16, |
| V10_1610_CF_IREQ, |
| W10_1610_CF_RESET, |
| W11_1610_CF_CD1, |
| } reg_cfg_t; |
| |
| #if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX) |
| |
| /* |
| * Table of various FUNC_MUX and PULL_DWN combinations for each device. |
| * See also reg_cfg_t above for the lookup table. |
| */ |
| static const reg_cfg_set __initdata_or_module |
| reg_cfg_table[] = { |
| /* |
| * description mux mode mux pull pull pull pu_pd pu dbg |
| * reg offset mode reg bit ena reg |
| */ |
| MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) |
| MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) |
| |
| /* UART2 (COM_UART_GATING), conflicts with USB2 */ |
| MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) |
| MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) |
| MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) |
| MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) |
| |
| /* UART3 (GIGA_UART_GATING) */ |
| MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) |
| MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) |
| MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) |
| MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) |
| MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) |
| MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) |
| MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) |
| |
| /* PWT & PWL, conflicts with UART3 */ |
| MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) |
| MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) |
| |
| /* USB internal master generic */ |
| MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) |
| MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) |
| /* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ |
| MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) |
| MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) |
| MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) |
| MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) |
| |
| /* USB1 master */ |
| MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) |
| MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) |
| MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) |
| MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) |
| MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) |
| MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) |
| MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) |
| MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) |
| MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) |
| MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) |
| MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) |
| |
| /* USB2 master */ |
| MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) |
| MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) |
| MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) |
| MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) |
| MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) |
| MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) |
| MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) |
| |
| /* OMAP-1510 GPIO */ |
| MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) |
| MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) |
| MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) |
| |
| /* OMAP1610 GPIO */ |
| MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) |
| MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) |
| |
| /* OMAP-1710 GPIO */ |
| MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) |
| MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) |
| MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) |
| MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) |
| |
| /* MPUIO */ |
| MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) |
| MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) |
| MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) |
| MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) |
| |
| MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) |
| MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) |
| MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) |
| MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) |
| MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) |
| MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) |
| MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) |
| MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) |
| MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) |
| |
| /* MCBSP2 */ |
| MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) |
| MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) |
| MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) |
| MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) |
| MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) |
| MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) |
| |
| /* MCBSP3 NOTE: Mode must 1 for clock */ |
| MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) |
| |
| /* Misc ballouts */ |
| MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) |
| MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) |
| |
| /* OMAP-1610 MMC2 */ |
| MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) |
| MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) |
| MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) |
| MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) |
| MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) |
| MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) |
| MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) |
| MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) |
| MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) |
| MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) |
| |
| /* OMAP-1610 External Trace Interface */ |
| MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) |
| MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) |
| MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) |
| MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) |
| MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) |
| MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) |
| |
| /* OMAP16XX GPIO */ |
| MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) |
| MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) |
| MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) |
| MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) |
| MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) |
| MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) |
| MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) |
| MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) |
| MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) |
| MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) |
| MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) |
| MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) |
| MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) |
| |
| /* OMAP-1610 uWire */ |
| MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) |
| MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) |
| MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) |
| MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) |
| MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) |
| MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) |
| |
| /* OMAP-1610 Flash */ |
| MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) |
| |
| /* First MMC interface, same on 1510, 1610 and 1710 */ |
| MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) |
| MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) |
| MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) |
| MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) |
| MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) |
| MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) |
| MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) |
| MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) |
| |
| /* OMAP-1610 USB0 alternate configuration */ |
| MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) |
| MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) |
| MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) |
| MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) |
| MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) |
| MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) |
| MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) |
| MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) |
| |
| /* USB2 interface */ |
| MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) |
| MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) |
| |
| /* 16XX UART */ |
| MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) |
| MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) |
| MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) |
| MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) |
| MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) |
| MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) |
| |
| /* I2C interface */ |
| MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) |
| MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) |
| |
| /* Keypad */ |
| MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) |
| MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) |
| MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) |
| MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) |
| MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) |
| MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) |
| MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) |
| MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) |
| MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) |
| MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) |
| MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) |
| |
| /* Power management */ |
| MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) |
| |
| /* MCLK Settings */ |
| MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) |
| MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) |
| MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) |
| MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) |
| |
| /* CompactFlash controller, conflicts with MMC1 */ |
| MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) |
| MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) |
| MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) |
| MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) |
| MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) |
| }; |
| |
| #endif /* __MUX_C__ */ |
| |
| #ifdef CONFIG_OMAP_MUX |
| /* setup pin muxing in Linux */ |
| extern int omap_cfg_reg(reg_cfg_t reg_cfg); |
| #else |
| /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ |
| static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; } |
| #endif |
| |
| #endif |
