| /* |
| * Freescale MXS SPI master driver |
| * |
| * Copyright 2012 DENX Software Engineering, GmbH. |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. |
| * |
| * Rework and transition to new API by: |
| * Marek Vasut <marex@denx.de> |
| * |
| * Based on previous attempt by: |
| * Fabio Estevam <fabio.estevam@freescale.com> |
| * |
| * Based on code from U-Boot bootloader by: |
| * Marek Vasut <marex@denx.de> |
| * |
| * Based on spi-stmp.c, which is: |
| * Author: Dmitry Pervushin <dimka@embeddedalley.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/highmem.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/completion.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/module.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/stmp_device.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/mxs-spi.h> |
| |
| #define DRIVER_NAME "mxs-spi" |
| |
| /* Use 10S timeout for very long transfers, it should suffice. */ |
| #define SSP_TIMEOUT 10000 |
| |
| #define SG_MAXLEN 0xff00 |
| |
| struct mxs_spi { |
| struct mxs_ssp ssp; |
| struct completion c; |
| }; |
| |
| static int mxs_spi_setup_transfer(struct spi_device *dev, |
| struct spi_transfer *t) |
| { |
| struct mxs_spi *spi = spi_master_get_devdata(dev->master); |
| struct mxs_ssp *ssp = &spi->ssp; |
| uint8_t bits_per_word; |
| uint32_t hz = 0; |
| |
| bits_per_word = dev->bits_per_word; |
| if (t && t->bits_per_word) |
| bits_per_word = t->bits_per_word; |
| |
| if (bits_per_word != 8) { |
| dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n", |
| __func__, bits_per_word); |
| return -EINVAL; |
| } |
| |
| hz = dev->max_speed_hz; |
| if (t && t->speed_hz) |
| hz = min(hz, t->speed_hz); |
| if (hz == 0) { |
| dev_err(&dev->dev, "Cannot continue with zero clock\n"); |
| return -EINVAL; |
| } |
| |
| mxs_ssp_set_clk_rate(ssp, hz); |
| |
| writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) | |
| BF_SSP_CTRL1_WORD_LENGTH |
| (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) | |
| ((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | |
| ((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0), |
| ssp->base + HW_SSP_CTRL1(ssp)); |
| |
| writel(0x0, ssp->base + HW_SSP_CMD0); |
| writel(0x0, ssp->base + HW_SSP_CMD1); |
| |
| return 0; |
| } |
| |
| static int mxs_spi_setup(struct spi_device *dev) |
| { |
| int err = 0; |
| |
| if (!dev->bits_per_word) |
| dev->bits_per_word = 8; |
| |
| if (dev->mode & ~(SPI_CPOL | SPI_CPHA)) |
| return -EINVAL; |
| |
| err = mxs_spi_setup_transfer(dev, NULL); |
| if (err) { |
| dev_err(&dev->dev, |
| "Failed to setup transfer, error = %d\n", err); |
| } |
| |
| return err; |
| } |
| |
| static uint32_t mxs_spi_cs_to_reg(unsigned cs) |
| { |
| uint32_t select = 0; |
| |
| /* |
| * i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0 |
| * |
| * The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ |
| * in HW_SSP_CTRL0 register do have multiple usage, please refer to |
| * the datasheet for further details. In SPI mode, they are used to |
| * toggle the chip-select lines (nCS pins). |
| */ |
| if (cs & 1) |
| select |= BM_SSP_CTRL0_WAIT_FOR_CMD; |
| if (cs & 2) |
| select |= BM_SSP_CTRL0_WAIT_FOR_IRQ; |
| |
| return select; |
| } |
| |
| static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs) |
| { |
| const uint32_t mask = |
| BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ; |
| uint32_t select; |
| struct mxs_ssp *ssp = &spi->ssp; |
| |
| writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); |
| select = mxs_spi_cs_to_reg(cs); |
| writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| } |
| |
| static inline void mxs_spi_enable(struct mxs_spi *spi) |
| { |
| struct mxs_ssp *ssp = &spi->ssp; |
| |
| writel(BM_SSP_CTRL0_LOCK_CS, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| writel(BM_SSP_CTRL0_IGNORE_CRC, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); |
| } |
| |
| static inline void mxs_spi_disable(struct mxs_spi *spi) |
| { |
| struct mxs_ssp *ssp = &spi->ssp; |
| |
| writel(BM_SSP_CTRL0_LOCK_CS, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); |
| writel(BM_SSP_CTRL0_IGNORE_CRC, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| } |
| |
| static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set) |
| { |
| const unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT); |
| struct mxs_ssp *ssp = &spi->ssp; |
| uint32_t reg; |
| |
| do { |
| reg = readl_relaxed(ssp->base + offset); |
| |
| if (!set) |
| reg = ~reg; |
| |
| reg &= mask; |
| |
| if (reg == mask) |
| return 0; |
| } while (time_before(jiffies, timeout)); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void mxs_ssp_dma_irq_callback(void *param) |
| { |
| struct mxs_spi *spi = param; |
| complete(&spi->c); |
| } |
| |
| static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id) |
| { |
| struct mxs_ssp *ssp = dev_id; |
| dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n", |
| __func__, __LINE__, |
| readl(ssp->base + HW_SSP_CTRL1(ssp)), |
| readl(ssp->base + HW_SSP_STATUS(ssp))); |
| return IRQ_HANDLED; |
| } |
| |
| static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, |
| unsigned char *buf, int len, |
| int *first, int *last, int write) |
| { |
| struct mxs_ssp *ssp = &spi->ssp; |
| struct dma_async_tx_descriptor *desc = NULL; |
| const bool vmalloced_buf = is_vmalloc_addr(buf); |
| const int desc_len = vmalloced_buf ? PAGE_SIZE : SG_MAXLEN; |
| const int sgs = DIV_ROUND_UP(len, desc_len); |
| int sg_count; |
| int min, ret; |
| uint32_t ctrl0; |
| struct page *vm_page; |
| void *sg_buf; |
| struct { |
| uint32_t pio[4]; |
| struct scatterlist sg; |
| } *dma_xfer; |
| |
| if (!len) |
| return -EINVAL; |
| |
| dma_xfer = kzalloc(sizeof(*dma_xfer) * sgs, GFP_KERNEL); |
| if (!dma_xfer) |
| return -ENOMEM; |
| |
| INIT_COMPLETION(spi->c); |
| |
| ctrl0 = readl(ssp->base + HW_SSP_CTRL0); |
| ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; |
| ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs); |
| |
| if (*first) |
| ctrl0 |= BM_SSP_CTRL0_LOCK_CS; |
| if (!write) |
| ctrl0 |= BM_SSP_CTRL0_READ; |
| |
| /* Queue the DMA data transfer. */ |
| for (sg_count = 0; sg_count < sgs; sg_count++) { |
| min = min(len, desc_len); |
| |
| /* Prepare the transfer descriptor. */ |
| if ((sg_count + 1 == sgs) && *last) |
| ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC; |
| |
| if (ssp->devid == IMX23_SSP) { |
| ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; |
| ctrl0 |= min; |
| } |
| |
| dma_xfer[sg_count].pio[0] = ctrl0; |
| dma_xfer[sg_count].pio[3] = min; |
| |
| if (vmalloced_buf) { |
| vm_page = vmalloc_to_page(buf); |
| if (!vm_page) { |
| ret = -ENOMEM; |
| goto err_vmalloc; |
| } |
| sg_buf = page_address(vm_page) + |
| ((size_t)buf & ~PAGE_MASK); |
| } else { |
| sg_buf = buf; |
| } |
| |
| sg_init_one(&dma_xfer[sg_count].sg, sg_buf, min); |
| ret = dma_map_sg(ssp->dev, &dma_xfer[sg_count].sg, 1, |
| write ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| |
| len -= min; |
| buf += min; |
| |
| /* Queue the PIO register write transfer. */ |
| desc = dmaengine_prep_slave_sg(ssp->dmach, |
| (struct scatterlist *)dma_xfer[sg_count].pio, |
| (ssp->devid == IMX23_SSP) ? 1 : 4, |
| DMA_TRANS_NONE, |
| sg_count ? DMA_PREP_INTERRUPT : 0); |
| if (!desc) { |
| dev_err(ssp->dev, |
| "Failed to get PIO reg. write descriptor.\n"); |
| ret = -EINVAL; |
| goto err_mapped; |
| } |
| |
| desc = dmaengine_prep_slave_sg(ssp->dmach, |
| &dma_xfer[sg_count].sg, 1, |
| write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| |
| if (!desc) { |
| dev_err(ssp->dev, |
| "Failed to get DMA data write descriptor.\n"); |
| ret = -EINVAL; |
| goto err_mapped; |
| } |
| } |
| |
| /* |
| * The last descriptor must have this callback, |
| * to finish the DMA transaction. |
| */ |
| desc->callback = mxs_ssp_dma_irq_callback; |
| desc->callback_param = spi; |
| |
| /* Start the transfer. */ |
| dmaengine_submit(desc); |
| dma_async_issue_pending(ssp->dmach); |
| |
| ret = wait_for_completion_timeout(&spi->c, |
| msecs_to_jiffies(SSP_TIMEOUT)); |
| if (!ret) { |
| dev_err(ssp->dev, "DMA transfer timeout\n"); |
| ret = -ETIMEDOUT; |
| dmaengine_terminate_all(ssp->dmach); |
| goto err_vmalloc; |
| } |
| |
| ret = 0; |
| |
| err_vmalloc: |
| while (--sg_count >= 0) { |
| err_mapped: |
| dma_unmap_sg(ssp->dev, &dma_xfer[sg_count].sg, 1, |
| write ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| } |
| |
| kfree(dma_xfer); |
| |
| return ret; |
| } |
| |
| static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs, |
| unsigned char *buf, int len, |
| int *first, int *last, int write) |
| { |
| struct mxs_ssp *ssp = &spi->ssp; |
| |
| if (*first) |
| mxs_spi_enable(spi); |
| |
| mxs_spi_set_cs(spi, cs); |
| |
| while (len--) { |
| if (*last && len == 0) |
| mxs_spi_disable(spi); |
| |
| if (ssp->devid == IMX23_SSP) { |
| writel(BM_SSP_CTRL0_XFER_COUNT, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); |
| writel(1, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| } else { |
| writel(1, ssp->base + HW_SSP_XFER_SIZE); |
| } |
| |
| if (write) |
| writel(BM_SSP_CTRL0_READ, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); |
| else |
| writel(BM_SSP_CTRL0_READ, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| |
| writel(BM_SSP_CTRL0_RUN, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| |
| if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1)) |
| return -ETIMEDOUT; |
| |
| if (write) |
| writel(*buf, ssp->base + HW_SSP_DATA(ssp)); |
| |
| writel(BM_SSP_CTRL0_DATA_XFER, |
| ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); |
| |
| if (!write) { |
| if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp), |
| BM_SSP_STATUS_FIFO_EMPTY, 0)) |
| return -ETIMEDOUT; |
| |
| *buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff); |
| } |
| |
| if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0)) |
| return -ETIMEDOUT; |
| |
| buf++; |
| } |
| |
| if (len <= 0) |
| return 0; |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int mxs_spi_transfer_one(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct mxs_spi *spi = spi_master_get_devdata(master); |
| struct mxs_ssp *ssp = &spi->ssp; |
| int first, last; |
| struct spi_transfer *t, *tmp_t; |
| int status = 0; |
| int cs; |
| |
| first = last = 0; |
| |
| cs = m->spi->chip_select; |
| |
| list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { |
| |
| status = mxs_spi_setup_transfer(m->spi, t); |
| if (status) |
| break; |
| |
| if (&t->transfer_list == m->transfers.next) |
| first = 1; |
| if (&t->transfer_list == m->transfers.prev) |
| last = 1; |
| if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) { |
| dev_err(ssp->dev, |
| "Cannot send and receive simultaneously\n"); |
| status = -EINVAL; |
| break; |
| } |
| |
| /* |
| * Small blocks can be transfered via PIO. |
| * Measured by empiric means: |
| * |
| * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1 |
| * |
| * DMA only: 2.164808 seconds, 473.0KB/s |
| * Combined: 1.676276 seconds, 610.9KB/s |
| */ |
| if (t->len < 32) { |
| writel(BM_SSP_CTRL1_DMA_ENABLE, |
| ssp->base + HW_SSP_CTRL1(ssp) + |
| STMP_OFFSET_REG_CLR); |
| |
| if (t->tx_buf) |
| status = mxs_spi_txrx_pio(spi, cs, |
| (void *)t->tx_buf, |
| t->len, &first, &last, 1); |
| if (t->rx_buf) |
| status = mxs_spi_txrx_pio(spi, cs, |
| t->rx_buf, t->len, |
| &first, &last, 0); |
| } else { |
| writel(BM_SSP_CTRL1_DMA_ENABLE, |
| ssp->base + HW_SSP_CTRL1(ssp) + |
| STMP_OFFSET_REG_SET); |
| |
| if (t->tx_buf) |
| status = mxs_spi_txrx_dma(spi, cs, |
| (void *)t->tx_buf, t->len, |
| &first, &last, 1); |
| if (t->rx_buf) |
| status = mxs_spi_txrx_dma(spi, cs, |
| t->rx_buf, t->len, |
| &first, &last, 0); |
| } |
| |
| if (status) { |
| stmp_reset_block(ssp->base); |
| break; |
| } |
| |
| m->actual_length += t->len; |
| first = last = 0; |
| } |
| |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| return status; |
| } |
| |
| static const struct of_device_id mxs_spi_dt_ids[] = { |
| { .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, }, |
| { .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids); |
| |
| static int mxs_spi_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(mxs_spi_dt_ids, &pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| struct spi_master *master; |
| struct mxs_spi *spi; |
| struct mxs_ssp *ssp; |
| struct resource *iores; |
| struct pinctrl *pinctrl; |
| struct clk *clk; |
| void __iomem *base; |
| int devid, clk_freq; |
| int ret = 0, irq_err; |
| |
| /* |
| * Default clock speed for the SPI core. 160MHz seems to |
| * work reasonably well with most SPI flashes, so use this |
| * as a default. Override with "clock-frequency" DT prop. |
| */ |
| const int clk_freq_default = 160000000; |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq_err = platform_get_irq(pdev, 0); |
| if (!iores || irq_err < 0) |
| return -EINVAL; |
| |
| base = devm_ioremap_resource(&pdev->dev, iores); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| pinctrl = devm_pinctrl_get_select_default(&pdev->dev); |
| if (IS_ERR(pinctrl)) |
| return PTR_ERR(pinctrl); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| devid = (enum mxs_ssp_id) of_id->data; |
| ret = of_property_read_u32(np, "clock-frequency", |
| &clk_freq); |
| if (ret) |
| clk_freq = clk_freq_default; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*spi)); |
| if (!master) |
| return -ENOMEM; |
| |
| master->transfer_one_message = mxs_spi_transfer_one; |
| master->setup = mxs_spi_setup; |
| master->mode_bits = SPI_CPOL | SPI_CPHA; |
| master->num_chipselect = 3; |
| master->dev.of_node = np; |
| master->flags = SPI_MASTER_HALF_DUPLEX; |
| |
| spi = spi_master_get_devdata(master); |
| ssp = &spi->ssp; |
| ssp->dev = &pdev->dev; |
| ssp->clk = clk; |
| ssp->base = base; |
| ssp->devid = devid; |
| |
| init_completion(&spi->c); |
| |
| ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0, |
| DRIVER_NAME, ssp); |
| if (ret) |
| goto out_master_free; |
| |
| ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); |
| if (!ssp->dmach) { |
| dev_err(ssp->dev, "Failed to request DMA\n"); |
| ret = -ENODEV; |
| goto out_master_free; |
| } |
| |
| clk_prepare_enable(ssp->clk); |
| clk_set_rate(ssp->clk, clk_freq); |
| ssp->clk_rate = clk_get_rate(ssp->clk) / 1000; |
| |
| stmp_reset_block(ssp->base); |
| |
| platform_set_drvdata(pdev, master); |
| |
| ret = spi_register_master(master); |
| if (ret) { |
| dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret); |
| goto out_free_dma; |
| } |
| |
| return 0; |
| |
| out_free_dma: |
| dma_release_channel(ssp->dmach); |
| clk_disable_unprepare(ssp->clk); |
| out_master_free: |
| spi_master_put(master); |
| return ret; |
| } |
| |
| static int mxs_spi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct mxs_spi *spi; |
| struct mxs_ssp *ssp; |
| |
| master = spi_master_get(platform_get_drvdata(pdev)); |
| spi = spi_master_get_devdata(master); |
| ssp = &spi->ssp; |
| |
| spi_unregister_master(master); |
| |
| dma_release_channel(ssp->dmach); |
| |
| clk_disable_unprepare(ssp->clk); |
| |
| spi_master_put(master); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mxs_spi_driver = { |
| .probe = mxs_spi_probe, |
| .remove = mxs_spi_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = mxs_spi_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(mxs_spi_driver); |
| |
| MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); |
| MODULE_DESCRIPTION("MXS SPI master driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:mxs-spi"); |