| /* ibmtr.c: A shared-memory IBM Token Ring 16/4 driver for linux |
| * |
| * Written 1993 by Mark Swanson and Peter De Schrijver. |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * This device driver should work with Any IBM Token Ring Card that does |
| * not use DMA. |
| * |
| * I used Donald Becker's (becker@scyld.com) device driver work |
| * as a base for most of my initial work. |
| * |
| * Changes by Peter De Schrijver |
| * (Peter.Deschrijver@linux.cc.kuleuven.ac.be) : |
| * |
| * + changed name to ibmtr.c in anticipation of other tr boards. |
| * + changed reset code and adapter open code. |
| * + added SAP open code. |
| * + a first attempt to write interrupt, transmit and receive routines. |
| * |
| * Changes by David W. Morris (dwm@shell.portal.com) : |
| * 941003 dwm: - Restructure tok_probe for multiple adapters, devices. |
| * + Add comments, misc reorg for clarity. |
| * + Flatten interrupt handler levels. |
| * |
| * Changes by Farzad Farid (farzy@zen.via.ecp.fr) |
| * and Pascal Andre (andre@chimay.via.ecp.fr) (March 9 1995) : |
| * + multi ring support clean up. |
| * + RFC1042 compliance enhanced. |
| * |
| * Changes by Pascal Andre (andre@chimay.via.ecp.fr) (September 7 1995) : |
| * + bug correction in tr_tx |
| * + removed redundant information display |
| * + some code reworking |
| * |
| * Changes by Michel Lespinasse (walken@via.ecp.fr), |
| * Yann Doussot (doussot@via.ecp.fr) and Pascal Andre (andre@via.ecp.fr) |
| * (February 18, 1996) : |
| * + modified shared memory and mmio access port the driver to |
| * alpha platform (structure access -> readb/writeb) |
| * |
| * Changes by Steve Kipisz (bungy@ibm.net or kipisz@vnet.ibm.com) |
| * (January 18 1996): |
| * + swapped WWOR and WWCR in ibmtr.h |
| * + moved some init code from tok_probe into trdev_init. The |
| * PCMCIA code can call trdev_init to complete initializing |
| * the driver. |
| * + added -DPCMCIA to support PCMCIA |
| * + detecting PCMCIA Card Removal in interrupt handler. If |
| * ISRP is FF, then a PCMCIA card has been removed |
| * 10/2000 Burt needed a new method to avoid crashing the OS |
| * |
| * Changes by Paul Norton (pnorton@cts.com) : |
| * + restructured the READ.LOG logic to prevent the transmit SRB |
| * from being rudely overwritten before the transmit cycle is |
| * complete. (August 15 1996) |
| * + completed multiple adapter support. (November 20 1996) |
| * + implemented csum_partial_copy in tr_rx and increased receive |
| * buffer size and count. Minor fixes. (March 15, 1997) |
| * |
| * Changes by Christopher Turcksin <wabbit@rtfc.demon.co.uk> |
| * + Now compiles ok as a module again. |
| * |
| * Changes by Paul Norton (pnorton@ieee.org) : |
| * + moved the header manipulation code in tr_tx and tr_rx to |
| * net/802/tr.c. (July 12 1997) |
| * + add retry and timeout on open if cable disconnected. (May 5 1998) |
| * + lifted 2000 byte mtu limit. now depends on shared-RAM size. |
| * May 25 1998) |
| * + can't allocate 2k recv buff at 8k shared-RAM. (20 October 1998) |
| * |
| * Changes by Joel Sloan (jjs@c-me.com) : |
| * + disable verbose debug messages by default - to enable verbose |
| * debugging, edit the IBMTR_DEBUG_MESSAGES define below |
| * |
| * Changes by Mike Phillips <phillim@amtrak.com> : |
| * + Added extra #ifdef's to work with new PCMCIA Token Ring Code. |
| * The PCMCIA code now just sets up the card so it can be recognized |
| * by ibmtr_probe. Also checks allocated memory vs. on-board memory |
| * for correct figure to use. |
| * |
| * Changes by Tim Hockin (thockin@isunix.it.ilstu.edu) : |
| * + added spinlocks for SMP sanity (10 March 1999) |
| * |
| * Changes by Jochen Friedrich to enable RFC1469 Option 2 multicasting |
| * i.e. using functional address C0 00 00 04 00 00 to transmit and |
| * receive multicast packets. |
| * |
| * Changes by Mike Sullivan (based on original sram patch by Dave Grothe |
| * to support windowing into on adapter shared ram. |
| * i.e. Use LANAID to setup a PnP configuration with 16K RAM. Paging |
| * will shift this 16K window over the entire available shared RAM. |
| * |
| * Changes by Peter De Schrijver (p2@mind.be) : |
| * + fixed a problem with PCMCIA card removal |
| * |
| * Change by Mike Sullivan et al.: |
| * + added turbo card support. No need to use lanaid to configure |
| * the adapter into isa compatiblity mode. |
| * |
| * Changes by Burt Silverman to allow the computer to behave nicely when |
| * a cable is pulled or not in place, or a PCMCIA card is removed hot. |
| */ |
| |
| /* change the define of IBMTR_DEBUG_MESSAGES to a nonzero value |
| in the event that chatty debug messages are desired - jjs 12/30/98 */ |
| |
| #define IBMTR_DEBUG_MESSAGES 0 |
| |
| #include <linux/module.h> |
| |
| #ifdef PCMCIA /* required for ibmtr_cs.c to build */ |
| #undef MODULE /* yes, really */ |
| #undef ENABLE_PAGING |
| #else |
| #define ENABLE_PAGING 1 |
| #endif |
| |
| /* changes the output format of driver initialization */ |
| #define TR_VERBOSE 0 |
| |
| /* some 95 OS send many non UI frame; this allow removing the warning */ |
| #define TR_FILTERNONUI 1 |
| |
| #include <linux/ioport.h> |
| #include <linux/netdevice.h> |
| #include <linux/ip.h> |
| #include <linux/trdevice.h> |
| #include <linux/ibmtr.h> |
| |
| #include <net/checksum.h> |
| |
| #include <asm/io.h> |
| |
| #define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args) |
| #define DPRINTD(format, args...) DummyCall("%s: " format, dev->name , ## args) |
| |
| /* version and credits */ |
| #ifndef PCMCIA |
| static char version[] __devinitdata = |
| "\nibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson\n" |
| " v2.1.125 10/20/98 Paul Norton <pnorton@ieee.org>\n" |
| " v2.2.0 12/30/98 Joel Sloan <jjs@c-me.com>\n" |
| " v2.2.1 02/08/00 Mike Sullivan <sullivam@us.ibm.com>\n" |
| " v2.2.2 07/27/00 Burt Silverman <burts@us.ibm.com>\n" |
| " v2.4.0 03/01/01 Mike Sullivan <sullivan@us.ibm.com>\n"; |
| #endif |
| |
| /* this allows displaying full adapter information */ |
| |
| static char *channel_def[] __devinitdata = { "ISA", "MCA", "ISA P&P" }; |
| |
| static char pcchannelid[] __devinitdata = { |
| 0x05, 0x00, 0x04, 0x09, |
| 0x04, 0x03, 0x04, 0x0f, |
| 0x03, 0x06, 0x03, 0x01, |
| 0x03, 0x01, 0x03, 0x00, |
| 0x03, 0x09, 0x03, 0x09, |
| 0x03, 0x00, 0x02, 0x00 |
| }; |
| |
| static char mcchannelid[] __devinitdata = { |
| 0x04, 0x0d, 0x04, 0x01, |
| 0x05, 0x02, 0x05, 0x03, |
| 0x03, 0x06, 0x03, 0x03, |
| 0x05, 0x08, 0x03, 0x04, |
| 0x03, 0x05, 0x03, 0x01, |
| 0x03, 0x08, 0x02, 0x00 |
| }; |
| |
| static char __devinit *adapter_def(char type) |
| { |
| switch (type) { |
| case 0xF: return "PC Adapter | PC Adapter II | Adapter/A"; |
| case 0xE: return "16/4 Adapter | 16/4 Adapter/A (long)"; |
| case 0xD: return "16/4 Adapter/A (short) | 16/4 ISA-16 Adapter"; |
| case 0xC: return "Auto 16/4 Adapter"; |
| default: return "adapter (unknown type)"; |
| }; |
| }; |
| |
| #define TRC_INIT 0x01 /* Trace initialization & PROBEs */ |
| #define TRC_INITV 0x02 /* verbose init trace points */ |
| static unsigned char ibmtr_debug_trace = 0; |
| |
| static int ibmtr_probe1(struct net_device *dev, int ioaddr); |
| static unsigned char get_sram_size(struct tok_info *adapt_info); |
| static int trdev_init(struct net_device *dev); |
| static int tok_open(struct net_device *dev); |
| static int tok_init_card(struct net_device *dev); |
| static void tok_open_adapter(unsigned long dev_addr); |
| static void open_sap(unsigned char type, struct net_device *dev); |
| static void tok_set_multicast_list(struct net_device *dev); |
| static int tok_send_packet(struct sk_buff *skb, struct net_device *dev); |
| static int tok_close(struct net_device *dev); |
| static irqreturn_t tok_interrupt(int irq, void *dev_id); |
| static void initial_tok_int(struct net_device *dev); |
| static void tr_tx(struct net_device *dev); |
| static void tr_rx(struct net_device *dev); |
| static void ibmtr_reset_timer(struct timer_list*tmr,struct net_device *dev); |
| static void tok_rerun(unsigned long dev_addr); |
| static void ibmtr_readlog(struct net_device *dev); |
| static int ibmtr_change_mtu(struct net_device *dev, int mtu); |
| static void find_turbo_adapters(int *iolist); |
| |
| static int ibmtr_portlist[IBMTR_MAX_ADAPTERS+1] __devinitdata = { |
| 0xa20, 0xa24, 0, 0, 0 |
| }; |
| static int __devinitdata turbo_io[IBMTR_MAX_ADAPTERS] = {0}; |
| static int __devinitdata turbo_irq[IBMTR_MAX_ADAPTERS] = {0}; |
| static int __devinitdata turbo_searched = 0; |
| |
| #ifndef PCMCIA |
| static __u32 ibmtr_mem_base __devinitdata = 0xd0000; |
| #endif |
| |
| static void __devinit PrtChanID(char *pcid, short stride) |
| { |
| short i, j; |
| for (i = 0, j = 0; i < 24; i++, j += stride) |
| printk("%1x", ((int) pcid[j]) & 0x0f); |
| printk("\n"); |
| } |
| |
| static void __devinit HWPrtChanID(void __iomem *pcid, short stride) |
| { |
| short i, j; |
| for (i = 0, j = 0; i < 24; i++, j += stride) |
| printk("%1x", ((int) readb(pcid + j)) & 0x0f); |
| printk("\n"); |
| } |
| |
| /* We have to ioremap every checked address, because isa_readb is |
| * going away. |
| */ |
| |
| static void __devinit find_turbo_adapters(int *iolist) |
| { |
| int ram_addr; |
| int index=0; |
| void __iomem *chanid; |
| int found_turbo=0; |
| unsigned char *tchanid, ctemp; |
| int i, j; |
| unsigned long jif; |
| void __iomem *ram_mapped ; |
| |
| if (turbo_searched == 1) return; |
| turbo_searched=1; |
| for (ram_addr=0xC0000; ram_addr < 0xE0000; ram_addr+=0x2000) { |
| |
| __u32 intf_tbl=0; |
| |
| found_turbo=1; |
| ram_mapped = ioremap((u32)ram_addr,0x1fff) ; |
| if (ram_mapped==NULL) |
| continue ; |
| chanid=(CHANNEL_ID + ram_mapped); |
| tchanid=pcchannelid; |
| ctemp=readb(chanid) & 0x0f; |
| if (ctemp != *tchanid) continue; |
| for (i=2,j=1; i<=46; i=i+2,j++) { |
| if ((readb(chanid+i) & 0x0f) != tchanid[j]){ |
| found_turbo=0; |
| break; |
| } |
| } |
| if (!found_turbo) continue; |
| |
| writeb(0x90, ram_mapped+0x1E01); |
| for(i=2; i<0x0f; i++) { |
| writeb(0x00, ram_mapped+0x1E01+i); |
| } |
| writeb(0x00, ram_mapped+0x1E01); |
| for(jif=jiffies+TR_BUSY_INTERVAL; time_before_eq(jiffies,jif);); |
| intf_tbl=ntohs(readw(ram_mapped+ACA_OFFSET+ACA_RW+WRBR_EVEN)); |
| if (intf_tbl) { |
| #if IBMTR_DEBUG_MESSAGES |
| printk("ibmtr::find_turbo_adapters, Turbo found at " |
| "ram_addr %x\n",ram_addr); |
| printk("ibmtr::find_turbo_adapters, interface_table "); |
| for(i=0; i<6; i++) { |
| printk("%x:",readb(ram_addr+intf_tbl+i)); |
| } |
| printk("\n"); |
| #endif |
| turbo_io[index]=ntohs(readw(ram_mapped+intf_tbl+4)); |
| turbo_irq[index]=readb(ram_mapped+intf_tbl+3); |
| outb(0, turbo_io[index] + ADAPTRESET); |
| for(jif=jiffies+TR_RST_TIME;time_before_eq(jiffies,jif);); |
| outb(0, turbo_io[index] + ADAPTRESETREL); |
| index++; |
| continue; |
| } |
| #if IBMTR_DEBUG_MESSAGES |
| printk("ibmtr::find_turbo_adapters, ibmtr card found at" |
| " %x but not a Turbo model\n",ram_addr); |
| #endif |
| iounmap(ram_mapped) ; |
| } /* for */ |
| for(i=0; i<IBMTR_MAX_ADAPTERS; i++) { |
| if(!turbo_io[i]) break; |
| for (j=0; j<IBMTR_MAX_ADAPTERS; j++) { |
| if ( iolist[j] && iolist[j] != turbo_io[i]) continue; |
| iolist[j]=turbo_io[i]; |
| break; |
| } |
| } |
| } |
| |
| static void ibmtr_cleanup_card(struct net_device *dev) |
| { |
| if (dev->base_addr) { |
| outb(0,dev->base_addr+ADAPTRESET); |
| |
| schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ |
| |
| outb(0,dev->base_addr+ADAPTRESETREL); |
| } |
| |
| #ifndef PCMCIA |
| free_irq(dev->irq, dev); |
| release_region(dev->base_addr, IBMTR_IO_EXTENT); |
| |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| iounmap(ti->mmio); |
| iounmap(ti->sram_virt); |
| } |
| #endif |
| } |
| |
| /**************************************************************************** |
| * ibmtr_probe(): Routine specified in the network device structure |
| * to probe for an IBM Token Ring Adapter. Routine outline: |
| * I. Interrogate hardware to determine if an adapter exists |
| * and what the speeds and feeds are |
| * II. Setup data structures to control execution based upon |
| * adapter characteristics. |
| * |
| * We expect ibmtr_probe to be called once for each device entry |
| * which references it. |
| ****************************************************************************/ |
| |
| static int __devinit ibmtr_probe(struct net_device *dev) |
| { |
| int i; |
| int base_addr = dev->base_addr; |
| |
| if (base_addr && base_addr <= 0x1ff) /* Don't probe at all. */ |
| return -ENXIO; |
| if (base_addr > 0x1ff) { /* Check a single specified location. */ |
| if (!ibmtr_probe1(dev, base_addr)) return 0; |
| return -ENODEV; |
| } |
| find_turbo_adapters(ibmtr_portlist); |
| for (i = 0; ibmtr_portlist[i]; i++) { |
| int ioaddr = ibmtr_portlist[i]; |
| |
| if (!ibmtr_probe1(dev, ioaddr)) return 0; |
| } |
| return -ENODEV; |
| } |
| |
| int __devinit ibmtr_probe_card(struct net_device *dev) |
| { |
| int err = ibmtr_probe(dev); |
| if (!err) { |
| err = register_netdev(dev); |
| if (err) |
| ibmtr_cleanup_card(dev); |
| } |
| return err; |
| } |
| |
| /*****************************************************************************/ |
| |
| static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) |
| { |
| |
| unsigned char segment, intr=0, irq=0, i, j, cardpresent=NOTOK, temp=0; |
| void __iomem * t_mmio = NULL; |
| struct tok_info *ti = netdev_priv(dev); |
| void __iomem *cd_chanid; |
| unsigned char *tchanid, ctemp; |
| #ifndef PCMCIA |
| unsigned char t_irq=0; |
| unsigned long timeout; |
| static int version_printed; |
| #endif |
| |
| /* Query the adapter PIO base port which will return |
| * indication of where MMIO was placed. We also have a |
| * coded interrupt number. |
| */ |
| segment = inb(PIOaddr); |
| if (segment < 0x40 || segment > 0xe0) { |
| /* Out of range values so we'll assume non-existent IO device |
| * but this is not necessarily a problem, esp if a turbo |
| * adapter is being used. */ |
| #if IBMTR_DEBUG_MESSAGES |
| DPRINTK("ibmtr_probe1(): unhappy that inb(0x%X) == 0x%X, " |
| "Hardware Problem?\n",PIOaddr,segment); |
| #endif |
| return -ENODEV; |
| } |
| /* |
| * Compute the linear base address of the MMIO area |
| * as LINUX doesn't care about segments |
| */ |
| t_mmio = ioremap(((__u32) (segment & 0xfc) << 11) + 0x80000,2048); |
| if (!t_mmio) { |
| DPRINTK("Cannot remap mmiobase memory area") ; |
| return -ENODEV ; |
| } |
| intr = segment & 0x03; /* low bits is coded interrupt # */ |
| if (ibmtr_debug_trace & TRC_INIT) |
| DPRINTK("PIOaddr: %4hx seg/intr: %2x mmio base: %p intr: %d\n" |
| , PIOaddr, (int) segment, t_mmio, (int) intr); |
| |
| /* |
| * Now we will compare expected 'channelid' strings with |
| * what we is there to learn of ISA/MCA or not TR card |
| */ |
| #ifdef PCMCIA |
| iounmap(t_mmio); |
| t_mmio = ti->mmio; /*BMS to get virtual address */ |
| irq = ti->irq; /*BMS to display the irq! */ |
| #endif |
| cd_chanid = (CHANNEL_ID + t_mmio); /* for efficiency */ |
| tchanid = pcchannelid; |
| cardpresent = TR_ISA; /* try ISA */ |
| |
| /* Suboptimize knowing first byte different */ |
| ctemp = readb(cd_chanid) & 0x0f; |
| if (ctemp != *tchanid) { /* NOT ISA card, try MCA */ |
| tchanid = mcchannelid; |
| cardpresent = TR_MCA; |
| if (ctemp != *tchanid) /* Neither ISA nor MCA */ |
| cardpresent = NOTOK; |
| } |
| if (cardpresent != NOTOK) { |
| /* Know presumed type, try rest of ID */ |
| for (i = 2, j = 1; i <= 46; i = i + 2, j++) { |
| if( (readb(cd_chanid+i)&0x0f) == tchanid[j]) continue; |
| /* match failed, not TR card */ |
| cardpresent = NOTOK; |
| break; |
| } |
| } |
| /* |
| * If we have an ISA board check for the ISA P&P version, |
| * as it has different IRQ settings |
| */ |
| if (cardpresent == TR_ISA && (readb(AIPFID + t_mmio) == 0x0e)) |
| cardpresent = TR_ISAPNP; |
| if (cardpresent == NOTOK) { /* "channel_id" did not match, report */ |
| if (!(ibmtr_debug_trace & TRC_INIT)) { |
| #ifndef PCMCIA |
| iounmap(t_mmio); |
| #endif |
| return -ENODEV; |
| } |
| DPRINTK( "Channel ID string not found for PIOaddr: %4hx\n", |
| PIOaddr); |
| DPRINTK("Expected for ISA: "); |
| PrtChanID(pcchannelid, 1); |
| DPRINTK(" found: "); |
| /* BMS Note that this can be misleading, when hardware is flaky, because you |
| are reading it a second time here. So with my flaky hardware, I'll see my- |
| self in this block, with the HW ID matching the ISA ID exactly! */ |
| HWPrtChanID(cd_chanid, 2); |
| DPRINTK("Expected for MCA: "); |
| PrtChanID(mcchannelid, 1); |
| } |
| /* Now, setup some of the pl0 buffers for this driver.. */ |
| /* If called from PCMCIA, it is already set up, so no need to |
| waste the memory, just use the existing structure */ |
| #ifndef PCMCIA |
| ti->mmio = t_mmio; |
| for (i = 0; i < IBMTR_MAX_ADAPTERS; i++) { |
| if (turbo_io[i] != PIOaddr) |
| continue; |
| #if IBMTR_DEBUG_MESSAGES |
| printk("ibmtr::tr_probe1, setting PIOaddr %x to Turbo\n", |
| PIOaddr); |
| #endif |
| ti->turbo = 1; |
| t_irq = turbo_irq[i]; |
| } |
| #endif /* !PCMCIA */ |
| ti->readlog_pending = 0; |
| init_waitqueue_head(&ti->wait_for_reset); |
| |
| /* if PCMCIA, the card can be recognized as either TR_ISA or TR_ISAPNP |
| * depending which card is inserted. */ |
| |
| #ifndef PCMCIA |
| switch (cardpresent) { |
| case TR_ISA: |
| if (intr == 0) irq = 9; /* irq2 really is irq9 */ |
| if (intr == 1) irq = 3; |
| if (intr == 2) irq = 6; |
| if (intr == 3) irq = 7; |
| ti->adapter_int_enable = PIOaddr + ADAPTINTREL; |
| break; |
| case TR_MCA: |
| if (intr == 0) irq = 9; |
| if (intr == 1) irq = 3; |
| if (intr == 2) irq = 10; |
| if (intr == 3) irq = 11; |
| ti->global_int_enable = 0; |
| ti->adapter_int_enable = 0; |
| ti->sram_phys=(__u32)(inb(PIOaddr+ADAPTRESETREL) & 0xfe) << 12; |
| break; |
| case TR_ISAPNP: |
| if (!t_irq) { |
| if (intr == 0) irq = 9; |
| if (intr == 1) irq = 3; |
| if (intr == 2) irq = 10; |
| if (intr == 3) irq = 11; |
| } else |
| irq=t_irq; |
| timeout = jiffies + TR_SPIN_INTERVAL; |
| while (!readb(ti->mmio + ACA_OFFSET + ACA_RW + RRR_EVEN)){ |
| if (!time_after(jiffies, timeout)) continue; |
| DPRINTK( "Hardware timeout during initialization.\n"); |
| iounmap(t_mmio); |
| return -ENODEV; |
| } |
| ti->sram_phys = |
| ((__u32)readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_EVEN)<<12); |
| ti->adapter_int_enable = PIOaddr + ADAPTINTREL; |
| break; |
| } /*end switch (cardpresent) */ |
| #endif /*not PCMCIA */ |
| |
| if (ibmtr_debug_trace & TRC_INIT) { /* just report int */ |
| DPRINTK("irq=%d", irq); |
| printk(", sram_phys=0x%x", ti->sram_phys); |
| if(ibmtr_debug_trace&TRC_INITV){ /* full chat in verbose only */ |
| DPRINTK(", ti->mmio=%p", ti->mmio); |
| printk(", segment=%02X", segment); |
| } |
| printk(".\n"); |
| } |
| |
| /* Get hw address of token ring card */ |
| j = 0; |
| for (i = 0; i < 0x18; i = i + 2) { |
| /* technical reference states to do this */ |
| temp = readb(ti->mmio + AIP + i) & 0x0f; |
| ti->hw_address[j] = temp; |
| if (j & 1) |
| dev->dev_addr[(j / 2)] = |
| ti->hw_address[j]+ (ti->hw_address[j - 1] << 4); |
| ++j; |
| } |
| /* get Adapter type: 'F' = Adapter/A, 'E' = 16/4 Adapter II,... */ |
| ti->adapter_type = readb(ti->mmio + AIPADAPTYPE); |
| |
| /* get Data Rate: F=4Mb, E=16Mb, D=4Mb & 16Mb ?? */ |
| ti->data_rate = readb(ti->mmio + AIPDATARATE); |
| |
| /* Get Early Token Release support?: F=no, E=4Mb, D=16Mb, C=4&16Mb */ |
| ti->token_release = readb(ti->mmio + AIPEARLYTOKEN); |
| |
| /* How much shared RAM is on adapter ? */ |
| if (ti->turbo) { |
| ti->avail_shared_ram=127; |
| } else { |
| ti->avail_shared_ram = get_sram_size(ti);/*in 512 byte units */ |
| } |
| /* We need to set or do a bunch of work here based on previous results*/ |
| /* Support paging? What sizes?: F=no, E=16k, D=32k, C=16 & 32k */ |
| ti->shared_ram_paging = readb(ti->mmio + AIPSHRAMPAGE); |
| |
| /* Available DHB 4Mb size: F=2048, E=4096, D=4464 */ |
| switch (readb(ti->mmio + AIP4MBDHB)) { |
| case 0xe: ti->dhb_size4mb = 4096; break; |
| case 0xd: ti->dhb_size4mb = 4464; break; |
| default: ti->dhb_size4mb = 2048; break; |
| } |
| |
| /* Available DHB 16Mb size: F=2048, E=4096, D=8192, C=16384, B=17960 */ |
| switch (readb(ti->mmio + AIP16MBDHB)) { |
| case 0xe: ti->dhb_size16mb = 4096; break; |
| case 0xd: ti->dhb_size16mb = 8192; break; |
| case 0xc: ti->dhb_size16mb = 16384; break; |
| case 0xb: ti->dhb_size16mb = 17960; break; |
| default: ti->dhb_size16mb = 2048; break; |
| } |
| |
| /* We must figure out how much shared memory space this adapter |
| * will occupy so that if there are two adapters we can fit both |
| * in. Given a choice, we will limit this adapter to 32K. The |
| * maximum space will will use for two adapters is 64K so if the |
| * adapter we are working on demands 64K (it also doesn't support |
| * paging), then only one adapter can be supported. |
| */ |
| |
| /* |
| * determine how much of total RAM is mapped into PC space |
| */ |
| ti->mapped_ram_size= /*sixteen to onehundredtwentyeight 512byte blocks*/ |
| 1<< ((readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03) + 4); |
| ti->page_mask = 0; |
| if (ti->turbo) ti->page_mask=0xf0; |
| else if (ti->shared_ram_paging == 0xf); /* No paging in adapter */ |
| else { |
| #ifdef ENABLE_PAGING |
| unsigned char pg_size = 0; |
| /* BMS: page size: PCMCIA, use configuration register; |
| ISAPNP, use LANAIDC config tool from www.ibm.com */ |
| switch (ti->shared_ram_paging) { |
| case 0xf: |
| break; |
| case 0xe: |
| ti->page_mask = (ti->mapped_ram_size == 32) ? 0xc0 : 0; |
| pg_size = 32; /* 16KB page size */ |
| break; |
| case 0xd: |
| ti->page_mask = (ti->mapped_ram_size == 64) ? 0x80 : 0; |
| pg_size = 64; /* 32KB page size */ |
| break; |
| case 0xc: |
| switch (ti->mapped_ram_size) { |
| case 32: |
| ti->page_mask = 0xc0; |
| pg_size = 32; |
| break; |
| case 64: |
| ti->page_mask = 0x80; |
| pg_size = 64; |
| break; |
| } |
| break; |
| default: |
| DPRINTK("Unknown shared ram paging info %01X\n", |
| ti->shared_ram_paging); |
| iounmap(t_mmio); |
| return -ENODEV; |
| break; |
| } /*end switch shared_ram_paging */ |
| |
| if (ibmtr_debug_trace & TRC_INIT) |
| DPRINTK("Shared RAM paging code: %02X, " |
| "mapped RAM size: %dK, shared RAM size: %dK, " |
| "page mask: %02X\n:", |
| ti->shared_ram_paging, ti->mapped_ram_size / 2, |
| ti->avail_shared_ram / 2, ti->page_mask); |
| #endif /*ENABLE_PAGING */ |
| } |
| |
| #ifndef PCMCIA |
| /* finish figuring the shared RAM address */ |
| if (cardpresent == TR_ISA) { |
| static __u32 ram_bndry_mask[] = |
| { 0xffffe000, 0xffffc000, 0xffff8000, 0xffff0000 }; |
| __u32 new_base, rrr_32, chk_base, rbm; |
| |
| rrr_32=readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03; |
| rbm = ram_bndry_mask[rrr_32]; |
| new_base = (ibmtr_mem_base + (~rbm)) & rbm;/* up to boundary */ |
| chk_base = new_base + (ti->mapped_ram_size << 9); |
| if (chk_base > (ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE)) { |
| DPRINTK("Shared RAM for this adapter (%05x) exceeds " |
| "driver limit (%05x), adapter not started.\n", |
| chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE); |
| iounmap(t_mmio); |
| return -ENODEV; |
| } else { /* seems cool, record what we have figured out */ |
| ti->sram_base = new_base >> 12; |
| ibmtr_mem_base = chk_base; |
| } |
| } |
| else ti->sram_base = ti->sram_phys >> 12; |
| |
| /* The PCMCIA has already got the interrupt line and the io port, |
| so no chance of anybody else getting it - MLP */ |
| if (request_irq(dev->irq = irq, &tok_interrupt, 0, "ibmtr", dev) != 0) { |
| DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n", |
| irq); |
| iounmap(t_mmio); |
| return -ENODEV; |
| } |
| /*?? Now, allocate some of the PIO PORTs for this driver.. */ |
| /* record PIOaddr range as busy */ |
| if (!request_region(PIOaddr, IBMTR_IO_EXTENT, "ibmtr")) { |
| DPRINTK("Could not grab PIO range. Halting driver.\n"); |
| free_irq(dev->irq, dev); |
| iounmap(t_mmio); |
| return -EBUSY; |
| } |
| |
| if (!version_printed++) { |
| printk(version); |
| } |
| #endif /* !PCMCIA */ |
| DPRINTK("%s %s found\n", |
| channel_def[cardpresent - 1], adapter_def(ti->adapter_type)); |
| DPRINTK("using irq %d, PIOaddr %hx, %dK shared RAM.\n", |
| irq, PIOaddr, ti->mapped_ram_size / 2); |
| DPRINTK("Hardware address : %pM\n", dev->dev_addr); |
| if (ti->page_mask) |
| DPRINTK("Shared RAM paging enabled. " |
| "Page size: %uK Shared Ram size %dK\n", |
| ((ti->page_mask^0xff)+1) >>2, ti->avail_shared_ram / 2); |
| else |
| DPRINTK("Shared RAM paging disabled. ti->page_mask %x\n", |
| ti->page_mask); |
| |
| /* Calculate the maximum DHB we can use */ |
| /* two cases where avail_shared_ram doesn't equal mapped_ram_size: |
| 1. avail_shared_ram is 127 but mapped_ram_size is 128 (typical) |
| 2. user has configured adapter for less than avail_shared_ram |
| but is not using paging (she should use paging, I believe) |
| */ |
| if (!ti->page_mask) { |
| ti->avail_shared_ram= |
| min(ti->mapped_ram_size,ti->avail_shared_ram); |
| } |
| |
| switch (ti->avail_shared_ram) { |
| case 16: /* 8KB shared RAM */ |
| ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)2048); |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=2; |
| ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)2048); |
| ti->rbuf_len16 = 1032; |
| ti->rbuf_cnt16=2; |
| break; |
| case 32: /* 16KB shared RAM */ |
| ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=4; |
| ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)4096); |
| ti->rbuf_len16 = 1032; /*1024 usable */ |
| ti->rbuf_cnt16=4; |
| break; |
| case 64: /* 32KB shared RAM */ |
| ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=6; |
| ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)10240); |
| ti->rbuf_len16 = 1032; |
| ti->rbuf_cnt16=6; |
| break; |
| case 127: /* 63.5KB shared RAM */ |
| ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=6; |
| ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)16384); |
| ti->rbuf_len16 = 1032; |
| ti->rbuf_cnt16=16; |
| break; |
| case 128: /* 64KB shared RAM */ |
| ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=6; |
| ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)17960); |
| ti->rbuf_len16 = 1032; |
| ti->rbuf_cnt16=16; |
| break; |
| default: |
| ti->dhb_size4mb = 2048; |
| ti->rbuf_len4 = 1032; |
| ti->rbuf_cnt4=2; |
| ti->dhb_size16mb = 2048; |
| ti->rbuf_len16 = 1032; |
| ti->rbuf_cnt16=2; |
| break; |
| } |
| /* this formula is not smart enough for the paging case |
| ti->rbuf_cnt<x> = (ti->avail_shared_ram * BLOCKSZ - ADAPT_PRIVATE - |
| ARBLENGTH - SSBLENGTH - DLC_MAX_SAP * SAPLENGTH - |
| DLC_MAX_STA * STALENGTH - ti->dhb_size<x>mb * NUM_DHB - |
| SRBLENGTH - ASBLENGTH) / ti->rbuf_len<x>; |
| */ |
| ti->maxmtu16 = (ti->rbuf_len16 - 8) * ti->rbuf_cnt16 - TR_HLEN; |
| ti->maxmtu4 = (ti->rbuf_len4 - 8) * ti->rbuf_cnt4 - TR_HLEN; |
| /*BMS assuming 18 bytes of Routing Information (usually works) */ |
| DPRINTK("Maximum Receive Internet Protocol MTU 16Mbps: %d, 4Mbps: %d\n", |
| ti->maxmtu16, ti->maxmtu4); |
| |
| dev->base_addr = PIOaddr; /* set the value for device */ |
| dev->mem_start = ti->sram_base << 12; |
| dev->mem_end = dev->mem_start + (ti->mapped_ram_size << 9) - 1; |
| trdev_init(dev); |
| return 0; /* Return 0 to indicate we have found a Token Ring card. */ |
| } /*ibmtr_probe1() */ |
| |
| /*****************************************************************************/ |
| |
| /* query the adapter for the size of shared RAM */ |
| /* the function returns the RAM size in units of 512 bytes */ |
| |
| static unsigned char __devinit get_sram_size(struct tok_info *adapt_info) |
| { |
| unsigned char avail_sram_code; |
| static unsigned char size_code[] = { 0, 16, 32, 64, 127, 128 }; |
| /* Adapter gives |
| 'F' -- use RRR bits 3,2 |
| 'E' -- 8kb 'D' -- 16kb |
| 'C' -- 32kb 'A' -- 64KB |
| 'B' - 64KB less 512 bytes at top |
| (WARNING ... must zero top bytes in INIT */ |
| |
| avail_sram_code = 0xf - readb(adapt_info->mmio + AIPAVAILSHRAM); |
| if (avail_sram_code) return size_code[avail_sram_code]; |
| else /* for code 'F', must compute size from RRR(3,2) bits */ |
| return 1 << |
| ((readb(adapt_info->mmio+ACA_OFFSET+ACA_RW+RRR_ODD)>>2&3)+4); |
| } |
| |
| /*****************************************************************************/ |
| |
| static const struct net_device_ops trdev_netdev_ops = { |
| .ndo_open = tok_open, |
| .ndo_stop = tok_close, |
| .ndo_start_xmit = tok_send_packet, |
| .ndo_set_multicast_list = tok_set_multicast_list, |
| .ndo_change_mtu = ibmtr_change_mtu, |
| }; |
| |
| static int __devinit trdev_init(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| |
| SET_PAGE(ti->srb_page); |
| ti->open_failure = NO ; |
| dev->netdev_ops = &trdev_netdev_ops; |
| |
| return 0; |
| } |
| |
| /*****************************************************************************/ |
| |
| static int tok_init_card(struct net_device *dev) |
| { |
| struct tok_info *ti; |
| short PIOaddr; |
| unsigned long i; |
| |
| PIOaddr = dev->base_addr; |
| ti = netdev_priv(dev); |
| /* Special processing for first interrupt after reset */ |
| ti->do_tok_int = FIRST_INT; |
| /* Reset adapter */ |
| writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); |
| outb(0, PIOaddr + ADAPTRESET); |
| |
| schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ |
| |
| outb(0, PIOaddr + ADAPTRESETREL); |
| #ifdef ENABLE_PAGING |
| if (ti->page_mask) |
| writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN); |
| #endif |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ); |
| return i? 0 : -EAGAIN; |
| } |
| |
| /*****************************************************************************/ |
| static int tok_open(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| int i; |
| |
| /*the case we were left in a failure state during a previous open */ |
| if (ti->open_failure == YES) { |
| DPRINTK("Last time you were disconnected, how about now?\n"); |
| printk("You can't insert with an ICS connector half-cocked.\n"); |
| } |
| |
| ti->open_status = CLOSED; /* CLOSED or OPEN */ |
| ti->sap_status = CLOSED; /* CLOSED or OPEN */ |
| ti->open_failure = NO; /* NO or YES */ |
| ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ |
| |
| ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ |
| /* init the spinlock */ |
| spin_lock_init(&ti->lock); |
| init_timer(&ti->tr_timer); |
| |
| i = tok_init_card(dev); |
| if (i) return i; |
| |
| while (1){ |
| tok_open_adapter((unsigned long) dev); |
| i= interruptible_sleep_on_timeout(&ti->wait_for_reset, 25 * HZ); |
| /* sig catch: estimate opening adapter takes more than .5 sec*/ |
| if (i>(245*HZ)/10) break; /* fancier than if (i==25*HZ) */ |
| if (i==0) break; |
| if (ti->open_status == OPEN && ti->sap_status==OPEN) { |
| netif_start_queue(dev); |
| DPRINTK("Adapter is up and running\n"); |
| return 0; |
| } |
| i=schedule_timeout_interruptible(TR_RETRY_INTERVAL); |
| /* wait 30 seconds */ |
| if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */ |
| } |
| outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/ |
| DPRINTK("TERMINATED via signal\n"); /*BMS useful */ |
| return -EAGAIN; |
| } |
| |
| /*****************************************************************************/ |
| |
| #define COMMAND_OFST 0 |
| #define OPEN_OPTIONS_OFST 8 |
| #define NUM_RCV_BUF_OFST 24 |
| #define RCV_BUF_LEN_OFST 26 |
| #define DHB_LENGTH_OFST 28 |
| #define NUM_DHB_OFST 30 |
| #define DLC_MAX_SAP_OFST 32 |
| #define DLC_MAX_STA_OFST 33 |
| |
| static void tok_open_adapter(unsigned long dev_addr) |
| { |
| struct net_device *dev = (struct net_device *) dev_addr; |
| struct tok_info *ti; |
| int i; |
| |
| ti = netdev_priv(dev); |
| SET_PAGE(ti->init_srb_page); |
| writeb(~SRB_RESP_INT, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_ODD); |
| for (i = 0; i < sizeof(struct dir_open_adapter); i++) |
| writeb(0, ti->init_srb + i); |
| writeb(DIR_OPEN_ADAPTER, ti->init_srb + COMMAND_OFST); |
| writew(htons(OPEN_PASS_BCON_MAC), ti->init_srb + OPEN_OPTIONS_OFST); |
| if (ti->ring_speed == 16) { |
| writew(htons(ti->dhb_size16mb), ti->init_srb + DHB_LENGTH_OFST); |
| writew(htons(ti->rbuf_cnt16), ti->init_srb + NUM_RCV_BUF_OFST); |
| writew(htons(ti->rbuf_len16), ti->init_srb + RCV_BUF_LEN_OFST); |
| } else { |
| writew(htons(ti->dhb_size4mb), ti->init_srb + DHB_LENGTH_OFST); |
| writew(htons(ti->rbuf_cnt4), ti->init_srb + NUM_RCV_BUF_OFST); |
| writew(htons(ti->rbuf_len4), ti->init_srb + RCV_BUF_LEN_OFST); |
| } |
| writeb(NUM_DHB, /* always 2 */ ti->init_srb + NUM_DHB_OFST); |
| writeb(DLC_MAX_SAP, ti->init_srb + DLC_MAX_SAP_OFST); |
| writeb(DLC_MAX_STA, ti->init_srb + DLC_MAX_STA_OFST); |
| ti->srb = ti->init_srb; /* We use this one in the interrupt handler */ |
| ti->srb_page = ti->init_srb_page; |
| DPRINTK("Opening adapter: Xmit bfrs: %d X %d, Rcv bfrs: %d X %d\n", |
| readb(ti->init_srb + NUM_DHB_OFST), |
| ntohs(readw(ti->init_srb + DHB_LENGTH_OFST)), |
| ntohs(readw(ti->init_srb + NUM_RCV_BUF_OFST)), |
| ntohs(readw(ti->init_srb + RCV_BUF_LEN_OFST))); |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| } |
| |
| /*****************************************************************************/ |
| |
| static void open_sap(unsigned char type, struct net_device *dev) |
| { |
| int i; |
| struct tok_info *ti = netdev_priv(dev); |
| |
| SET_PAGE(ti->srb_page); |
| for (i = 0; i < sizeof(struct dlc_open_sap); i++) |
| writeb(0, ti->srb + i); |
| |
| #define MAX_I_FIELD_OFST 14 |
| #define SAP_VALUE_OFST 16 |
| #define SAP_OPTIONS_OFST 17 |
| #define STATION_COUNT_OFST 18 |
| |
| writeb(DLC_OPEN_SAP, ti->srb + COMMAND_OFST); |
| writew(htons(MAX_I_FIELD), ti->srb + MAX_I_FIELD_OFST); |
| writeb(SAP_OPEN_IND_SAP | SAP_OPEN_PRIORITY, ti->srb+ SAP_OPTIONS_OFST); |
| writeb(SAP_OPEN_STATION_CNT, ti->srb + STATION_COUNT_OFST); |
| writeb(type, ti->srb + SAP_VALUE_OFST); |
| writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| } |
| |
| |
| /*****************************************************************************/ |
| |
| static void tok_set_multicast_list(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| struct dev_mc_list *mclist; |
| unsigned char address[4]; |
| |
| int i; |
| |
| /*BMS the next line is CRUCIAL or you may be sad when you */ |
| /*BMS ifconfig tr down or hot unplug a PCMCIA card ??hownowbrowncow*/ |
| if (/*BMSHELPdev->start == 0 ||*/ ti->open_status != OPEN) return; |
| address[0] = address[1] = address[2] = address[3] = 0; |
| mclist = dev->mc_list; |
| for (i = 0; i < dev->mc_count; i++) { |
| address[0] |= mclist->dmi_addr[2]; |
| address[1] |= mclist->dmi_addr[3]; |
| address[2] |= mclist->dmi_addr[4]; |
| address[3] |= mclist->dmi_addr[5]; |
| mclist = mclist->next; |
| } |
| SET_PAGE(ti->srb_page); |
| for (i = 0; i < sizeof(struct srb_set_funct_addr); i++) |
| writeb(0, ti->srb + i); |
| |
| #define FUNCT_ADDRESS_OFST 6 |
| |
| writeb(DIR_SET_FUNC_ADDR, ti->srb + COMMAND_OFST); |
| for (i = 0; i < 4; i++) |
| writeb(address[i], ti->srb + FUNCT_ADDRESS_OFST + i); |
| writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| #if TR_VERBOSE |
| DPRINTK("Setting functional address: "); |
| for (i=0;i<4;i++) printk("%02X ", address[i]); |
| printk("\n"); |
| #endif |
| } |
| |
| /*****************************************************************************/ |
| |
| #define STATION_ID_OFST 4 |
| |
| static int tok_send_packet(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct tok_info *ti; |
| unsigned long flags; |
| ti = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| |
| /* lock against other CPUs */ |
| spin_lock_irqsave(&(ti->lock), flags); |
| |
| /* Save skb; we'll need it when the adapter asks for the data */ |
| ti->current_skb = skb; |
| SET_PAGE(ti->srb_page); |
| writeb(XMIT_UI_FRAME, ti->srb + COMMAND_OFST); |
| writew(ti->exsap_station_id, ti->srb + STATION_ID_OFST); |
| writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| spin_unlock_irqrestore(&(ti->lock), flags); |
| dev->trans_start = jiffies; |
| return NETDEV_TX_OK; |
| } |
| |
| /*****************************************************************************/ |
| |
| static int tok_close(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| |
| /* Important for PCMCIA hot unplug, otherwise, we'll pull the card, */ |
| /* unloading the module from memory, and then if a timer pops, ouch */ |
| del_timer_sync(&ti->tr_timer); |
| outb(0, dev->base_addr + ADAPTRESET); |
| ti->sram_phys |= 1; |
| ti->open_status = CLOSED; |
| |
| netif_stop_queue(dev); |
| DPRINTK("Adapter is closed.\n"); |
| return 0; |
| } |
| |
| /*****************************************************************************/ |
| |
| #define RETCODE_OFST 2 |
| #define OPEN_ERROR_CODE_OFST 6 |
| #define ASB_ADDRESS_OFST 8 |
| #define SRB_ADDRESS_OFST 10 |
| #define ARB_ADDRESS_OFST 12 |
| #define SSB_ADDRESS_OFST 14 |
| |
| static char *printphase[]= {"Lobe media test","Physical insertion", |
| "Address verification","Roll call poll","Request Parameters"}; |
| static char *printerror[]={"Function failure","Signal loss","Reserved", |
| "Frequency error","Timeout","Ring failure","Ring beaconing", |
| "Duplicate node address", |
| "Parameter request-retry count exceeded","Remove received", |
| "IMPL force received","Duplicate modifier", |
| "No monitor detected","Monitor contention failed for RPL"}; |
| |
| static void __iomem *map_address(struct tok_info *ti, unsigned index, __u8 *page) |
| { |
| if (ti->page_mask) { |
| *page = (index >> 8) & ti->page_mask; |
| index &= ~(ti->page_mask << 8); |
| } |
| return ti->sram_virt + index; |
| } |
| |
| static void dir_open_adapter (struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| unsigned char ret_code; |
| __u16 err; |
| |
| ti->srb = map_address(ti, |
| ntohs(readw(ti->init_srb + SRB_ADDRESS_OFST)), |
| &ti->srb_page); |
| ti->ssb = map_address(ti, |
| ntohs(readw(ti->init_srb + SSB_ADDRESS_OFST)), |
| &ti->ssb_page); |
| ti->arb = map_address(ti, |
| ntohs(readw(ti->init_srb + ARB_ADDRESS_OFST)), |
| &ti->arb_page); |
| ti->asb = map_address(ti, |
| ntohs(readw(ti->init_srb + ASB_ADDRESS_OFST)), |
| &ti->asb_page); |
| ti->current_skb = NULL; |
| ret_code = readb(ti->init_srb + RETCODE_OFST); |
| err = ntohs(readw(ti->init_srb + OPEN_ERROR_CODE_OFST)); |
| if (!ret_code) { |
| ti->open_status = OPEN; /* TR adapter is now available */ |
| if (ti->open_mode == AUTOMATIC) { |
| DPRINTK("Adapter reopened.\n"); |
| } |
| writeb(~SRB_RESP_INT, ti->mmio+ACA_OFFSET+ACA_RESET+ISRP_ODD); |
| open_sap(EXTENDED_SAP, dev); |
| return; |
| } |
| ti->open_failure = YES; |
| if (ret_code == 7){ |
| if (err == 0x24) { |
| if (!ti->auto_speedsave) { |
| DPRINTK("Open failed: Adapter speed must match " |
| "ring speed if Automatic Ring Speed Save is " |
| "disabled.\n"); |
| ti->open_action = FAIL; |
| }else |
| DPRINTK("Retrying open to adjust to " |
| "ring speed, "); |
| } else if (err == 0x2d) { |
| DPRINTK("Physical Insertion: No Monitor Detected, "); |
| printk("retrying after %ds delay...\n", |
| TR_RETRY_INTERVAL/HZ); |
| } else if (err == 0x11) { |
| DPRINTK("Lobe Media Function Failure (0x11), "); |
| printk(" retrying after %ds delay...\n", |
| TR_RETRY_INTERVAL/HZ); |
| } else { |
| char **prphase = printphase; |
| char **prerror = printerror; |
| DPRINTK("TR Adapter misc open failure, error code = "); |
| printk("0x%x, Phase: %s, Error: %s\n", |
| err, prphase[err/16 -1], prerror[err%16 -1]); |
| printk(" retrying after %ds delay...\n", |
| TR_RETRY_INTERVAL/HZ); |
| } |
| } else DPRINTK("open failed: ret_code = %02X..., ", ret_code); |
| if (ti->open_action != FAIL) { |
| if (ti->open_mode==AUTOMATIC){ |
| ti->open_action = REOPEN; |
| ibmtr_reset_timer(&(ti->tr_timer), dev); |
| return; |
| } |
| wake_up(&ti->wait_for_reset); |
| return; |
| } |
| DPRINTK("FAILURE, CAPUT\n"); |
| } |
| |
| /******************************************************************************/ |
| |
| static irqreturn_t tok_interrupt(int irq, void *dev_id) |
| { |
| unsigned char status; |
| /* unsigned char status_even ; */ |
| struct tok_info *ti; |
| struct net_device *dev; |
| #ifdef ENABLE_PAGING |
| unsigned char save_srpr; |
| #endif |
| |
| dev = dev_id; |
| #if TR_VERBOSE |
| DPRINTK("Int from tok_driver, dev : %p irq%d\n", dev,irq); |
| #endif |
| ti = netdev_priv(dev); |
| if (ti->sram_phys & 1) |
| return IRQ_NONE; /* PCMCIA card extraction flag */ |
| spin_lock(&(ti->lock)); |
| #ifdef ENABLE_PAGING |
| save_srpr = readb(ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); |
| #endif |
| |
| /* Disable interrupts till processing is finished */ |
| writeb((~INT_ENABLE), ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); |
| |
| /* Reset interrupt for ISA boards */ |
| if (ti->adapter_int_enable) |
| outb(0, ti->adapter_int_enable); |
| else /* used for PCMCIA cards */ |
| outb(0, ti->global_int_enable); |
| if (ti->do_tok_int == FIRST_INT){ |
| initial_tok_int(dev); |
| #ifdef ENABLE_PAGING |
| writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); |
| #endif |
| spin_unlock(&(ti->lock)); |
| return IRQ_HANDLED; |
| } |
| /* Begin interrupt handler HERE inline to avoid the extra |
| levels of logic and call depth for the original solution. */ |
| status = readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRP_ODD); |
| /*BMSstatus_even = readb (ti->mmio + ACA_OFFSET + ACA_RW + ISRP_EVEN) */ |
| /*BMSdebugprintk("tok_interrupt: ISRP_ODD = 0x%x ISRP_EVEN = 0x%x\n", */ |
| /*BMS status,status_even); */ |
| |
| if (status & ADAP_CHK_INT) { |
| int i; |
| void __iomem *check_reason; |
| __u8 check_reason_page = 0; |
| check_reason = map_address(ti, |
| ntohs(readw(ti->mmio+ ACA_OFFSET+ACA_RW + WWCR_EVEN)), |
| &check_reason_page); |
| SET_PAGE(check_reason_page); |
| |
| DPRINTK("Adapter check interrupt\n"); |
| DPRINTK("8 reason bytes follow: "); |
| for (i = 0; i < 8; i++, check_reason++) |
| printk("%02X ", (int) readb(check_reason)); |
| printk("\n"); |
| writeb(~ADAP_CHK_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); |
| status = readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRA_EVEN); |
| DPRINTK("ISRA_EVEN == 0x02%x\n",status); |
| ti->open_status = CLOSED; |
| ti->sap_status = CLOSED; |
| ti->open_mode = AUTOMATIC; |
| netif_carrier_off(dev); |
| netif_stop_queue(dev); |
| ti->open_action = RESTART; |
| outb(0, dev->base_addr + ADAPTRESET); |
| ibmtr_reset_timer(&(ti->tr_timer), dev);/*BMS try to reopen*/ |
| spin_unlock(&(ti->lock)); |
| return IRQ_HANDLED; |
| } |
| if (readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRP_EVEN) |
| & (TCR_INT | ERR_INT | ACCESS_INT)) { |
| DPRINTK("adapter error: ISRP_EVEN : %02x\n", |
| (int)readb(ti->mmio+ ACA_OFFSET + ACA_RW + ISRP_EVEN)); |
| writeb(~(TCR_INT | ERR_INT | ACCESS_INT), |
| ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); |
| status= readb(ti->mmio+ ACA_OFFSET + ACA_RW + ISRA_EVEN);/*BMS*/ |
| DPRINTK("ISRA_EVEN == 0x02%x\n",status);/*BMS*/ |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| #ifdef ENABLE_PAGING |
| writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); |
| #endif |
| spin_unlock(&(ti->lock)); |
| return IRQ_HANDLED; |
| } |
| if (status & SRB_RESP_INT) { /* SRB response */ |
| SET_PAGE(ti->srb_page); |
| #if TR_VERBOSE |
| DPRINTK("SRB resp: cmd=%02X rsp=%02X\n", |
| readb(ti->srb), readb(ti->srb + RETCODE_OFST)); |
| #endif |
| switch (readb(ti->srb)) { /* SRB command check */ |
| case XMIT_DIR_FRAME:{ |
| unsigned char xmit_ret_code; |
| xmit_ret_code = readb(ti->srb + RETCODE_OFST); |
| if (xmit_ret_code == 0xff) break; |
| DPRINTK("error on xmit_dir_frame request: %02X\n", |
| xmit_ret_code); |
| if (ti->current_skb) { |
| dev_kfree_skb_irq(ti->current_skb); |
| ti->current_skb = NULL; |
| } |
| /*dev->tbusy = 0;*/ |
| netif_wake_queue(dev); |
| if (ti->readlog_pending) |
| ibmtr_readlog(dev); |
| break; |
| } |
| case XMIT_UI_FRAME:{ |
| unsigned char xmit_ret_code; |
| |
| xmit_ret_code = readb(ti->srb + RETCODE_OFST); |
| if (xmit_ret_code == 0xff) break; |
| DPRINTK("error on xmit_ui_frame request: %02X\n", |
| xmit_ret_code); |
| if (ti->current_skb) { |
| dev_kfree_skb_irq(ti->current_skb); |
| ti->current_skb = NULL; |
| } |
| netif_wake_queue(dev); |
| if (ti->readlog_pending) |
| ibmtr_readlog(dev); |
| break; |
| } |
| case DIR_OPEN_ADAPTER: |
| dir_open_adapter(dev); |
| break; |
| case DLC_OPEN_SAP: |
| if (readb(ti->srb + RETCODE_OFST)) { |
| DPRINTK("open_sap failed: ret_code = %02X, " |
| "retrying\n", |
| (int) readb(ti->srb + RETCODE_OFST)); |
| ti->open_action = REOPEN; |
| ibmtr_reset_timer(&(ti->tr_timer), dev); |
| break; |
| } |
| ti->exsap_station_id = readw(ti->srb + STATION_ID_OFST); |
| ti->sap_status = OPEN;/* TR adapter is now available */ |
| if (ti->open_mode==MANUAL){ |
| wake_up(&ti->wait_for_reset); |
| break; |
| } |
| netif_wake_queue(dev); |
| netif_carrier_on(dev); |
| break; |
| case DIR_INTERRUPT: |
| case DIR_MOD_OPEN_PARAMS: |
| case DIR_SET_GRP_ADDR: |
| case DIR_SET_FUNC_ADDR: |
| case DLC_CLOSE_SAP: |
| if (readb(ti->srb + RETCODE_OFST)) |
| DPRINTK("error on %02X: %02X\n", |
| (int) readb(ti->srb + COMMAND_OFST), |
| (int) readb(ti->srb + RETCODE_OFST)); |
| break; |
| case DIR_READ_LOG: |
| if (readb(ti->srb + RETCODE_OFST)){ |
| DPRINTK("error on dir_read_log: %02X\n", |
| (int) readb(ti->srb + RETCODE_OFST)); |
| netif_wake_queue(dev); |
| break; |
| } |
| #if IBMTR_DEBUG_MESSAGES |
| |
| #define LINE_ERRORS_OFST 0 |
| #define INTERNAL_ERRORS_OFST 1 |
| #define BURST_ERRORS_OFST 2 |
| #define AC_ERRORS_OFST 3 |
| #define ABORT_DELIMITERS_OFST 4 |
| #define LOST_FRAMES_OFST 6 |
| #define RECV_CONGEST_COUNT_OFST 7 |
| #define FRAME_COPIED_ERRORS_OFST 8 |
| #define FREQUENCY_ERRORS_OFST 9 |
| #define TOKEN_ERRORS_OFST 10 |
| |
| DPRINTK("Line errors %02X, Internal errors %02X, " |
| "Burst errors %02X\n" "A/C errors %02X, " |
| "Abort delimiters %02X, Lost frames %02X\n" |
| "Receive congestion count %02X, " |
| "Frame copied errors %02X\nFrequency errors %02X, " |
| "Token errors %02X\n", |
| (int) readb(ti->srb + LINE_ERRORS_OFST), |
| (int) readb(ti->srb + INTERNAL_ERRORS_OFST), |
| (int) readb(ti->srb + BURST_ERRORS_OFST), |
| (int) readb(ti->srb + AC_ERRORS_OFST), |
| (int) readb(ti->srb + ABORT_DELIMITERS_OFST), |
| (int) readb(ti->srb + LOST_FRAMES_OFST), |
| (int) readb(ti->srb + RECV_CONGEST_COUNT_OFST), |
| (int) readb(ti->srb + FRAME_COPIED_ERRORS_OFST), |
| (int) readb(ti->srb + FREQUENCY_ERRORS_OFST), |
| (int) readb(ti->srb + TOKEN_ERRORS_OFST)); |
| #endif |
| netif_wake_queue(dev); |
| break; |
| default: |
| DPRINTK("Unknown command %02X encountered\n", |
| (int) readb(ti->srb)); |
| } /* end switch SRB command check */ |
| writeb(~SRB_RESP_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); |
| } /* if SRB response */ |
| if (status & ASB_FREE_INT) { /* ASB response */ |
| SET_PAGE(ti->asb_page); |
| #if TR_VERBOSE |
| DPRINTK("ASB resp: cmd=%02X\n", readb(ti->asb)); |
| #endif |
| |
| switch (readb(ti->asb)) { /* ASB command check */ |
| case REC_DATA: |
| case XMIT_UI_FRAME: |
| case XMIT_DIR_FRAME: |
| break; |
| default: |
| DPRINTK("unknown command in asb %02X\n", |
| (int) readb(ti->asb)); |
| } /* switch ASB command check */ |
| if (readb(ti->asb + 2) != 0xff) /* checks ret_code */ |
| DPRINTK("ASB error %02X in cmd %02X\n", |
| (int) readb(ti->asb + 2), (int) readb(ti->asb)); |
| writeb(~ASB_FREE_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); |
| } /* if ASB response */ |
| |
| #define STATUS_OFST 6 |
| #define NETW_STATUS_OFST 6 |
| |
| if (status & ARB_CMD_INT) { /* ARB response */ |
| SET_PAGE(ti->arb_page); |
| #if TR_VERBOSE |
| DPRINTK("ARB resp: cmd=%02X\n", readb(ti->arb)); |
| #endif |
| |
| switch (readb(ti->arb)) { /* ARB command check */ |
| case DLC_STATUS: |
| DPRINTK("DLC_STATUS new status: %02X on station %02X\n", |
| ntohs(readw(ti->arb + STATUS_OFST)), |
| ntohs(readw(ti->arb+ STATION_ID_OFST))); |
| break; |
| case REC_DATA: |
| tr_rx(dev); |
| break; |
| case RING_STAT_CHANGE:{ |
| unsigned short ring_status; |
| ring_status= ntohs(readw(ti->arb + NETW_STATUS_OFST)); |
| if (ibmtr_debug_trace & TRC_INIT) |
| DPRINTK("Ring Status Change...(0x%x)\n", |
| ring_status); |
| if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){ |
| netif_stop_queue(dev); |
| netif_carrier_off(dev); |
| DPRINTK("Remove received, or Auto-removal error" |
| ", or Lobe fault\n"); |
| DPRINTK("We'll try to reopen the closed adapter" |
| " after a %d second delay.\n", |
| TR_RETRY_INTERVAL/HZ); |
| /*I was confused: I saw the TR reopening but */ |
| /*forgot:with an RJ45 in an RJ45/ICS adapter */ |
| /*but adapter not in the ring, the TR will */ |
| /* open, and then soon close and come here. */ |
| ti->open_mode = AUTOMATIC; |
| ti->open_status = CLOSED; /*12/2000 BMS*/ |
| ti->open_action = REOPEN; |
| ibmtr_reset_timer(&(ti->tr_timer), dev); |
| } else if (ring_status & LOG_OVERFLOW) { |
| if(netif_queue_stopped(dev)) |
| ti->readlog_pending = 1; |
| else |
| ibmtr_readlog(dev); |
| } |
| break; |
| } |
| case XMIT_DATA_REQ: |
| tr_tx(dev); |
| break; |
| default: |
| DPRINTK("Unknown command %02X in arb\n", |
| (int) readb(ti->arb)); |
| break; |
| } /* switch ARB command check */ |
| writeb(~ARB_CMD_INT, ti->mmio+ ACA_OFFSET+ACA_RESET + ISRP_ODD); |
| writeb(ARB_FREE, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| } /* if ARB response */ |
| if (status & SSB_RESP_INT) { /* SSB response */ |
| unsigned char retcode; |
| SET_PAGE(ti->ssb_page); |
| #if TR_VERBOSE |
| DPRINTK("SSB resp: cmd=%02X rsp=%02X\n", |
| readb(ti->ssb), readb(ti->ssb + 2)); |
| #endif |
| |
| switch (readb(ti->ssb)) { /* SSB command check */ |
| case XMIT_DIR_FRAME: |
| case XMIT_UI_FRAME: |
| retcode = readb(ti->ssb + 2); |
| if (retcode && (retcode != 0x22))/* checks ret_code */ |
| DPRINTK("xmit ret_code: %02X xmit error code: " |
| "%02X\n", |
| (int)retcode, (int)readb(ti->ssb + 6)); |
| else |
| dev->stats.tx_packets++; |
| break; |
| case XMIT_XID_CMD: |
| DPRINTK("xmit xid ret_code: %02X\n", |
| (int) readb(ti->ssb + 2)); |
| default: |
| DPRINTK("Unknown command %02X in ssb\n", |
| (int) readb(ti->ssb)); |
| } /* SSB command check */ |
| writeb(~SSB_RESP_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); |
| writeb(SSB_FREE, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| } /* if SSB response */ |
| #ifdef ENABLE_PAGING |
| writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); |
| #endif |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| spin_unlock(&(ti->lock)); |
| return IRQ_HANDLED; |
| } /*tok_interrupt */ |
| |
| /*****************************************************************************/ |
| |
| #define INIT_STATUS_OFST 1 |
| #define INIT_STATUS_2_OFST 2 |
| #define ENCODED_ADDRESS_OFST 8 |
| |
| static void initial_tok_int(struct net_device *dev) |
| { |
| |
| __u32 encoded_addr, hw_encoded_addr; |
| struct tok_info *ti; |
| unsigned char init_status; /*BMS 12/2000*/ |
| |
| ti = netdev_priv(dev); |
| |
| ti->do_tok_int = NOT_FIRST; |
| |
| /* we assign the shared-ram address for ISA devices */ |
| writeb(ti->sram_base, ti->mmio + ACA_OFFSET + ACA_RW + RRR_EVEN); |
| #ifndef PCMCIA |
| ti->sram_virt = ioremap(((__u32)ti->sram_base << 12), ti->avail_shared_ram); |
| #endif |
| ti->init_srb = map_address(ti, |
| ntohs(readw(ti->mmio + ACA_OFFSET + WRBR_EVEN)), |
| &ti->init_srb_page); |
| if (ti->page_mask && ti->avail_shared_ram == 127) { |
| void __iomem *last_512; |
| __u8 last_512_page=0; |
| int i; |
| last_512 = map_address(ti, 0xfe00, &last_512_page); |
| /* initialize high section of ram (if necessary) */ |
| SET_PAGE(last_512_page); |
| for (i = 0; i < 512; i++) |
| writeb(0, last_512 + i); |
| } |
| SET_PAGE(ti->init_srb_page); |
| |
| #if TR_VERBOSE |
| { |
| int i; |
| |
| DPRINTK("ti->init_srb_page=0x%x\n", ti->init_srb_page); |
| DPRINTK("init_srb(%p):", ti->init_srb ); |
| for (i = 0; i < 20; i++) |
| printk("%02X ", (int) readb(ti->init_srb + i)); |
| printk("\n"); |
| } |
| #endif |
| |
| hw_encoded_addr = readw(ti->init_srb + ENCODED_ADDRESS_OFST); |
| encoded_addr = ntohs(hw_encoded_addr); |
| init_status= /*BMS 12/2000 check for shallow mode possibility (Turbo)*/ |
| readb(ti->init_srb+offsetof(struct srb_init_response,init_status)); |
| /*printk("Initial interrupt: init_status= 0x%02x\n",init_status);*/ |
| ti->ring_speed = init_status & 0x01 ? 16 : 4; |
| DPRINTK("Initial interrupt : %d Mbps, shared RAM base %08x.\n", |
| ti->ring_speed, (unsigned int)dev->mem_start); |
| ti->auto_speedsave = (readb(ti->init_srb+INIT_STATUS_2_OFST) & 4) != 0; |
| |
| if (ti->open_mode == MANUAL) wake_up(&ti->wait_for_reset); |
| else tok_open_adapter((unsigned long)dev); |
| |
| } /*initial_tok_int() */ |
| |
| /*****************************************************************************/ |
| |
| #define CMD_CORRELATE_OFST 1 |
| #define DHB_ADDRESS_OFST 6 |
| |
| #define FRAME_LENGTH_OFST 6 |
| #define HEADER_LENGTH_OFST 8 |
| #define RSAP_VALUE_OFST 9 |
| |
| static void tr_tx(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| struct trh_hdr *trhdr = (struct trh_hdr *) ti->current_skb->data; |
| unsigned int hdr_len; |
| __u32 dhb=0,dhb_base; |
| void __iomem *dhbuf = NULL; |
| unsigned char xmit_command; |
| int i,dhb_len=0x4000,src_len,src_offset; |
| struct trllc *llc; |
| struct srb_xmit xsrb; |
| __u8 dhb_page = 0; |
| __u8 llc_ssap; |
| |
| SET_PAGE(ti->asb_page); |
| |
| if (readb(ti->asb+RETCODE_OFST) != 0xFF) DPRINTK("ASB not free !!!\n"); |
| |
| /* in providing the transmit interrupts, is telling us it is ready for |
| data and providing a shared memory address for us to stuff with data. |
| Here we compute the effective address where we will place data. |
| */ |
| SET_PAGE(ti->arb_page); |
| dhb=dhb_base=ntohs(readw(ti->arb + DHB_ADDRESS_OFST)); |
| if (ti->page_mask) { |
| dhb_page = (dhb_base >> 8) & ti->page_mask; |
| dhb=dhb_base & ~(ti->page_mask << 8); |
| } |
| dhbuf = ti->sram_virt + dhb; |
| |
| /* Figure out the size of the 802.5 header */ |
| if (!(trhdr->saddr[0] & 0x80)) /* RIF present? */ |
| hdr_len = sizeof(struct trh_hdr) - TR_MAXRIFLEN; |
| else |
| hdr_len = ((ntohs(trhdr->rcf) & TR_RCF_LEN_MASK) >> 8) |
| + sizeof(struct trh_hdr) - TR_MAXRIFLEN; |
| |
| llc = (struct trllc *) (ti->current_skb->data + hdr_len); |
| |
| llc_ssap = llc->ssap; |
| SET_PAGE(ti->srb_page); |
| memcpy_fromio(&xsrb, ti->srb, sizeof(xsrb)); |
| SET_PAGE(ti->asb_page); |
| xmit_command = xsrb.command; |
| |
| writeb(xmit_command, ti->asb + COMMAND_OFST); |
| writew(xsrb.station_id, ti->asb + STATION_ID_OFST); |
| writeb(llc_ssap, ti->asb + RSAP_VALUE_OFST); |
| writeb(xsrb.cmd_corr, ti->asb + CMD_CORRELATE_OFST); |
| writeb(0, ti->asb + RETCODE_OFST); |
| if ((xmit_command == XMIT_XID_CMD) || (xmit_command == XMIT_TEST_CMD)) { |
| writew(htons(0x11), ti->asb + FRAME_LENGTH_OFST); |
| writeb(0x0e, ti->asb + HEADER_LENGTH_OFST); |
| SET_PAGE(dhb_page); |
| writeb(AC, dhbuf); |
| writeb(LLC_FRAME, dhbuf + 1); |
| for (i = 0; i < TR_ALEN; i++) |
| writeb((int) 0x0FF, dhbuf + i + 2); |
| for (i = 0; i < TR_ALEN; i++) |
| writeb(0, dhbuf + i + TR_ALEN + 2); |
| writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| return; |
| } |
| /* |
| * the token ring packet is copied from sk_buff to the adapter |
| * buffer identified in the command data received with the interrupt. |
| */ |
| writeb(hdr_len, ti->asb + HEADER_LENGTH_OFST); |
| writew(htons(ti->current_skb->len), ti->asb + FRAME_LENGTH_OFST); |
| src_len=ti->current_skb->len; |
| src_offset=0; |
| dhb=dhb_base; |
| while(1) { |
| if (ti->page_mask) { |
| dhb_page=(dhb >> 8) & ti->page_mask; |
| dhb=dhb & ~(ti->page_mask << 8); |
| dhb_len=0x4000-dhb; /* remaining size of this page */ |
| } |
| dhbuf = ti->sram_virt + dhb; |
| SET_PAGE(dhb_page); |
| if (src_len > dhb_len) { |
| memcpy_toio(dhbuf,&ti->current_skb->data[src_offset], |
| dhb_len); |
| src_len -= dhb_len; |
| src_offset += dhb_len; |
| dhb_base+=dhb_len; |
| dhb=dhb_base; |
| continue; |
| } |
| memcpy_toio(dhbuf, &ti->current_skb->data[src_offset], src_len); |
| break; |
| } |
| writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| dev->stats.tx_bytes += ti->current_skb->len; |
| dev_kfree_skb_irq(ti->current_skb); |
| ti->current_skb = NULL; |
| netif_wake_queue(dev); |
| if (ti->readlog_pending) |
| ibmtr_readlog(dev); |
| } /*tr_tx */ |
| |
| /*****************************************************************************/ |
| |
| |
| #define RECEIVE_BUFFER_OFST 6 |
| #define LAN_HDR_LENGTH_OFST 8 |
| #define DLC_HDR_LENGTH_OFST 9 |
| |
| #define DSAP_OFST 0 |
| #define SSAP_OFST 1 |
| #define LLC_OFST 2 |
| #define PROTID_OFST 3 |
| #define ETHERTYPE_OFST 6 |
| |
| static void tr_rx(struct net_device *dev) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| __u32 rbuffer; |
| void __iomem *rbuf, *rbufdata, *llc; |
| __u8 rbuffer_page = 0; |
| unsigned char *data; |
| unsigned int rbuffer_len, lan_hdr_len, hdr_len, ip_len, length; |
| unsigned char dlc_hdr_len; |
| struct sk_buff *skb; |
| unsigned int skb_size = 0; |
| int IPv4_p = 0; |
| unsigned int chksum = 0; |
| struct iphdr *iph; |
| struct arb_rec_req rarb; |
| |
| SET_PAGE(ti->arb_page); |
| memcpy_fromio(&rarb, ti->arb, sizeof(rarb)); |
| rbuffer = ntohs(rarb.rec_buf_addr) ; |
| rbuf = map_address(ti, rbuffer, &rbuffer_page); |
| |
| SET_PAGE(ti->asb_page); |
| |
| if (readb(ti->asb + RETCODE_OFST) !=0xFF) DPRINTK("ASB not free !!!\n"); |
| |
| writeb(REC_DATA, ti->asb + COMMAND_OFST); |
| writew(rarb.station_id, ti->asb + STATION_ID_OFST); |
| writew(rarb.rec_buf_addr, ti->asb + RECEIVE_BUFFER_OFST); |
| |
| lan_hdr_len = rarb.lan_hdr_len; |
| if (lan_hdr_len > sizeof(struct trh_hdr)) { |
| DPRINTK("Linux cannot handle greater than 18 bytes RIF\n"); |
| return; |
| } /*BMS I added this above just to be very safe */ |
| dlc_hdr_len = readb(ti->arb + DLC_HDR_LENGTH_OFST); |
| hdr_len = lan_hdr_len + sizeof(struct trllc) + sizeof(struct iphdr); |
| |
| SET_PAGE(rbuffer_page); |
| llc = rbuf + offsetof(struct rec_buf, data) + lan_hdr_len; |
| |
| #if TR_VERBOSE |
| DPRINTK("offsetof data: %02X lan_hdr_len: %02X\n", |
| (__u32) offsetof(struct rec_buf, data), (unsigned int) lan_hdr_len); |
| DPRINTK("llc: %08X rec_buf_addr: %04X dev->mem_start: %lX\n", |
| llc, ntohs(rarb.rec_buf_addr), dev->mem_start); |
| DPRINTK("dsap: %02X, ssap: %02X, llc: %02X, protid: %02X%02X%02X, " |
| "ethertype: %04X\n", |
| (int) readb(llc + DSAP_OFST), (int) readb(llc + SSAP_OFST), |
| (int) readb(llc + LLC_OFST), (int) readb(llc + PROTID_OFST), |
| (int) readb(llc+PROTID_OFST+1),(int)readb(llc+PROTID_OFST + 2), |
| (int) ntohs(readw(llc + ETHERTYPE_OFST))); |
| #endif |
| if (readb(llc + offsetof(struct trllc, llc)) != UI_CMD) { |
| SET_PAGE(ti->asb_page); |
| writeb(DATA_LOST, ti->asb + RETCODE_OFST); |
| dev->stats.rx_dropped++; |
| writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| return; |
| } |
| length = ntohs(rarb.frame_len); |
| if (readb(llc + DSAP_OFST) == EXTENDED_SAP && |
| readb(llc + SSAP_OFST) == EXTENDED_SAP && |
| length >= hdr_len) IPv4_p = 1; |
| #if TR_VERBOSE |
| #define SADDR_OFST 8 |
| #define DADDR_OFST 2 |
| |
| if (!IPv4_p) { |
| |
| void __iomem *trhhdr = rbuf + offsetof(struct rec_buf, data); |
| u8 saddr[6]; |
| u8 daddr[6]; |
| int i; |
| for (i = 0 ; i < 6 ; i++) |
| saddr[i] = readb(trhhdr + SADDR_OFST + i); |
| for (i = 0 ; i < 6 ; i++) |
| daddr[i] = readb(trhhdr + DADDR_OFST + i); |
| DPRINTK("Probably non-IP frame received.\n"); |
| DPRINTK("ssap: %02X dsap: %02X " |
| "saddr: %pM daddr: %pM\n", |
| readb(llc + SSAP_OFST), readb(llc + DSAP_OFST), |
| saddr, daddr); |
| } |
| #endif |
| |
| /*BMS handle the case she comes in with few hops but leaves with many */ |
| skb_size=length-lan_hdr_len+sizeof(struct trh_hdr)+sizeof(struct trllc); |
| |
| if (!(skb = dev_alloc_skb(skb_size))) { |
| DPRINTK("out of memory. frame dropped.\n"); |
| dev->stats.rx_dropped++; |
| SET_PAGE(ti->asb_page); |
| writeb(DATA_LOST, ti->asb + offsetof(struct asb_rec, ret_code)); |
| writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| return; |
| } |
| /*BMS again, if she comes in with few but leaves with many */ |
| skb_reserve(skb, sizeof(struct trh_hdr) - lan_hdr_len); |
| skb_put(skb, length); |
| data = skb->data; |
| rbuffer_len = ntohs(readw(rbuf + offsetof(struct rec_buf, buf_len))); |
| rbufdata = rbuf + offsetof(struct rec_buf, data); |
| |
| if (IPv4_p) { |
| /* Copy the headers without checksumming */ |
| memcpy_fromio(data, rbufdata, hdr_len); |
| |
| /* Watch for padded packets and bogons */ |
| iph= (struct iphdr *)(data+ lan_hdr_len + sizeof(struct trllc)); |
| ip_len = ntohs(iph->tot_len) - sizeof(struct iphdr); |
| length -= hdr_len; |
| if ((ip_len <= length) && (ip_len > 7)) |
| length = ip_len; |
| data += hdr_len; |
| rbuffer_len -= hdr_len; |
| rbufdata += hdr_len; |
| } |
| /* Copy the payload... */ |
| #define BUFFER_POINTER_OFST 2 |
| #define BUFFER_LENGTH_OFST 6 |
| for (;;) { |
| if (ibmtr_debug_trace&TRC_INITV && length < rbuffer_len) |
| DPRINTK("CURIOUS, length=%d < rbuffer_len=%d\n", |
| length,rbuffer_len); |
| if (IPv4_p) |
| chksum=csum_partial_copy_nocheck((void*)rbufdata, |
| data,length<rbuffer_len?length:rbuffer_len,chksum); |
| else |
| memcpy_fromio(data, rbufdata, rbuffer_len); |
| rbuffer = ntohs(readw(rbuf+BUFFER_POINTER_OFST)) ; |
| if (!rbuffer) |
| break; |
| rbuffer -= 2; |
| length -= rbuffer_len; |
| data += rbuffer_len; |
| rbuf = map_address(ti, rbuffer, &rbuffer_page); |
| SET_PAGE(rbuffer_page); |
| rbuffer_len = ntohs(readw(rbuf + BUFFER_LENGTH_OFST)); |
| rbufdata = rbuf + offsetof(struct rec_buf, data); |
| } |
| |
| SET_PAGE(ti->asb_page); |
| writeb(0, ti->asb + offsetof(struct asb_rec, ret_code)); |
| |
| writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| |
| dev->stats.rx_bytes += skb->len; |
| dev->stats.rx_packets++; |
| |
| skb->protocol = tr_type_trans(skb, dev); |
| if (IPv4_p) { |
| skb->csum = chksum; |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| } |
| netif_rx(skb); |
| } /*tr_rx */ |
| |
| /*****************************************************************************/ |
| |
| static void ibmtr_reset_timer(struct timer_list *tmr, struct net_device *dev) |
| { |
| tmr->expires = jiffies + TR_RETRY_INTERVAL; |
| tmr->data = (unsigned long) dev; |
| tmr->function = tok_rerun; |
| init_timer(tmr); |
| add_timer(tmr); |
| } |
| |
| /*****************************************************************************/ |
| |
| static void tok_rerun(unsigned long dev_addr) |
| { |
| struct net_device *dev = (struct net_device *)dev_addr; |
| struct tok_info *ti = netdev_priv(dev); |
| |
| if ( ti->open_action == RESTART){ |
| ti->do_tok_int = FIRST_INT; |
| outb(0, dev->base_addr + ADAPTRESETREL); |
| #ifdef ENABLE_PAGING |
| if (ti->page_mask) |
| writeb(SRPR_ENABLE_PAGING, |
| ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); |
| #endif |
| |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| } else |
| tok_open_adapter(dev_addr); |
| } |
| |
| /*****************************************************************************/ |
| |
| static void ibmtr_readlog(struct net_device *dev) |
| { |
| struct tok_info *ti; |
| |
| ti = netdev_priv(dev); |
| |
| ti->readlog_pending = 0; |
| SET_PAGE(ti->srb_page); |
| writeb(DIR_READ_LOG, ti->srb); |
| writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); |
| writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); |
| |
| netif_stop_queue(dev); |
| |
| } |
| |
| /*****************************************************************************/ |
| |
| static int ibmtr_change_mtu(struct net_device *dev, int mtu) |
| { |
| struct tok_info *ti = netdev_priv(dev); |
| |
| if (ti->ring_speed == 16 && mtu > ti->maxmtu16) |
| return -EINVAL; |
| if (ti->ring_speed == 4 && mtu > ti->maxmtu4) |
| return -EINVAL; |
| dev->mtu = mtu; |
| return 0; |
| } |
| |
| /*****************************************************************************/ |
| #ifdef MODULE |
| |
| /* 3COM 3C619C supports 8 interrupts, 32 I/O ports */ |
| static struct net_device *dev_ibmtr[IBMTR_MAX_ADAPTERS]; |
| static int io[IBMTR_MAX_ADAPTERS] = { 0xa20, 0xa24 }; |
| static int irq[IBMTR_MAX_ADAPTERS]; |
| static int mem[IBMTR_MAX_ADAPTERS]; |
| |
| MODULE_LICENSE("GPL"); |
| |
| module_param_array(io, int, NULL, 0); |
| module_param_array(irq, int, NULL, 0); |
| module_param_array(mem, int, NULL, 0); |
| |
| static int __init ibmtr_init(void) |
| { |
| int i; |
| int count=0; |
| |
| find_turbo_adapters(io); |
| |
| for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) { |
| struct net_device *dev; |
| irq[i] = 0; |
| mem[i] = 0; |
| dev = alloc_trdev(sizeof(struct tok_info)); |
| if (dev == NULL) { |
| if (i == 0) |
| return -ENOMEM; |
| break; |
| } |
| dev->base_addr = io[i]; |
| dev->irq = irq[i]; |
| dev->mem_start = mem[i]; |
| |
| if (ibmtr_probe_card(dev)) { |
| free_netdev(dev); |
| continue; |
| } |
| dev_ibmtr[i] = dev; |
| count++; |
| } |
| if (count) return 0; |
| printk("ibmtr: register_netdev() returned non-zero.\n"); |
| return -EIO; |
| } |
| module_init(ibmtr_init); |
| |
| static void __exit ibmtr_cleanup(void) |
| { |
| int i; |
| |
| for (i = 0; i < IBMTR_MAX_ADAPTERS; i++){ |
| if (!dev_ibmtr[i]) |
| continue; |
| unregister_netdev(dev_ibmtr[i]); |
| ibmtr_cleanup_card(dev_ibmtr[i]); |
| free_netdev(dev_ibmtr[i]); |
| } |
| } |
| module_exit(ibmtr_cleanup); |
| #endif |