| /***************************************************************************** |
| * * |
| * File: mv88x201x.c * |
| * $Revision: 1.12 $ * |
| * $Date: 2005/04/15 19:27:14 $ * |
| * Description: * |
| * Marvell PHY (mv88x201x) functionality. * |
| * part of the Chelsio 10Gb Ethernet Driver. * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License, version 2, as * |
| * published by the Free Software Foundation. * |
| * * |
| * You should have received a copy of the GNU General Public License along * |
| * with this program; if not, write to the Free Software Foundation, Inc., * |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
| * * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * |
| * * |
| * http://www.chelsio.com * |
| * * |
| * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * |
| * All rights reserved. * |
| * * |
| * Maintainers: maintainers@chelsio.com * |
| * * |
| * Authors: Dimitrios Michailidis <dm@chelsio.com> * |
| * Tina Yang <tainay@chelsio.com> * |
| * Felix Marti <felix@chelsio.com> * |
| * Scott Bardone <sbardone@chelsio.com> * |
| * Kurt Ottaway <kottaway@chelsio.com> * |
| * Frank DiMambro <frank@chelsio.com> * |
| * * |
| * History: * |
| * * |
| ****************************************************************************/ |
| |
| #include "cphy.h" |
| #include "elmer0.h" |
| |
| /* |
| * The 88x2010 Rev C. requires some link status registers * to be read |
| * twice in order to get the right values. Future * revisions will fix |
| * this problem and then this macro * can disappear. |
| */ |
| #define MV88x2010_LINK_STATUS_BUGS 1 |
| |
| static int led_init(struct cphy *cphy) |
| { |
| /* Setup the LED registers so we can turn on/off. |
| * Writing these bits maps control to another |
| * register. mmd(0x1) addr(0x7) |
| */ |
| cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd); |
| return 0; |
| } |
| |
| static int led_link(struct cphy *cphy, u32 do_enable) |
| { |
| u32 led = 0; |
| #define LINK_ENABLE_BIT 0x1 |
| |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led); |
| |
| if (do_enable & LINK_ENABLE_BIT) { |
| led |= LINK_ENABLE_BIT; |
| cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led); |
| } else { |
| led &= ~LINK_ENABLE_BIT; |
| cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led); |
| } |
| return 0; |
| } |
| |
| /* Port Reset */ |
| static int mv88x201x_reset(struct cphy *cphy, int wait) |
| { |
| /* This can be done through registers. It is not required since |
| * a full chip reset is used. |
| */ |
| return 0; |
| } |
| |
| static int mv88x201x_interrupt_enable(struct cphy *cphy) |
| { |
| /* Enable PHY LASI interrupts. */ |
| cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, |
| MDIO_PMA_LASI_LSALARM); |
| |
| /* Enable Marvell interrupts through Elmer0. */ |
| if (t1_is_asic(cphy->adapter)) { |
| u32 elmer; |
| |
| t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); |
| elmer |= ELMER0_GP_BIT6; |
| t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); |
| } |
| return 0; |
| } |
| |
| static int mv88x201x_interrupt_disable(struct cphy *cphy) |
| { |
| /* Disable PHY LASI interrupts. */ |
| cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0); |
| |
| /* Disable Marvell interrupts through Elmer0. */ |
| if (t1_is_asic(cphy->adapter)) { |
| u32 elmer; |
| |
| t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); |
| elmer &= ~ELMER0_GP_BIT6; |
| t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); |
| } |
| return 0; |
| } |
| |
| static int mv88x201x_interrupt_clear(struct cphy *cphy) |
| { |
| u32 elmer; |
| u32 val; |
| |
| #ifdef MV88x2010_LINK_STATUS_BUGS |
| /* Required to read twice before clear takes affect. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val); |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val); |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val); |
| |
| /* Read this register after the others above it else |
| * the register doesn't clear correctly. |
| */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); |
| #endif |
| |
| /* Clear link status. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); |
| /* Clear PHY LASI interrupts. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val); |
| |
| #ifdef MV88x2010_LINK_STATUS_BUGS |
| /* Do it again. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val); |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val); |
| #endif |
| |
| /* Clear Marvell interrupts through Elmer0. */ |
| if (t1_is_asic(cphy->adapter)) { |
| t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); |
| elmer |= ELMER0_GP_BIT6; |
| t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); |
| } |
| return 0; |
| } |
| |
| static int mv88x201x_interrupt_handler(struct cphy *cphy) |
| { |
| /* Clear interrupts */ |
| mv88x201x_interrupt_clear(cphy); |
| |
| /* We have only enabled link change interrupts and so |
| * cphy_cause must be a link change interrupt. |
| */ |
| return cphy_cause_link_change; |
| } |
| |
| static int mv88x201x_set_loopback(struct cphy *cphy, int on) |
| { |
| return 0; |
| } |
| |
| static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, |
| int *speed, int *duplex, int *fc) |
| { |
| u32 val = 0; |
| |
| if (link_ok) { |
| /* Read link status. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val); |
| val &= MDIO_STAT1_LSTATUS; |
| *link_ok = (val == MDIO_STAT1_LSTATUS); |
| /* Turn on/off Link LED */ |
| led_link(cphy, *link_ok); |
| } |
| if (speed) |
| *speed = SPEED_10000; |
| if (duplex) |
| *duplex = DUPLEX_FULL; |
| if (fc) |
| *fc = PAUSE_RX | PAUSE_TX; |
| return 0; |
| } |
| |
| static void mv88x201x_destroy(struct cphy *cphy) |
| { |
| kfree(cphy); |
| } |
| |
| static struct cphy_ops mv88x201x_ops = { |
| .destroy = mv88x201x_destroy, |
| .reset = mv88x201x_reset, |
| .interrupt_enable = mv88x201x_interrupt_enable, |
| .interrupt_disable = mv88x201x_interrupt_disable, |
| .interrupt_clear = mv88x201x_interrupt_clear, |
| .interrupt_handler = mv88x201x_interrupt_handler, |
| .get_link_status = mv88x201x_get_link_status, |
| .set_loopback = mv88x201x_set_loopback, |
| .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | |
| MDIO_DEVS_PHYXS | MDIO_DEVS_WIS), |
| }; |
| |
| static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, |
| const struct mdio_ops *mdio_ops) |
| { |
| u32 val; |
| struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); |
| |
| if (!cphy) |
| return NULL; |
| |
| cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); |
| |
| /* Commands the PHY to enable XFP's clock. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val); |
| cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1); |
| |
| /* Clear link status. Required because of a bug in the PHY. */ |
| cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val); |
| cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val); |
| |
| /* Allows for Link,Ack LED turn on/off */ |
| led_init(cphy); |
| return cphy; |
| } |
| |
| /* Chip Reset */ |
| static int mv88x201x_phy_reset(adapter_t *adapter) |
| { |
| u32 val; |
| |
| t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~4; |
| t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| msleep(100); |
| |
| t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); |
| msleep(1000); |
| |
| /* Now lets enable the Laser. Delay 100us */ |
| t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val |= 0x8000; |
| t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(100); |
| return 0; |
| } |
| |
| const struct gphy t1_mv88x201x_ops = { |
| .create = mv88x201x_phy_create, |
| .reset = mv88x201x_phy_reset |
| }; |
