IIO: Move the core files to drivers/iio
Take the core support + the kfifo buffer implentation out of
staging. Whilst we are far from done in improving this subsystem
it is now at a stage where the userspae interfaces (provided by
the core) can be considered stable.
Drivers will follow over a longer time scale.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/Kconfig b/drivers/Kconfig
index d236aef..0265cb1 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -140,4 +140,6 @@
source "drivers/devfreq/Kconfig"
+source "drivers/iio/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c8..cdbe362 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,3 +134,4 @@
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
+obj-$(CONFIG_IIO) += iio/
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
new file mode 100644
index 0000000..3ab7d48
--- /dev/null
+++ b/drivers/iio/Kconfig
@@ -0,0 +1,51 @@
+#
+# Industrial I/O subsytem configuration
+#
+
+menuconfig IIO
+ tristate "Industrial I/O support"
+ depends on GENERIC_HARDIRQS
+ help
+ The industrial I/O subsystem provides a unified framework for
+ drivers for many different types of embedded sensors using a
+ number of different physical interfaces (i2c, spi, etc). See
+ Documentation/iio for more information.
+
+if IIO
+
+config IIO_BUFFER
+ bool "Enable buffer support within IIO"
+ help
+ Provide core support for various buffer based data
+ acquisition methods.
+
+if IIO_BUFFER
+
+config IIO_KFIFO_BUF
+ select IIO_TRIGGER
+ tristate "Industrial I/O buffering based on kfifo"
+ help
+ A simple fifo based on kfifo. Use this if you want a fifo
+ rather than a ring buffer. Note that this currently provides
+ no buffer events so it is up to userspace to work out how
+ often to read from the buffer.
+
+endif # IIO_BUFFER
+
+config IIO_TRIGGER
+ boolean "Enable triggered sampling support"
+ help
+ Provides IIO core support for triggers. Currently these
+ are used to initialize capture of samples to push into
+ ring buffers. The triggers are effectively a 'capture
+ data now' interrupt.
+
+config IIO_CONSUMERS_PER_TRIGGER
+ int "Maximum number of consumers per trigger"
+ depends on IIO_TRIGGER
+ default "2"
+ help
+ This value controls the maximum number of consumers that a
+ given trigger may handle. Default is 2.
+
+endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
new file mode 100644
index 0000000..d5fc57d
--- /dev/null
+++ b/drivers/iio/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the industrial I/O core.
+#
+
+obj-$(CONFIG_IIO) += industrialio.o
+industrialio-y := industrialio-core.o industrialio-event.o inkern.o
+industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
+industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+
+obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
diff --git a/drivers/staging/iio/iio_core.h b/drivers/iio/iio_core.h
similarity index 100%
rename from drivers/staging/iio/iio_core.h
rename to drivers/iio/iio_core.h
diff --git a/drivers/staging/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h
similarity index 100%
rename from drivers/staging/iio/iio_core_trigger.h
rename to drivers/iio/iio_core_trigger.h
diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
similarity index 100%
rename from drivers/staging/iio/industrialio-buffer.c
rename to drivers/iio/industrialio-buffer.c
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
similarity index 100%
rename from drivers/staging/iio/industrialio-core.c
rename to drivers/iio/industrialio-core.c
diff --git a/drivers/staging/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
similarity index 100%
rename from drivers/staging/iio/industrialio-event.c
rename to drivers/iio/industrialio-event.c
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
similarity index 100%
rename from drivers/staging/iio/industrialio-trigger.c
rename to drivers/iio/industrialio-trigger.c
diff --git a/drivers/staging/iio/inkern.c b/drivers/iio/inkern.c
similarity index 100%
rename from drivers/staging/iio/inkern.c
rename to drivers/iio/inkern.c
diff --git a/drivers/staging/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
similarity index 100%
rename from drivers/staging/iio/kfifo_buf.c
rename to drivers/iio/kfifo_buf.c
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index fe1586718..c1054a1 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -1,16 +1,9 @@
#
# Industrial I/O subsytem configuration
#
+menu "IIO staging drivers"
+ depends on IIO
-menuconfig IIO
- tristate "Industrial I/O support"
- depends on GENERIC_HARDIRQS
- help
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- drivers/staging/iio/Documentation for more information.
-if IIO
config IIO_ST_HWMON
tristate "Hwmon driver that uses channels specified via iio maps"
depends on HWMON
@@ -19,12 +12,6 @@
map allows IIO devices to provide basic hwmon functionality
for those channels specified in the map.
-config IIO_BUFFER
- bool "Enable buffer support within IIO"
- help
- Provide core support for various buffer based data
- acquisition methods.
-
if IIO_BUFFER
config IIO_SW_RING
@@ -36,33 +23,8 @@
with the intention that some devices would be able to write
in interrupt context.
-config IIO_KFIFO_BUF
- select IIO_TRIGGER
- tristate "Industrial I/O buffering based on kfifo"
- help
- A simple fifo based on kfifo. Use this if you want a fifo
- rather than a ring buffer. Note that this currently provides
- no buffer events so it is up to userspace to work out how
- often to read from the buffer.
-
endif # IIO_BUFFER
-config IIO_TRIGGER
- boolean "Enable triggered sampling support"
- help
- Provides IIO core support for triggers. Currently these
- are used to initialize capture of samples to push into
- ring buffers. The triggers are effectively a 'capture
- data now' interrupt.
-
-config IIO_CONSUMERS_PER_TRIGGER
- int "Maximum number of consumers per trigger"
- depends on IIO_TRIGGER
- default "2"
- help
- This value controls the maximum number of consumers that a
- given trigger may handle. Default is 2.
-
source "drivers/staging/iio/accel/Kconfig"
source "drivers/staging/iio/adc/Kconfig"
source "drivers/staging/iio/addac/Kconfig"
@@ -104,4 +66,4 @@
endif # IIO_SIMPLE_DUMMY
-endif # IIO
+endmenu
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 5075291..2acd42f 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -2,13 +2,7 @@
# Makefile for the industrial I/O core.
#
-obj-$(CONFIG_IIO) += industrialio.o
-industrialio-y := industrialio-core.o industrialio-event.o inkern.o
-industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
-industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
-
obj-$(CONFIG_IIO_SW_RING) += ring_sw.o
-obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
iio_dummy-y := iio_simple_dummy.o
