diff --git a/drivers/Kconfig b/drivers/Kconfig
index d236aef..0265cb1 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -140,4 +140,6 @@
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/iio/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c8..cdbe362 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,3 +134,4 @@
 obj-$(CONFIG_HYPERV)		+= hv/
 
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_IIO)		+= iio/
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
new file mode 100644
index 0000000..3ab7d48
--- /dev/null
+++ b/drivers/iio/Kconfig
@@ -0,0 +1,51 @@
+#
+# Industrial I/O subsytem configuration
+#
+
+menuconfig IIO
+	tristate "Industrial I/O support"
+	depends on GENERIC_HARDIRQS
+	help
+	  The industrial I/O subsystem provides a unified framework for
+	  drivers for many different types of embedded sensors using a
+	  number of different physical interfaces (i2c, spi, etc). See
+	  Documentation/iio for more information.
+
+if IIO
+
+config IIO_BUFFER
+	bool "Enable buffer support within IIO"
+	help
+	  Provide core support for various buffer based data
+	  acquisition methods.
+
+if IIO_BUFFER
+
+config IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	tristate "Industrial I/O buffering based on kfifo"
+	help
+	  A simple fifo based on kfifo.  Use this if you want a fifo
+	  rather than a ring buffer. Note that this currently provides
+	  no buffer events so it is up to userspace to work out how
+	  often to read from the buffer.
+
+endif # IIO_BUFFER
+
+config IIO_TRIGGER
+	boolean "Enable triggered sampling support"
+	help
+	  Provides IIO core support for triggers.  Currently these
+	  are used to initialize capture of samples to push into
+	  ring buffers.  The triggers are effectively a 'capture
+	  data now' interrupt.
+
+config IIO_CONSUMERS_PER_TRIGGER
+       int "Maximum number of consumers per trigger"
+       depends on IIO_TRIGGER
+       default "2"
+       help
+	This value controls the maximum number of consumers that a
+	given trigger may handle. Default is 2.
+
+endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
new file mode 100644
index 0000000..d5fc57d
--- /dev/null
+++ b/drivers/iio/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the industrial I/O core.
+#
+
+obj-$(CONFIG_IIO) += industrialio.o
+industrialio-y := industrialio-core.o industrialio-event.o inkern.o
+industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
+industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+
+obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
diff --git a/drivers/staging/iio/iio_core.h b/drivers/iio/iio_core.h
similarity index 100%
rename from drivers/staging/iio/iio_core.h
rename to drivers/iio/iio_core.h
diff --git a/drivers/staging/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h
similarity index 100%
rename from drivers/staging/iio/iio_core_trigger.h
rename to drivers/iio/iio_core_trigger.h
diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
similarity index 100%
rename from drivers/staging/iio/industrialio-buffer.c
rename to drivers/iio/industrialio-buffer.c
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
similarity index 100%
rename from drivers/staging/iio/industrialio-core.c
rename to drivers/iio/industrialio-core.c
diff --git a/drivers/staging/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
similarity index 100%
rename from drivers/staging/iio/industrialio-event.c
rename to drivers/iio/industrialio-event.c
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
similarity index 100%
rename from drivers/staging/iio/industrialio-trigger.c
rename to drivers/iio/industrialio-trigger.c
diff --git a/drivers/staging/iio/inkern.c b/drivers/iio/inkern.c
similarity index 100%
rename from drivers/staging/iio/inkern.c
rename to drivers/iio/inkern.c
diff --git a/drivers/staging/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
similarity index 100%
rename from drivers/staging/iio/kfifo_buf.c
rename to drivers/iio/kfifo_buf.c
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index fe1586718..c1054a1 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -1,16 +1,9 @@
 #
 # Industrial I/O subsytem configuration
 #
+menu "IIO staging drivers"
+	depends on IIO
 
-menuconfig IIO
-	tristate "Industrial I/O support"
-	depends on GENERIC_HARDIRQS
-	help
-	  The industrial I/O subsystem provides a unified framework for
-	  drivers for many different types of embedded sensors using a
-	  number of different physical interfaces (i2c, spi, etc). See
-	  drivers/staging/iio/Documentation for more information.
-if IIO
 config IIO_ST_HWMON
 	tristate "Hwmon driver that uses channels specified via iio maps"
 	depends on HWMON
@@ -19,12 +12,6 @@
 	  map allows IIO devices to provide  basic hwmon functionality
 	  for those channels specified in the map.
 
-config IIO_BUFFER
-	bool "Enable buffer support within IIO"
-	help
-	  Provide core support for various buffer based data
-	  acquisition methods.
-
 if IIO_BUFFER
 
 config IIO_SW_RING
@@ -36,33 +23,8 @@
 	  with the intention that some devices would be able to write
 	  in interrupt context.
 
-config IIO_KFIFO_BUF
-	select IIO_TRIGGER
-	tristate "Industrial I/O buffering based on kfifo"
-	help
-	  A simple fifo based on kfifo.  Use this if you want a fifo
-	  rather than a ring buffer. Note that this currently provides
-	  no buffer events so it is up to userspace to work out how
-	  often to read from the buffer.
-
 endif # IIO_BUFFER
 
-config IIO_TRIGGER
-	boolean "Enable triggered sampling support"
-	help
-	  Provides IIO core support for triggers.  Currently these
-	  are used to initialize capture of samples to push into
-	  ring buffers.  The triggers are effectively a 'capture
-	  data now' interrupt.
-
-config IIO_CONSUMERS_PER_TRIGGER
-       int "Maximum number of consumers per trigger"
-       depends on IIO_TRIGGER
-       default "2"
-       help
-	This value controls the maximum number of consumers that a
-	given trigger may handle. Default is 2.
-
 source "drivers/staging/iio/accel/Kconfig"
 source "drivers/staging/iio/adc/Kconfig"
 source "drivers/staging/iio/addac/Kconfig"
@@ -104,4 +66,4 @@
 
 endif # IIO_SIMPLE_DUMMY
 
-endif # IIO
+endmenu
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 5075291..2acd42f 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -2,13 +2,7 @@
 # Makefile for the industrial I/O core.
 #
 
-obj-$(CONFIG_IIO) += industrialio.o
-industrialio-y := industrialio-core.o industrialio-event.o inkern.o
-industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
-industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
-
 obj-$(CONFIG_IIO_SW_RING) += ring_sw.o
-obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
 
 obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
 iio_dummy-y := iio_simple_dummy.o