| # arch/arm/mach-exynos4/Kconfig |
| # |
| # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| # http://www.samsung.com/ |
| # |
| # Licensed under GPLv2 |
| |
| # Configuration options for the EXYNOS4 |
| |
| if ARCH_EXYNOS4 |
| |
| config CPU_EXYNOS4210 |
| bool |
| select S3C_PL330_DMA |
| help |
| Enable EXYNOS4210 CPU support |
| |
| config EXYNOS4_MCT |
| bool "Kernel timer support by MCT" |
| help |
| Use MCT (Multi Core Timer) as kernel timers |
| |
| config EXYNOS4_DEV_AHCI |
| bool |
| help |
| Compile in platform device definitions for AHCI |
| |
| config EXYNOS4_DEV_PD |
| bool |
| help |
| Compile in platform device definitions for Power Domain |
| |
| config EXYNOS4_DEV_SYSMMU |
| bool |
| help |
| Common setup code for SYSTEM MMU in EXYNOS4 |
| |
| config EXYNOS4_SETUP_I2C1 |
| bool |
| help |
| Common setup code for i2c bus 1. |
| |
| config EXYNOS4_SETUP_I2C2 |
| bool |
| help |
| Common setup code for i2c bus 2. |
| |
| config EXYNOS4_SETUP_I2C3 |
| bool |
| help |
| Common setup code for i2c bus 3. |
| |
| config EXYNOS4_SETUP_I2C4 |
| bool |
| help |
| Common setup code for i2c bus 4. |
| |
| config EXYNOS4_SETUP_I2C5 |
| bool |
| help |
| Common setup code for i2c bus 5. |
| |
| config EXYNOS4_SETUP_I2C6 |
| bool |
| help |
| Common setup code for i2c bus 6. |
| |
| config EXYNOS4_SETUP_I2C7 |
| bool |
| help |
| Common setup code for i2c bus 7. |
| |
| config EXYNOS4_SETUP_KEYPAD |
| bool |
| help |
| Common setup code for keypad. |
| |
| config EXYNOS4_SETUP_SDHCI |
| bool |
| select EXYNOS4_SETUP_SDHCI_GPIO |
| help |
| Internal helper functions for EXYNOS4 based SDHCI systems. |
| |
| config EXYNOS4_SETUP_SDHCI_GPIO |
| bool |
| help |
| Common setup code for SDHCI gpio. |
| |
| config EXYNOS4_SETUP_FIMC |
| bool |
| help |
| Common setup code for the camera interfaces. |
| |
| # machine support |
| |
| menu "EXYNOS4 Machines" |
| |
| config MACH_SMDKC210 |
| bool "SMDKC210" |
| select CPU_EXYNOS4210 |
| select S3C_DEV_RTC |
| select S3C_DEV_WDT |
| select S3C_DEV_I2C1 |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC1 |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select EXYNOS4_DEV_PD |
| select EXYNOS4_DEV_SYSMMU |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_SDHCI |
| help |
| Machine support for Samsung SMDKC210 |
| |
| config MACH_SMDKV310 |
| bool "SMDKV310" |
| select CPU_EXYNOS4210 |
| select S3C_DEV_RTC |
| select S3C_DEV_WDT |
| select S3C_DEV_I2C1 |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC1 |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select SAMSUNG_DEV_KEYPAD |
| select EXYNOS4_DEV_PD |
| select EXYNOS4_DEV_SYSMMU |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_KEYPAD |
| select EXYNOS4_SETUP_SDHCI |
| help |
| Machine support for Samsung SMDKV310 |
| |
| config MACH_ARMLEX4210 |
| bool "ARMLEX4210" |
| select CPU_EXYNOS4210 |
| select S3C_DEV_RTC |
| select S3C_DEV_WDT |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select EXYNOS4_DEV_AHCI |
| select EXYNOS4_DEV_SYSMMU |
| select EXYNOS4_SETUP_SDHCI |
| help |
| Machine support for Samsung ARMLEX4210 based on EXYNOS4210 |
| |
| config MACH_UNIVERSAL_C210 |
| bool "Mobile UNIVERSAL_C210 Board" |
| select CPU_EXYNOS4210 |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_I2C5 |
| select S5P_DEV_ONENAND |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_I2C5 |
| select EXYNOS4_SETUP_SDHCI |
| help |
| Machine support for Samsung Mobile Universal S5PC210 Reference |
| Board. |
| |
| config MACH_NURI |
| bool "Mobile NURI Board" |
| select CPU_EXYNOS4210 |
| select S3C_DEV_WDT |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_I2C3 |
| select S3C_DEV_I2C5 |
| select S5P_DEV_USB_EHCI |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_I2C3 |
| select EXYNOS4_SETUP_I2C5 |
| select EXYNOS4_SETUP_SDHCI |
| select SAMSUNG_DEV_PWM |
| help |
| Machine support for Samsung Mobile NURI Board. |
| |
| endmenu |
| |
| comment "Configuration for HSMMC bus width" |
| |
| menu "Use 8-bit bus width" |
| |
| config EXYNOS4_SDHCI_CH0_8BIT |
| bool "Channel 0 with 8-bit bus" |
| help |
| Support HSMMC Channel 0 8-bit bus. |
| If selected, Channel 1 is disabled. |
| |
| config EXYNOS4_SDHCI_CH2_8BIT |
| bool "Channel 2 with 8-bit bus" |
| help |
| Support HSMMC Channel 2 8-bit bus. |
| If selected, Channel 3 is disabled. |
| |
| endmenu |
| |
| endif |
