| /*************************************************************************** |
| * |
| * Copyright (C) 2007-2008 SMSC |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/slab.h> |
| #include "smsc95xx.h" |
| |
| #define SMSC_CHIPNAME "smsc95xx" |
| #define SMSC_DRIVER_VERSION "1.0.4" |
| #define HS_USB_PKT_SIZE (512) |
| #define FS_USB_PKT_SIZE (64) |
| #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) |
| #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) |
| #define DEFAULT_BULK_IN_DELAY (0x00002000) |
| #define MAX_SINGLE_PACKET_SIZE (2048) |
| #define LAN95XX_EEPROM_MAGIC (0x9500) |
| #define EEPROM_MAC_OFFSET (0x01) |
| #define DEFAULT_TX_CSUM_ENABLE (true) |
| #define DEFAULT_RX_CSUM_ENABLE (true) |
| #define SMSC95XX_INTERNAL_PHY_ID (1) |
| #define SMSC95XX_TX_OVERHEAD (8) |
| #define SMSC95XX_TX_OVERHEAD_CSUM (12) |
| |
| struct smsc95xx_priv { |
| u32 mac_cr; |
| u32 hash_hi; |
| u32 hash_lo; |
| spinlock_t mac_cr_lock; |
| }; |
| |
| struct usb_context { |
| struct usb_ctrlrequest req; |
| struct usbnet *dev; |
| }; |
| |
| static bool turbo_mode = true; |
| module_param(turbo_mode, bool, 0644); |
| MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); |
| |
| static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data) |
| { |
| u32 *buf = kmalloc(4, GFP_KERNEL); |
| int ret; |
| |
| BUG_ON(!dev); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), |
| USB_VENDOR_REQUEST_READ_REGISTER, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, buf, 4, USB_CTRL_GET_TIMEOUT); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to read register index 0x%08x\n", index); |
| |
| le32_to_cpus(buf); |
| *data = *buf; |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static int smsc95xx_write_reg(struct usbnet *dev, u32 index, u32 data) |
| { |
| u32 *buf = kmalloc(4, GFP_KERNEL); |
| int ret; |
| |
| BUG_ON(!dev); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| *buf = data; |
| cpu_to_le32s(buf); |
| |
| ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| USB_VENDOR_REQUEST_WRITE_REGISTER, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, buf, 4, USB_CTRL_SET_TIMEOUT); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to write register index 0x%08x\n", index); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| /* Loop until the read is completed with timeout |
| * called with phy_mutex held */ |
| static int smsc95xx_phy_wait_not_busy(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, MII_ADDR, &val); |
| if (!(val & MII_BUSY_)) |
| return 0; |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| return -EIO; |
| } |
| |
| static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n"); |
| mutex_unlock(&dev->phy_mutex); |
| return -EIO; |
| } |
| |
| /* set the address, index & direction (read from PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = (phy_id << 11) | (idx << 6) | MII_READ_; |
| smsc95xx_write_reg(dev, MII_ADDR, addr); |
| |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx); |
| mutex_unlock(&dev->phy_mutex); |
| return -EIO; |
| } |
| |
| smsc95xx_read_reg(dev, MII_DATA, &val); |
| |
| mutex_unlock(&dev->phy_mutex); |
| |
| return (u16)(val & 0xFFFF); |
| } |
| |
| static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx, |
| int regval) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n"); |
| mutex_unlock(&dev->phy_mutex); |
| return; |
| } |
| |
| val = regval; |
| smsc95xx_write_reg(dev, MII_DATA, val); |
| |
| /* set the address, index & direction (write to PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; |
| smsc95xx_write_reg(dev, MII_ADDR, addr); |
| |
| if (smsc95xx_phy_wait_not_busy(dev)) |
| netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx); |
| |
| mutex_unlock(&dev->phy_mutex); |
| } |
| |
| static int smsc95xx_wait_eeprom(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, E2P_CMD, &val); |
| if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_)) |
| break; |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) { |
| netdev_warn(dev->net, "EEPROM read operation timeout\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, E2P_CMD, &val); |
| |
| if (!(val & E2P_CMD_BUSY_)) |
| return 0; |
| |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| netdev_warn(dev->net, "EEPROM is busy\n"); |
| return -EIO; |
| } |
| |
| static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc95xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_); |
| smsc95xx_write_reg(dev, E2P_CMD, val); |
| |
| ret = smsc95xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| smsc95xx_read_reg(dev, E2P_DATA, &val); |
| |
| data[i] = val & 0xFF; |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc95xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| /* Issue write/erase enable command */ |
| val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_; |
| smsc95xx_write_reg(dev, E2P_CMD, val); |
| |
| ret = smsc95xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| |
| /* Fill data register */ |
| val = data[i]; |
| smsc95xx_write_reg(dev, E2P_DATA, val); |
| |
| /* Send "write" command */ |
| val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_); |
| smsc95xx_write_reg(dev, E2P_CMD, val); |
| |
| ret = smsc95xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static void smsc95xx_async_cmd_callback(struct urb *urb) |
| { |
| struct usb_context *usb_context = urb->context; |
| struct usbnet *dev = usb_context->dev; |
| int status = urb->status; |
| |
| if (status < 0) |
| netdev_warn(dev->net, "async callback failed with %d\n", status); |
| |
| kfree(usb_context); |
| usb_free_urb(urb); |
| } |
| |
| static int smsc95xx_write_reg_async(struct usbnet *dev, u16 index, u32 *data) |
| { |
| struct usb_context *usb_context; |
| int status; |
| struct urb *urb; |
| const u16 size = 4; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| netdev_warn(dev->net, "Error allocating URB\n"); |
| return -ENOMEM; |
| } |
| |
| usb_context = kmalloc(sizeof(struct usb_context), GFP_ATOMIC); |
| if (usb_context == NULL) { |
| netdev_warn(dev->net, "Error allocating control msg\n"); |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| usb_context->req.bRequestType = |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; |
| usb_context->req.bRequest = USB_VENDOR_REQUEST_WRITE_REGISTER; |
| usb_context->req.wValue = 00; |
| usb_context->req.wIndex = cpu_to_le16(index); |
| usb_context->req.wLength = cpu_to_le16(size); |
| |
| usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| (void *)&usb_context->req, data, size, |
| smsc95xx_async_cmd_callback, |
| (void *)usb_context); |
| |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status < 0) { |
| netdev_warn(dev->net, "Error submitting control msg, sts=%d\n", |
| status); |
| kfree(usb_context); |
| usb_free_urb(urb); |
| } |
| |
| return status; |
| } |
| |
| /* returns hash bit number for given MAC address |
| * example: |
| * 01 00 5E 00 00 01 -> returns bit number 31 */ |
| static unsigned int smsc95xx_hash(char addr[ETH_ALEN]) |
| { |
| return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; |
| } |
| |
| static void smsc95xx_set_multicast(struct net_device *netdev) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| |
| pdata->hash_hi = 0; |
| pdata->hash_lo = 0; |
| |
| spin_lock_irqsave(&pdata->mac_cr_lock, flags); |
| |
| if (dev->net->flags & IFF_PROMISC) { |
| netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n"); |
| pdata->mac_cr |= MAC_CR_PRMS_; |
| pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| } else if (dev->net->flags & IFF_ALLMULTI) { |
| netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n"); |
| pdata->mac_cr |= MAC_CR_MCPAS_; |
| pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_); |
| } else if (!netdev_mc_empty(dev->net)) { |
| struct netdev_hw_addr *ha; |
| |
| pdata->mac_cr |= MAC_CR_HPFILT_; |
| pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); |
| |
| netdev_for_each_mc_addr(ha, netdev) { |
| u32 bitnum = smsc95xx_hash(ha->addr); |
| u32 mask = 0x01 << (bitnum & 0x1F); |
| if (bitnum & 0x20) |
| pdata->hash_hi |= mask; |
| else |
| pdata->hash_lo |= mask; |
| } |
| |
| netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n", |
| pdata->hash_hi, pdata->hash_lo); |
| } else { |
| netif_dbg(dev, drv, dev->net, "receive own packets only\n"); |
| pdata->mac_cr &= |
| ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| } |
| |
| spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); |
| |
| /* Initiate async writes, as we can't wait for completion here */ |
| smsc95xx_write_reg_async(dev, HASHH, &pdata->hash_hi); |
| smsc95xx_write_reg_async(dev, HASHL, &pdata->hash_lo); |
| smsc95xx_write_reg_async(dev, MAC_CR, &pdata->mac_cr); |
| } |
| |
| static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex, |
| u16 lcladv, u16 rmtadv) |
| { |
| u32 flow, afc_cfg = 0; |
| |
| int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg); |
| if (ret < 0) { |
| netdev_warn(dev->net, "error reading AFC_CFG\n"); |
| return; |
| } |
| |
| if (duplex == DUPLEX_FULL) { |
| u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| if (cap & FLOW_CTRL_RX) |
| flow = 0xFFFF0002; |
| else |
| flow = 0; |
| |
| if (cap & FLOW_CTRL_TX) |
| afc_cfg |= 0xF; |
| else |
| afc_cfg &= ~0xF; |
| |
| netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n", |
| cap & FLOW_CTRL_RX ? "enabled" : "disabled", |
| cap & FLOW_CTRL_TX ? "enabled" : "disabled"); |
| } else { |
| netif_dbg(dev, link, dev->net, "half duplex\n"); |
| flow = 0; |
| afc_cfg |= 0xF; |
| } |
| |
| smsc95xx_write_reg(dev, FLOW, flow); |
| smsc95xx_write_reg(dev, AFC_CFG, afc_cfg); |
| } |
| |
| static int smsc95xx_link_reset(struct usbnet *dev) |
| { |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| struct mii_if_info *mii = &dev->mii; |
| struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
| unsigned long flags; |
| u16 lcladv, rmtadv; |
| u32 intdata; |
| |
| /* clear interrupt status */ |
| smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); |
| intdata = 0xFFFFFFFF; |
| smsc95xx_write_reg(dev, INT_STS, intdata); |
| |
| mii_check_media(mii, 1, 1); |
| mii_ethtool_gset(&dev->mii, &ecmd); |
| lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE); |
| rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA); |
| |
| netif_dbg(dev, link, dev->net, |
| "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n", |
| ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv); |
| |
| spin_lock_irqsave(&pdata->mac_cr_lock, flags); |
| if (ecmd.duplex != DUPLEX_FULL) { |
| pdata->mac_cr &= ~MAC_CR_FDPX_; |
| pdata->mac_cr |= MAC_CR_RCVOWN_; |
| } else { |
| pdata->mac_cr &= ~MAC_CR_RCVOWN_; |
| pdata->mac_cr |= MAC_CR_FDPX_; |
| } |
| spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); |
| |
| smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr); |
| |
| smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); |
| |
| return 0; |
| } |
| |
| static void smsc95xx_status(struct usbnet *dev, struct urb *urb) |
| { |
| u32 intdata; |
| |
| if (urb->actual_length != 4) { |
| netdev_warn(dev->net, "unexpected urb length %d\n", |
| urb->actual_length); |
| return; |
| } |
| |
| memcpy(&intdata, urb->transfer_buffer, 4); |
| le32_to_cpus(&intdata); |
| |
| netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata); |
| |
| if (intdata & INT_ENP_PHY_INT_) |
| usbnet_defer_kevent(dev, EVENT_LINK_RESET); |
| else |
| netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n", |
| intdata); |
| } |
| |
| /* Enable or disable Tx & Rx checksum offload engines */ |
| static int smsc95xx_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 read_buf; |
| int ret; |
| |
| ret = smsc95xx_read_reg(dev, COE_CR, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret); |
| return ret; |
| } |
| |
| if (features & NETIF_F_HW_CSUM) |
| read_buf |= Tx_COE_EN_; |
| else |
| read_buf &= ~Tx_COE_EN_; |
| |
| if (features & NETIF_F_RXCSUM) |
| read_buf |= Rx_COE_EN_; |
| else |
| read_buf &= ~Rx_COE_EN_; |
| |
| ret = smsc95xx_write_reg(dev, COE_CR, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write COE_CR: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf); |
| return 0; |
| } |
| |
| static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net) |
| { |
| return MAX_EEPROM_SIZE; |
| } |
| |
| static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| ee->magic = LAN95XX_EEPROM_MAGIC; |
| |
| return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (ee->magic != LAN95XX_EEPROM_MAGIC) { |
| netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n", |
| ee->magic); |
| return -EINVAL; |
| } |
| |
| return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static const struct ethtool_ops smsc95xx_ethtool_ops = { |
| .get_link = usbnet_get_link, |
| .nway_reset = usbnet_nway_reset, |
| .get_drvinfo = usbnet_get_drvinfo, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_settings = usbnet_get_settings, |
| .set_settings = usbnet_set_settings, |
| .get_eeprom_len = smsc95xx_ethtool_get_eeprom_len, |
| .get_eeprom = smsc95xx_ethtool_get_eeprom, |
| .set_eeprom = smsc95xx_ethtool_set_eeprom, |
| }; |
| |
| static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| |
| static void smsc95xx_init_mac_address(struct usbnet *dev) |
| { |
| /* try reading mac address from EEPROM */ |
| if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, |
| dev->net->dev_addr) == 0) { |
| if (is_valid_ether_addr(dev->net->dev_addr)) { |
| /* eeprom values are valid so use them */ |
| netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n"); |
| return; |
| } |
| } |
| |
| /* no eeprom, or eeprom values are invalid. generate random MAC */ |
| eth_hw_addr_random(dev->net); |
| netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n"); |
| } |
| |
| static int smsc95xx_set_mac_address(struct usbnet *dev) |
| { |
| u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 | |
| dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24; |
| u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8; |
| int ret; |
| |
| ret = smsc95xx_write_reg(dev, ADDRL, addr_lo); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write ADDRL: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_write_reg(dev, ADDRH, addr_hi); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write ADDRH: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* starts the TX path */ |
| static void smsc95xx_start_tx_path(struct usbnet *dev) |
| { |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| u32 reg_val; |
| |
| /* Enable Tx at MAC */ |
| spin_lock_irqsave(&pdata->mac_cr_lock, flags); |
| pdata->mac_cr |= MAC_CR_TXEN_; |
| spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); |
| |
| smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr); |
| |
| /* Enable Tx at SCSRs */ |
| reg_val = TX_CFG_ON_; |
| smsc95xx_write_reg(dev, TX_CFG, reg_val); |
| } |
| |
| /* Starts the Receive path */ |
| static void smsc95xx_start_rx_path(struct usbnet *dev) |
| { |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->mac_cr_lock, flags); |
| pdata->mac_cr |= MAC_CR_RXEN_; |
| spin_unlock_irqrestore(&pdata->mac_cr_lock, flags); |
| |
| smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr); |
| } |
| |
| static int smsc95xx_phy_initialize(struct usbnet *dev) |
| { |
| int bmcr, timeout = 0; |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = smsc95xx_mdio_read; |
| dev->mii.mdio_write = smsc95xx_mdio_write; |
| dev->mii.phy_id_mask = 0x1f; |
| dev->mii.reg_num_mask = 0x1f; |
| dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID; |
| |
| /* reset phy and wait for reset to complete */ |
| smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| |
| do { |
| msleep(10); |
| bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); |
| timeout++; |
| } while ((bmcr & BMCR_RESET) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout on PHY Reset"); |
| return -EIO; |
| } |
| |
| smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | |
| ADVERTISE_PAUSE_ASYM); |
| |
| /* read to clear */ |
| smsc95xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); |
| |
| smsc95xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, |
| PHY_INT_MASK_DEFAULT_); |
| mii_nway_restart(&dev->mii); |
| |
| netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n"); |
| return 0; |
| } |
| |
| static int smsc95xx_reset(struct usbnet *dev) |
| { |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| u32 read_buf, write_buf, burst_cap; |
| int ret = 0, timeout; |
| |
| netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n"); |
| |
| write_buf = HW_CFG_LRST_; |
| ret = smsc95xx_write_reg(dev, HW_CFG, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG_LRST_ bit in HW_CFG register, ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| timeout = 0; |
| do { |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| msleep(10); |
| timeout++; |
| } while ((read_buf & HW_CFG_LRST_) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n"); |
| return ret; |
| } |
| |
| write_buf = PM_CTL_PHY_RST_; |
| ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write PM_CTRL: %d\n", ret); |
| return ret; |
| } |
| |
| timeout = 0; |
| do { |
| ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", ret); |
| return ret; |
| } |
| msleep(10); |
| timeout++; |
| } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout waiting for PHY Reset\n"); |
| return ret; |
| } |
| |
| ret = smsc95xx_set_mac_address(dev); |
| if (ret < 0) |
| return ret; |
| |
| netif_dbg(dev, ifup, dev->net, |
| "MAC Address: %pM\n", dev->net->dev_addr); |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from HW_CFG : 0x%08x\n", read_buf); |
| |
| read_buf |= HW_CFG_BIR_; |
| |
| ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG_BIR_ bit in HW_CFG register, ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n", |
| read_buf); |
| |
| if (!turbo_mode) { |
| burst_cap = 0; |
| dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; |
| } else if (dev->udev->speed == USB_SPEED_HIGH) { |
| burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; |
| } else { |
| burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, |
| "rx_urb_size=%ld\n", (ulong)dev->rx_urb_size); |
| |
| ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BURST_CAP after writing: 0x%08x\n", |
| read_buf); |
| |
| read_buf = DEFAULT_BULK_IN_DELAY; |
| ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "ret = %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BULK_IN_DLY after writing: 0x%08x\n", |
| read_buf); |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from HW_CFG: 0x%08x\n", read_buf); |
| |
| if (turbo_mode) |
| read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_); |
| |
| read_buf &= ~HW_CFG_RXDOFF_; |
| |
| /* set Rx data offset=2, Make IP header aligns on word boundary. */ |
| read_buf |= NET_IP_ALIGN << 9; |
| |
| ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG register, ret=%d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from HW_CFG after writing: 0x%08x\n", read_buf); |
| |
| write_buf = 0xFFFFFFFF; |
| ret = smsc95xx_write_reg(dev, INT_STS, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write INT_STS register, ret=%d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = smsc95xx_read_reg(dev, ID_REV, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret); |
| return ret; |
| } |
| netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf); |
| |
| /* Configure GPIO pins as LED outputs */ |
| write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | |
| LED_GPIO_CFG_FDX_LED; |
| ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write LED_GPIO_CFG register, ret=%d\n", |
| ret); |
| return ret; |
| } |
| |
| /* Init Tx */ |
| write_buf = 0; |
| ret = smsc95xx_write_reg(dev, FLOW, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret); |
| return ret; |
| } |
| |
| read_buf = AFC_CFG_DEFAULT; |
| ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write AFC_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| /* Don't need mac_cr_lock during initialisation */ |
| ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret); |
| return ret; |
| } |
| |
| /* Init Rx */ |
| /* Set Vlan */ |
| write_buf = (u32)ETH_P_8021Q; |
| ret = smsc95xx_write_reg(dev, VLAN1, write_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write VAN1: %d\n", ret); |
| return ret; |
| } |
| |
| /* Enable or disable checksum offload engines */ |
| smsc95xx_set_features(dev->net, dev->net->features); |
| |
| smsc95xx_set_multicast(dev->net); |
| |
| if (smsc95xx_phy_initialize(dev) < 0) |
| return -EIO; |
| |
| ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| /* enable PHY interrupts */ |
| read_buf |= INT_EP_CTL_PHY_INT_; |
| |
| ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| smsc95xx_start_tx_path(dev); |
| smsc95xx_start_rx_path(dev); |
| |
| netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n"); |
| return 0; |
| } |
| |
| static const struct net_device_ops smsc95xx_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_change_mtu = usbnet_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = smsc95xx_ioctl, |
| .ndo_set_rx_mode = smsc95xx_set_multicast, |
| .ndo_set_features = smsc95xx_set_features, |
| }; |
| |
| static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc95xx_priv *pdata = NULL; |
| int ret; |
| |
| printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); |
| |
| ret = usbnet_get_endpoints(dev, intf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret); |
| return ret; |
| } |
| |
| dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv), |
| GFP_KERNEL); |
| |
| pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| if (!pdata) { |
| netdev_warn(dev->net, "Unable to allocate struct smsc95xx_priv\n"); |
| return -ENOMEM; |
| } |
| |
| spin_lock_init(&pdata->mac_cr_lock); |
| |
| if (DEFAULT_TX_CSUM_ENABLE) |
| dev->net->features |= NETIF_F_HW_CSUM; |
| if (DEFAULT_RX_CSUM_ENABLE) |
| dev->net->features |= NETIF_F_RXCSUM; |
| |
| dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM; |
| |
| smsc95xx_init_mac_address(dev); |
| |
| /* Init all registers */ |
| ret = smsc95xx_reset(dev); |
| |
| dev->net->netdev_ops = &smsc95xx_netdev_ops; |
| dev->net->ethtool_ops = &smsc95xx_ethtool_ops; |
| dev->net->flags |= IFF_MULTICAST; |
| dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; |
| dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; |
| return 0; |
| } |
| |
| static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); |
| if (pdata) { |
| netif_dbg(dev, ifdown, dev->net, "free pdata\n"); |
| kfree(pdata); |
| pdata = NULL; |
| dev->data[0] = 0; |
| } |
| } |
| |
| static void smsc95xx_rx_csum_offload(struct sk_buff *skb) |
| { |
| skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| skb_trim(skb, skb->len - 2); |
| } |
| |
| static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| while (skb->len > 0) { |
| u32 header, align_count; |
| struct sk_buff *ax_skb; |
| unsigned char *packet; |
| u16 size; |
| |
| memcpy(&header, skb->data, sizeof(header)); |
| le32_to_cpus(&header); |
| skb_pull(skb, 4 + NET_IP_ALIGN); |
| packet = skb->data; |
| |
| /* get the packet length */ |
| size = (u16)((header & RX_STS_FL_) >> 16); |
| align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; |
| |
| if (unlikely(header & RX_STS_ES_)) { |
| netif_dbg(dev, rx_err, dev->net, |
| "Error header=0x%08x\n", header); |
| dev->net->stats.rx_errors++; |
| dev->net->stats.rx_dropped++; |
| |
| if (header & RX_STS_CRC_) { |
| dev->net->stats.rx_crc_errors++; |
| } else { |
| if (header & (RX_STS_TL_ | RX_STS_RF_)) |
| dev->net->stats.rx_frame_errors++; |
| |
| if ((header & RX_STS_LE_) && |
| (!(header & RX_STS_FT_))) |
| dev->net->stats.rx_length_errors++; |
| } |
| } else { |
| /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ |
| if (unlikely(size > (ETH_FRAME_LEN + 12))) { |
| netif_dbg(dev, rx_err, dev->net, |
| "size err header=0x%08x\n", header); |
| return 0; |
| } |
| |
| /* last frame in this batch */ |
| if (skb->len == size) { |
| if (dev->net->features & NETIF_F_RXCSUM) |
| smsc95xx_rx_csum_offload(skb); |
| skb_trim(skb, skb->len - 4); /* remove fcs */ |
| skb->truesize = size + sizeof(struct sk_buff); |
| |
| return 1; |
| } |
| |
| ax_skb = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!ax_skb)) { |
| netdev_warn(dev->net, "Error allocating skb\n"); |
| return 0; |
| } |
| |
| ax_skb->len = size; |
| ax_skb->data = packet; |
| skb_set_tail_pointer(ax_skb, size); |
| |
| if (dev->net->features & NETIF_F_RXCSUM) |
| smsc95xx_rx_csum_offload(ax_skb); |
| skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ |
| ax_skb->truesize = size + sizeof(struct sk_buff); |
| |
| usbnet_skb_return(dev, ax_skb); |
| } |
| |
| skb_pull(skb, size); |
| |
| /* padding bytes before the next frame starts */ |
| if (skb->len) |
| skb_pull(skb, align_count); |
| } |
| |
| if (unlikely(skb->len < 0)) { |
| netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb) |
| { |
| u16 low_16 = (u16)skb_checksum_start_offset(skb); |
| u16 high_16 = low_16 + skb->csum_offset; |
| return (high_16 << 16) | low_16; |
| } |
| |
| static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev, |
| struct sk_buff *skb, gfp_t flags) |
| { |
| bool csum = skb->ip_summed == CHECKSUM_PARTIAL; |
| int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD; |
| u32 tx_cmd_a, tx_cmd_b; |
| |
| /* We do not advertise SG, so skbs should be already linearized */ |
| BUG_ON(skb_shinfo(skb)->nr_frags); |
| |
| if (skb_headroom(skb) < overhead) { |
| struct sk_buff *skb2 = skb_copy_expand(skb, |
| overhead, 0, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| if (csum) { |
| if (skb->len <= 45) { |
| /* workaround - hardware tx checksum does not work |
| * properly with extremely small packets */ |
| long csstart = skb_checksum_start_offset(skb); |
| __wsum calc = csum_partial(skb->data + csstart, |
| skb->len - csstart, 0); |
| *((__sum16 *)(skb->data + csstart |
| + skb->csum_offset)) = csum_fold(calc); |
| |
| csum = false; |
| } else { |
| u32 csum_preamble = smsc95xx_calc_csum_preamble(skb); |
| skb_push(skb, 4); |
| memcpy(skb->data, &csum_preamble, 4); |
| } |
| } |
| |
| skb_push(skb, 4); |
| tx_cmd_b = (u32)(skb->len - 4); |
| if (csum) |
| tx_cmd_b |= TX_CMD_B_CSUM_ENABLE; |
| cpu_to_le32s(&tx_cmd_b); |
| memcpy(skb->data, &tx_cmd_b, 4); |
| |
| skb_push(skb, 4); |
| tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ | |
| TX_CMD_A_LAST_SEG_; |
| cpu_to_le32s(&tx_cmd_a); |
| memcpy(skb->data, &tx_cmd_a, 4); |
| |
| return skb; |
| } |
| |
| static const struct driver_info smsc95xx_info = { |
| .description = "smsc95xx USB 2.0 Ethernet", |
| .bind = smsc95xx_bind, |
| .unbind = smsc95xx_unbind, |
| .link_reset = smsc95xx_link_reset, |
| .reset = smsc95xx_reset, |
| .rx_fixup = smsc95xx_rx_fixup, |
| .tx_fixup = smsc95xx_tx_fixup, |
| .status = smsc95xx_status, |
| .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, |
| }; |
| |
| static const struct usb_device_id products[] = { |
| { |
| /* SMSC9500 USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9500), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9505 USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9505), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500A USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9E00), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9505A USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9E01), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9512/9514 USB Hub & Ethernet Device */ |
| USB_DEVICE(0x0424, 0xec00), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500 USB Ethernet Device (SAL10) */ |
| USB_DEVICE(0x0424, 0x9900), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9505 USB Ethernet Device (SAL10) */ |
| USB_DEVICE(0x0424, 0x9901), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500A USB Ethernet Device (SAL10) */ |
| USB_DEVICE(0x0424, 0x9902), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9505A USB Ethernet Device (SAL10) */ |
| USB_DEVICE(0x0424, 0x9903), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */ |
| USB_DEVICE(0x0424, 0x9904), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500A USB Ethernet Device (HAL) */ |
| USB_DEVICE(0x0424, 0x9905), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9505A USB Ethernet Device (HAL) */ |
| USB_DEVICE(0x0424, 0x9906), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500 USB Ethernet Device (Alternate ID) */ |
| USB_DEVICE(0x0424, 0x9907), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9500A USB Ethernet Device (Alternate ID) */ |
| USB_DEVICE(0x0424, 0x9908), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */ |
| USB_DEVICE(0x0424, 0x9909), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC LAN9530 USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9530), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC LAN9730 USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9730), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { |
| /* SMSC LAN89530 USB Ethernet Device */ |
| USB_DEVICE(0x0424, 0x9E08), |
| .driver_info = (unsigned long) &smsc95xx_info, |
| }, |
| { }, /* END */ |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver smsc95xx_driver = { |
| .name = "smsc95xx", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| .disconnect = usbnet_disconnect, |
| .disable_hub_initiated_lpm = 1, |
| }; |
| |
| module_usb_driver(smsc95xx_driver); |
| |
| MODULE_AUTHOR("Nancy Lin"); |
| MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>"); |
| MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices"); |
| MODULE_LICENSE("GPL"); |