| /* |
| cx231xx-pcb-cfg.h - driver for Conexant |
| Cx23100/101/102 USB video capture devices |
| |
| Copyright (C) 2008 <srinivasa.deevi at conexant dot com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef _PCB_CONFIG_H_ |
| #define _PCB_CONFIG_H_ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| |
| /*************************************************************************** |
| * Class Information * |
| ***************************************************************************/ |
| #define CLASS_DEFAULT 0xFF |
| |
| enum VENDOR_REQUEST_TYPE { |
| /* Set/Get I2C */ |
| VRT_SET_I2C0 = 0x0, |
| VRT_SET_I2C1 = 0x1, |
| VRT_SET_I2C2 = 0x2, |
| VRT_GET_I2C0 = 0x4, |
| VRT_GET_I2C1 = 0x5, |
| VRT_GET_I2C2 = 0x6, |
| |
| /* Set/Get GPIO */ |
| VRT_SET_GPIO = 0x8, |
| VRT_GET_GPIO = 0x9, |
| |
| /* Set/Get GPIE */ |
| VRT_SET_GPIE = 0xA, |
| VRT_GET_GPIE = 0xB, |
| |
| /* Set/Get Register Control/Status */ |
| VRT_SET_REGISTER = 0xC, |
| VRT_GET_REGISTER = 0xD, |
| |
| /* Get Extended Compat ID Descriptor */ |
| VRT_GET_EXTCID_DESC = 0xFF, |
| }; |
| |
| enum BYTE_ENABLE_MASK { |
| ENABLE_ONE_BYTE = 0x1, |
| ENABLE_TWE_BYTE = 0x3, |
| ENABLE_THREE_BYTE = 0x7, |
| ENABLE_FOUR_BYTE = 0xF, |
| }; |
| |
| #define SPEED_MASK 0x1 |
| enum USB_SPEED{ |
| FULL_SPEED = 0x0, /* 0: full speed */ |
| HIGH_SPEED = 0x1 /* 1: high speed */ |
| }; |
| |
| enum _true_false{ |
| FALSE = 0, |
| TRUE = 1 |
| }; |
| |
| #define TS_MASK 0x6 |
| enum TS_PORT{ |
| NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid, |
| only offers Analog TV or Video */ |
| TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode : |
| Digital or External Analog/Compressed source) */ |
| TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs |
| (Dual inputs from Digital and/or |
| External Analog/Compressed sources) */ |
| TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector |
| to external clock */ |
| TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output, |
| TS2 Input (from Compressor) */ |
| }; |
| |
| #define EAVP_MASK 0x8 |
| enum EAV_PRESENT{ |
| NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs |
| (no need for i2s blcok), |
| Analog Tuner must be present */ |
| EXTERNAL_AV = 0x8 /* 1: External A/V inputs |
| present (requires i2s blk) */ |
| }; |
| |
| #define ATM_MASK 0x30 |
| enum AT_MODE{ |
| DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */ |
| BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite & |
| Sound-IF Signals present */ |
| NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */ |
| }; |
| |
| #define PWR_SEL_MASK 0x40 |
| enum POWE_TYPE{ |
| SELF_POWER = 0x0, /* 0: self power */ |
| BUS_POWER = 0x40 /* 1: bus power */ |
| }; |
| |
| enum USB_POWE_TYPE{ |
| USB_SELF_POWER = 0, |
| USB_BUS_POWER |
| }; |
| |
| #define BO_0_MASK 0x80 |
| enum AVDEC_STATUS{ |
| AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */ |
| AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */ |
| }; |
| |
| #define BO_1_MASK 0x100 |
| |
| #define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */ |
| #define SELFPOWER_MASK 0x86 |
| |
| /***************************************************************************/ |
| #define NOT_DECIDE_YET 0xFE |
| #define NOT_SUPPORTED 0xFF |
| |
| /*************************************************************************** |
| * for mod field use * |
| ***************************************************************************/ |
| #define MOD_DIGITAL 0x1 |
| #define MOD_ANALOG 0x2 |
| #define MOD_DIF 0x4 |
| #define MOD_EXTERNAL 0x8 |
| #define CAP_ALL_MOD 0x0f |
| |
| /*************************************************************************** |
| * source define * |
| ***************************************************************************/ |
| #define SOURCE_DIGITAL 0x1 |
| #define SOURCE_ANALOG 0x2 |
| #define SOURCE_DIF 0x4 |
| #define SOURCE_EXTERNAL 0x8 |
| #define SOURCE_TS_BDA 0x10 |
| #define SOURCE_TS_ENCODE 0x20 |
| #define SOURCE_TS_EXTERNAL 0x40 |
| |
| /*************************************************************************** |
| * interface information define * |
| ***************************************************************************/ |
| struct INTERFACE_INFO { |
| u8 interrupt_index; |
| u8 ts1_index; |
| u8 ts2_index; |
| u8 audio_index; |
| u8 video_index; |
| u8 vanc_index; /* VBI */ |
| u8 hanc_index; /* Sliced CC */ |
| u8 ir_index; |
| }; |
| |
| enum INDEX_INTERFACE_INFO{ |
| INDEX_INTERRUPT = 0x0, |
| INDEX_TS1, |
| INDEX_TS2, |
| INDEX_AUDIO, |
| INDEX_VIDEO, |
| INDEX_VANC, |
| INDEX_HANC, |
| INDEX_IR, |
| }; |
| |
| /*************************************************************************** |
| * configuration information define * |
| ***************************************************************************/ |
| struct CONFIG_INFO { |
| u8 config_index; |
| struct INTERFACE_INFO interface_info; |
| }; |
| |
| struct pcb_config { |
| u8 index; |
| u8 type; /* bus power or self power, |
| self power--0, bus_power--1 */ |
| u8 speed; /* usb speed, 2.0--1, 1.1--0 */ |
| u8 mode; /* digital , anlog, dif or external A/V */ |
| u32 ts1_source; /* three source -- BDA,External,encode */ |
| u32 ts2_source; |
| u32 analog_source; |
| u8 digital_index; /* bus-power used */ |
| u8 analog_index; /* bus-power used */ |
| u8 dif_index; /* bus-power used */ |
| u8 external_index; /* bus-power used */ |
| u8 config_num; /* current config num, 0,1,2, |
| for self-power, always 0 */ |
| struct CONFIG_INFO hs_config_info[3]; |
| struct CONFIG_INFO fs_config_info[3]; |
| }; |
| |
| enum INDEX_PCB_CONFIG{ |
| INDEX_SELFPOWER_DIGITAL_ONLY = 0x0, |
| INDEX_SELFPOWER_DUAL_DIGITAL, |
| INDEX_SELFPOWER_ANALOG_ONLY, |
| INDEX_SELFPOWER_DUAL, |
| INDEX_SELFPOWER_TRIPLE, |
| INDEX_SELFPOWER_COMPRESSOR, |
| INDEX_BUSPOWER_DIGITAL_ONLY, |
| INDEX_BUSPOWER_ANALOG_ONLY, |
| INDEX_BUSPOWER_DIF_ONLY, |
| INDEX_BUSPOWER_EXTERNAL_ONLY, |
| INDEX_BUSPOWER_EXTERNAL_ANALOG, |
| INDEX_BUSPOWER_EXTERNAL_DIF, |
| INDEX_BUSPOWER_EXTERNAL_DIGITAL, |
| INDEX_BUSPOWER_DIGITAL_ANALOG, |
| INDEX_BUSPOWER_DIGITAL_DIF, |
| INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL, |
| INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL, |
| }; |
| |
| /***************************************************************************/ |
| struct cx231xx; |
| |
| u32 initialize_cx231xx(struct cx231xx *p_dev); |
| |
| #endif |
