blob: 21d34720fcc91f4f7f3dab73c44180b0795f167c [file] [log] [blame]
/*
* Manroland mucmc52 board Device Tree Source
*
* Copyright (C) 2009 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
* Copyright 2006-2007 Secret Lab Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "manroland,mucmc52";
compatible = "manroland,mucmc52";
soc5200@f0000000 {
gpt0: timer@600 { // GPT 0 in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
timer@640 {
status = "disabled";
};
timer@650 {
status = "disabled";
};
timer@660 {
status = "disabled";
};
timer@670 {
status = "disabled";
};
rtc@800 {
status = "disabled";
};
can@900 {
status = "disabled";
};
can@980 {
status = "disabled";
};
spi@f00 {
status = "disabled";
};
usb@1000 {
status = "disabled";
};
psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
psc@2400 { // PSC3
status = "disabled";
};
psc@2600 { // PSC4
status = "disabled";
};
psc@2800 { // PSC5
status = "disabled";
};
psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
i2c@3d00 {
status = "disabled";
};
i2c@3d40 {
hwmon@2c {
compatible = "ad,adm9240";
reg = <0x2c>;
};
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
pci@f0000d00 {
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
0x8000 0 0 1 &mpc5200_pic 0 3 3
0x8000 0 0 2 &mpc5200_pic 0 3 3
0x8000 0 0 3 &mpc5200_pic 0 2 3
0x8000 0 0 4 &mpc5200_pic 0 1 3
>;
ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x00800000>;
bank-width = <4>;
device-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
partition@0 {
label = "DTS";
reg = <0x0 0x00100000>;
};
partition@100000 {
label = "Kernel";
reg = <0x100000 0x00200000>;
};
partition@300000 {
label = "RootFS";
reg = <0x00300000 0x00200000>;
};
partition@500000 {
label = "user";
reg = <0x00500000 0x00200000>;
};
partition@700000 {
label = "U-Boot";
reg = <0x00700000 0x00040000>;
};
partition@740000 {
label = "Env";
reg = <0x00740000 0x00020000>;
};
partition@760000 {
label = "red. Env";
reg = <0x00760000 0x00020000>;
};
partition@780000 {
label = "reserve";
reg = <0x00780000 0x00080000>;
};
};
simple100: gpio-controller-100@3,600100 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600100 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple104: gpio-controller-104@3,600104 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600104 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple200: gpio-controller-200@3,600200 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600200 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple201: gpio-controller-201@3,600201 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600201 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple202: gpio-controller-202@3,600202 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600202 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple203: gpio-controller-203@3,600203 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600203 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple204: gpio-controller-204@3,600204 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600204 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple206: gpio-controller-206@3,600206 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600206 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple207: gpio-controller-207@3,600207 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600207 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple20f: gpio-controller-20f@3,60020f {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x0060020f 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
};
};