| /* |
| * MPC8548 CDS Device Tree Source (32-bit address map) |
| * |
| * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "fsl/mpc8548si-pre.dtsi" |
| |
| / { |
| model = "MPC8548CDS"; |
| compatible = "MPC8548CDS", "MPC85xxCDS"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0 0 0x0 0x8000000>; // 128M at 0x0 |
| }; |
| |
| board_lbc: lbc: localbus@e0005000 { |
| reg = <0 0xe0005000 0 0x1000>; |
| |
| ranges = <0x0 0x0 0x0 0xff000000 0x01000000 |
| 0x1 0x0 0x0 0xf8004000 0x00001000>; |
| |
| }; |
| |
| board_soc: soc: soc8548@e0000000 { |
| ranges = <0 0x0 0xe0000000 0x100000>; |
| }; |
| |
| board_pci0: pci0: pci@e0008000 { |
| reg = <0 0xe0008000 0 0x1000>; |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 |
| 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| }; |
| |
| pci1: pci@e0009000 { |
| reg = <0 0xe0009000 0 0x1000>; |
| ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 |
| 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x15 */ |
| 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 |
| 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; |
| }; |
| |
| pci2: pcie@e000a000 { |
| reg = <0 0xe000a000 0 0x1000>; |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; |
| pcie@0 { |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| rio: rapidio@e00c0000 { |
| reg = <0x0 0xe00c0000 0x0 0x20000>; |
| port1 { |
| ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; |
| }; |
| }; |
| }; |
| |
| /* |
| * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings |
| * for interrupt-map & interrupt-map-mask. |
| */ |
| |
| /include/ "fsl/mpc8548si-post.dtsi" |
| /include/ "mpc8548cds.dtsi" |
