arch/powerpc/boot/dts/fsl/p4080si-post.dtsi - maze/linux - Git at Google

 /*
  * P4080/P4040 Silicon/SoC Device Tree Source (post include)
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 &lbc {
 	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
 	interrupts = <25 2 0 0>;
 	#address-cells = <2>;
 	#size-cells = <1>;
 };

 /* controller at 0x200000 */
 &pci0 {
 	compatible = "fsl,p4080-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 1 15>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 1 15>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 40 1 0 0
 			0000 0 0 2 &mpic 1 1 0 0
 			0000 0 0 3 &mpic 2 1 0 0
 			0000 0 0 4 &mpic 3 1 0 0
 			>;
 	};
 };

 /* controller at 0x201000 */
 &pci1 {
 	compatible = "fsl,p4080-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 0xff>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 1 14>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 1 14>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 41 1 0 0
 			0000 0 0 2 &mpic 5 1 0 0
 			0000 0 0 3 &mpic 6 1 0 0
 			0000 0 0 4 &mpic 7 1 0 0
 			>;
 	};
 };

 /* controller at 0x202000 */
 &pci2 {
 	compatible = "fsl,p4080-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 1 13>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 1 13>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 42 1 0 0
 			0000 0 0 2 &mpic 9 1 0 0
 			0000 0 0 3 &mpic 10 1 0 0
 			0000 0 0 4 &mpic 11 1 0 0
 			>;
 	};
 };

 &rio {
 	compatible = "fsl,srio";
 	interrupts = <16 2 1 11>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 	fsl,srio-rmu-handle = <&rmu>;
 	ranges;

 	port1 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <1>;
 	};

 	port2 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <2>;
 	};
 };

 &dcsr {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "fsl,dcsr", "simple-bus";

 	dcsr-epu@0 {
 		compatible = "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
 		reg = <0x0 0x1000>;
 	};
 	dcsr-npc {
 		compatible = "fsl,dcsr-npc";
 		reg = <0x1000 0x1000 0x1000000 0x8000>;
 	};
 	dcsr-nxc@2000 {
 		compatible = "fsl,dcsr-nxc";
 		reg = <0x2000 0x1000>;
 	};
 	dcsr-corenet {
 		compatible = "fsl,dcsr-corenet";
 		reg = <0x8000 0x1000 0xB0000 0x1000>;
 	};
 	dcsr-dpaa@9000 {
 		compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
 		reg = <0x9000 0x1000>;
 	};
 	dcsr-ocn@11000 {
 		compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
 		reg = <0x11000 0x1000>;
 	};
 	dcsr-ddr@12000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr1>;
 		reg = <0x12000 0x1000>;
 	};
 	dcsr-ddr@13000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr2>;
 		reg = <0x13000 0x1000>;
 	};
 	dcsr-nal@18000 {
 		compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
 		reg = <0x18000 0x1000>;
 	};
 	dcsr-rcpm@22000 {
 		compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
 		reg = <0x22000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@40000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu0>;
 		reg = <0x40000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@41000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu1>;
 		reg = <0x41000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@42000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu2>;
 		reg = <0x42000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@43000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu3>;
 		reg = <0x43000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@44000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu4>;
 		reg = <0x44000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@45000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu5>;
 		reg = <0x45000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@46000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu6>;
 		reg = <0x46000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@47000 {
 		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu7>;
 		reg = <0x47000 0x1000>;
 	};

 };

 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	device_type = "soc";
 	compatible = "simple-bus";

 	soc-sram-error {
 		compatible = "fsl,soc-sram-error";
 		interrupts = <16 2 1 29>;
 	};

 	corenet-law@0 {
 		compatible = "fsl,corenet-law";
 		reg = <0x0 0x1000>;
 		fsl,num-laws = <32>;
 	};

 	ddr1: memory-controller@8000 {
 		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 		reg = <0x8000 0x1000>;
 		interrupts = <16 2 1 23>;
 	};

 	ddr2: memory-controller@9000 {
 		compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
 		reg = <0x9000 0x1000>;
 		interrupts = <16 2 1 22>;
 	};

 	cpc: l3-cache-controller@10000 {
 		compatible = "fsl,p4080-l3-cache-controller", "cache";
 		reg = <0x10000 0x1000
 		       0x11000 0x1000>;
 		interrupts = <16 2 1 27
 			      16 2 1 26>;
 	};

 	corenet-cf@18000 {
 		compatible = "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
 		fsl,ccf-num-snoopids = <32>;
 	};

 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x5000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
 	};

 /include/ "qoriq-rmu-0.dtsi"
 /include/ "qoriq-mpic.dtsi"

 	guts: global-utilities@e0000 {
 		compatible = "fsl,qoriq-device-config-1.0";
 		reg = <0xe0000 0xe00>;
 		fsl,has-rstcr;
 		#sleep-cells = <1>;
 		fsl,liodn-bits = <12>;
 	};

 	pins: global-utilities@e0e00 {
 		compatible = "fsl,qoriq-pin-control-1.0";
 		reg = <0xe0e00 0x200>;
 		#sleep-cells = <2>;
 	};

 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
 		reg = <0xe1000 0x1000>;
 		clock-frequency = <0>;
 	};

 	rcpm: global-utilities@e2000 {
 		compatible = "fsl,qoriq-rcpm-1.0";
 		reg = <0xe2000 0x1000>;
 		#sleep-cells = <1>;
 	};

 	sfp: sfp@e8000 {
 		compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
 		reg	   = <0xe8000 0x1000>;
 	};

 	serdes: serdes@ea000 {
 		compatible = "fsl,p4080-serdes";
 		reg	   = <0xea000 0x1000>;
 	};

 /include/ "qoriq-dma-0.dtsi"
 /include/ "qoriq-dma-1.dtsi"
 /include/ "qoriq-espi-0.dtsi"
 	spi@110000 {
 		fsl,espi-num-chipselects = <4>;
 	};

 /include/ "qoriq-esdhc-0.dtsi"
 	sdhc@114000 {
 		voltage-ranges = <3300 3300>;
 		sdhci,auto-cmd12;
 	};

 /include/ "qoriq-i2c-0.dtsi"
 /include/ "qoriq-i2c-1.dtsi"
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 /include/ "qoriq-usb2-dr-0.dtsi"
 /include/ "qoriq-sec4.0-0.dtsi"
 };
	/*
	* P4080/P4040 Silicon/SoC Device Tree Source (post include)
	*
	* Copyright 2011 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	&lbc {
	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
	interrupts = <25 2 0 0>;
	#address-cells = <2>;
	#size-cells = <1>;
	};

	/* controller at 0x200000 */
	&pci0 {
	compatible = "fsl,p4080-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 15>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 1 15>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 40 1 0 0
	0000 0 0 2 &mpic 1 1 0 0
	0000 0 0 3 &mpic 2 1 0 0
	0000 0 0 4 &mpic 3 1 0 0
	>;
	};
	};

	/* controller at 0x201000 */
	&pci1 {
	compatible = "fsl,p4080-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 14>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 1 14>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 41 1 0 0
	0000 0 0 2 &mpic 5 1 0 0
	0000 0 0 3 &mpic 6 1 0 0
	0000 0 0 4 &mpic 7 1 0 0
	>;
	};
	};

	/* controller at 0x202000 */
	&pci2 {
	compatible = "fsl,p4080-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 13>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 1 13>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 42 1 0 0
	0000 0 0 2 &mpic 9 1 0 0
	0000 0 0 3 &mpic 10 1 0 0
	0000 0 0 4 &mpic 11 1 0 0
	>;
	};
	};

	&rio {
	compatible = "fsl,srio";
	interrupts = <16 2 1 11>;
	#address-cells = <2>;
	#size-cells = <2>;
	fsl,srio-rmu-handle = <&rmu>;
	ranges;

	port1 {
	#address-cells = <2>;
	#size-cells = <2>;
	cell-index = <1>;
	};

	port2 {
	#address-cells = <2>;
	#size-cells = <2>;
	cell-index = <2>;
	};
	};

	&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
	compatible = "fsl,dcsr-epu";
	interrupts = <52 2 0 0
	84 2 0 0
	85 2 0 0>;
	reg = <0x0 0x1000>;
	};
	dcsr-npc {
	compatible = "fsl,dcsr-npc";
	reg = <0x1000 0x1000 0x1000000 0x8000>;
	};
	dcsr-nxc@2000 {
	compatible = "fsl,dcsr-nxc";
	reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
	compatible = "fsl,dcsr-corenet";
	reg = <0x8000 0x1000 0xB0000 0x1000>;
	};
	dcsr-dpaa@9000 {
	compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
	reg = <0x9000 0x1000>;
	};
	dcsr-ocn@11000 {
	compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
	reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr1>;
	reg = <0x12000 0x1000>;
	};
	dcsr-ddr@13000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr2>;
	reg = <0x13000 0x1000>;
	};
	dcsr-nal@18000 {
	compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
	reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
	compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
	reg = <0x22000 0x1000>;
	};
	dcsr-cpu-sb-proxy@40000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu0>;
	reg = <0x40000 0x1000>;
	};
	dcsr-cpu-sb-proxy@41000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu1>;
	reg = <0x41000 0x1000>;
	};
	dcsr-cpu-sb-proxy@42000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu2>;
	reg = <0x42000 0x1000>;
	};
	dcsr-cpu-sb-proxy@43000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu3>;
	reg = <0x43000 0x1000>;
	};
	dcsr-cpu-sb-proxy@44000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu4>;
	reg = <0x44000 0x1000>;
	};
	dcsr-cpu-sb-proxy@45000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu5>;
	reg = <0x45000 0x1000>;
	};
	dcsr-cpu-sb-proxy@46000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu6>;
	reg = <0x46000 0x1000>;
	};
	dcsr-cpu-sb-proxy@47000 {
	compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu7>;
	reg = <0x47000 0x1000>;
	};

	};

	&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
	compatible = "fsl,soc-sram-error";
	interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
	compatible = "fsl,corenet-law";
	reg = <0x0 0x1000>;
	fsl,num-laws = <32>;
	};

	ddr1: memory-controller@8000 {
	compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
	reg = <0x8000 0x1000>;
	interrupts = <16 2 1 23>;
	};

	ddr2: memory-controller@9000 {
	compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
	reg = <0x9000 0x1000>;
	interrupts = <16 2 1 22>;
	};

	cpc: l3-cache-controller@10000 {
	compatible = "fsl,p4080-l3-cache-controller", "cache";
	reg = <0x10000 0x1000
	0x11000 0x1000>;
	interrupts = <16 2 1 27
	16 2 1 26>;
	};

	corenet-cf@18000 {
	compatible = "fsl,corenet-cf";
	reg = <0x18000 0x1000>;
	interrupts = <16 2 1 31>;
	fsl,ccf-num-csdids = <32>;
	fsl,ccf-num-snoopids = <32>;
	};

	iommu@20000 {
	compatible = "fsl,pamu-v1.0", "fsl,pamu";
	reg = <0x20000 0x5000>;
	interrupts = <
	24 2 0 0
	16 2 1 30>;
	};

	/include/ "qoriq-rmu-0.dtsi"
	/include/ "qoriq-mpic.dtsi"

	guts: global-utilities@e0000 {
	compatible = "fsl,qoriq-device-config-1.0";
	reg = <0xe0000 0xe00>;
	fsl,has-rstcr;
	#sleep-cells = <1>;
	fsl,liodn-bits = <12>;
	};

	pins: global-utilities@e0e00 {
	compatible = "fsl,qoriq-pin-control-1.0";
	reg = <0xe0e00 0x200>;
	#sleep-cells = <2>;
	};

	clockgen: global-utilities@e1000 {
	compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
	reg = <0xe1000 0x1000>;
	clock-frequency = <0>;
	};

	rcpm: global-utilities@e2000 {
	compatible = "fsl,qoriq-rcpm-1.0";
	reg = <0xe2000 0x1000>;
	#sleep-cells = <1>;
	};

	sfp: sfp@e8000 {
	compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
	reg = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
	compatible = "fsl,p4080-serdes";
	reg = <0xea000 0x1000>;
	};

	/include/ "qoriq-dma-0.dtsi"
	/include/ "qoriq-dma-1.dtsi"
	/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
	fsl,espi-num-chipselects = <4>;
	};

	/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
	voltage-ranges = <3300 3300>;
	sdhci,auto-cmd12;
	};

	/include/ "qoriq-i2c-0.dtsi"
	/include/ "qoriq-i2c-1.dtsi"
	/include/ "qoriq-duart-0.dtsi"
	/include/ "qoriq-duart-1.dtsi"
	/include/ "qoriq-gpio-0.dtsi"
	/include/ "qoriq-usb2-mph-0.dtsi"
	/include/ "qoriq-usb2-dr-0.dtsi"
	/include/ "qoriq-sec4.0-0.dtsi"
	};