| /* |
| * Copyright 2001, 2007-2008 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. <source@mvista.com> |
| * |
| * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/syscore_ops.h> |
| |
| #include <asm/irq_cpu.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #include <asm/mach-au1x00/gpio-au1300.h> |
| |
| /* Interrupt Controller register offsets */ |
| #define IC_CFG0RD 0x40 |
| #define IC_CFG0SET 0x40 |
| #define IC_CFG0CLR 0x44 |
| #define IC_CFG1RD 0x48 |
| #define IC_CFG1SET 0x48 |
| #define IC_CFG1CLR 0x4C |
| #define IC_CFG2RD 0x50 |
| #define IC_CFG2SET 0x50 |
| #define IC_CFG2CLR 0x54 |
| #define IC_REQ0INT 0x54 |
| #define IC_SRCRD 0x58 |
| #define IC_SRCSET 0x58 |
| #define IC_SRCCLR 0x5C |
| #define IC_REQ1INT 0x5C |
| #define IC_ASSIGNRD 0x60 |
| #define IC_ASSIGNSET 0x60 |
| #define IC_ASSIGNCLR 0x64 |
| #define IC_WAKERD 0x68 |
| #define IC_WAKESET 0x68 |
| #define IC_WAKECLR 0x6C |
| #define IC_MASKRD 0x70 |
| #define IC_MASKSET 0x70 |
| #define IC_MASKCLR 0x74 |
| #define IC_RISINGRD 0x78 |
| #define IC_RISINGCLR 0x78 |
| #define IC_FALLINGRD 0x7C |
| #define IC_FALLINGCLR 0x7C |
| #define IC_TESTBIT 0x80 |
| |
| /* per-processor fixed function irqs */ |
| struct alchemy_irqmap { |
| int irq; /* linux IRQ number */ |
| int type; /* IRQ_TYPE_ */ |
| int prio; /* irq priority, 0 highest, 3 lowest */ |
| int internal; /* GPIC: internal source (no ext. pin)? */ |
| }; |
| |
| static int au1x_ic_settype(struct irq_data *d, unsigned int type); |
| static int au1300_gpic_settype(struct irq_data *d, unsigned int type); |
| |
| |
| /* NOTE on interrupt priorities: The original writers of this code said: |
| * |
| * Because of the tight timing of SETUP token to reply transactions, |
| * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) |
| * needs the highest priority. |
| */ |
| struct alchemy_irqmap au1000_irqmap[] __initdata = { |
| { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, |
| { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, |
| { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { -1, }, |
| }; |
| |
| struct alchemy_irqmap au1500_irqmap[] __initdata = { |
| { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, |
| { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, |
| { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { -1, }, |
| }; |
| |
| struct alchemy_irqmap au1100_irqmap[] __initdata = { |
| { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, |
| { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, |
| { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { -1, }, |
| }; |
| |
| struct alchemy_irqmap au1550_irqmap[] __initdata = { |
| { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, |
| { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, |
| { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, |
| { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { -1, }, |
| }; |
| |
| struct alchemy_irqmap au1200_irqmap[] __initdata = { |
| { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, |
| { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, |
| { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, |
| { -1, }, |
| }; |
| |
| static struct alchemy_irqmap au1300_irqmap[] __initdata = { |
| /* multifunction: gpio pin or device */ |
| { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, |
| /* au1300 internal */ |
| { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, |
| { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, |
| { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, |
| { -1, }, /* terminator */ |
| }; |
| |
| /******************************************************************************/ |
| |
| static void au1x_ic0_unmask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_MASKSET); |
| __raw_writel(1 << bit, base + IC_WAKESET); |
| wmb(); |
| } |
| |
| static void au1x_ic1_unmask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_MASKSET); |
| __raw_writel(1 << bit, base + IC_WAKESET); |
| wmb(); |
| } |
| |
| static void au1x_ic0_mask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_MASKCLR); |
| __raw_writel(1 << bit, base + IC_WAKECLR); |
| wmb(); |
| } |
| |
| static void au1x_ic1_mask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_MASKCLR); |
| __raw_writel(1 << bit, base + IC_WAKECLR); |
| wmb(); |
| } |
| |
| static void au1x_ic0_ack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| |
| /* |
| * This may assume that we don't get interrupts from |
| * both edges at once, or if we do, that we don't care. |
| */ |
| __raw_writel(1 << bit, base + IC_FALLINGCLR); |
| __raw_writel(1 << bit, base + IC_RISINGCLR); |
| wmb(); |
| } |
| |
| static void au1x_ic1_ack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| |
| /* |
| * This may assume that we don't get interrupts from |
| * both edges at once, or if we do, that we don't care. |
| */ |
| __raw_writel(1 << bit, base + IC_FALLINGCLR); |
| __raw_writel(1 << bit, base + IC_RISINGCLR); |
| wmb(); |
| } |
| |
| static void au1x_ic0_maskack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_WAKECLR); |
| __raw_writel(1 << bit, base + IC_MASKCLR); |
| __raw_writel(1 << bit, base + IC_RISINGCLR); |
| __raw_writel(1 << bit, base + IC_FALLINGCLR); |
| wmb(); |
| } |
| |
| static void au1x_ic1_maskack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| |
| __raw_writel(1 << bit, base + IC_WAKECLR); |
| __raw_writel(1 << bit, base + IC_MASKCLR); |
| __raw_writel(1 << bit, base + IC_RISINGCLR); |
| __raw_writel(1 << bit, base + IC_FALLINGCLR); |
| wmb(); |
| } |
| |
| static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) |
| { |
| int bit = d->irq - AU1000_INTC1_INT_BASE; |
| unsigned long wakemsk, flags; |
| |
| /* only GPIO 0-7 can act as wakeup source. Fortunately these |
| * are wired up identically on all supported variants. |
| */ |
| if ((bit < 0) || (bit > 7)) |
| return -EINVAL; |
| |
| local_irq_save(flags); |
| wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); |
| if (on) |
| wakemsk |= 1 << bit; |
| else |
| wakemsk &= ~(1 << bit); |
| __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); |
| wmb(); |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| /* |
| * irq_chips for both ICs; this way the mask handlers can be |
| * as short as possible. |
| */ |
| static struct irq_chip au1x_ic0_chip = { |
| .name = "Alchemy-IC0", |
| .irq_ack = au1x_ic0_ack, |
| .irq_mask = au1x_ic0_mask, |
| .irq_mask_ack = au1x_ic0_maskack, |
| .irq_unmask = au1x_ic0_unmask, |
| .irq_set_type = au1x_ic_settype, |
| }; |
| |
| static struct irq_chip au1x_ic1_chip = { |
| .name = "Alchemy-IC1", |
| .irq_ack = au1x_ic1_ack, |
| .irq_mask = au1x_ic1_mask, |
| .irq_mask_ack = au1x_ic1_maskack, |
| .irq_unmask = au1x_ic1_unmask, |
| .irq_set_type = au1x_ic_settype, |
| .irq_set_wake = au1x_ic1_setwake, |
| }; |
| |
| static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) |
| { |
| struct irq_chip *chip; |
| unsigned int bit, irq = d->irq; |
| irq_flow_handler_t handler = NULL; |
| unsigned char *name = NULL; |
| void __iomem *base; |
| int ret; |
| |
| if (irq >= AU1000_INTC1_INT_BASE) { |
| bit = irq - AU1000_INTC1_INT_BASE; |
| chip = &au1x_ic1_chip; |
| base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| } else { |
| bit = irq - AU1000_INTC0_INT_BASE; |
| chip = &au1x_ic0_chip; |
| base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| } |
| |
| if (bit > 31) |
| return -EINVAL; |
| |
| ret = 0; |
| |
| switch (flow_type) { /* cfgregs 2:1:0 */ |
| case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ |
| __raw_writel(1 << bit, base + IC_CFG2CLR); |
| __raw_writel(1 << bit, base + IC_CFG1CLR); |
| __raw_writel(1 << bit, base + IC_CFG0SET); |
| handler = handle_edge_irq; |
| name = "riseedge"; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ |
| __raw_writel(1 << bit, base + IC_CFG2CLR); |
| __raw_writel(1 << bit, base + IC_CFG1SET); |
| __raw_writel(1 << bit, base + IC_CFG0CLR); |
| handler = handle_edge_irq; |
| name = "falledge"; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ |
| __raw_writel(1 << bit, base + IC_CFG2CLR); |
| __raw_writel(1 << bit, base + IC_CFG1SET); |
| __raw_writel(1 << bit, base + IC_CFG0SET); |
| handler = handle_edge_irq; |
| name = "bothedge"; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ |
| __raw_writel(1 << bit, base + IC_CFG2SET); |
| __raw_writel(1 << bit, base + IC_CFG1CLR); |
| __raw_writel(1 << bit, base + IC_CFG0SET); |
| handler = handle_level_irq; |
| name = "hilevel"; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ |
| __raw_writel(1 << bit, base + IC_CFG2SET); |
| __raw_writel(1 << bit, base + IC_CFG1SET); |
| __raw_writel(1 << bit, base + IC_CFG0CLR); |
| handler = handle_level_irq; |
| name = "lowlevel"; |
| break; |
| case IRQ_TYPE_NONE: /* 0:0:0 */ |
| __raw_writel(1 << bit, base + IC_CFG2CLR); |
| __raw_writel(1 << bit, base + IC_CFG1CLR); |
| __raw_writel(1 << bit, base + IC_CFG0CLR); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); |
| |
| wmb(); |
| |
| return ret; |
| } |
| |
| /******************************************************************************/ |
| |
| /* |
| * au1300_gpic_chgcfg - change PIN configuration. |
| * @gpio: pin to change (0-based GPIO number from datasheet). |
| * @clr: clear all bits set in 'clr'. |
| * @set: set these bits. |
| * |
| * modifies a pins' configuration register, bits set in @clr will |
| * be cleared in the register, bits in @set will be set. |
| */ |
| static inline void au1300_gpic_chgcfg(unsigned int gpio, |
| unsigned long clr, |
| unsigned long set) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long l; |
| |
| r += gpio * 4; /* offset into pin config array */ |
| l = __raw_readl(r + AU1300_GPIC_PINCFG); |
| l &= ~clr; |
| l |= set; |
| __raw_writel(l, r + AU1300_GPIC_PINCFG); |
| wmb(); |
| } |
| |
| /* |
| * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). |
| * @pin: pin (0-based GPIO number from datasheet). |
| * |
| * Assigns a GPIO pin to the GPIO controller, so its level can either |
| * be read or set through the generic GPIO functions. |
| * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). |
| * REVISIT: is this function really necessary? |
| */ |
| void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) |
| { |
| au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); |
| } |
| EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); |
| |
| /* |
| * au1300_pinfunc_to_dev - assign a pin to the device function. |
| * @pin: pin (0-based GPIO number from datasheet). |
| * |
| * Assigns a GPIO pin to its associated device function; the pin will be |
| * driven by the device and not through GPIO functions. |
| */ |
| void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long bit; |
| |
| r += GPIC_GPIO_BANKOFF(gpio); |
| bit = GPIC_GPIO_TO_BIT(gpio); |
| __raw_writel(bit, r + AU1300_GPIC_DEVSEL); |
| wmb(); |
| } |
| EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); |
| |
| /* |
| * au1300_set_irq_priority - set internal priority of IRQ. |
| * @irq: irq to set priority (linux irq number). |
| * @p: priority (0 = highest, 3 = lowest). |
| */ |
| void au1300_set_irq_priority(unsigned int irq, int p) |
| { |
| irq -= ALCHEMY_GPIC_INT_BASE; |
| au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); |
| } |
| EXPORT_SYMBOL_GPL(au1300_set_irq_priority); |
| |
| /* |
| * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. |
| * @dchan: dbdma trigger select (0, 1). |
| * @gpio: pin to assign as trigger. |
| * |
| * DBDMA controller has 2 external trigger sources; this function |
| * assigns a GPIO to the selected trigger. |
| */ |
| void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) |
| { |
| unsigned long r; |
| |
| if ((dchan >= 0) && (dchan <= 1)) { |
| r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); |
| r &= ~(0xff << (8 * dchan)); |
| r |= (gpio & 0x7f) << (8 * dchan); |
| __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); |
| wmb(); |
| } |
| } |
| |
| static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) |
| { |
| au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, |
| allow ? GPIC_CFG_IDLEWAKE : 0); |
| } |
| |
| static void au1300_gpic_mask(struct irq_data *d) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long bit, irq = d->irq; |
| |
| irq -= ALCHEMY_GPIC_INT_BASE; |
| r += GPIC_GPIO_BANKOFF(irq); |
| bit = GPIC_GPIO_TO_BIT(irq); |
| __raw_writel(bit, r + AU1300_GPIC_IDIS); |
| wmb(); |
| |
| gpic_pin_set_idlewake(irq, 0); |
| } |
| |
| static void au1300_gpic_unmask(struct irq_data *d) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long bit, irq = d->irq; |
| |
| irq -= ALCHEMY_GPIC_INT_BASE; |
| |
| gpic_pin_set_idlewake(irq, 1); |
| |
| r += GPIC_GPIO_BANKOFF(irq); |
| bit = GPIC_GPIO_TO_BIT(irq); |
| __raw_writel(bit, r + AU1300_GPIC_IEN); |
| wmb(); |
| } |
| |
| static void au1300_gpic_maskack(struct irq_data *d) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long bit, irq = d->irq; |
| |
| irq -= ALCHEMY_GPIC_INT_BASE; |
| r += GPIC_GPIO_BANKOFF(irq); |
| bit = GPIC_GPIO_TO_BIT(irq); |
| __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ |
| __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ |
| wmb(); |
| |
| gpic_pin_set_idlewake(irq, 0); |
| } |
| |
| static void au1300_gpic_ack(struct irq_data *d) |
| { |
| void __iomem *r = AU1300_GPIC_ADDR; |
| unsigned long bit, irq = d->irq; |
| |
| irq -= ALCHEMY_GPIC_INT_BASE; |
| r += GPIC_GPIO_BANKOFF(irq); |
| bit = GPIC_GPIO_TO_BIT(irq); |
| __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ |
| wmb(); |
| } |
| |
| static struct irq_chip au1300_gpic = { |
| .name = "GPIOINT", |
| .irq_ack = au1300_gpic_ack, |
| .irq_mask = au1300_gpic_mask, |
| .irq_mask_ack = au1300_gpic_maskack, |
| .irq_unmask = au1300_gpic_unmask, |
| .irq_set_type = au1300_gpic_settype, |
| }; |
| |
| static int au1300_gpic_settype(struct irq_data *d, unsigned int type) |
| { |
| unsigned long s; |
| unsigned char *name = NULL; |
| irq_flow_handler_t hdl = NULL; |
| |
| switch (type) { |
| case IRQ_TYPE_LEVEL_HIGH: |
| s = GPIC_CFG_IC_LEVEL_HIGH; |
| name = "high"; |
| hdl = handle_level_irq; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| s = GPIC_CFG_IC_LEVEL_LOW; |
| name = "low"; |
| hdl = handle_level_irq; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| s = GPIC_CFG_IC_EDGE_RISE; |
| name = "posedge"; |
| hdl = handle_edge_irq; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| s = GPIC_CFG_IC_EDGE_FALL; |
| name = "negedge"; |
| hdl = handle_edge_irq; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| s = GPIC_CFG_IC_EDGE_BOTH; |
| name = "bothedge"; |
| hdl = handle_edge_irq; |
| break; |
| case IRQ_TYPE_NONE: |
| s = GPIC_CFG_IC_OFF; |
| name = "disabled"; |
| hdl = handle_level_irq; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| __irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name); |
| |
| au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); |
| |
| return 0; |
| } |
| |
| /******************************************************************************/ |
| |
| static inline void ic_init(void __iomem *base) |
| { |
| /* initialize interrupt controller to a safe state */ |
| __raw_writel(0xffffffff, base + IC_CFG0CLR); |
| __raw_writel(0xffffffff, base + IC_CFG1CLR); |
| __raw_writel(0xffffffff, base + IC_CFG2CLR); |
| __raw_writel(0xffffffff, base + IC_MASKCLR); |
| __raw_writel(0xffffffff, base + IC_ASSIGNCLR); |
| __raw_writel(0xffffffff, base + IC_WAKECLR); |
| __raw_writel(0xffffffff, base + IC_SRCSET); |
| __raw_writel(0xffffffff, base + IC_FALLINGCLR); |
| __raw_writel(0xffffffff, base + IC_RISINGCLR); |
| __raw_writel(0x00000000, base + IC_TESTBIT); |
| wmb(); |
| } |
| |
| static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; |
| |
| static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) |
| { |
| d[0] = __raw_readl(base + IC_CFG0RD); |
| d[1] = __raw_readl(base + IC_CFG1RD); |
| d[2] = __raw_readl(base + IC_CFG2RD); |
| d[3] = __raw_readl(base + IC_SRCRD); |
| d[4] = __raw_readl(base + IC_ASSIGNRD); |
| d[5] = __raw_readl(base + IC_WAKERD); |
| d[6] = __raw_readl(base + IC_MASKRD); |
| ic_init(base); /* shut it up too while at it */ |
| } |
| |
| static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) |
| { |
| ic_init(base); |
| |
| __raw_writel(d[0], base + IC_CFG0SET); |
| __raw_writel(d[1], base + IC_CFG1SET); |
| __raw_writel(d[2], base + IC_CFG2SET); |
| __raw_writel(d[3], base + IC_SRCSET); |
| __raw_writel(d[4], base + IC_ASSIGNSET); |
| __raw_writel(d[5], base + IC_WAKESET); |
| wmb(); |
| |
| __raw_writel(d[6], base + IC_MASKSET); |
| wmb(); |
| } |
| |
| static int alchemy_ic_suspend(void) |
| { |
| alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), |
| alchemy_gpic_pmdata); |
| alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), |
| &alchemy_gpic_pmdata[7]); |
| return 0; |
| } |
| |
| static void alchemy_ic_resume(void) |
| { |
| alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), |
| &alchemy_gpic_pmdata[7]); |
| alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), |
| alchemy_gpic_pmdata); |
| } |
| |
| static int alchemy_gpic_suspend(void) |
| { |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); |
| int i; |
| |
| /* save 4 interrupt mask status registers */ |
| alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); |
| alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); |
| alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); |
| alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); |
| |
| /* save misc register(s) */ |
| alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); |
| |
| /* molto silenzioso */ |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); |
| wmb(); |
| |
| /* save pin/int-type configuration */ |
| base += AU1300_GPIC_PINCFG; |
| for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) |
| alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); |
| |
| wmb(); |
| |
| return 0; |
| } |
| |
| static void alchemy_gpic_resume(void) |
| { |
| void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); |
| int i; |
| |
| /* disable all first */ |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); |
| __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); |
| wmb(); |
| |
| /* restore pin/int-type configurations */ |
| base += AU1300_GPIC_PINCFG; |
| for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) |
| __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); |
| wmb(); |
| |
| /* restore misc register(s) */ |
| base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); |
| __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); |
| wmb(); |
| |
| /* finally restore masks */ |
| __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); |
| __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); |
| __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); |
| __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); |
| wmb(); |
| } |
| |
| static struct syscore_ops alchemy_ic_pmops = { |
| .suspend = alchemy_ic_suspend, |
| .resume = alchemy_ic_resume, |
| }; |
| |
| static struct syscore_ops alchemy_gpic_pmops = { |
| .suspend = alchemy_gpic_suspend, |
| .resume = alchemy_gpic_resume, |
| }; |
| |
| /******************************************************************************/ |
| |
| /* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ |
| #define DISP(name, base, addr) \ |
| static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d) \ |
| { \ |
| unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ |
| if (likely(r)) \ |
| generic_handle_irq(base + __ffs(r)); \ |
| else \ |
| spurious_interrupt(); \ |
| } |
| |
| DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) |
| DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) |
| DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) |
| DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) |
| |
| static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d) |
| { |
| int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); |
| generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); |
| } |
| |
| /******************************************************************************/ |
| |
| static void __init au1000_init_irq(struct alchemy_irqmap *map) |
| { |
| unsigned int bit, irq_nr; |
| void __iomem *base; |
| |
| ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); |
| ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); |
| register_syscore_ops(&alchemy_ic_pmops); |
| mips_cpu_irq_init(); |
| |
| /* register all 64 possible IC0+IC1 irq sources as type "none". |
| * Use set_irq_type() to set edge/level behaviour at runtime. |
| */ |
| for (irq_nr = AU1000_INTC0_INT_BASE; |
| (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) |
| au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); |
| |
| for (irq_nr = AU1000_INTC1_INT_BASE; |
| (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) |
| au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); |
| |
| /* |
| * Initialize IC0, which is fixed per processor. |
| */ |
| while (map->irq != -1) { |
| irq_nr = map->irq; |
| |
| if (irq_nr >= AU1000_INTC1_INT_BASE) { |
| bit = irq_nr - AU1000_INTC1_INT_BASE; |
| base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); |
| } else { |
| bit = irq_nr - AU1000_INTC0_INT_BASE; |
| base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); |
| } |
| if (map->prio == 0) |
| __raw_writel(1 << bit, base + IC_ASSIGNSET); |
| |
| au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); |
| ++map; |
| } |
| |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); |
| } |
| |
| static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) |
| { |
| int i; |
| void __iomem *bank_base; |
| |
| register_syscore_ops(&alchemy_gpic_pmops); |
| mips_cpu_irq_init(); |
| |
| /* disable & ack all possible interrupt sources */ |
| for (i = 0; i < 4; i++) { |
| bank_base = AU1300_GPIC_ADDR + (i * 4); |
| __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); |
| wmb(); |
| __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); |
| wmb(); |
| } |
| |
| /* register an irq_chip for them, with 2nd highest priority */ |
| for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { |
| au1300_set_irq_priority(i, 1); |
| au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); |
| } |
| |
| /* setup known on-chip sources */ |
| while ((i = dints->irq) != -1) { |
| au1300_gpic_settype(irq_get_irq_data(i), dints->type); |
| au1300_set_irq_priority(i, dints->prio); |
| |
| if (dints->internal) |
| au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); |
| |
| dints++; |
| } |
| |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); |
| irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); |
| } |
| |
| /******************************************************************************/ |
| |
| void __init arch_init_irq(void) |
| { |
| switch (alchemy_get_cputype()) { |
| case ALCHEMY_CPU_AU1000: |
| au1000_init_irq(au1000_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1500: |
| au1000_init_irq(au1500_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1100: |
| au1000_init_irq(au1100_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1550: |
| au1000_init_irq(au1550_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1200: |
| au1000_init_irq(au1200_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1300: |
| alchemy_gpic_init_irq(au1300_irqmap); |
| break; |
| default: |
| pr_err("unknown Alchemy IRQ core\n"); |
| break; |
| } |
| } |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; |
| do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); |
| } |