| /* linux/arch/arm/mach-msm/board-trout-mmc.c |
| ** Author: Brian Swetland <swetland@google.com> |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/err.h> |
| #include <linux/debugfs.h> |
| |
| #include <asm/io.h> |
| |
| #include <mach/vreg.h> |
| |
| #include <mach/mmc.h> |
| |
| #include "devices.h" |
| |
| #include "board-trout.h" |
| |
| #include "proc_comm.h" |
| |
| #define DEBUG_SDSLOT_VDD 1 |
| |
| /* ---- COMMON ---- */ |
| static void config_gpio_table(uint32_t *table, int len) |
| { |
| int n; |
| unsigned id; |
| for(n = 0; n < len; n++) { |
| id = table[n]; |
| msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0); |
| } |
| } |
| |
| /* ---- SDCARD ---- */ |
| |
| static uint32_t sdcard_on_gpio_table[] = { |
| PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */ |
| PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */ |
| PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */ |
| PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */ |
| PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */ |
| PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */ |
| }; |
| |
| static uint32_t sdcard_off_gpio_table[] = { |
| PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */ |
| PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */ |
| PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */ |
| PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */ |
| PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */ |
| PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */ |
| }; |
| |
| static uint opt_disable_sdcard; |
| |
| static int __init trout_disablesdcard_setup(char *str) |
| { |
| int cal = simple_strtol(str, NULL, 0); |
| |
| opt_disable_sdcard = cal; |
| return 1; |
| } |
| |
| __setup("board_trout.disable_sdcard=", trout_disablesdcard_setup); |
| |
| static struct vreg *vreg_sdslot; /* SD slot power */ |
| |
| struct mmc_vdd_xlat { |
| int mask; |
| int level; |
| }; |
| |
| static struct mmc_vdd_xlat mmc_vdd_table[] = { |
| { MMC_VDD_165_195, 1800 }, |
| { MMC_VDD_20_21, 2050 }, |
| { MMC_VDD_21_22, 2150 }, |
| { MMC_VDD_22_23, 2250 }, |
| { MMC_VDD_23_24, 2350 }, |
| { MMC_VDD_24_25, 2450 }, |
| { MMC_VDD_25_26, 2550 }, |
| { MMC_VDD_26_27, 2650 }, |
| { MMC_VDD_27_28, 2750 }, |
| { MMC_VDD_28_29, 2850 }, |
| { MMC_VDD_29_30, 2950 }, |
| }; |
| |
| static unsigned int sdslot_vdd = 0xffffffff; |
| static unsigned int sdslot_vreg_enabled; |
| |
| static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd) |
| { |
| int i, rc; |
| |
| BUG_ON(!vreg_sdslot); |
| |
| if (vdd == sdslot_vdd) |
| return 0; |
| |
| sdslot_vdd = vdd; |
| |
| if (vdd == 0) { |
| #if DEBUG_SDSLOT_VDD |
| printk("%s: Disabling SD slot power\n", __func__); |
| #endif |
| config_gpio_table(sdcard_off_gpio_table, |
| ARRAY_SIZE(sdcard_off_gpio_table)); |
| vreg_disable(vreg_sdslot); |
| sdslot_vreg_enabled = 0; |
| return 0; |
| } |
| |
| if (!sdslot_vreg_enabled) { |
| rc = vreg_enable(vreg_sdslot); |
| if (rc) { |
| printk(KERN_ERR "%s: Error enabling vreg (%d)\n", |
| __func__, rc); |
| } |
| config_gpio_table(sdcard_on_gpio_table, |
| ARRAY_SIZE(sdcard_on_gpio_table)); |
| sdslot_vreg_enabled = 1; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) { |
| if (mmc_vdd_table[i].mask == (1 << vdd)) { |
| #if DEBUG_SDSLOT_VDD |
| printk("%s: Setting level to %u\n", |
| __func__, mmc_vdd_table[i].level); |
| #endif |
| rc = vreg_set_level(vreg_sdslot, |
| mmc_vdd_table[i].level); |
| if (rc) { |
| printk(KERN_ERR |
| "%s: Error setting vreg level (%d)\n", |
| __func__, rc); |
| } |
| return 0; |
| } |
| } |
| |
| printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd); |
| return 0; |
| } |
| |
| static unsigned int trout_sdslot_status(struct device *dev) |
| { |
| unsigned int status; |
| |
| status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N); |
| return (!status); |
| } |
| |
| #define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \ |
| | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \ |
| | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \ |
| | MMC_VDD_28_29 | MMC_VDD_29_30 |
| |
| static struct msm_mmc_platform_data trout_sdslot_data = { |
| .ocr_mask = TROUT_MMC_VDD, |
| .status = trout_sdslot_status, |
| .translate_vdd = trout_sdslot_switchvdd, |
| }; |
| |
| int __init trout_init_mmc(unsigned int sys_rev) |
| { |
| sdslot_vreg_enabled = 0; |
| |
| vreg_sdslot = vreg_get(0, "gp6"); |
| if (IS_ERR(vreg_sdslot)) |
| return PTR_ERR(vreg_sdslot); |
| |
| irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1); |
| |
| if (!opt_disable_sdcard) |
| msm_add_sdcc(2, &trout_sdslot_data, |
| TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0); |
| else |
| printk(KERN_INFO "trout: SD-Card interface disabled\n"); |
| return 0; |
| } |
| |