| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| }; |
| |
| tzic: tz-interrupt-controller@e0000000 { |
| compatible = "fsl,imx51-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xe0000000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| clock-frequency = <22579200>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| aips@70000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x10000000>; |
| ranges; |
| |
| spba@70000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x40000>; |
| ranges; |
| |
| esdhc@70004000 { /* ESDHC1 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70004000 0x4000>; |
| interrupts = <1>; |
| status = "disabled"; |
| }; |
| |
| esdhc@70008000 { /* ESDHC2 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70008000 0x4000>; |
| interrupts = <2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@7000c000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x7000c000 0x4000>; |
| interrupts = <33>; |
| status = "disabled"; |
| }; |
| |
| ecspi@70010000 { /* ECSPI1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x70010000 0x4000>; |
| interrupts = <36>; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@70014000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x70014000 0x4000>; |
| interrupts = <30>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| esdhc@70020000 { /* ESDHC3 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70020000 0x4000>; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| esdhc@70024000 { /* ESDHC4 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70024000 0x4000>; |
| interrupts = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpio1: gpio@73f84000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; |
| reg = <0x73f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| gpio2: gpio@73f88000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; |
| reg = <0x73f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| gpio3: gpio@73f8c000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; |
| reg = <0x73f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| gpio4: gpio@73f90000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; |
| reg = <0x73f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| wdog@73f98000 { /* WDOG1 */ |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f98000 0x4000>; |
| interrupts = <58>; |
| status = "disabled"; |
| }; |
| |
| wdog@73f9c000 { /* WDOG2 */ |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f9c000 0x4000>; |
| interrupts = <59>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@73fbc000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fbc000 0x4000>; |
| interrupts = <31>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@73fc0000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fc0000 0x4000>; |
| interrupts = <32>; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips@80000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x10000000>; |
| ranges; |
| |
| ecspi@83fac000 { /* ECSPI2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x83fac000 0x4000>; |
| interrupts = <37>; |
| status = "disabled"; |
| }; |
| |
| sdma@83fb0000 { |
| compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; |
| reg = <0x83fb0000 0x4000>; |
| interrupts = <6>; |
| }; |
| |
| cspi@83fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; |
| reg = <0x83fc0000 0x4000>; |
| interrupts = <38>; |
| status = "disabled"; |
| }; |
| |
| i2c@83fc4000 { /* I2C2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; |
| reg = <0x83fc4000 0x4000>; |
| interrupts = <63>; |
| status = "disabled"; |
| }; |
| |
| i2c@83fc8000 { /* I2C1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; |
| reg = <0x83fc8000 0x4000>; |
| interrupts = <62>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@83fcc000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fcc000 0x4000>; |
| interrupts = <29>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| audmux@83fd0000 { |
| compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; |
| reg = <0x83fd0000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@83fe8000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fe8000 0x4000>; |
| interrupts = <96>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| ethernet@83fec000 { |
| compatible = "fsl,imx51-fec", "fsl,imx27-fec"; |
| reg = <0x83fec000 0x4000>; |
| interrupts = <87>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
