blob: 4634cb861a597d115b5f6dab784da3a616c81b01 [file] [log] [blame]
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&icoll>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
};
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
apb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x80000>;
ranges;
apbh@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x3c900>;
ranges;
icoll: interrupt-controller@80000000 {
compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x80000000 0x2000>;
};
hsadc@80002000 {
reg = <0x80002000 2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 2000>;
};
perfmon@80006000 {
reg = <0x80006000 800>;
interrupts = <27>;
status = "disabled";
};
bch@8000a000 {
reg = <0x8000a000 2000>;
interrupts = <41>;
status = "disabled";
};
gpmi@8000c000 {
reg = <0x8000c000 2000>;
interrupts = <42 88>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
reg = <0x80012000 2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
reg = <0x80014000 2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
reg = <0x80016000 2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
pinctrl@80018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
reg = <0x80018000 2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <127>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@1 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <126>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <125>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@3 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <124>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@4 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
interrupts = <123>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <0x3102 0x3112>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <0x4000 0x4010 0x4020
0x4030 0x4040 0x4060 0x4070
0x4080 0x4100>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mac1_pins_a: mac1@0 {
reg = <0>;
fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
0x40e1 0x40b1 0x40c1>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <0x2000 0x2010 0x2020
0x2030 0x2040 0x2050 0x2060
0x2070 0x2080 0x2090 0x20a0>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
fsl,pinmux-ids = <0x2090>;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
fsl,pinmux-ids = <0x20a0>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
fsl,pinmux-ids = <0x3180 0x3190>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids =
<0x3140 0x3150 0x3160 0x3170>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif1_pins_a: saif1@0 {
reg = <0>;
fsl,pinmux-ids = <0x31a0>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
};
digctl@8001c000 {
reg = <0x8001c000 2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
reg = <0x80022000 2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 2000>;
};
dcp@80028000 {
reg = <0x80028000 2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
reg = <0x8002a000 2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
reg = <0x8002c000 2000>;
status = "disabled";
};
axi-ahb@8002e000 {
reg = <0x8002e000 2000>;
status = "disabled";
};
lcdif@80030000 {
reg = <0x80030000 2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
reg = <0x80032000 2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
reg = <0x80034000 2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
reg = <0x8003c000 200>;
status = "disabled";
};
simgpmisel@8003c200 {
reg = <0x8003c200 100>;
status = "disabled";
};
simsspsel@8003c300 {
reg = <0x8003c300 100>;
status = "disabled";
};
simmemsel@8003c400 {
reg = <0x8003c400 100>;
status = "disabled";
};
gpiomon@8003c500 {
reg = <0x8003c500 100>;
status = "disabled";
};
simenet@8003c700 {
reg = <0x8003c700 100>;
status = "disabled";
};
armjtag@8003c800 {
reg = <0x8003c800 100>;
status = "disabled";
};
};
apbx@80040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80040000 0x40000>;
ranges;
clkctl@80040000 {
reg = <0x80040000 2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
reg = <0x80044000 2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
reg = <0x80046000 2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
reg = <0x80050000 2000>;
status = "disabled";
};
spdif@80054000 {
reg = <0x80054000 2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
reg = <0x80056000 2000>;
interrupts = <28 29>;
status = "disabled";
};
i2c0: i2c@80058000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
status = "disabled";
};
i2c1: i2c@8005a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 2000>;
interrupts = <110 69>;
status = "disabled";
};
pwm@80064000 {
reg = <0x80064000 2000>;
status = "disabled";
};
timrot@80068000 {
reg = <0x80068000 2000>;
status = "disabled";
};
auart0: serial@8006a000 {
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
};
duart: serial@80074000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80074000 0x1000>;
interrupts = <47>;
status = "disabled";
};
usbphy0: usbphy@8007c000 {
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
reg = <0x8007e000 0x2000>;
status = "disabled";
};
};
};
ahb@80080000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80080000 0x80000>;
ranges;
usbctrl0: usbctrl@80080000 {
reg = <0x80080000 0x10000>;
status = "disabled";
};
usbctrl1: usbctrl@80090000 {
reg = <0x80090000 0x10000>;
status = "disabled";
};
dflpt@800c0000 {
reg = <0x800c0000 0x10000>;
status = "disabled";
};
mac0: ethernet@800f0000 {
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
status = "disabled";
};
mac1: ethernet@800f4000 {
compatible = "fsl,imx28-fec";
reg = <0x800f4000 0x4000>;
interrupts = <102>;
status = "disabled";
};
switch@800f8000 {
reg = <0x800f8000 0x8000>;
status = "disabled";
};
};
};