Google Git
Sign in
googlers / maze / linux / a62f0d27b4196bad5e900d766b285feb7069cd16 / . / sound / soc / codecs / wm8904.c
blob: c6f0abcc57113449228f6a4ac7c754f96c3d0a23 [file] [log] [blame]
/*
* wm8904.c -- WM8904 ALSA SoC Audio driver
*
* Copyright 2009 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/wm8904.h>
#include "wm8904.h"
static struct snd_soc_codec *wm8904_codec;
struct snd_soc_codec_device soc_codec_dev_wm8904;
enum wm8904_type {
WM8904,
WM8912,
};
#define WM8904_NUM_DCS_CHANNELS 4
#define WM8904_NUM_SUPPLIES 5
static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
"DCVDD",
"DBVDD",
"AVDD",
"CPVDD",
"MICVDD",
};
/* codec private data */
struct wm8904_priv {
struct snd_soc_codec codec;
u16 reg_cache[WM8904_MAX_REGISTER + 1];
enum wm8904_type devtype;
struct regulator_bulk_data supplies[WM8904_NUM_SUPPLIES];
struct wm8904_pdata *pdata;
int deemph;
/* Platform provided DRC configuration */
const char **drc_texts;
int drc_cfg;
struct soc_enum drc_enum;
/* Platform provided ReTune mobile configuration */
int num_retune_mobile_texts;
const char **retune_mobile_texts;
int retune_mobile_cfg;
struct soc_enum retune_mobile_enum;
/* FLL setup */
int fll_src;
int fll_fref;
int fll_fout;
/* Clocking configuration */
unsigned int mclk_rate;
int sysclk_src;
unsigned int sysclk_rate;
int tdm_width;
int tdm_slots;
int bclk;
int fs;
/* DC servo configuration - cached offset values */
int dcs_state[WM8904_NUM_DCS_CHANNELS];
};
static const u16 wm8904_reg[WM8904_MAX_REGISTER + 1] = {
0x8904, /* R0 - SW Reset and ID */
0x0000, /* R1 - Revision */
0x0000, /* R2 */
0x0000, /* R3 */
0x0018, /* R4 - Bias Control 0 */
0x0000, /* R5 - VMID Control 0 */
0x0000, /* R6 - Mic Bias Control 0 */
0x0000, /* R7 - Mic Bias Control 1 */
0x0001, /* R8 - Analogue DAC 0 */
0x9696, /* R9 - mic Filter Control */
0x0001, /* R10 - Analogue ADC 0 */
0x0000, /* R11 */
0x0000, /* R12 - Power Management 0 */
0x0000, /* R13 */
0x0000, /* R14 - Power Management 2 */
0x0000, /* R15 - Power Management 3 */
0x0000, /* R16 */
0x0000, /* R17 */
0x0000, /* R18 - Power Management 6 */
0x0000, /* R19 */
0x945E, /* R20 - Clock Rates 0 */
0x0C05, /* R21 - Clock Rates 1 */
0x0006, /* R22 - Clock Rates 2 */
0x0000, /* R23 */
0x0050, /* R24 - Audio Interface 0 */
0x000A, /* R25 - Audio Interface 1 */
0x00E4, /* R26 - Audio Interface 2 */
0x0040, /* R27 - Audio Interface 3 */
0x0000, /* R28 */
0x0000, /* R29 */
0x00C0, /* R30 - DAC Digital Volume Left */
0x00C0, /* R31 - DAC Digital Volume Right */
0x0000, /* R32 - DAC Digital 0 */
0x0008, /* R33 - DAC Digital 1 */
0x0000, /* R34 */
0x0000, /* R35 */
0x00C0, /* R36 - ADC Digital Volume Left */
0x00C0, /* R37 - ADC Digital Volume Right */
0x0010, /* R38 - ADC Digital 0 */
0x0000, /* R39 - Digital Microphone 0 */
0x01AF, /* R40 - DRC 0 */
0x3248, /* R41 - DRC 1 */
0x0000, /* R42 - DRC 2 */
0x0000, /* R43 - DRC 3 */
0x0085, /* R44 - Analogue Left Input 0 */
0x0085, /* R45 - Analogue Right Input 0 */
0x0044, /* R46 - Analogue Left Input 1 */
0x0044, /* R47 - Analogue Right Input 1 */
0x0000, /* R48 */
0x0000, /* R49 */
0x0000, /* R50 */
0x0000, /* R51 */
0x0000, /* R52 */
0x0000, /* R53 */
0x0000, /* R54 */
0x0000, /* R55 */
0x0000, /* R56 */
0x002D, /* R57 - Analogue OUT1 Left */
0x002D, /* R58 - Analogue OUT1 Right */
0x0039, /* R59 - Analogue OUT2 Left */
0x0039, /* R60 - Analogue OUT2 Right */
0x0000, /* R61 - Analogue OUT12 ZC */
0x0000, /* R62 */
0x0000, /* R63 */
0x0000, /* R64 */
0x0000, /* R65 */
0x0000, /* R66 */
0x0000, /* R67 - DC Servo 0 */
0x0000, /* R68 - DC Servo 1 */
0xAAAA, /* R69 - DC Servo 2 */
0x0000, /* R70 */
0xAAAA, /* R71 - DC Servo 4 */
0xAAAA, /* R72 - DC Servo 5 */
0x0000, /* R73 - DC Servo 6 */
0x0000, /* R74 - DC Servo 7 */
0x0000, /* R75 - DC Servo 8 */
0x0000, /* R76 - DC Servo 9 */
0x0000, /* R77 - DC Servo Readback 0 */
0x0000, /* R78 */
0x0000, /* R79 */
0x0000, /* R80 */
0x0000, /* R81 */
0x0000, /* R82 */
0x0000, /* R83 */
0x0000, /* R84 */
0x0000, /* R85 */
0x0000, /* R86 */
0x0000, /* R87 */
0x0000, /* R88 */
0x0000, /* R89 */
0x0000, /* R90 - Analogue HP 0 */
0x0000, /* R91 */
0x0000, /* R92 */
0x0000, /* R93 */
0x0000, /* R94 - Analogue Lineout 0 */
0x0000, /* R95 */
0x0000, /* R96 */
0x0000, /* R97 */
0x0000, /* R98 - Charge Pump 0 */
0x0000, /* R99 */
0x0000, /* R100 */
0x0000, /* R101 */
0x0000, /* R102 */
0x0000, /* R103 */
0x0004, /* R104 - Class W 0 */
0x0000, /* R105 */
0x0000, /* R106 */
0x0000, /* R107 */
0x0000, /* R108 - Write Sequencer 0 */
0x0000, /* R109 - Write Sequencer 1 */
0x0000, /* R110 - Write Sequencer 2 */
0x0000, /* R111 - Write Sequencer 3 */
0x0000, /* R112 - Write Sequencer 4 */
0x0000, /* R113 */
0x0000, /* R114 */
0x0000, /* R115 */
0x0000, /* R116 - FLL Control 1 */
0x0007, /* R117 - FLL Control 2 */
0x0000, /* R118 - FLL Control 3 */
0x2EE0, /* R119 - FLL Control 4 */
0x0004, /* R120 - FLL Control 5 */
0x0014, /* R121 - GPIO Control 1 */
0x0010, /* R122 - GPIO Control 2 */
0x0010, /* R123 - GPIO Control 3 */
0x0000, /* R124 - GPIO Control 4 */
0x0000, /* R125 */
0x0000, /* R126 - Digital Pulls */
0x0000, /* R127 - Interrupt Status */
0xFFFF, /* R128 - Interrupt Status Mask */
0x0000, /* R129 - Interrupt Polarity */
0x0000, /* R130 - Interrupt Debounce */
0x0000, /* R131 */
0x0000, /* R132 */
0x0000, /* R133 */
0x0000, /* R134 - EQ1 */
0x000C, /* R135 - EQ2 */
0x000C, /* R136 - EQ3 */
0x000C, /* R137 - EQ4 */
0x000C, /* R138 - EQ5 */
0x000C, /* R139 - EQ6 */
0x0FCA, /* R140 - EQ7 */
0x0400, /* R141 - EQ8 */
0x00D8, /* R142 - EQ9 */
0x1EB5, /* R143 - EQ10 */
0xF145, /* R144 - EQ11 */
0x0B75, /* R145 - EQ12 */
0x01C5, /* R146 - EQ13 */
0x1C58, /* R147 - EQ14 */
0xF373, /* R148 - EQ15 */
0x0A54, /* R149 - EQ16 */
0x0558, /* R150 - EQ17 */
0x168E, /* R151 - EQ18 */
0xF829, /* R152 - EQ19 */
0x07AD, /* R153 - EQ20 */
0x1103, /* R154 - EQ21 */
0x0564, /* R155 - EQ22 */
0x0559, /* R156 - EQ23 */
0x4000, /* R157 - EQ24 */
0x0000, /* R158 */
0x0000, /* R159 */
0x0000, /* R160 */
0x0000, /* R161 - Control Interface Test 1 */
0x0000, /* R162 */
0x0000, /* R163 */
0x0000, /* R164 */
0x0000, /* R165 */
0x0000, /* R166 */
0x0000, /* R167 */
0x0000, /* R168 */
0x0000, /* R169 */
0x0000, /* R170 */
0x0000, /* R171 */
0x0000, /* R172 */
0x0000, /* R173 */
0x0000, /* R174 */
0x0000, /* R175 */
0x0000, /* R176 */
0x0000, /* R177 */
0x0000, /* R178 */
0x0000, /* R179 */
0x0000, /* R180 */
0x0000, /* R181 */
0x0000, /* R182 */
0x0000, /* R183 */
0x0000, /* R184 */
0x0000, /* R185 */
0x0000, /* R186 */
0x0000, /* R187 */
0x0000, /* R188 */
0x0000, /* R189 */
0x0000, /* R190 */
0x0000, /* R191 */
0x0000, /* R192 */
0x0000, /* R193 */
0x0000, /* R194 */
0x0000, /* R195 */
0x0000, /* R196 */
0x0000, /* R197 */
0x0000, /* R198 */
0x0000, /* R199 */
0x0000, /* R200 */
0x0000, /* R201 */
0x0000, /* R202 */
0x0000, /* R203 */
0x0000, /* R204 - Analogue Output Bias 0 */
0x0000, /* R205 */
0x0000, /* R206 */
0x0000, /* R207 */
0x0000, /* R208 */
0x0000, /* R209 */
0x0000, /* R210 */
0x0000, /* R211 */
0x0000, /* R212 */
0x0000, /* R213 */
0x0000, /* R214 */
0x0000, /* R215 */
0x0000, /* R216 */
0x0000, /* R217 */
0x0000, /* R218 */
0x0000, /* R219 */
0x0000, /* R220 */
0x0000, /* R221 */
0x0000, /* R222 */
0x0000, /* R223 */
0x0000, /* R224 */
0x0000, /* R225 */
0x0000, /* R226 */
0x0000, /* R227 */
0x0000, /* R228 */
0x0000, /* R229 */
0x0000, /* R230 */
0x0000, /* R231 */
0x0000, /* R232 */
0x0000, /* R233 */
0x0000, /* R234 */
0x0000, /* R235 */
0x0000, /* R236 */
0x0000, /* R237 */
0x0000, /* R238 */
0x0000, /* R239 */
0x0000, /* R240 */
0x0000, /* R241 */
0x0000, /* R242 */
0x0000, /* R243 */
0x0000, /* R244 */
0x0000, /* R245 */
0x0000, /* R246 */
0x0000, /* R247 - FLL NCO Test 0 */
0x0019, /* R248 - FLL NCO Test 1 */
};
static struct {
int readable;
int writable;
int vol;
} wm8904_access[] = {
{ 0xFFFF, 0xFFFF, 1 }, /* R0 - SW Reset and ID */
{ 0x0000, 0x0000, 0 }, /* R1 - Revision */
{ 0x0000, 0x0000, 0 }, /* R2 */
{ 0x0000, 0x0000, 0 }, /* R3 */
{ 0x001F, 0x001F, 0 }, /* R4 - Bias Control 0 */
{ 0x0047, 0x0047, 0 }, /* R5 - VMID Control 0 */
{ 0x007F, 0x007F, 0 }, /* R6 - Mic Bias Control 0 */
{ 0xC007, 0xC007, 0 }, /* R7 - Mic Bias Control 1 */
{ 0x001E, 0x001E, 0 }, /* R8 - Analogue DAC 0 */
{ 0xFFFF, 0xFFFF, 0 }, /* R9 - mic Filter Control */
{ 0x0001, 0x0001, 0 }, /* R10 - Analogue ADC 0 */
{ 0x0000, 0x0000, 0 }, /* R11 */
{ 0x0003, 0x0003, 0 }, /* R12 - Power Management 0 */
{ 0x0000, 0x0000, 0 }, /* R13 */
{ 0x0003, 0x0003, 0 }, /* R14 - Power Management 2 */
{ 0x0003, 0x0003, 0 }, /* R15 - Power Management 3 */
{ 0x0000, 0x0000, 0 }, /* R16 */
{ 0x0000, 0x0000, 0 }, /* R17 */
{ 0x000F, 0x000F, 0 }, /* R18 - Power Management 6 */
{ 0x0000, 0x0000, 0 }, /* R19 */
{ 0x7001, 0x7001, 0 }, /* R20 - Clock Rates 0 */
{ 0x3C07, 0x3C07, 0 }, /* R21 - Clock Rates 1 */
{ 0xD00F, 0xD00F, 0 }, /* R22 - Clock Rates 2 */
{ 0x0000, 0x0000, 0 }, /* R23 */
{ 0x1FFF, 0x1FFF, 0 }, /* R24 - Audio Interface 0 */
{ 0x3DDF, 0x3DDF, 0 }, /* R25 - Audio Interface 1 */
{ 0x0F1F, 0x0F1F, 0 }, /* R26 - Audio Interface 2 */
{ 0x0FFF, 0x0FFF, 0 }, /* R27 - Audio Interface 3 */
{ 0x0000, 0x0000, 0 }, /* R28 */
{ 0x0000, 0x0000, 0 }, /* R29 */
{ 0x00FF, 0x01FF, 0 }, /* R30 - DAC Digital Volume Left */
{ 0x00FF, 0x01FF, 0 }, /* R31 - DAC Digital Volume Right */
{ 0x0FFF, 0x0FFF, 0 }, /* R32 - DAC Digital 0 */
{ 0x1E4E, 0x1E4E, 0 }, /* R33 - DAC Digital 1 */
{ 0x0000, 0x0000, 0 }, /* R34 */
{ 0x0000, 0x0000, 0 }, /* R35 */
{ 0x00FF, 0x01FF, 0 }, /* R36 - ADC Digital Volume Left */
{ 0x00FF, 0x01FF, 0 }, /* R37 - ADC Digital Volume Right */
{ 0x0073, 0x0073, 0 }, /* R38 - ADC Digital 0 */
{ 0x1800, 0x1800, 0 }, /* R39 - Digital Microphone 0 */
{ 0xDFEF, 0xDFEF, 0 }, /* R40 - DRC 0 */
{ 0xFFFF, 0xFFFF, 0 }, /* R41 - DRC 1 */
{ 0x003F, 0x003F, 0 }, /* R42 - DRC 2 */
{ 0x07FF, 0x07FF, 0 }, /* R43 - DRC 3 */
{ 0x009F, 0x009F, 0 }, /* R44 - Analogue Left Input 0 */
{ 0x009F, 0x009F, 0 }, /* R45 - Analogue Right Input 0 */
{ 0x007F, 0x007F, 0 }, /* R46 - Analogue Left Input 1 */
{ 0x007F, 0x007F, 0 }, /* R47 - Analogue Right Input 1 */
{ 0x0000, 0x0000, 0 }, /* R48 */
{ 0x0000, 0x0000, 0 }, /* R49 */
{ 0x0000, 0x0000, 0 }, /* R50 */
{ 0x0000, 0x0000, 0 }, /* R51 */
{ 0x0000, 0x0000, 0 }, /* R52 */
{ 0x0000, 0x0000, 0 }, /* R53 */
{ 0x0000, 0x0000, 0 }, /* R54 */
{ 0x0000, 0x0000, 0 }, /* R55 */
{ 0x0000, 0x0000, 0 }, /* R56 */
{ 0x017F, 0x01FF, 0 }, /* R57 - Analogue OUT1 Left */
{ 0x017F, 0x01FF, 0 }, /* R58 - Analogue OUT1 Right */
{ 0x017F, 0x01FF, 0 }, /* R59 - Analogue OUT2 Left */
{ 0x017F, 0x01FF, 0 }, /* R60 - Analogue OUT2 Right */
{ 0x000F, 0x000F, 0 }, /* R61 - Analogue OUT12 ZC */
{ 0x0000, 0x0000, 0 }, /* R62 */
{ 0x0000, 0x0000, 0 }, /* R63 */
{ 0x0000, 0x0000, 0 }, /* R64 */
{ 0x0000, 0x0000, 0 }, /* R65 */
{ 0x0000, 0x0000, 0 }, /* R66 */
{ 0x000F, 0x000F, 0 }, /* R67 - DC Servo 0 */
{ 0xFFFF, 0xFFFF, 1 }, /* R68 - DC Servo 1 */
{ 0x0F0F, 0x0F0F, 0 }, /* R69 - DC Servo 2 */
{ 0x0000, 0x0000, 0 }, /* R70 */
{ 0x007F, 0x007F, 0 }, /* R71 - DC Servo 4 */
{ 0x007F, 0x007F, 0 }, /* R72 - DC Servo 5 */
{ 0x00FF, 0x00FF, 1 }, /* R73 - DC Servo 6 */
{ 0x00FF, 0x00FF, 1 }, /* R74 - DC Servo 7 */
{ 0x00FF, 0x00FF, 1 }, /* R75 - DC Servo 8 */
{ 0x00FF, 0x00FF, 1 }, /* R76 - DC Servo 9 */
{ 0x0FFF, 0x0000, 1 }, /* R77 - DC Servo Readback 0 */
{ 0x0000, 0x0000, 0 }, /* R78 */
{ 0x0000, 0x0000, 0 }, /* R79 */
{ 0x0000, 0x0000, 0 }, /* R80 */
{ 0x0000, 0x0000, 0 }, /* R81 */
{ 0x0000, 0x0000, 0 }, /* R82 */
{ 0x0000, 0x0000, 0 }, /* R83 */
{ 0x0000, 0x0000, 0 }, /* R84 */
{ 0x0000, 0x0000, 0 }, /* R85 */
{ 0x0000, 0x0000, 0 }, /* R86 */
{ 0x0000, 0x0000, 0 }, /* R87 */
{ 0x0000, 0x0000, 0 }, /* R88 */
{ 0x0000, 0x0000, 0 }, /* R89 */
{ 0x00FF, 0x00FF, 0 }, /* R90 - Analogue HP 0 */
{ 0x0000, 0x0000, 0 }, /* R91 */
{ 0x0000, 0x0000, 0 }, /* R92 */
{ 0x0000, 0x0000, 0 }, /* R93 */
{ 0x00FF, 0x00FF, 0 }, /* R94 - Analogue Lineout 0 */
{ 0x0000, 0x0000, 0 }, /* R95 */
{ 0x0000, 0x0000, 0 }, /* R96 */
{ 0x0000, 0x0000, 0 }, /* R97 */
{ 0x0001, 0x0001, 0 }, /* R98 - Charge Pump 0 */
{ 0x0000, 0x0000, 0 }, /* R99 */
{ 0x0000, 0x0000, 0 }, /* R100 */
{ 0x0000, 0x0000, 0 }, /* R101 */
{ 0x0000, 0x0000, 0 }, /* R102 */
{ 0x0000, 0x0000, 0 }, /* R103 */
{ 0x0001, 0x0001, 0 }, /* R104 - Class W 0 */
{ 0x0000, 0x0000, 0 }, /* R105 */
{ 0x0000, 0x0000, 0 }, /* R106 */
{ 0x0000, 0x0000, 0 }, /* R107 */
{ 0x011F, 0x011F, 0 }, /* R108 - Write Sequencer 0 */
{ 0x7FFF, 0x7FFF, 0 }, /* R109 - Write Sequencer 1 */
{ 0x4FFF, 0x4FFF, 0 }, /* R110 - Write Sequencer 2 */
{ 0x003F, 0x033F, 0 }, /* R111 - Write Sequencer 3 */
{ 0x03F1, 0x0000, 0 }, /* R112 - Write Sequencer 4 */
{ 0x0000, 0x0000, 0 }, /* R113 */
{ 0x0000, 0x0000, 0 }, /* R114 */
{ 0x0000, 0x0000, 0 }, /* R115 */
{ 0x0007, 0x0007, 0 }, /* R116 - FLL Control 1 */
{ 0x3F77, 0x3F77, 0 }, /* R117 - FLL Control 2 */
{ 0xFFFF, 0xFFFF, 0 }, /* R118 - FLL Control 3 */
{ 0x7FEF, 0x7FEF, 0 }, /* R119 - FLL Control 4 */
{ 0x001B, 0x001B, 0 }, /* R120 - FLL Control 5 */
{ 0x003F, 0x003F, 0 }, /* R121 - GPIO Control 1 */
{ 0x003F, 0x003F, 0 }, /* R122 - GPIO Control 2 */
{ 0x003F, 0x003F, 0 }, /* R123 - GPIO Control 3 */
{ 0x038F, 0x038F, 0 }, /* R124 - GPIO Control 4 */
{ 0x0000, 0x0000, 0 }, /* R125 */
{ 0x00FF, 0x00FF, 0 }, /* R126 - Digital Pulls */
{ 0x07FF, 0x03FF, 1 }, /* R127 - Interrupt Status */
{ 0x03FF, 0x03FF, 0 }, /* R128 - Interrupt Status Mask */
{ 0x03FF, 0x03FF, 0 }, /* R129 - Interrupt Polarity */
{ 0x03FF, 0x03FF, 0 }, /* R130 - Interrupt Debounce */
{ 0x0000, 0x0000, 0 }, /* R131 */
{ 0x0000, 0x0000, 0 }, /* R132 */
{ 0x0000, 0x0000, 0 }, /* R133 */
{ 0x0001, 0x0001, 0 }, /* R134 - EQ1 */
{ 0x001F, 0x001F, 0 }, /* R135 - EQ2 */
{ 0x001F, 0x001F, 0 }, /* R136 - EQ3 */
{ 0x001F, 0x001F, 0 }, /* R137 - EQ4 */
{ 0x001F, 0x001F, 0 }, /* R138 - EQ5 */
{ 0x001F, 0x001F, 0 }, /* R139 - EQ6 */
{ 0xFFFF, 0xFFFF, 0 }, /* R140 - EQ7 */
{ 0xFFFF, 0xFFFF, 0 }, /* R141 - EQ8 */
{ 0xFFFF, 0xFFFF, 0 }, /* R142 - EQ9 */
{ 0xFFFF, 0xFFFF, 0 }, /* R143 - EQ10 */
{ 0xFFFF, 0xFFFF, 0 }, /* R144 - EQ11 */
{ 0xFFFF, 0xFFFF, 0 }, /* R145 - EQ12 */
{ 0xFFFF, 0xFFFF, 0 }, /* R146 - EQ13 */
{ 0xFFFF, 0xFFFF, 0 }, /* R147 - EQ14 */
{ 0xFFFF, 0xFFFF, 0 }, /* R148 - EQ15 */
{ 0xFFFF, 0xFFFF, 0 }, /* R149 - EQ16 */
{ 0xFFFF, 0xFFFF, 0 }, /* R150 - EQ17 */
{ 0xFFFF, 0xFFFF, 0 }, /* R151wm8523_dai - EQ18 */
{ 0xFFFF, 0xFFFF, 0 }, /* R152 - EQ19 */
{ 0xFFFF, 0xFFFF, 0 }, /* R153 - EQ20 */
{ 0xFFFF, 0xFFFF, 0 }, /* R154 - EQ21 */
{ 0xFFFF, 0xFFFF, 0 }, /* R155 - EQ22 */
{ 0xFFFF, 0xFFFF, 0 }, /* R156 - EQ23 */
{ 0xFFFF, 0xFFFF, 0 }, /* R157 - EQ24 */
{ 0x0000, 0x0000, 0 }, /* R158 */
{ 0x0000, 0x0000, 0 }, /* R159 */
{ 0x0000, 0x0000, 0 }, /* R160 */
{ 0x0002, 0x0002, 0 }, /* R161 - Control Interface Test 1 */
{ 0x0000, 0x0000, 0 }, /* R162 */
{ 0x0000, 0x0000, 0 }, /* R163 */
{ 0x0000, 0x0000, 0 }, /* R164 */
{ 0x0000, 0x0000, 0 }, /* R165 */
{ 0x0000, 0x0000, 0 }, /* R166 */
{ 0x0000, 0x0000, 0 }, /* R167 */
{ 0x0000, 0x0000, 0 }, /* R168 */
{ 0x0000, 0x0000, 0 }, /* R169 */
{ 0x0000, 0x0000, 0 }, /* R170 */
{ 0x0000, 0x0000, 0 }, /* R171 */
{ 0x0000, 0x0000, 0 }, /* R172 */
{ 0x0000, 0x0000, 0 }, /* R173 */
{ 0x0000, 0x0000, 0 }, /* R174 */
{ 0x0000, 0x0000, 0 }, /* R175 */
{ 0x0000, 0x0000, 0 }, /* R176 */
{ 0x0000, 0x0000, 0 }, /* R177 */
{ 0x0000, 0x0000, 0 }, /* R178 */
{ 0x0000, 0x0000, 0 }, /* R179 */
{ 0x0000, 0x0000, 0 }, /* R180 */
{ 0x0000, 0x0000, 0 }, /* R181 */
{ 0x0000, 0x0000, 0 }, /* R182 */
{ 0x0000, 0x0000, 0 }, /* R183 */
{ 0x0000, 0x0000, 0 }, /* R184 */
{ 0x0000, 0x0000, 0 }, /* R185 */
{ 0x0000, 0x0000, 0 }, /* R186 */
{ 0x0000, 0x0000, 0 }, /* R187 */
{ 0x0000, 0x0000, 0 }, /* R188 */
{ 0x0000, 0x0000, 0 }, /* R189 */
{ 0x0000, 0x0000, 0 }, /* R190 */
{ 0x0000, 0x0000, 0 }, /* R191 */
{ 0x0000, 0x0000, 0 }, /* R192 */
{ 0x0000, 0x0000, 0 }, /* R193 */
{ 0x0000, 0x0000, 0 }, /* R194 */
{ 0x0000, 0x0000, 0 }, /* R195 */
{ 0x0000, 0x0000, 0 }, /* R196 */
{ 0x0000, 0x0000, 0 }, /* R197 */
{ 0x0000, 0x0000, 0 }, /* R198 */
{ 0x0000, 0x0000, 0 }, /* R199 */
{ 0x0000, 0x0000, 0 }, /* R200 */
{ 0x0000, 0x0000, 0 }, /* R201 */
{ 0x0000, 0x0000, 0 }, /* R202 */
{ 0x0000, 0x0000, 0 }, /* R203 */
{ 0x0070, 0x0070, 0 }, /* R204 - Analogue Output Bias 0 */
{ 0x0000, 0x0000, 0 }, /* R205 */
{ 0x0000, 0x0000, 0 }, /* R206 */
{ 0x0000, 0x0000, 0 }, /* R207 */
{ 0x0000, 0x0000, 0 }, /* R208 */
{ 0x0000, 0x0000, 0 }, /* R209 */
{ 0x0000, 0x0000, 0 }, /* R210 */
{ 0x0000, 0x0000, 0 }, /* R211 */
{ 0x0000, 0x0000, 0 }, /* R212 */
{ 0x0000, 0x0000, 0 }, /* R213 */
{ 0x0000, 0x0000, 0 }, /* R214 */
{ 0x0000, 0x0000, 0 }, /* R215 */
{ 0x0000, 0x0000, 0 }, /* R216 */
{ 0x0000, 0x0000, 0 }, /* R217 */
{ 0x0000, 0x0000, 0 }, /* R218 */
{ 0x0000, 0x0000, 0 }, /* R219 */
{ 0x0000, 0x0000, 0 }, /* R220 */
{ 0x0000, 0x0000, 0 }, /* R221 */
{ 0x0000, 0x0000, 0 }, /* R222 */
{ 0x0000, 0x0000, 0 }, /* R223 */
{ 0x0000, 0x0000, 0 }, /* R224 */
{ 0x0000, 0x0000, 0 }, /* R225 */
{ 0x0000, 0x0000, 0 }, /* R226 */
{ 0x0000, 0x0000, 0 }, /* R227 */
{ 0x0000, 0x0000, 0 }, /* R228 */
{ 0x0000, 0x0000, 0 }, /* R229 */
{ 0x0000, 0x0000, 0 }, /* R230 */
{ 0x0000, 0x0000, 0 }, /* R231 */
{ 0x0000, 0x0000, 0 }, /* R232 */
{ 0x0000, 0x0000, 0 }, /* R233 */
{ 0x0000, 0x0000, 0 }, /* R234 */
{ 0x0000, 0x0000, 0 }, /* R235 */
{ 0x0000, 0x0000, 0 }, /* R236 */
{ 0x0000, 0x0000, 0 }, /* R237 */
{ 0x0000, 0x0000, 0 }, /* R238 */
{ 0x0000, 0x0000, 0 }, /* R239 */
{ 0x0000, 0x0000, 0 }, /* R240 */
{ 0x0000, 0x0000, 0 }, /* R241 */
{ 0x0000, 0x0000, 0 }, /* R242 */
{ 0x0000, 0x0000, 0 }, /* R243 */
{ 0x0000, 0x0000, 0 }, /* R244 */
{ 0x0000, 0x0000, 0 }, /* R245 */
{ 0x0000, 0x0000, 0 }, /* R246 */
{ 0x0001, 0x0001, 0 }, /* R247 - FLL NCO Test 0 */
{ 0x003F, 0x003F, 0 }, /* R248 - FLL NCO Test 1 */
};
static int wm8904_volatile_register(unsigned int reg)
{
return wm8904_access[reg].vol;
}
static int wm8904_reset(struct snd_soc_codec *codec)
{
return snd_soc_write(codec, WM8904_SW_RESET_AND_ID, 0);
}
static int wm8904_configure_clocking(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
unsigned int clock0, clock2, rate;
/* Gate the clock while we're updating to avoid misclocking */
clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
WM8904_SYSCLK_SRC, 0);
/* This should be done on init() for bypass paths */
switch (wm8904->sysclk_src) {
case WM8904_CLK_MCLK:
dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8904->mclk_rate);
clock2 &= ~WM8904_SYSCLK_SRC;
rate = wm8904->mclk_rate;
/* Ensure the FLL is stopped */
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
break;
case WM8904_CLK_FLL:
dev_dbg(codec->dev, "Using %dHz FLL clock\n",
wm8904->fll_fout);
clock2 |= WM8904_SYSCLK_SRC;
rate = wm8904->fll_fout;
break;
default:
dev_err(codec->dev, "System clock not configured\n");
return -EINVAL;
}
/* SYSCLK shouldn't be over 13.5MHz */
if (rate > 13500000) {
clock0 = WM8904_MCLK_DIV;
wm8904->sysclk_rate = rate / 2;
} else {
clock0 = 0;
wm8904->sysclk_rate = rate;
}
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0, WM8904_MCLK_DIV,
clock0);
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
WM8904_CLK_SYS_ENA | WM8904_SYSCLK_SRC, clock2);
dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8904->sysclk_rate);
return 0;
}
static void wm8904_set_drc(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
struct wm8904_pdata *pdata = wm8904->pdata;
int save, i;
/* Save any enables; the configuration should clear them. */
save = snd_soc_read(codec, WM8904_DRC_0);
for (i = 0; i < WM8904_DRC_REGS; i++)
snd_soc_update_bits(codec, WM8904_DRC_0 + i, 0xffff,
pdata->drc_cfgs[wm8904->drc_cfg].regs[i]);
/* Reenable the DRC */
snd_soc_update_bits(codec, WM8904_DRC_0,
WM8904_DRC_ENA | WM8904_DRC_DAC_PATH, save);
}
static int wm8904_put_drc_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
struct wm8904_pdata *pdata = wm8904->pdata;
int value = ucontrol->value.integer.value[0];
if (value >= pdata->num_drc_cfgs)
return -EINVAL;
wm8904->drc_cfg = value;
wm8904_set_drc(codec);
return 0;
}
static int wm8904_get_drc_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
ucontrol->value.enumerated.item[0] = wm8904->drc_cfg;
return 0;
}
static void wm8904_set_retune_mobile(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
struct wm8904_pdata *pdata = wm8904->pdata;
int best, best_val, save, i, cfg;
if (!pdata || !wm8904->num_retune_mobile_texts)
return;
/* Find the version of the currently selected configuration
* with the nearest sample rate. */
cfg = wm8904->retune_mobile_cfg;
best = 0;
best_val = INT_MAX;
for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
if (strcmp(pdata->retune_mobile_cfgs[i].name,
wm8904->retune_mobile_texts[cfg]) == 0 &&
abs(pdata->retune_mobile_cfgs[i].rate
- wm8904->fs) < best_val) {
best = i;
best_val = abs(pdata->retune_mobile_cfgs[i].rate
- wm8904->fs);
}
}
dev_dbg(codec->dev, "ReTune Mobile %s/%dHz for %dHz sample rate\n",
pdata->retune_mobile_cfgs[best].name,
pdata->retune_mobile_cfgs[best].rate,
wm8904->fs);
/* The EQ will be disabled while reconfiguring it, remember the
* current configuration.
*/
save = snd_soc_read(codec, WM8904_EQ1);
for (i = 0; i < WM8904_EQ_REGS; i++)
snd_soc_update_bits(codec, WM8904_EQ1 + i, 0xffff,
pdata->retune_mobile_cfgs[best].regs[i]);
snd_soc_update_bits(codec, WM8904_EQ1, WM8904_EQ_ENA, save);
}
static int wm8904_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
struct wm8904_pdata *pdata = wm8904->pdata;
int value = ucontrol->value.integer.value[0];
if (value >= pdata->num_retune_mobile_cfgs)
return -EINVAL;
wm8904->retune_mobile_cfg = value;
wm8904_set_retune_mobile(codec);
return 0;
}
static int wm8904_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
ucontrol->value.enumerated.item[0] = wm8904->retune_mobile_cfg;
return 0;
}
static int deemph_settings[] = { 0, 32000, 44100, 48000 };
static int wm8904_set_deemph(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
int val, i, best;
/* If we're using deemphasis select the nearest available sample
* rate.
*/
if (wm8904->deemph) {
best = 1;
for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
if (abs(deemph_settings[i] - wm8904->fs) <
abs(deemph_settings[best] - wm8904->fs))
best = i;
}
val = best << WM8904_DEEMPH_SHIFT;
} else {
val = 0;
}
dev_dbg(codec->dev, "Set deemphasis %d\n", val);
return snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
WM8904_DEEMPH_MASK, val);
}
static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
return wm8904->deemph;
}
static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = codec->private_data;
int deemph = ucontrol->value.enumerated.item[0];
if (deemph > 1)
return -EINVAL;
wm8904->deemph = deemph;
return wm8904_set_deemph(codec);
}
static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
static const char *input_mode_text[] = {
"Single-Ended", "Differential Line", "Differential Mic"
};
static const struct soc_enum lin_mode =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
static const struct soc_enum rin_mode =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
static const char *hpf_mode_text[] = {
"Hi-fi", "Voice 1", "Voice 2", "Voice 3"
};
static const struct soc_enum hpf_mode =
SOC_ENUM_SINGLE(WM8904_ADC_DIGITAL_0, 5, 4, hpf_mode_text);
static const struct snd_kcontrol_new wm8904_adc_snd_controls[] = {
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_DIGITAL_VOLUME_RIGHT, 1, 119, 0, digital_tlv),
SOC_ENUM("Left Caputure Mode", lin_mode),
SOC_ENUM("Right Capture Mode", rin_mode),
/* No TLV since it depends on mode */
SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
SOC_ENUM("High Pass Filter Mode", hpf_mode),
SOC_SINGLE("ADC 128x OSR Switch", WM8904_ANALOGUE_ADC_0, 0, 1, 0),
};
static const char *drc_path_text[] = {
"ADC", "DAC"
};
static const struct soc_enum drc_path =
SOC_ENUM_SINGLE(WM8904_DRC_0, 14, 2, drc_path_text);
static const struct snd_kcontrol_new wm8904_dac_snd_controls[] = {
SOC_SINGLE_TLV("Digital Playback Boost Volume",
WM8904_AUDIO_INTERFACE_0, 9, 3, 0, dac_boost_tlv),
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8904_DAC_DIGITAL_VOLUME_LEFT,
WM8904_DAC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
SOC_DOUBLE_R_TLV("Headphone Volume", WM8904_ANALOGUE_OUT1_LEFT,
WM8904_ANALOGUE_OUT1_RIGHT, 0, 63, 0, out_tlv),
SOC_DOUBLE_R("Headphone Switch", WM8904_ANALOGUE_OUT1_LEFT,
WM8904_ANALOGUE_OUT1_RIGHT, 8, 1, 1),
SOC_DOUBLE_R("Headphone ZC Switch", WM8904_ANALOGUE_OUT1_LEFT,
WM8904_ANALOGUE_OUT1_RIGHT, 6, 1, 0),
SOC_DOUBLE_R_TLV("Line Output Volume", WM8904_ANALOGUE_OUT2_LEFT,
WM8904_ANALOGUE_OUT2_RIGHT, 0, 63, 0, out_tlv),
SOC_DOUBLE_R("Line Output Switch", WM8904_ANALOGUE_OUT2_LEFT,
WM8904_ANALOGUE_OUT2_RIGHT, 8, 1, 1),
SOC_DOUBLE_R("Line Output ZC Switch", WM8904_ANALOGUE_OUT2_LEFT,
WM8904_ANALOGUE_OUT2_RIGHT, 6, 1, 0),
SOC_SINGLE("EQ Switch", WM8904_EQ1, 0, 1, 0),
SOC_SINGLE("DRC Switch", WM8904_DRC_0, 15, 1, 0),
SOC_ENUM("DRC Path", drc_path),
SOC_SINGLE("DAC OSRx2 Switch", WM8904_DAC_DIGITAL_1, 6, 1, 0),
SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
wm8904_get_deemph, wm8904_put_deemph),
};
static const struct snd_kcontrol_new wm8904_snd_controls[] = {
SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8904_DAC_DIGITAL_0, 4, 8, 15, 0,
sidetone_tlv),
};
static const struct snd_kcontrol_new wm8904_eq_controls[] = {
SOC_SINGLE_TLV("EQ1 Volume", WM8904_EQ2, 0, 24, 0, eq_tlv),
SOC_SINGLE_TLV("EQ2 Volume", WM8904_EQ3, 0, 24, 0, eq_tlv),
SOC_SINGLE_TLV("EQ3 Volume", WM8904_EQ4, 0, 24, 0, eq_tlv),
SOC_SINGLE_TLV("EQ4 Volume", WM8904_EQ5, 0, 24, 0, eq_tlv),
SOC_SINGLE_TLV("EQ5 Volume", WM8904_EQ6, 0, 24, 0, eq_tlv),
};
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
BUG_ON(event != SND_SOC_DAPM_POST_PMU);
/* Maximum startup time */
udelay(500);
return 0;
}
static int sysclk_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8904_priv *wm8904 = codec->private_data;
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* If we're using the FLL then we only start it when
* required; we assume that the configuration has been
* done previously and all we need to do is kick it
* off.
*/
switch (wm8904->sysclk_src) {
case WM8904_CLK_FLL:
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA,
WM8904_FLL_OSC_ENA);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_ENA,
WM8904_FLL_ENA);
break;
default:
break;
}
break;
case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
break;
}
return 0;
}
static int out_pga_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8904_priv *wm8904 = codec->private_data;
int reg, val;
int dcs_mask;
int dcs_l, dcs_r;
int dcs_l_reg, dcs_r_reg;
int timeout;
int pwr_reg;
/* This code is shared between HP and LINEOUT; we do all our
* power management in stereo pairs to avoid latency issues so
* we reuse shift to identify which rather than strcmp() the
* name. */
reg = w->shift;
switch (reg) {
case WM8904_ANALOGUE_HP_0:
pwr_reg = WM8904_POWER_MANAGEMENT_2;
dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
dcs_r_reg = WM8904_DC_SERVO_8;
dcs_l_reg = WM8904_DC_SERVO_9;
dcs_l = 0;
dcs_r = 1;
break;
case WM8904_ANALOGUE_LINEOUT_0:
pwr_reg = WM8904_POWER_MANAGEMENT_3;
dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
dcs_r_reg = WM8904_DC_SERVO_6;
dcs_l_reg = WM8904_DC_SERVO_7;
dcs_l = 2;
dcs_r = 3;
break;
default:
BUG();
return -EINVAL;
}
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* Power on the PGAs */
snd_soc_update_bits(codec, pwr_reg,
WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA);
/* Power on the amplifier */
snd_soc_update_bits(codec, reg,
WM8904_HPL_ENA | WM8904_HPR_ENA,
WM8904_HPL_ENA | WM8904_HPR_ENA);
/* Enable the first stage */
snd_soc_update_bits(codec, reg,
WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY,
WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY);
/* Power up the DC servo */
snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
dcs_mask, dcs_mask);
/* Either calibrate the DC servo or restore cached state
* if we have that.
*/
if (wm8904->dcs_state[dcs_l] || wm8904->dcs_state[dcs_r]) {
dev_dbg(codec->dev, "Restoring DC servo state\n");
snd_soc_write(codec, dcs_l_reg,
wm8904->dcs_state[dcs_l]);
snd_soc_write(codec, dcs_r_reg,
wm8904->dcs_state[dcs_r]);
snd_soc_write(codec, WM8904_DC_SERVO_1, dcs_mask);
timeout = 20;
} else {
dev_dbg(codec->dev, "Calibrating DC servo\n");
snd_soc_write(codec, WM8904_DC_SERVO_1,
dcs_mask << WM8904_DCS_TRIG_STARTUP_0_SHIFT);
timeout = 500;
}
/* Wait for DC servo to complete */
dcs_mask <<= WM8904_DCS_CAL_COMPLETE_SHIFT;
do {
val = snd_soc_read(codec, WM8904_DC_SERVO_READBACK_0);
if ((val & dcs_mask) == dcs_mask)
break;
msleep(1);
} while (--timeout);
if ((val & dcs_mask) != dcs_mask)
dev_warn(codec->dev, "DC servo timed out\n");
else
dev_dbg(codec->dev, "DC servo ready\n");
/* Enable the output stage */
snd_soc_update_bits(codec, reg,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
break;
case SND_SOC_DAPM_POST_PMU:
/* Unshort the output itself */
snd_soc_update_bits(codec, reg,
WM8904_HPL_RMV_SHORT |
WM8904_HPR_RMV_SHORT,
WM8904_HPL_RMV_SHORT |
WM8904_HPR_RMV_SHORT);
break;
case SND_SOC_DAPM_PRE_PMD:
/* Short the output */
snd_soc_update_bits(codec, reg,
WM8904_HPL_RMV_SHORT |
WM8904_HPR_RMV_SHORT, 0);
break;
case SND_SOC_DAPM_POST_PMD:
/* Cache the DC servo configuration; this will be
* invalidated if we change the configuration. */
wm8904->dcs_state[dcs_l] = snd_soc_read(codec, dcs_l_reg);
wm8904->dcs_state[dcs_r] = snd_soc_read(codec, dcs_r_reg);
snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
dcs_mask, 0);
/* Disable the amplifier input and output stages */
snd_soc_update_bits(codec, reg,
WM8904_HPL_ENA | WM8904_HPR_ENA |
WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY |
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
0);
/* PGAs too */
snd_soc_update_bits(codec, pwr_reg,
WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
0);
break;
}
return 0;
}
static const char *lin_text[] = {
"IN1L", "IN2L", "IN3L"
};
static const struct soc_enum lin_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 2, 3, lin_text);
static const struct snd_kcontrol_new lin_mux =
SOC_DAPM_ENUM("Left Capture Mux", lin_enum);
static const struct soc_enum lin_inv_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 4, 3, lin_text);
static const struct snd_kcontrol_new lin_inv_mux =
SOC_DAPM_ENUM("Left Capture Inveting Mux", lin_inv_enum);
static const char *rin_text[] = {
"IN1R", "IN2R", "IN3R"
};
static const struct soc_enum rin_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 2, 3, rin_text);
static const struct snd_kcontrol_new rin_mux =
SOC_DAPM_ENUM("Right Capture Mux", rin_enum);
static const struct soc_enum rin_inv_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 4, 3, rin_text);
static const struct snd_kcontrol_new rin_inv_mux =
SOC_DAPM_ENUM("Right Capture Inveting Mux", rin_inv_enum);
static const char *aif_text[] = {
"Left", "Right"
};
static const struct soc_enum aifoutl_enum =
SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 7, 2, aif_text);
static const struct snd_kcontrol_new aifoutl_mux =
SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
static const struct soc_enum aifoutr_enum =
SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 6, 2, aif_text);
static const struct snd_kcontrol_new aifoutr_mux =
SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
static const struct soc_enum aifinl_enum =
SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 5, 2, aif_text);
static const struct snd_kcontrol_new aifinl_mux =
SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
static const struct soc_enum aifinr_enum =
SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 4, 2, aif_text);
static const struct snd_kcontrol_new aifinr_mux =
SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
static const struct snd_soc_dapm_widget wm8904_core_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("SYSCLK", WM8904_CLOCK_RATES_2, 2, 0, sysclk_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8904_CLOCK_RATES_2, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("TOCLK", WM8904_CLOCK_RATES_2, 0, 0, NULL, 0),
};
static const struct snd_soc_dapm_widget wm8904_adc_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("IN1L"),
SND_SOC_DAPM_INPUT("IN1R"),
SND_SOC_DAPM_INPUT("IN2L"),
SND_SOC_DAPM_INPUT("IN2R"),
SND_SOC_DAPM_INPUT("IN3L"),
SND_SOC_DAPM_INPUT("IN3R"),
SND_SOC_DAPM_MICBIAS("MICBIAS", WM8904_MIC_BIAS_CONTROL_0, 0, 0),
SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lin_mux),
SND_SOC_DAPM_MUX("Left Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
&lin_inv_mux),
SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rin_mux),
SND_SOC_DAPM_MUX("Right Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
&rin_inv_mux),
SND_SOC_DAPM_PGA("Left Capture PGA", WM8904_POWER_MANAGEMENT_0, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA("Right Capture PGA", WM8904_POWER_MANAGEMENT_0, 0, 0,
NULL, 0),
SND_SOC_DAPM_ADC("ADCL", NULL, WM8904_POWER_MANAGEMENT_6, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, WM8904_POWER_MANAGEMENT_6, 0, 0),
SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
};
static const struct snd_soc_dapm_widget wm8904_dac_dapm_widgets[] = {
SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
SND_SOC_DAPM_DAC("DACL", NULL, WM8904_POWER_MANAGEMENT_6, 3, 0),
SND_SOC_DAPM_DAC("DACR", NULL, WM8904_POWER_MANAGEMENT_6, 2, 0),
SND_SOC_DAPM_SUPPLY("Charge pump", WM8904_CHARGE_PUMP_0, 0, 0, cp_event,
SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA("HPL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA("HPR PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("LINEL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA("LINER PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, WM8904_ANALOGUE_HP_0,
0, NULL, 0, out_pga_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_PGA_E("Line Output", SND_SOC_NOPM, WM8904_ANALOGUE_LINEOUT_0,
0, NULL, 0, out_pga_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_OUTPUT("HPOUTL"),
SND_SOC_DAPM_OUTPUT("HPOUTR"),
SND_SOC_DAPM_OUTPUT("LINEOUTL"),
SND_SOC_DAPM_OUTPUT("LINEOUTR"),
};
static const char *out_mux_text[] = {
"DAC", "Bypass"
};
static const struct soc_enum hpl_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 3, 2, out_mux_text);
static const struct snd_kcontrol_new hpl_mux =
SOC_DAPM_ENUM("HPL Mux", hpl_enum);
static const struct soc_enum hpr_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 2, 2, out_mux_text);
static const struct snd_kcontrol_new hpr_mux =
SOC_DAPM_ENUM("HPR Mux", hpr_enum);
static const struct soc_enum linel_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 1, 2, out_mux_text);
static const struct snd_kcontrol_new linel_mux =
SOC_DAPM_ENUM("LINEL Mux", linel_enum);
static const struct soc_enum liner_enum =
SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 0, 2, out_mux_text);
static const struct snd_kcontrol_new liner_mux =
SOC_DAPM_ENUM("LINEL Mux", liner_enum);
static const char *sidetone_text[] = {
"None", "Left", "Right"
};
static const struct soc_enum dacl_sidetone_enum =
SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 2, 3, sidetone_text);
static const struct snd_kcontrol_new dacl_sidetone_mux =
SOC_DAPM_ENUM("Left Sidetone Mux", dacl_sidetone_enum);
static const struct soc_enum dacr_sidetone_enum =
SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 0, 3, sidetone_text);
static const struct snd_kcontrol_new dacr_sidetone_mux =
SOC_DAPM_ENUM("Right Sidetone Mux", dacr_sidetone_enum);
static const struct snd_soc_dapm_widget wm8904_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("Class G", WM8904_CLASS_W_0, 0, 1, NULL, 0),
SND_SOC_DAPM_PGA("Left Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &dacl_sidetone_mux),
SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &dacr_sidetone_mux),
SND_SOC_DAPM_MUX("HPL Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
SND_SOC_DAPM_MUX("HPR Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
SND_SOC_DAPM_MUX("LINEL Mux", SND_SOC_NOPM, 0, 0, &linel_mux),
SND_SOC_DAPM_MUX("LINER Mux", SND_SOC_NOPM, 0, 0, &liner_mux),
};
static const struct snd_soc_dapm_route core_intercon[] = {
{ "CLK_DSP", NULL, "SYSCLK" },
{ "TOCLK", NULL, "SYSCLK" },
};
static const struct snd_soc_dapm_route adc_intercon[] = {
{ "Left Capture Mux", "IN1L", "IN1L" },
{ "Left Capture Mux", "IN2L", "IN2L" },
{ "Left Capture Mux", "IN3L", "IN3L" },
{ "Left Capture Inverting Mux", "IN1L", "IN1L" },
{ "Left Capture Inverting Mux", "IN2L", "IN2L" },
{ "Left Capture Inverting Mux", "IN3L", "IN3L" },
{ "Right Capture Mux", "IN1R", "IN1R" },
{ "Right Capture Mux", "IN2R", "IN2R" },
{ "Right Capture Mux", "IN3R", "IN3R" },
{ "Right Capture Inverting Mux", "IN1R", "IN1R" },
{ "Right Capture Inverting Mux", "IN2R", "IN2R" },
{ "Right Capture Inverting Mux", "IN3R", "IN3R" },
{ "Left Capture PGA", NULL, "Left Capture Mux" },
{ "Left Capture PGA", NULL, "Left Capture Inverting Mux" },
{ "Right Capture PGA", NULL, "Right Capture Mux" },
{ "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
{ "AIFOUTL", "Left", "ADCL" },
{ "AIFOUTL", "Right", "ADCR" },
{ "AIFOUTR", "Left", "ADCL" },
{ "AIFOUTR", "Right", "ADCR" },
{ "ADCL", NULL, "CLK_DSP" },
{ "ADCL", NULL, "Left Capture PGA" },
{ "ADCR", NULL, "CLK_DSP" },
{ "ADCR", NULL, "Right Capture PGA" },
};
static const struct snd_soc_dapm_route dac_intercon[] = {
{ "DACL", "Right", "AIFINR" },
{ "DACL", "Left", "AIFINL" },
{ "DACL", NULL, "CLK_DSP" },
{ "DACR", "Right", "AIFINR" },
{ "DACR", "Left", "AIFINL" },
{ "DACR", NULL, "CLK_DSP" },
{ "Charge pump", NULL, "SYSCLK" },
{ "Headphone Output", NULL, "HPL PGA" },
{ "Headphone Output", NULL, "HPR PGA" },
{ "Headphone Output", NULL, "Charge pump" },
{ "Headphone Output", NULL, "TOCLK" },
{ "Line Output", NULL, "LINEL PGA" },
{ "Line Output", NULL, "LINER PGA" },
{ "Line Output", NULL, "Charge pump" },
{ "Line Output", NULL, "TOCLK" },
{ "HPOUTL", NULL, "Headphone Output" },
{ "HPOUTR", NULL, "Headphone Output" },
{ "LINEOUTL", NULL, "Line Output" },
{ "LINEOUTR", NULL, "Line Output" },
};
static const struct snd_soc_dapm_route wm8904_intercon[] = {
{ "Left Sidetone", "Left", "ADCL" },
{ "Left Sidetone", "Right", "ADCR" },
{ "DACL", NULL, "Left Sidetone" },
{ "Right Sidetone", "Left", "ADCL" },
{ "Right Sidetone", "Right", "ADCR" },
{ "DACR", NULL, "Right Sidetone" },
{ "Left Bypass", NULL, "Class G" },
{ "Left Bypass", NULL, "Left Capture PGA" },
{ "Right Bypass", NULL, "Class G" },
{ "Right Bypass", NULL, "Right Capture PGA" },
{ "HPL Mux", "DAC", "DACL" },
{ "HPL Mux", "Bypass", "Left Bypass" },
{ "HPR Mux", "DAC", "DACR" },
{ "HPR Mux", "Bypass", "Right Bypass" },
{ "LINEL Mux", "DAC", "DACL" },
{ "LINEL Mux", "Bypass", "Left Bypass" },
{ "LINER Mux", "DAC", "DACR" },
{ "LINER Mux", "Bypass", "Right Bypass" },
{ "HPL PGA", NULL, "HPL Mux" },
{ "HPR PGA", NULL, "HPR Mux" },
{ "LINEL PGA", NULL, "LINEL Mux" },
{ "LINER PGA", NULL, "LINER Mux" },
};
static const struct snd_soc_dapm_route wm8912_intercon[] = {
{ "HPL PGA", NULL, "DACL" },
{ "HPR PGA", NULL, "DACR" },
{ "LINEL PGA", NULL, "DACL" },
{ "LINER PGA", NULL, "DACR" },
};
static int wm8904_add_widgets(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
snd_soc_dapm_new_controls(codec, wm8904_core_dapm_widgets,
ARRAY_SIZE(wm8904_core_dapm_widgets));
snd_soc_dapm_add_routes(codec, core_intercon,
ARRAY_SIZE(core_intercon));
switch (wm8904->devtype) {
case WM8904:
snd_soc_add_controls(codec, wm8904_adc_snd_controls,
ARRAY_SIZE(wm8904_adc_snd_controls));
snd_soc_add_controls(codec, wm8904_dac_snd_controls,
ARRAY_SIZE(wm8904_dac_snd_controls));
snd_soc_add_controls(codec, wm8904_snd_controls,
ARRAY_SIZE(wm8904_snd_controls));
snd_soc_dapm_new_controls(codec, wm8904_adc_dapm_widgets,
ARRAY_SIZE(wm8904_adc_dapm_widgets));
snd_soc_dapm_new_controls(codec, wm8904_dac_dapm_widgets,
ARRAY_SIZE(wm8904_dac_dapm_widgets));
snd_soc_dapm_new_controls(codec, wm8904_dapm_widgets,
ARRAY_SIZE(wm8904_dapm_widgets));
snd_soc_dapm_add_routes(codec, core_intercon,
ARRAY_SIZE(core_intercon));
snd_soc_dapm_add_routes(codec, adc_intercon,
ARRAY_SIZE(adc_intercon));
snd_soc_dapm_add_routes(codec, dac_intercon,
ARRAY_SIZE(dac_intercon));
snd_soc_dapm_add_routes(codec, wm8904_intercon,
ARRAY_SIZE(wm8904_intercon));
break;
case WM8912:
snd_soc_add_controls(codec, wm8904_dac_snd_controls,
ARRAY_SIZE(wm8904_dac_snd_controls));
snd_soc_dapm_new_controls(codec, wm8904_dac_dapm_widgets,
ARRAY_SIZE(wm8904_dac_dapm_widgets));
snd_soc_dapm_add_routes(codec, dac_intercon,
ARRAY_SIZE(dac_intercon));
snd_soc_dapm_add_routes(codec, wm8912_intercon,
ARRAY_SIZE(wm8912_intercon));
break;
}
snd_soc_dapm_new_widgets(codec);
return 0;
}
static struct {
int ratio;
unsigned int clk_sys_rate;
} clk_sys_rates[] = {
{ 64, 0 },
{ 128, 1 },
{ 192, 2 },
{ 256, 3 },
{ 384, 4 },
{ 512, 5 },
{ 786, 6 },
{ 1024, 7 },
{ 1408, 8 },
{ 1536, 9 },
};
static struct {
int rate;
int sample_rate;
} sample_rates[] = {
{ 8000, 0 },
{ 11025, 1 },
{ 12000, 1 },
{ 16000, 2 },
{ 22050, 3 },
{ 24000, 3 },
{ 32000, 4 },
{ 44100, 5 },
{ 48000, 5 },
};
static struct {
int div; /* *10 due to .5s */
int bclk_div;
} bclk_divs[] = {
{ 10, 0 },
{ 15, 1 },
{ 20, 2 },
{ 30, 3 },
{ 40, 4 },
{ 50, 5 },
{ 55, 6 },
{ 60, 7 },
{ 80, 8 },
{ 100, 9 },
{ 110, 10 },
{ 120, 11 },
{ 160, 12 },
{ 200, 13 },
{ 220, 14 },
{ 240, 16 },
{ 200, 17 },
{ 320, 18 },
{ 440, 19 },
{ 480, 20 },
};
static int wm8904_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8904_priv *wm8904 = codec->private_data;
int ret, i, best, best_val, cur_val;
unsigned int aif1 = 0;
unsigned int aif2 = 0;
unsigned int aif3 = 0;
unsigned int clock1 = 0;
unsigned int dac_digital1 = 0;
/* What BCLK do we need? */
wm8904->fs = params_rate(params);
if (wm8904->tdm_slots) {
dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
wm8904->tdm_slots, wm8904->tdm_width);
wm8904->bclk = snd_soc_calc_bclk(wm8904->fs,
wm8904->tdm_width, 2,
wm8904->tdm_slots);
} else {
wm8904->bclk = snd_soc_params_to_bclk(params);
}
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
aif1 |= 0x40;
break;
case SNDRV_PCM_FORMAT_S24_LE:
aif1 |= 0x80;
break;
case SNDRV_PCM_FORMAT_S32_LE:
aif1 |= 0xc0;
break;
default:
return -EINVAL;
}
dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8904->bclk);
ret = wm8904_configure_clocking(codec);
if (ret != 0)
return ret;
/* Select nearest CLK_SYS_RATE */
best = 0;
best_val = abs((wm8904->sysclk_rate / clk_sys_rates[0].ratio)
- wm8904->fs);
for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
cur_val = abs((wm8904->sysclk_rate /
clk_sys_rates[i].ratio) - wm8904->fs);;
if (cur_val < best_val) {
best = i;
best_val = cur_val;
}
}
dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
clk_sys_rates[best].ratio);
clock1 |= (clk_sys_rates[best].clk_sys_rate
<< WM8904_CLK_SYS_RATE_SHIFT);
/* SAMPLE_RATE */
best = 0;
best_val = abs(wm8904->fs - sample_rates[0].rate);
for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
/* Closest match */
cur_val = abs(wm8904->fs - sample_rates[i].rate);
if (cur_val < best_val) {
best = i;
best_val = cur_val;
}
}
dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
sample_rates[best].rate);
clock1 |= (sample_rates[best].sample_rate
<< WM8904_SAMPLE_RATE_SHIFT);
/* Enable sloping stopband filter for low sample rates */
if (wm8904->fs <= 24000)
dac_digital1 |= WM8904_DAC_SB_FILT;
/* BCLK_DIV */
best = 0;
best_val = INT_MAX;
for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
cur_val = ((wm8904->sysclk_rate * 10) / bclk_divs[i].div)
- wm8904->bclk;
if (cur_val < 0) /* Table is sorted */
break;
if (cur_val < best_val) {
best = i;
best_val = cur_val;
}
}
wm8904->bclk = (wm8904->sysclk_rate * 10) / bclk_divs[best].div;
dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
bclk_divs[best].div, wm8904->bclk);
aif2 |= bclk_divs[best].bclk_div;
/* LRCLK is a simple fraction of BCLK */
dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8904->bclk / wm8904->fs);
aif3 |= wm8904->bclk / wm8904->fs;
/* Apply the settings */
snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
WM8904_DAC_SB_FILT, dac_digital1);
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
WM8904_AIF_WL_MASK, aif1);
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_2,
WM8904_BCLK_DIV_MASK, aif2);
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
WM8904_LRCLK_RATE_MASK, aif3);
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_1,
WM8904_SAMPLE_RATE_MASK |
WM8904_CLK_SYS_RATE_MASK, clock1);
/* Update filters for the new settings */
wm8904_set_retune_mobile(codec);
wm8904_set_deemph(codec);
return 0;
}
static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8904_priv *priv = codec->private_data;
switch (clk_id) {
case WM8904_CLK_MCLK:
priv->sysclk_src = clk_id;
priv->mclk_rate = freq;
break;
case WM8904_CLK_FLL:
priv->sysclk_src = clk_id;
break;
default:
return -EINVAL;
}
dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
wm8904_configure_clocking(codec);
return 0;
}
static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_codec *codec = dai->codec;
unsigned int aif1 = 0;
unsigned int aif3 = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
break;
case SND_SOC_DAIFMT_CBS_CFM:
aif3 |= WM8904_LRCLK_DIR;
break;
case SND_SOC_DAIFMT_CBM_CFS:
aif1 |= WM8904_BCLK_DIR;
break;
case SND_SOC_DAIFMT_CBM_CFM:
aif1 |= WM8904_BCLK_DIR;
aif3 |= WM8904_LRCLK_DIR;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_B:
aif1 |= WM8904_AIF_LRCLK_INV;
case SND_SOC_DAIFMT_DSP_A:
aif1 |= 0x3;
break;
case SND_SOC_DAIFMT_I2S:
aif1 |= 0x2;
break;
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
aif1 |= 0x1;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_A:
case SND_SOC_DAIFMT_DSP_B:
/* frame inversion not valid for DSP modes */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
aif1 |= WM8904_AIF_BCLK_INV;
break;
default:
return -EINVAL;
}
break;
case SND_SOC_DAIFMT_I2S:
case SND_SOC_DAIFMT_RIGHT_J:
case SND_SOC_DAIFMT_LEFT_J:
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
aif1 |= WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV;
break;
case SND_SOC_DAIFMT_IB_NF:
aif1 |= WM8904_AIF_BCLK_INV;
break;
case SND_SOC_DAIFMT_NB_IF:
aif1 |= WM8904_AIF_LRCLK_INV;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV |
WM8904_AIF_FMT_MASK | WM8904_BCLK_DIR, aif1);
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
WM8904_LRCLK_DIR, aif3);
return 0;
}
static int wm8904_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
unsigned int rx_mask, int slots, int slot_width)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8904_priv *wm8904 = codec->private_data;
int aif1 = 0;
/* Don't need to validate anything if we're turning off TDM */
if (slots == 0)
goto out;
/* Note that we allow configurations we can't handle ourselves -
* for example, we can generate clocks for slots 2 and up even if
* we can't use those slots ourselves.
*/
aif1 |= WM8904_AIFADC_TDM | WM8904_AIFDAC_TDM;
switch (rx_mask) {
case 3:
break;
case 0xc:
aif1 |= WM8904_AIFADC_TDM_CHAN;
break;
default:
return -EINVAL;
}
switch (tx_mask) {
case 3:
break;
case 0xc:
aif1 |= WM8904_AIFDAC_TDM_CHAN;
break;
default:
return -EINVAL;
}
out:
wm8904->tdm_width = slot_width;
wm8904->tdm_slots = slots / 2;
snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
WM8904_AIFADC_TDM | WM8904_AIFADC_TDM_CHAN |
WM8904_AIFDAC_TDM | WM8904_AIFDAC_TDM_CHAN, aif1);
return 0;
}
struct _fll_div {
u16 fll_fratio;
u16 fll_outdiv;
u16 fll_clk_ref_div;
u16 n;
u16 k;
};
/* The size in bits of the FLL divide multiplied by 10
* to allow rounding later */
#define FIXED_FLL_SIZE ((1 << 16) * 10)
static struct {
unsigned int min;
unsigned int max;
u16 fll_fratio;
int ratio;
} fll_fratios[] = {
{ 0, 64000, 4, 16 },
{ 64000, 128000, 3, 8 },
{ 128000, 256000, 2, 4 },
{ 256000, 1000000, 1, 2 },
{ 1000000, 13500000, 0, 1 },
};
static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
unsigned int Fout)
{
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
unsigned int div;
int i;
/* Fref must be <=13.5MHz */
div = 1;
fll_div->fll_clk_ref_div = 0;
while ((Fref / div) > 13500000) {
div *= 2;
fll_div->fll_clk_ref_div++;
if (div > 8) {
pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
Fref);
return -EINVAL;
}
}
pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
/* Apply the division for our remaining calculations */
Fref /= div;
/* Fvco should be 90-100MHz; don't check the upper bound */
div = 4;
while (Fout * div < 90000000) {
div++;
if (div > 64) {
pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
Fout);
return -EINVAL;
}
}
target = Fout * div;
fll_div->fll_outdiv = div - 1;
pr_debug("Fvco=%dHz\n", target);
/* Find an appropraite FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
target /= fll_fratios[i].ratio;
break;
}
}
if (i == ARRAY_SIZE(fll_fratios)) {
pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
return -EINVAL;
}
/* Now, calculate N.K */
Ndiv = target / Fref;
fll_div->n = Ndiv;
Nmod = target % Fref;
pr_debug("Nmod=%d\n", Nmod);
/* Calculate fractional part - scale up so we can round. */
Kpart = FIXED_FLL_SIZE * (long long)Nmod;
do_div(Kpart, Fref);
K = Kpart & 0xFFFFFFFF;
if ((K % 10) >= 5)
K += 5;
/* Move down to proper range now rounding is done */
fll_div->k = K / 10;
pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
fll_div->n, fll_div->k,
fll_div->fll_fratio, fll_div->fll_outdiv,
fll_div->fll_clk_ref_div);
return 0;
}
static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
unsigned int Fref, unsigned int Fout)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8904_priv *wm8904 = codec->private_data;
struct _fll_div fll_div;
int ret, val;
int clock2, fll1;
/* Any change? */
if (source == wm8904->fll_src && Fref == wm8904->fll_fref &&
Fout == wm8904->fll_fout)
return 0;
clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
if (Fout == 0) {
dev_dbg(codec->dev, "FLL disabled\n");
wm8904->fll_fref = 0;
wm8904->fll_fout = 0;
/* Gate SYSCLK to avoid glitches */
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
WM8904_CLK_SYS_ENA, 0);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
goto out;
}
/* Validate the FLL ID */
switch (source) {
case WM8904_FLL_MCLK:
case WM8904_FLL_LRCLK:
case WM8904_FLL_BCLK:
ret = fll_factors(&fll_div, Fref, Fout);
if (ret != 0)
return ret;
break;
case WM8904_FLL_FREE_RUNNING:
dev_dbg(codec->dev, "Using free running FLL\n");
/* Force 12MHz and output/4 for now */
Fout = 12000000;
Fref = 12000000;
memset(&fll_div, 0, sizeof(fll_div));
fll_div.fll_outdiv = 3;
break;
default:
dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
return -EINVAL;
}
/* Save current state then disable the FLL and SYSCLK to avoid
* misclocking */
fll1 = snd_soc_read(codec, WM8904_FLL_CONTROL_1);
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
WM8904_CLK_SYS_ENA, 0);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
/* Unlock forced oscilator control to switch it on/off */
snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
WM8904_USER_KEY, WM8904_USER_KEY);
if (fll_id == WM8904_FLL_FREE_RUNNING) {
val = WM8904_FLL_FRC_NCO;
} else {
val = 0;
}
snd_soc_update_bits(codec, WM8904_FLL_NCO_TEST_1, WM8904_FLL_FRC_NCO,
val);
snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
WM8904_USER_KEY, 0);
switch (fll_id) {
case WM8904_FLL_MCLK:
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
WM8904_FLL_CLK_REF_SRC_MASK, 0);
break;
case WM8904_FLL_LRCLK:
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
WM8904_FLL_CLK_REF_SRC_MASK, 1);
break;
case WM8904_FLL_BCLK:
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
WM8904_FLL_CLK_REF_SRC_MASK, 2);
break;
}
if (fll_div.k)
val = WM8904_FLL_FRACN_ENA;
else
val = 0;
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_FRACN_ENA, val);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_2,
WM8904_FLL_OUTDIV_MASK | WM8904_FLL_FRATIO_MASK,
(fll_div.fll_outdiv << WM8904_FLL_OUTDIV_SHIFT) |
(fll_div.fll_fratio << WM8904_FLL_FRATIO_SHIFT));
snd_soc_write(codec, WM8904_FLL_CONTROL_3, fll_div.k);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_4, WM8904_FLL_N_MASK,
fll_div.n << WM8904_FLL_N_SHIFT);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
WM8904_FLL_CLK_REF_DIV_MASK,
fll_div.fll_clk_ref_div
<< WM8904_FLL_CLK_REF_DIV_SHIFT);
dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
wm8904->fll_fref = Fref;
wm8904->fll_fout = Fout;
wm8904->fll_src = source;
/* Enable the FLL if it was previously active */
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_OSC_ENA, fll1);
snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
WM8904_FLL_ENA, fll1);
out:
/* Reenable SYSCLK if it was previously active */
snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
WM8904_CLK_SYS_ENA, clock2);
return 0;
}
static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_codec *codec = codec_dai->codec;
int val;
if (mute)
val = WM8904_DAC_MUTE;
else
val = 0;
snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1, WM8904_DAC_MUTE, val);
return 0;
}
static void wm8904_sync_cache(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = codec->private_data;
int i;
if (!codec->cache_sync)
return;
codec->cache_only = 0;
/* Sync back cached values if they're different from the
* hardware default.
*/
for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
if (!wm8904_access[i].writable)
continue;
if (wm8904->reg_cache[i] == wm8904_reg[i])
continue;
snd_soc_write(codec, i, wm8904->reg_cache[i]);
}
codec->cache_sync = 0;
}
static int wm8904_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8904_priv *wm8904 = codec->private_data;
int ret;
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID resistance 2*50k */
snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
WM8904_VMID_RES_MASK,
0x1 << WM8904_VMID_RES_SHIFT);
/* Normal bias current */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_ISEL_MASK, 2 << WM8904_ISEL_SHIFT);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
if (ret != 0) {
dev_err(codec->dev,
"Failed to enable supplies: %d\n",
ret);
return ret;
}
wm8904_sync_cache(codec);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, WM8904_BIAS_ENA);
/* Enable VMID, VMID buffering, 2*5k resistance */
snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
WM8904_VMID_ENA |
WM8904_VMID_RES_MASK,
WM8904_VMID_ENA |
0x3 << WM8904_VMID_RES_SHIFT);
/* Let VMID ramp */
msleep(1);
}
/* Maintain VMID with 2*250k */
snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
WM8904_VMID_RES_MASK,
0x2 << WM8904_VMID_RES_SHIFT);
/* Bias current *0.5 */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_ISEL_MASK, 0);
break;
case SND_SOC_BIAS_OFF:
/* Turn off VMID */
snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
WM8904_VMID_RES_MASK | WM8904_VMID_ENA, 0);
/* Stop bias generation */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
#ifdef CONFIG_REGULATOR
/* Post 2.6.34 we will be able to get a callback when
* the regulators are disabled which we can use but
* for now just assume that the power will be cut if
* the regulator API is in use.
*/
codec->cache_sync = 1;
#endif
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
break;
}
codec->bias_level = level;
return 0;
}
#define WM8904_RATES SNDRV_PCM_RATE_8000_96000
#define WM8904_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
static struct snd_soc_dai_ops wm8904_dai_ops = {
.set_sysclk = wm8904_set_sysclk,
.set_fmt = wm8904_set_fmt,
.set_tdm_slot = wm8904_set_tdm_slot,
.set_pll = wm8904_set_fll,
.hw_params = wm8904_hw_params,
.digital_mute = wm8904_digital_mute,
};
struct snd_soc_dai wm8904_dai = {
.name = "WM8904",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = WM8904_RATES,
.formats = WM8904_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = WM8904_RATES,
.formats = WM8904_FORMATS,
},
.ops = &wm8904_dai_ops,
.symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8904_dai);
#ifdef CONFIG_PM
static int wm8904_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
static int wm8904_resume(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
#else
#define wm8904_suspend NULL
#define wm8904_resume NULL
#endif
static void wm8904_handle_retune_mobile_pdata(struct wm8904_priv *wm8904)
{
struct snd_soc_codec *codec = &wm8904->codec;
struct wm8904_pdata *pdata = wm8904->pdata;
struct snd_kcontrol_new control =
SOC_ENUM_EXT("EQ Mode",
wm8904->retune_mobile_enum,
wm8904_get_retune_mobile_enum,
wm8904_put_retune_mobile_enum);
int ret, i, j;
const char **t;
/* We need an array of texts for the enum API but the number
* of texts is likely to be less than the number of
* configurations due to the sample rate dependency of the
* configurations. */
wm8904->num_retune_mobile_texts = 0;
wm8904->retune_mobile_texts = NULL;
for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
for (j = 0; j < wm8904->num_retune_mobile_texts; j++) {
if (strcmp(pdata->retune_mobile_cfgs[i].name,
wm8904->retune_mobile_texts[j]) == 0)
break;
}
if (j != wm8904->num_retune_mobile_texts)
continue;
/* Expand the array... */
t = krealloc(wm8904->retune_mobile_texts,
sizeof(char *) *
(wm8904->num_retune_mobile_texts + 1),
GFP_KERNEL);
if (t == NULL)
continue;
/* ...store the new entry... */
t[wm8904->num_retune_mobile_texts] =
pdata->retune_mobile_cfgs[i].name;
/* ...and remember the new version. */
wm8904->num_retune_mobile_texts++;
wm8904->retune_mobile_texts = t;
}
dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
wm8904->num_retune_mobile_texts);
wm8904->retune_mobile_enum.max = wm8904->num_retune_mobile_texts;
wm8904->retune_mobile_enum.texts = wm8904->retune_mobile_texts;
ret = snd_soc_add_controls(&wm8904->codec, &control, 1);
if (ret != 0)
dev_err(wm8904->codec.dev,
"Failed to add ReTune Mobile control: %d\n", ret);
}
static void wm8904_handle_pdata(struct wm8904_priv *wm8904)
{
struct snd_soc_codec *codec = &wm8904->codec;
struct wm8904_pdata *pdata = wm8904->pdata;
int ret, i;
if (!pdata) {
snd_soc_add_controls(&wm8904->codec, wm8904_eq_controls,
ARRAY_SIZE(wm8904_eq_controls));
return;
}
dev_dbg(codec->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
if (pdata->num_drc_cfgs) {
struct snd_kcontrol_new control =
SOC_ENUM_EXT("DRC Mode", wm8904->drc_enum,
wm8904_get_drc_enum, wm8904_put_drc_enum);
/* We need an array of texts for the enum API */
wm8904->drc_texts = kmalloc(sizeof(char *)
* pdata->num_drc_cfgs, GFP_KERNEL);
if (!wm8904->drc_texts) {
dev_err(wm8904->codec.dev,
"Failed to allocate %d DRC config texts\n",
pdata->num_drc_cfgs);
return;
}
for (i = 0; i < pdata->num_drc_cfgs; i++)
wm8904->drc_texts[i] = pdata->drc_cfgs[i].name;
wm8904->drc_enum.max = pdata->num_drc_cfgs;
wm8904->drc_enum.texts = wm8904->drc_texts;
ret = snd_soc_add_controls(&wm8904->codec, &control, 1);
if (ret != 0)
dev_err(wm8904->codec.dev,
"Failed to add DRC mode control: %d\n", ret);
wm8904_set_drc(codec);
}
dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
pdata->num_retune_mobile_cfgs);
if (pdata->num_retune_mobile_cfgs)
wm8904_handle_retune_mobile_pdata(wm8904);
else
snd_soc_add_controls(&wm8904->codec, wm8904_eq_controls,
ARRAY_SIZE(wm8904_eq_controls));
}
static int wm8904_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
int ret = 0;
if (wm8904_codec == NULL) {
dev_err(&pdev->dev, "Codec device not registered\n");
return -ENODEV;
}
socdev->card->codec = wm8904_codec;
codec = wm8904_codec;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
dev_err(codec->dev, "failed to create pcms: %d\n", ret);
goto pcm_err;
}
wm8904_handle_pdata(codec->private_data);
wm8904_add_widgets(codec);
return ret;
pcm_err:
return ret;
}
static int wm8904_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
return 0;
}
struct snd_soc_codec_device soc_codec_dev_wm8904 = {
.probe = wm8904_probe,
.remove = wm8904_remove,
.suspend = wm8904_suspend,
.resume = wm8904_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8904);
static int wm8904_register(struct wm8904_priv *wm8904,
enum snd_soc_control_type control)
{
int ret;
struct snd_soc_codec *codec = &wm8904->codec;
int i;
if (wm8904_codec) {
dev_err(codec->dev, "Another WM8904 is registered\n");
return -EINVAL;
}
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
codec->private_data = wm8904;
codec->name = "WM8904";
codec->owner = THIS_MODULE;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8904_set_bias_level;
codec->dai = &wm8904_dai;
codec->num_dai = 1;
codec->reg_cache_size = WM8904_MAX_REGISTER;
codec->reg_cache = &wm8904->reg_cache;
codec->volatile_register = wm8904_volatile_register;
codec->cache_sync = 1;
codec->idle_bias_off = 1;
switch (wm8904->devtype) {
case WM8904:
break;
case WM8912:
memset(&wm8904_dai.capture, 0, sizeof(wm8904_dai.capture));
break;
default:
dev_err(codec->dev, "Unknown device type %d\n",
wm8904->devtype);
return -EINVAL;
}
memcpy(codec->reg_cache, wm8904_reg, sizeof(wm8904_reg));
ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
goto err;
}
for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
wm8904->supplies[i].supply = wm8904_supply_names[i];
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
goto err;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
goto err_get;
}
ret = snd_soc_read(codec, WM8904_SW_RESET_AND_ID);
if (ret < 0) {
dev_err(codec->dev, "Failed to read ID register\n");
goto err_enable;
}
if (ret != wm8904_reg[WM8904_SW_RESET_AND_ID]) {
dev_err(codec->dev, "Device is not a WM8904, ID is %x\n", ret);
ret = -EINVAL;
goto err_enable;
}
ret = snd_soc_read(codec, WM8904_REVISION);
if (ret < 0) {
dev_err(codec->dev, "Failed to read device revision: %d\n",
ret);
goto err_enable;
}
dev_info(codec->dev, "revision %c\n", ret + 'A');
ret = wm8904_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
goto err_enable;
}
wm8904_dai.dev = codec->dev;
/* Change some default settings - latch VU and enable ZC */
wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
WM8904_HPOUTLZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
WM8904_HPOUTRZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTLZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTRZC;
wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
/* Set Class W by default - this will be managed by the Class
* G widget at runtime where bypass paths are available.
*/
wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
/* Use normal bias source */
wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Bias level configuration will have done an extra enable */
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
wm8904_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
return ret;
}
ret = snd_soc_register_dai(&wm8904_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
return ret;
}
return 0;
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
err:
kfree(wm8904);
return ret;
}
static void wm8904_unregister(struct wm8904_priv *wm8904)
{
wm8904_set_bias_level(&wm8904->codec, SND_SOC_BIAS_OFF);
regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
snd_soc_unregister_dai(&wm8904_dai);
snd_soc_unregister_codec(&wm8904->codec);
kfree(wm8904);
wm8904_codec = NULL;
}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8904_priv *wm8904;
struct snd_soc_codec *codec;
wm8904 = kzalloc(sizeof(struct wm8904_priv), GFP_KERNEL);
if (wm8904 == NULL)
return -ENOMEM;
codec = &wm8904->codec;
codec->hw_write = (hw_write_t)i2c_master_send;
wm8904->devtype = id->driver_data;
i2c_set_clientdata(i2c, wm8904);
codec->control_data = i2c;
wm8904->pdata = i2c->dev.platform_data;
codec->dev = &i2c->dev;
return wm8904_register(wm8904, SND_SOC_I2C);
}
static __devexit int wm8904_i2c_remove(struct i2c_client *client)
{
struct wm8904_priv *wm8904 = i2c_get_clientdata(client);
wm8904_unregister(wm8904);
return 0;
}
static const struct i2c_device_id wm8904_i2c_id[] = {
{ "wm8904", WM8904 },
{ "wm8912", WM8912 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
static struct i2c_driver wm8904_i2c_driver = {
.driver = {
.name = "WM8904",
.owner = THIS_MODULE,
},
.probe = wm8904_i2c_probe,
.remove = __devexit_p(wm8904_i2c_remove),
.id_table = wm8904_i2c_id,
};
#endif
static int __init wm8904_modinit(void)
{
int ret;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&wm8904_i2c_driver);
if (ret != 0) {
printk(KERN_ERR "Failed to register WM8904 I2C driver: %d\n",
ret);
}
#endif
return 0;
}
module_init(wm8904_modinit);
static void __exit wm8904_exit(void)
{
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8904_i2c_driver);
#endif
}
module_exit(wm8904_exit);
MODULE_DESCRIPTION("ASoC WM8904 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");