| #ifdef CONFIG_CPU_SUP_INTEL |
| |
| /* |
| * Not sure about some of these |
| */ |
| static const u64 p6_perfmon_event_map[] = |
| { |
| [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, |
| [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, |
| [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, |
| [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, |
| }; |
| |
| static u64 p6_pmu_event_map(int hw_event) |
| { |
| return p6_perfmon_event_map[hw_event]; |
| } |
| |
| /* |
| * Event setting that is specified not to count anything. |
| * We use this to effectively disable a counter. |
| * |
| * L2_RQSTS with 0 MESI unit mask. |
| */ |
| #define P6_NOP_EVENT 0x0000002EULL |
| |
| static u64 p6_pmu_raw_event(u64 hw_event) |
| { |
| #define P6_EVNTSEL_EVENT_MASK 0x000000FFULL |
| #define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL |
| #define P6_EVNTSEL_EDGE_MASK 0x00040000ULL |
| #define P6_EVNTSEL_INV_MASK 0x00800000ULL |
| #define P6_EVNTSEL_REG_MASK 0xFF000000ULL |
| |
| #define P6_EVNTSEL_MASK \ |
| (P6_EVNTSEL_EVENT_MASK | \ |
| P6_EVNTSEL_UNIT_MASK | \ |
| P6_EVNTSEL_EDGE_MASK | \ |
| P6_EVNTSEL_INV_MASK | \ |
| P6_EVNTSEL_REG_MASK) |
| |
| return hw_event & P6_EVNTSEL_MASK; |
| } |
| |
| static struct event_constraint p6_event_constraints[] = |
| { |
| INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FLOPS */ |
| INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */ |
| INTEL_EVENT_CONSTRAINT(0x11, 0x1), /* FP_ASSIST */ |
| INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ |
| INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */ |
| INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */ |
| EVENT_CONSTRAINT_END |
| }; |
| |
| static void p6_pmu_disable_all(void) |
| { |
| u64 val; |
| |
| /* p6 only has one enable register */ |
| rdmsrl(MSR_P6_EVNTSEL0, val); |
| val &= ~ARCH_PERFMON_EVENTSEL_ENABLE; |
| wrmsrl(MSR_P6_EVNTSEL0, val); |
| } |
| |
| static void p6_pmu_enable_all(void) |
| { |
| unsigned long val; |
| |
| /* p6 only has one enable register */ |
| rdmsrl(MSR_P6_EVNTSEL0, val); |
| val |= ARCH_PERFMON_EVENTSEL_ENABLE; |
| wrmsrl(MSR_P6_EVNTSEL0, val); |
| } |
| |
| static inline void |
| p6_pmu_disable_event(struct perf_event *event) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| u64 val = P6_NOP_EVENT; |
| |
| if (cpuc->enabled) |
| val |= ARCH_PERFMON_EVENTSEL_ENABLE; |
| |
| (void)checking_wrmsrl(hwc->config_base + hwc->idx, val); |
| } |
| |
| static void p6_pmu_enable_event(struct perf_event *event) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| u64 val; |
| |
| val = hwc->config; |
| if (cpuc->enabled) |
| val |= ARCH_PERFMON_EVENTSEL_ENABLE; |
| |
| (void)checking_wrmsrl(hwc->config_base + hwc->idx, val); |
| } |
| |
| static __initconst struct x86_pmu p6_pmu = { |
| .name = "p6", |
| .handle_irq = x86_pmu_handle_irq, |
| .disable_all = p6_pmu_disable_all, |
| .enable_all = p6_pmu_enable_all, |
| .enable = p6_pmu_enable_event, |
| .disable = p6_pmu_disable_event, |
| .eventsel = MSR_P6_EVNTSEL0, |
| .perfctr = MSR_P6_PERFCTR0, |
| .event_map = p6_pmu_event_map, |
| .raw_event = p6_pmu_raw_event, |
| .max_events = ARRAY_SIZE(p6_perfmon_event_map), |
| .apic = 1, |
| .max_period = (1ULL << 31) - 1, |
| .version = 0, |
| .num_events = 2, |
| /* |
| * Events have 40 bits implemented. However they are designed such |
| * that bits [32-39] are sign extensions of bit 31. As such the |
| * effective width of a event for P6-like PMU is 32 bits only. |
| * |
| * See IA-32 Intel Architecture Software developer manual Vol 3B |
| */ |
| .event_bits = 32, |
| .event_mask = (1ULL << 32) - 1, |
| .get_event_constraints = x86_get_event_constraints, |
| .event_constraints = p6_event_constraints, |
| }; |
| |
| static __init int p6_pmu_init(void) |
| { |
| switch (boot_cpu_data.x86_model) { |
| case 1: |
| case 3: /* Pentium Pro */ |
| case 5: |
| case 6: /* Pentium II */ |
| case 7: |
| case 8: |
| case 11: /* Pentium III */ |
| case 9: |
| case 13: |
| /* Pentium M */ |
| break; |
| default: |
| pr_cont("unsupported p6 CPU model %d ", |
| boot_cpu_data.x86_model); |
| return -ENODEV; |
| } |
| |
| x86_pmu = p6_pmu; |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_CPU_SUP_INTEL */ |