| /* |
| * Copyright (C) 2008 Sascha Hauer, Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/init.h> |
| |
| #include <linux/platform_device.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mtd/plat-ram.h> |
| #include <linux/memory.h> |
| #include <linux/gpio.h> |
| #include <linux/smc911x.h> |
| #include <linux/interrupt.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/map.h> |
| #include <mach/common.h> |
| #include <mach/imx-uart.h> |
| #include <mach/iomux-mx3.h> |
| #include <mach/board-pcm037.h> |
| #include <mach/mxc_nand.h> |
| |
| #include "devices.h" |
| |
| static struct physmap_flash_data pcm037_flash_data = { |
| .width = 2, |
| }; |
| |
| static struct resource pcm037_flash_resource = { |
| .start = 0xa0000000, |
| .end = 0xa1ffffff, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device pcm037_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &pcm037_flash_data, |
| }, |
| .resource = &pcm037_flash_resource, |
| .num_resources = 1, |
| }; |
| |
| static struct imxuart_platform_data uart_pdata = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static struct resource smc911x_resources[] = { |
| [0] = { |
| .start = CS1_BASE_ADDR + 0x300, |
| .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), |
| .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct smc911x_platdata smc911x_info = { |
| .flags = SMC911X_USE_32BIT, |
| .irq_flags = IRQF_SHARED | IRQF_TRIGGER_LOW, |
| }; |
| |
| static struct platform_device pcm037_eth = { |
| .name = "smc911x", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(smc911x_resources), |
| .resource = smc911x_resources, |
| .dev = { |
| .platform_data = &smc911x_info, |
| }, |
| }; |
| |
| static struct platdata_mtd_ram pcm038_sram_data = { |
| .bankwidth = 2, |
| }; |
| |
| static struct resource pcm038_sram_resource = { |
| .start = CS4_BASE_ADDR, |
| .end = CS4_BASE_ADDR + 512 * 1024 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device pcm037_sram_device = { |
| .name = "mtd-ram", |
| .id = 0, |
| .dev = { |
| .platform_data = &pcm038_sram_data, |
| }, |
| .num_resources = 1, |
| .resource = &pcm038_sram_resource, |
| }; |
| |
| static struct mxc_nand_platform_data pcm037_nand_board_info = { |
| .width = 1, |
| .hw_ecc = 1, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &pcm037_flash, |
| &pcm037_eth, |
| &pcm037_sram_device, |
| }; |
| |
| /* |
| * Board specific initialization. |
| */ |
| static void __init mxc_board_init(void) |
| { |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| |
| mxc_iomux_mode(MX31_PIN_CTS1__CTS1); |
| mxc_iomux_mode(MX31_PIN_RTS1__RTS1); |
| mxc_iomux_mode(MX31_PIN_TXD1__TXD1); |
| mxc_iomux_mode(MX31_PIN_RXD1__RXD1); |
| |
| mxc_register_device(&mxc_uart_device0, &uart_pdata); |
| |
| mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3); |
| mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3); |
| |
| mxc_register_device(&mxc_uart_device2, &uart_pdata); |
| |
| mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE); |
| mxc_register_device(&mxc_w1_master_device, NULL); |
| |
| /* SMSC9215 IRQ pin */ |
| mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)); |
| if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth")) |
| gpio_direction_input(MX31_PIN_GPIO3_1); |
| |
| mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); |
| } |
| |
| /* |
| * This structure defines static mappings for the pcm037 board. |
| */ |
| static struct map_desc pcm037_io_desc[] __initdata = { |
| { |
| .virtual = AIPS1_BASE_ADDR_VIRT, |
| .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), |
| .length = AIPS1_SIZE, |
| .type = MT_DEVICE_NONSHARED |
| }, { |
| .virtual = AIPS2_BASE_ADDR_VIRT, |
| .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), |
| .length = AIPS2_SIZE, |
| .type = MT_DEVICE_NONSHARED |
| }, |
| }; |
| |
| /* |
| * Set up static virtual mappings. |
| */ |
| void __init pcm037_map_io(void) |
| { |
| mxc_map_io(); |
| iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc)); |
| } |
| |
| static void __init pcm037_timer_init(void) |
| { |
| mxc_clocks_init(26000000); |
| mxc_timer_init("ipg_clk.0"); |
| } |
| |
| struct sys_timer pcm037_timer = { |
| .init = pcm037_timer_init, |
| }; |
| |
| MACHINE_START(PCM037, "Phytec Phycore pcm037") |
| /* Maintainer: Pengutronix */ |
| .phys_io = AIPS1_BASE_ADDR, |
| .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, |
| .boot_params = PHYS_OFFSET + 0x100, |
| .map_io = pcm037_map_io, |
| .init_irq = mxc_init_irq, |
| .init_machine = mxc_board_init, |
| .timer = &pcm037_timer, |
| MACHINE_END |
| |