| /* spinlock.h: 32-bit Sparc spinlock support. |
| * |
| * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) |
| */ |
| |
| #ifndef __SPARC_SPINLOCK_H |
| #define __SPARC_SPINLOCK_H |
| |
| #include <linux/threads.h> /* For NR_CPUS */ |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <asm/psr.h> |
| |
| #define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0) |
| |
| #define __raw_spin_unlock_wait(lock) \ |
| do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) |
| |
| extern __inline__ void __raw_spin_lock(raw_spinlock_t *lock) |
| { |
| __asm__ __volatile__( |
| "\n1:\n\t" |
| "ldstub [%0], %%g2\n\t" |
| "orcc %%g2, 0x0, %%g0\n\t" |
| "bne,a 2f\n\t" |
| " ldub [%0], %%g2\n\t" |
| ".subsection 2\n" |
| "2:\n\t" |
| "orcc %%g2, 0x0, %%g0\n\t" |
| "bne,a 2b\n\t" |
| " ldub [%0], %%g2\n\t" |
| "b,a 1b\n\t" |
| ".previous\n" |
| : /* no outputs */ |
| : "r" (lock) |
| : "g2", "memory", "cc"); |
| } |
| |
| extern __inline__ int __raw_spin_trylock(raw_spinlock_t *lock) |
| { |
| unsigned int result; |
| __asm__ __volatile__("ldstub [%1], %0" |
| : "=r" (result) |
| : "r" (lock) |
| : "memory"); |
| return (result == 0); |
| } |
| |
| extern __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) |
| { |
| __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory"); |
| } |
| |
| /* Read-write spinlocks, allowing multiple readers |
| * but only one writer. |
| * |
| * NOTE! it is quite common to have readers in interrupts |
| * but no interrupt writers. For those circumstances we |
| * can "mix" irq-safe locks - any writer needs to get a |
| * irq-safe write-lock, but readers can get non-irqsafe |
| * read-locks. |
| * |
| * XXX This might create some problems with my dual spinlock |
| * XXX scheme, deadlocks etc. -DaveM |
| * |
| * Sort of like atomic_t's on Sparc, but even more clever. |
| * |
| * ------------------------------------ |
| * | 24-bit counter | wlock | raw_rwlock_t |
| * ------------------------------------ |
| * 31 8 7 0 |
| * |
| * wlock signifies the one writer is in or somebody is updating |
| * counter. For a writer, if he successfully acquires the wlock, |
| * but counter is non-zero, he has to release the lock and wait, |
| * till both counter and wlock are zero. |
| * |
| * Unfortunately this scheme limits us to ~16,000,000 cpus. |
| */ |
| extern __inline__ void __read_lock(raw_rwlock_t *rw) |
| { |
| register raw_rwlock_t *lp asm("g1"); |
| lp = rw; |
| __asm__ __volatile__( |
| "mov %%o7, %%g4\n\t" |
| "call ___rw_read_enter\n\t" |
| " ldstub [%%g1 + 3], %%g2\n" |
| : /* no outputs */ |
| : "r" (lp) |
| : "g2", "g4", "memory", "cc"); |
| } |
| |
| #define __raw_read_lock(lock) \ |
| do { unsigned long flags; \ |
| local_irq_save(flags); \ |
| __raw_read_lock(lock); \ |
| local_irq_restore(flags); \ |
| } while(0) |
| |
| extern __inline__ void __read_unlock(raw_rwlock_t *rw) |
| { |
| register raw_rwlock_t *lp asm("g1"); |
| lp = rw; |
| __asm__ __volatile__( |
| "mov %%o7, %%g4\n\t" |
| "call ___rw_read_exit\n\t" |
| " ldstub [%%g1 + 3], %%g2\n" |
| : /* no outputs */ |
| : "r" (lp) |
| : "g2", "g4", "memory", "cc"); |
| } |
| |
| #define __raw_read_unlock(lock) \ |
| do { unsigned long flags; \ |
| local_irq_save(flags); \ |
| __raw_read_unlock(lock); \ |
| local_irq_restore(flags); \ |
| } while(0) |
| |
| extern __inline__ void __raw_write_lock(raw_rwlock_t *rw) |
| { |
| register raw_rwlock_t *lp asm("g1"); |
| lp = rw; |
| __asm__ __volatile__( |
| "mov %%o7, %%g4\n\t" |
| "call ___rw_write_enter\n\t" |
| " ldstub [%%g1 + 3], %%g2\n" |
| : /* no outputs */ |
| : "r" (lp) |
| : "g2", "g4", "memory", "cc"); |
| } |
| |
| #define __raw_write_unlock(rw) do { (rw)->lock = 0; } while(0) |
| |
| #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) |
| |
| #endif /* !(__ASSEMBLY__) */ |
| |
| #endif /* __SPARC_SPINLOCK_H */ |