| /* |
| * Samsung DP (Display port) register interface driver. |
| * |
| * Copyright (C) 2012 Samsung Electronics Co., Ltd. |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| |
| #include <video/exynos_dp.h> |
| |
| #include "exynos_dp_core.h" |
| #include "exynos_dp_reg.h" |
| |
| #define COMMON_INT_MASK_1 (0) |
| #define COMMON_INT_MASK_2 (0) |
| #define COMMON_INT_MASK_3 (0) |
| #define COMMON_INT_MASK_4 (0) |
| #define INT_STA_MASK (0) |
| |
| void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable) |
| { |
| u32 reg; |
| |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| reg |= HDCP_VIDEO_MUTE; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| reg &= ~HDCP_VIDEO_MUTE; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| } |
| } |
| |
| void exynos_dp_stop_video(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| reg &= ~VIDEO_EN; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| } |
| |
| void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable) |
| { |
| u32 reg; |
| |
| if (enable) |
| reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 | |
| LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3; |
| else |
| reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | |
| LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; |
| |
| writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP); |
| } |
| |
| void exynos_dp_init_analog_param(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = TX_TERMINAL_CTRL_50_OHM; |
| writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_1); |
| |
| reg = SEL_24M | TX_DVDD_BIT_1_0625V; |
| writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_2); |
| |
| reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO; |
| writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3); |
| |
| reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM | |
| TX_CUR1_2X | TX_CUR_8_MA; |
| writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1); |
| |
| reg = CH3_AMP_400_MV | CH2_AMP_400_MV | |
| CH1_AMP_400_MV | CH0_AMP_400_MV; |
| writel(reg, dp->reg_base + EXYNOS_DP_TX_AMP_TUNING_CTL); |
| } |
| |
| void exynos_dp_init_interrupt(struct exynos_dp_device *dp) |
| { |
| /* Set interrupt pin assertion polarity as high */ |
| writel(INT_POL, dp->reg_base + EXYNOS_DP_INT_CTL); |
| |
| /* Clear pending regisers */ |
| writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1); |
| writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2); |
| writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3); |
| writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4); |
| writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA); |
| |
| /* 0:mask,1: unmask */ |
| writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1); |
| writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2); |
| writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3); |
| writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4); |
| writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK); |
| } |
| |
| void exynos_dp_reset(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| exynos_dp_stop_video(dp); |
| exynos_dp_enable_video_mute(dp, 0); |
| |
| reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | |
| AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | |
| HDCP_FUNC_EN_N | SW_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1); |
| |
| reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N | |
| SERDES_FIFO_FUNC_EN_N | |
| LS_CLK_DOMAIN_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| |
| udelay(20); |
| |
| exynos_dp_lane_swap(dp, 0); |
| |
| writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1); |
| writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2); |
| writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| |
| writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL); |
| writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL); |
| |
| writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L); |
| writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H); |
| |
| writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL); |
| |
| writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST); |
| |
| writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD); |
| writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN); |
| |
| writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH); |
| writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH); |
| |
| writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| |
| exynos_dp_init_analog_param(dp); |
| exynos_dp_init_interrupt(dp); |
| } |
| |
| void exynos_dp_swreset(struct exynos_dp_device *dp) |
| { |
| writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET); |
| } |
| |
| void exynos_dp_config_interrupt(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| /* 0: mask, 1: unmask */ |
| reg = COMMON_INT_MASK_1; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1); |
| |
| reg = COMMON_INT_MASK_2; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2); |
| |
| reg = COMMON_INT_MASK_3; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3); |
| |
| reg = COMMON_INT_MASK_4; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4); |
| |
| reg = INT_STA_MASK; |
| writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK); |
| } |
| |
| u32 exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL); |
| if (reg & PLL_LOCK) |
| return PLL_LOCKED; |
| else |
| return PLL_UNLOCKED; |
| } |
| |
| void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable) |
| { |
| u32 reg; |
| |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL); |
| reg |= DP_PLL_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL); |
| reg &= ~DP_PLL_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL); |
| } |
| } |
| |
| void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp, |
| enum analog_power_block block, |
| bool enable) |
| { |
| u32 reg; |
| |
| switch (block) { |
| case AUX_BLOCK: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= AUX_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~AUX_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case CH0_BLOCK: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= CH0_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~CH0_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case CH1_BLOCK: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= CH1_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~CH1_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case CH2_BLOCK: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= CH2_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~CH2_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case CH3_BLOCK: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= CH3_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~CH3_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case ANALOG_TOTAL: |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg |= DP_PHY_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD); |
| reg &= ~DP_PHY_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| case POWER_ALL: |
| if (enable) { |
| reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD | |
| CH1_PD | CH0_PD; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } else { |
| writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void exynos_dp_init_analog_func(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| int timeout_loop = 0; |
| |
| exynos_dp_set_analog_power_down(dp, POWER_ALL, 0); |
| |
| reg = PLL_LOCK_CHG; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL); |
| reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); |
| writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL); |
| |
| /* Power up PLL */ |
| if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { |
| exynos_dp_set_pll_power_down(dp, 0); |
| |
| while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { |
| timeout_loop++; |
| if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) { |
| dev_err(dp->dev, "failed to get pll lock status\n"); |
| return; |
| } |
| usleep_range(10, 20); |
| } |
| } |
| |
| /* Enable Serdes FIFO function and Link symbol clock domain module */ |
| reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N |
| | AUX_FUNC_EN_N); |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| } |
| |
| void exynos_dp_init_hpd(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = HOTPLUG_CHG | HPD_LOST | PLUG; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4); |
| |
| reg = INT_HPD; |
| writel(reg, dp->reg_base + EXYNOS_DP_INT_STA); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| reg &= ~(F_HPD | HPD_CTRL); |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| } |
| |
| void exynos_dp_reset_aux(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| /* Disable AUX channel module */ |
| reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| reg |= AUX_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| } |
| |
| void exynos_dp_init_aux(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| /* Clear inerrupts related to AUX channel */ |
| reg = RPLY_RECEIV | AUX_ERR; |
| writel(reg, dp->reg_base + EXYNOS_DP_INT_STA); |
| |
| exynos_dp_reset_aux(dp); |
| |
| /* Disable AUX transaction H/W retry */ |
| reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)| |
| AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL) ; |
| |
| /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ |
| reg = DEFER_CTRL_EN | DEFER_COUNT(1); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL); |
| |
| /* Enable AUX channel module */ |
| reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| reg &= ~AUX_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2); |
| } |
| |
| int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| if (reg & HPD_STATUS) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| void exynos_dp_enable_sw_function(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1); |
| reg &= ~SW_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1); |
| } |
| |
| int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp) |
| { |
| int reg; |
| int retval = 0; |
| |
| /* Enable AUX CH operation */ |
| reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2); |
| reg |= AUX_EN; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2); |
| |
| /* Is AUX CH command reply received? */ |
| reg = readl(dp->reg_base + EXYNOS_DP_INT_STA); |
| while (!(reg & RPLY_RECEIV)) |
| reg = readl(dp->reg_base + EXYNOS_DP_INT_STA); |
| |
| /* Clear interrupt source for AUX CH command reply */ |
| writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA); |
| |
| /* Clear interrupt source for AUX CH access error */ |
| reg = readl(dp->reg_base + EXYNOS_DP_INT_STA); |
| if (reg & AUX_ERR) { |
| writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA); |
| return -EREMOTEIO; |
| } |
| |
| /* Check AUX CH error access status */ |
| reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA); |
| if ((reg & AUX_STATUS_MASK) != 0) { |
| dev_err(dp->dev, "AUX CH error happens: %d\n\n", |
| reg & AUX_STATUS_MASK); |
| return -EREMOTEIO; |
| } |
| |
| return retval; |
| } |
| |
| int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp, |
| unsigned int reg_addr, |
| unsigned char data) |
| { |
| u32 reg; |
| int i; |
| int retval; |
| |
| for (i = 0; i < 3; i++) { |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| /* Select DPCD device address */ |
| reg = AUX_ADDR_7_0(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0); |
| reg = AUX_ADDR_15_8(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8); |
| reg = AUX_ADDR_19_16(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16); |
| |
| /* Write data buffer */ |
| reg = (unsigned int)data; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0); |
| |
| /* |
| * Set DisplayPort transaction and write 1 byte |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| |
| return retval; |
| } |
| |
| int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp, |
| unsigned int reg_addr, |
| unsigned char *data) |
| { |
| u32 reg; |
| int i; |
| int retval; |
| |
| for (i = 0; i < 10; i++) { |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| /* Select DPCD device address */ |
| reg = AUX_ADDR_7_0(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0); |
| reg = AUX_ADDR_15_8(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8); |
| reg = AUX_ADDR_19_16(reg_addr); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16); |
| |
| /* |
| * Set DisplayPort transaction and read 1 byte |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| |
| /* Read data buffer */ |
| reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0); |
| *data = (unsigned char)(reg & 0xff); |
| |
| return retval; |
| } |
| |
| int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp, |
| unsigned int reg_addr, |
| unsigned int count, |
| unsigned char data[]) |
| { |
| u32 reg; |
| unsigned int start_offset; |
| unsigned int cur_data_count; |
| unsigned int cur_data_idx; |
| int i; |
| int retval = 0; |
| |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| start_offset = 0; |
| while (start_offset < count) { |
| /* Buffer size of AUX CH is 16 * 4bytes */ |
| if ((count - start_offset) > 16) |
| cur_data_count = 16; |
| else |
| cur_data_count = count - start_offset; |
| |
| for (i = 0; i < 10; i++) { |
| /* Select DPCD device address */ |
| reg = AUX_ADDR_7_0(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0); |
| reg = AUX_ADDR_15_8(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8); |
| reg = AUX_ADDR_19_16(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16); |
| |
| for (cur_data_idx = 0; cur_data_idx < cur_data_count; |
| cur_data_idx++) { |
| reg = data[start_offset + cur_data_idx]; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0 |
| + 4 * cur_data_idx); |
| } |
| |
| /* |
| * Set DisplayPort transaction and write |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_LENGTH(cur_data_count) | |
| AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| |
| start_offset += cur_data_count; |
| } |
| |
| return retval; |
| } |
| |
| int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp, |
| unsigned int reg_addr, |
| unsigned int count, |
| unsigned char data[]) |
| { |
| u32 reg; |
| unsigned int start_offset; |
| unsigned int cur_data_count; |
| unsigned int cur_data_idx; |
| int i; |
| int retval = 0; |
| |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| start_offset = 0; |
| while (start_offset < count) { |
| /* Buffer size of AUX CH is 16 * 4bytes */ |
| if ((count - start_offset) > 16) |
| cur_data_count = 16; |
| else |
| cur_data_count = count - start_offset; |
| |
| /* AUX CH Request Transaction process */ |
| for (i = 0; i < 10; i++) { |
| /* Select DPCD device address */ |
| reg = AUX_ADDR_7_0(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0); |
| reg = AUX_ADDR_15_8(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8); |
| reg = AUX_ADDR_19_16(reg_addr + start_offset); |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16); |
| |
| /* |
| * Set DisplayPort transaction and read |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_LENGTH(cur_data_count) | |
| AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| |
| for (cur_data_idx = 0; cur_data_idx < cur_data_count; |
| cur_data_idx++) { |
| reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0 |
| + 4 * cur_data_idx); |
| data[start_offset + cur_data_idx] = |
| (unsigned char)reg; |
| } |
| |
| start_offset += cur_data_count; |
| } |
| |
| return retval; |
| } |
| |
| int exynos_dp_select_i2c_device(struct exynos_dp_device *dp, |
| unsigned int device_addr, |
| unsigned int reg_addr) |
| { |
| u32 reg; |
| int retval; |
| |
| /* Set EDID device address */ |
| reg = device_addr; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0); |
| writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8); |
| writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16); |
| |
| /* Set offset from base address of EDID device */ |
| writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0); |
| |
| /* |
| * Set I2C transaction and write address |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | |
| AUX_TX_COMM_WRITE; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval != 0) |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| |
| return retval; |
| } |
| |
| int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp, |
| unsigned int device_addr, |
| unsigned int reg_addr, |
| unsigned int *data) |
| { |
| u32 reg; |
| int i; |
| int retval; |
| |
| for (i = 0; i < 10; i++) { |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| /* Select EDID device */ |
| retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr); |
| if (retval != 0) { |
| dev_err(dp->dev, "Select EDID device fail!\n"); |
| continue; |
| } |
| |
| /* |
| * Set I2C transaction and read data |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_TX_COMM_I2C_TRANSACTION | |
| AUX_TX_COMM_READ; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| |
| /* Read data */ |
| if (retval == 0) |
| *data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0); |
| |
| return retval; |
| } |
| |
| int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp, |
| unsigned int device_addr, |
| unsigned int reg_addr, |
| unsigned int count, |
| unsigned char edid[]) |
| { |
| u32 reg; |
| unsigned int i, j; |
| unsigned int cur_data_idx; |
| unsigned int defer = 0; |
| int retval = 0; |
| |
| for (i = 0; i < count; i += 16) { |
| for (j = 0; j < 100; j++) { |
| /* Clear AUX CH data buffer */ |
| reg = BUF_CLR; |
| writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL); |
| |
| /* Set normal AUX CH command */ |
| reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2); |
| reg &= ~ADDR_ONLY; |
| writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2); |
| |
| /* |
| * If Rx sends defer, Tx sends only reads |
| * request without sending addres |
| */ |
| if (!defer) |
| retval = exynos_dp_select_i2c_device(dp, |
| device_addr, reg_addr + i); |
| else |
| defer = 0; |
| |
| if (retval == 0) { |
| /* |
| * Set I2C transaction and write data |
| * If bit 3 is 1, DisplayPort transaction. |
| * If Bit 3 is 0, I2C transaction. |
| */ |
| reg = AUX_LENGTH(16) | |
| AUX_TX_COMM_I2C_TRANSACTION | |
| AUX_TX_COMM_READ; |
| writel(reg, dp->reg_base + |
| EXYNOS_DP_AUX_CH_CTL_1); |
| |
| /* Start AUX transaction */ |
| retval = exynos_dp_start_aux_transaction(dp); |
| if (retval == 0) |
| break; |
| else |
| dev_err(dp->dev, "Aux Transaction fail!\n"); |
| } |
| /* Check if Rx sends defer */ |
| reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM); |
| if (reg == AUX_RX_COMM_AUX_DEFER || |
| reg == AUX_RX_COMM_I2C_DEFER) { |
| dev_err(dp->dev, "Defer: %d\n\n", reg); |
| defer = 1; |
| } |
| } |
| |
| for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { |
| reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0 |
| + 4 * cur_data_idx); |
| edid[i + cur_data_idx] = (unsigned char)reg; |
| } |
| } |
| |
| return retval; |
| } |
| |
| void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype) |
| { |
| u32 reg; |
| |
| reg = bwtype; |
| if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS)) |
| writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET); |
| } |
| |
| void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET); |
| *bwtype = reg; |
| } |
| |
| void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count) |
| { |
| u32 reg; |
| |
| reg = count; |
| writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET); |
| } |
| |
| void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET); |
| *count = reg; |
| } |
| |
| void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable) |
| { |
| u32 reg; |
| |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| reg |= ENHANCED; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| reg &= ~ENHANCED; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| } |
| } |
| |
| void exynos_dp_set_training_pattern(struct exynos_dp_device *dp, |
| enum pattern_set pattern) |
| { |
| u32 reg; |
| |
| switch (pattern) { |
| case PRBS7: |
| reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| break; |
| case D10_2: |
| reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| break; |
| case TRAINING_PTN1: |
| reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| break; |
| case TRAINING_PTN2: |
| reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| break; |
| case DP_NONE: |
| reg = SCRAMBLING_ENABLE | |
| LINK_QUAL_PATTERN_SET_DISABLE | |
| SW_TRAINING_PATTERN_SET_NORMAL; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level) |
| { |
| u32 reg; |
| |
| reg = level << PRE_EMPHASIS_SET_SHIFT; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level) |
| { |
| u32 reg; |
| |
| reg = level << PRE_EMPHASIS_SET_SHIFT; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level) |
| { |
| u32 reg; |
| |
| reg = level << PRE_EMPHASIS_SET_SHIFT; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level) |
| { |
| u32 reg; |
| |
| reg = level << PRE_EMPHASIS_SET_SHIFT; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp, |
| u32 training_lane) |
| { |
| u32 reg; |
| |
| reg = training_lane; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp, |
| u32 training_lane) |
| { |
| u32 reg; |
| |
| reg = training_lane; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp, |
| u32 training_lane) |
| { |
| u32 reg; |
| |
| reg = training_lane; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL); |
| } |
| |
| void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp, |
| u32 training_lane) |
| { |
| u32 reg; |
| |
| reg = training_lane; |
| writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL); |
| } |
| |
| u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL); |
| return reg; |
| } |
| |
| u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL); |
| return reg; |
| } |
| |
| u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL); |
| return reg; |
| } |
| |
| u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL); |
| return reg; |
| } |
| |
| void exynos_dp_reset_macro(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST); |
| reg |= MACRO_RST; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST); |
| |
| /* 10 us is the minimum reset time. */ |
| udelay(10); |
| |
| reg &= ~MACRO_RST; |
| writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST); |
| } |
| |
| int exynos_dp_init_video(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; |
| writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1); |
| |
| reg = 0x0; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1); |
| |
| reg = CHA_CRI(4) | CHA_CTRL; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2); |
| |
| reg = 0x0; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| |
| reg = VID_HRES_TH(2) | VID_VRES_TH(0); |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8); |
| |
| return 0; |
| } |
| |
| void exynos_dp_set_video_color_format(struct exynos_dp_device *dp, |
| u32 color_depth, |
| u32 color_space, |
| u32 dynamic_range, |
| u32 ycbcr_coeff) |
| { |
| u32 reg; |
| |
| /* Configure the input color depth, color space, dynamic range */ |
| reg = (dynamic_range << IN_D_RANGE_SHIFT) | |
| (color_depth << IN_BPC_SHIFT) | |
| (color_space << IN_COLOR_F_SHIFT); |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2); |
| |
| /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3); |
| reg &= ~IN_YC_COEFFI_MASK; |
| if (ycbcr_coeff) |
| reg |= IN_YC_COEFFI_ITU709; |
| else |
| reg |= IN_YC_COEFFI_ITU601; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3); |
| } |
| |
| int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1); |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1); |
| |
| if (!(reg & DET_STA)) { |
| dev_dbg(dp->dev, "Input stream clock not detected.\n"); |
| return -EINVAL; |
| } |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2); |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2); |
| dev_dbg(dp->dev, "wait SYS_CTL_2.\n"); |
| |
| if (reg & CHA_STA) { |
| dev_dbg(dp->dev, "Input stream clk is changing\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp, |
| enum clock_recovery_m_value_type type, |
| u32 m_value, |
| u32 n_value) |
| { |
| u32 reg; |
| |
| if (type == REGISTER_M) { |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| reg |= FIX_M_VID; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| reg = m_value & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0); |
| reg = (m_value >> 8) & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1); |
| reg = (m_value >> 16) & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2); |
| |
| reg = n_value & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0); |
| reg = (n_value >> 8) & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1); |
| reg = (n_value >> 16) & 0xff; |
| writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| reg &= ~FIX_M_VID; |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4); |
| |
| writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0); |
| writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1); |
| writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2); |
| } |
| } |
| |
| void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type) |
| { |
| u32 reg; |
| |
| if (type == VIDEO_TIMING_FROM_CAPTURE) { |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| reg &= ~FORMAT_SEL; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| reg |= FORMAT_SEL; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| } |
| } |
| |
| void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable) |
| { |
| u32 reg; |
| |
| if (enable) { |
| reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| reg &= ~VIDEO_MODE_MASK; |
| reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; |
| writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| } else { |
| reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| reg &= ~VIDEO_MODE_MASK; |
| reg |= VIDEO_MODE_SLAVE_MODE; |
| writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| } |
| } |
| |
| void exynos_dp_start_video(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| reg |= VIDEO_EN; |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1); |
| } |
| |
| int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3); |
| if (!(reg & STRM_VALID)) { |
| dev_dbg(dp->dev, "Input video stream is not detected.\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp, |
| struct video_info *video_info) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1); |
| reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); |
| reg |= MASTER_VID_FUNC_EN_N; |
| writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| reg &= ~INTERACE_SCAN_CFG; |
| reg |= (video_info->interlaced << 2); |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| reg &= ~VSYNC_POLARITY_CFG; |
| reg |= (video_info->v_sync_polarity << 1); |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| reg &= ~HSYNC_POLARITY_CFG; |
| reg |= (video_info->h_sync_polarity << 0); |
| writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10); |
| |
| reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; |
| writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL); |
| } |
| |
| void exynos_dp_enable_scrambling(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| reg &= ~SCRAMBLING_DISABLE; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| } |
| |
| void exynos_dp_disable_scrambling(struct exynos_dp_device *dp) |
| { |
| u32 reg; |
| |
| reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| reg |= SCRAMBLING_DISABLE; |
| writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET); |
| } |