blob: 1be64a1506d0164593bafc6fdc847570813b1934 [file] [log] [blame]
/*
* S390 version
* Copyright IBM Corp. 1999, 2000
* Author(s): Hartmut Penner (hp@de.ibm.com),
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*
* Derived from "include/asm-i386/uaccess.h"
*/
#ifndef __S390_UACCESS_H
#define __S390_UACCESS_H
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/errno.h>
#include <asm/ctl_reg.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
* get_fs() == KERNEL_DS, checking is bypassed.
*
* For historical reasons, these macros are grossly misnamed.
*/
#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) })
#define KERNEL_DS MAKE_MM_SEG(0)
#define USER_DS MAKE_MM_SEG(1)
#define get_ds() (KERNEL_DS)
#define get_fs() (current->thread.mm_segment)
#define set_fs(x) \
({ \
unsigned long __pto; \
current->thread.mm_segment = (x); \
__pto = current->thread.mm_segment.ar4 ? \
S390_lowcore.user_asce : S390_lowcore.kernel_asce; \
__ctl_load(__pto, 7, 7); \
})
#define segment_eq(a,b) ((a).ar4 == (b).ar4)
static inline int __range_ok(unsigned long addr, unsigned long size)
{
return 1;
}
#define __access_ok(addr, size) \
({ \
__chk_user_ptr(addr); \
__range_ok((unsigned long)(addr), (size)); \
})
#define access_ok(type, addr, size) __access_ok(addr, size)
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
int insn, fixup;
};
static inline unsigned long extable_insn(const struct exception_table_entry *x)
{
return (unsigned long)&x->insn + x->insn;
}
static inline unsigned long extable_fixup(const struct exception_table_entry *x)
{
return (unsigned long)&x->fixup + x->fixup;
}
#define ARCH_HAS_SORT_EXTABLE
#define ARCH_HAS_SEARCH_EXTABLE
/**
* __copy_from_user: - Copy a block of data from user space, with less checking.
* @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from user space to kernel space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
unsigned long __must_check __copy_from_user(void *to, const void __user *from,
unsigned long n);
/**
* __copy_to_user: - Copy a block of data into user space, with less checking.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from kernel space to user space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
unsigned long __must_check __copy_to_user(void __user *to, const void *from,
unsigned long n);
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
{
size = __copy_to_user(ptr, x, size);
return size ? -EFAULT : 0;
}
static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
{
size = __copy_from_user(x, ptr, size);
return size ? -EFAULT : 0;
}
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
*/
#define __put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __x = (x); \
int __pu_err = -EFAULT; \
__chk_user_ptr(ptr); \
switch (sizeof (*(ptr))) { \
case 1: \
case 2: \
case 4: \
case 8: \
__pu_err = __put_user_fn(&__x, ptr, \
sizeof(*(ptr))); \
break; \
default: \
__put_user_bad(); \
break; \
} \
__pu_err; \
})
#define put_user(x, ptr) \
({ \
might_fault(); \
__put_user(x, ptr); \
})
int __put_user_bad(void) __attribute__((noreturn));
#define __get_user(x, ptr) \
({ \
int __gu_err = -EFAULT; \
__chk_user_ptr(ptr); \
switch (sizeof(*(ptr))) { \
case 1: { \
unsigned char __x; \
__gu_err = __get_user_fn(&__x, ptr, \
sizeof(*(ptr))); \
(x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 2: { \
unsigned short __x; \
__gu_err = __get_user_fn(&__x, ptr, \
sizeof(*(ptr))); \
(x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 4: { \
unsigned int __x; \
__gu_err = __get_user_fn(&__x, ptr, \
sizeof(*(ptr))); \
(x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
case 8: { \
unsigned long long __x; \
__gu_err = __get_user_fn(&__x, ptr, \
sizeof(*(ptr))); \
(x) = *(__force __typeof__(*(ptr)) *) &__x; \
break; \
}; \
default: \
__get_user_bad(); \
break; \
} \
__gu_err; \
})
#define get_user(x, ptr) \
({ \
might_fault(); \
__get_user(x, ptr); \
})
int __get_user_bad(void) __attribute__((noreturn));
#define __put_user_unaligned __put_user
#define __get_user_unaligned __get_user
/**
* copy_to_user: - Copy a block of data into user space.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from kernel space to user space.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
static inline unsigned long __must_check
copy_to_user(void __user *to, const void *from, unsigned long n)
{
might_fault();
return __copy_to_user(to, from, n);
}
void copy_from_user_overflow(void)
#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
__compiletime_warning("copy_from_user() buffer size is not provably correct")
#endif
;
/**
* copy_from_user: - Copy a block of data from user space.
* @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from user space to kernel space.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned int sz = __compiletime_object_size(to);
might_fault();
if (unlikely(sz != -1 && sz < n)) {
copy_from_user_overflow();
return n;
}
return __copy_from_user(to, from, n);
}
unsigned long __must_check
__copy_in_user(void __user *to, const void __user *from, unsigned long n);
static inline unsigned long __must_check
copy_in_user(void __user *to, const void __user *from, unsigned long n)
{
might_fault();
return __copy_in_user(to, from, n);
}
/*
* Copy a null terminated string from userspace.
*/
long __strncpy_from_user(char *dst, const char __user *src, long count);
static inline long __must_check
strncpy_from_user(char *dst, const char __user *src, long count)
{
might_fault();
return __strncpy_from_user(dst, src, count);
}
unsigned long __must_check __strnlen_user(const char __user *src, unsigned long count);
static inline unsigned long strnlen_user(const char __user *src, unsigned long n)
{
might_fault();
return __strnlen_user(src, n);
}
/**
* strlen_user: - Get the size of a string in user space.
* @str: The string to measure.
*
* Context: User context only. This function may sleep.
*
* Get the size of a NUL-terminated string in user space.
*
* Returns the size of the string INCLUDING the terminating NUL.
* On exception, returns 0.
*
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
#define strlen_user(str) strnlen_user(str, ~0UL)
/*
* Zero Userspace
*/
unsigned long __must_check __clear_user(void __user *to, unsigned long size);
static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
{
might_fault();
return __clear_user(to, n);
}
int copy_to_user_real(void __user *dest, void *src, unsigned long count);
#endif /* __S390_UACCESS_H */