| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _BRCM_SDH_H_ |
| #define _BRCM_SDH_H_ |
| |
| #include <linux/skbuff.h> |
| |
| #define SDIO_FUNC_0 0 |
| #define SDIO_FUNC_1 1 |
| #define SDIO_FUNC_2 2 |
| |
| #define SDIOD_FBR_SIZE 0x100 |
| |
| /* io_en */ |
| #define SDIO_FUNC_ENABLE_1 0x02 |
| #define SDIO_FUNC_ENABLE_2 0x04 |
| |
| /* io_rdys */ |
| #define SDIO_FUNC_READY_1 0x02 |
| #define SDIO_FUNC_READY_2 0x04 |
| |
| /* intr_status */ |
| #define INTR_STATUS_FUNC1 0x2 |
| #define INTR_STATUS_FUNC2 0x4 |
| |
| /* Maximum number of I/O funcs */ |
| #define SDIOD_MAX_IOFUNCS 7 |
| |
| /* as of sdiod rev 0, supports 3 functions */ |
| #define SBSDIO_NUM_FUNCTION 3 |
| |
| /* function 1 miscellaneous registers */ |
| |
| /* sprom command and status */ |
| #define SBSDIO_SPROM_CS 0x10000 |
| /* sprom info register */ |
| #define SBSDIO_SPROM_INFO 0x10001 |
| /* sprom indirect access data byte 0 */ |
| #define SBSDIO_SPROM_DATA_LOW 0x10002 |
| /* sprom indirect access data byte 1 */ |
| #define SBSDIO_SPROM_DATA_HIGH 0x10003 |
| /* sprom indirect access addr byte 0 */ |
| #define SBSDIO_SPROM_ADDR_LOW 0x10004 |
| /* sprom indirect access addr byte 0 */ |
| #define SBSDIO_SPROM_ADDR_HIGH 0x10005 |
| /* xtal_pu (gpio) output */ |
| #define SBSDIO_CHIP_CTRL_DATA 0x10006 |
| /* xtal_pu (gpio) enable */ |
| #define SBSDIO_CHIP_CTRL_EN 0x10007 |
| /* rev < 7, watermark for sdio device */ |
| #define SBSDIO_WATERMARK 0x10008 |
| /* control busy signal generation */ |
| #define SBSDIO_DEVICE_CTL 0x10009 |
| |
| /* SB Address Window Low (b15) */ |
| #define SBSDIO_FUNC1_SBADDRLOW 0x1000A |
| /* SB Address Window Mid (b23:b16) */ |
| #define SBSDIO_FUNC1_SBADDRMID 0x1000B |
| /* SB Address Window High (b31:b24) */ |
| #define SBSDIO_FUNC1_SBADDRHIGH 0x1000C |
| /* Frame Control (frame term/abort) */ |
| #define SBSDIO_FUNC1_FRAMECTRL 0x1000D |
| /* ChipClockCSR (ALP/HT ctl/status) */ |
| #define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E |
| /* SdioPullUp (on cmd, d0-d2) */ |
| #define SBSDIO_FUNC1_SDIOPULLUP 0x1000F |
| /* Write Frame Byte Count Low */ |
| #define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 |
| /* Write Frame Byte Count High */ |
| #define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A |
| /* Read Frame Byte Count Low */ |
| #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B |
| /* Read Frame Byte Count High */ |
| #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C |
| |
| #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ |
| #define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */ |
| |
| /* function 1 OCP space */ |
| |
| /* sb offset addr is <= 15 bits, 32k */ |
| #define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF |
| #define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000 |
| /* with b15, maps to 32-bit SB access */ |
| #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 |
| |
| /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ |
| |
| #define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */ |
| #define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */ |
| #define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */ |
| /* Address bits from SBADDR regs */ |
| #define SBSDIO_SBWINDOW_MASK 0xffff8000 |
| |
| #define SDIOH_READ 0 /* Read request */ |
| #define SDIOH_WRITE 1 /* Write request */ |
| |
| #define SDIOH_DATA_FIX 0 /* Fixed addressing */ |
| #define SDIOH_DATA_INC 1 /* Incremental addressing */ |
| |
| /* internal return code */ |
| #define SUCCESS 0 |
| #define ERROR 1 |
| |
| struct brcmf_sdreg { |
| int func; |
| int offset; |
| int value; |
| }; |
| |
| struct brcmf_sdio_dev { |
| struct sdio_func *func[SDIO_MAX_FUNCS]; |
| u8 num_funcs; /* Supported funcs on client */ |
| u32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; |
| u32 sbwad; /* Save backplane window address */ |
| bool regfail; /* status of last reg_r/w call */ |
| void *bus; |
| atomic_t suspend; /* suspend flag */ |
| wait_queue_head_t request_byte_wait; |
| wait_queue_head_t request_word_wait; |
| wait_queue_head_t request_packet_wait; |
| wait_queue_head_t request_buffer_wait; |
| |
| }; |
| |
| /* Register/deregister device interrupt handler. */ |
| extern int |
| brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev); |
| |
| extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev); |
| |
| /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface). |
| * fn: function number |
| * addr: unmodified SDIO-space address |
| * data: data byte to write |
| * err: pointer to error code (or NULL) |
| */ |
| extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func, |
| u32 addr, int *err); |
| extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func, |
| u32 addr, u8 data, int *err); |
| |
| /* Synchronous access to device (client) core registers via CMD53 to F1. |
| * addr: backplane address (i.e. >= regsva from attach) |
| * size: register width in bytes (2 or 4) |
| * data: data for register write |
| */ |
| extern u32 |
| brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size); |
| |
| extern u32 |
| brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size, |
| u32 data); |
| |
| /* Indicate if last reg read/write failed */ |
| extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev); |
| |
| /* Buffer transfer to/from device (client) core via cmd53. |
| * fn: function number |
| * addr: backplane address (i.e. >= regsva from attach) |
| * flags: backplane width, address increment, sync/async |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * pkt: pointer to packet associated with buf (if any) |
| * complete: callback function for command completion (async only) |
| * handle: handle for completion callback (first arg in callback) |
| * Returns 0 or error code. |
| * NOTE: Async operation is not currently supported. |
| */ |
| extern int |
| brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt); |
| extern int |
| brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt); |
| |
| /* Flags bits */ |
| |
| /* Four-byte target (backplane) width (vs. two-byte) */ |
| #define SDIO_REQ_4BYTE 0x1 |
| /* Fixed address (FIFO) (vs. incrementing address) */ |
| #define SDIO_REQ_FIXED 0x2 |
| /* Async request (vs. sync request) */ |
| #define SDIO_REQ_ASYNC 0x4 |
| |
| /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). |
| * rw: read or write (0/1) |
| * addr: direct SDIO address |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * Returns 0 or error code. |
| */ |
| extern int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, |
| u32 addr, u8 *buf, uint nbytes); |
| |
| /* Issue an abort to the specified function */ |
| extern int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn); |
| |
| /* platform specific/high level functions */ |
| extern int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); |
| extern int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev); |
| |
| extern int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, |
| u32 address); |
| |
| /* attach, return handler on success, NULL if failed. |
| * The handler shall be provided by all subsequent calls. No local cache |
| * cfghdl points to the starting address of pci device mapped memory |
| */ |
| extern int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev); |
| extern void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev); |
| |
| /* read or write one byte using cmd52 */ |
| extern int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, |
| uint fnc, uint addr, u8 *byte); |
| |
| /* read or write 2/4 bytes using cmd53 */ |
| extern int |
| brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, |
| uint rw, uint fnc, uint addr, |
| u32 *word, uint nbyte); |
| |
| /* read or write any buffer using cmd53 */ |
| extern int |
| brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev, |
| uint fix_inc, uint rw, uint fnc_num, |
| u32 addr, uint regwidth, |
| u32 buflen, u8 *buffer, struct sk_buff *pkt); |
| |
| /* Watchdog timer interface for pm ops */ |
| extern void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, |
| bool enable); |
| |
| extern void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype, |
| u32 regsva, struct brcmf_sdio_dev *sdiodev); |
| extern void brcmf_sdbrcm_disconnect(void *ptr); |
| extern void brcmf_sdbrcm_isr(void *arg); |
| #endif /* _BRCM_SDH_H_ */ |
