| /*====================================================================== |
| |
| A PCMCIA token-ring driver for IBM-based cards |
| |
| This driver supports the IBM PCMCIA Token-Ring Card. |
| Written by Steve Kipisz, kipisz@vnet.ibm.com or |
| bungy@ibm.net |
| |
| Written 1995,1996. |
| |
| This code is based on pcnet_cs.c from David Hinds. |
| |
| V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com |
| |
| Linux V2.2.x presented significant changes to the underlying |
| ibmtr.c code. Mainly the code became a lot more organized and |
| modular. |
| |
| This caused the old PCMCIA Token Ring driver to give up and go |
| home early. Instead of just patching the old code to make it |
| work, the PCMCIA code has been streamlined, updated and possibly |
| improved. |
| |
| This code now only contains code required for the Card Services. |
| All we do here is set the card up enough so that the real ibmtr.c |
| driver can find it and work with it properly. |
| |
| i.e. We set up the io port, irq, mmio memory and shared ram |
| memory. This enables ibmtr_probe in ibmtr.c to find the card and |
| configure it as though it was a normal ISA and/or PnP card. |
| |
| CHANGES |
| |
| v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com) |
| Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c |
| |
| v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com) |
| Updated to version 2.2.7 to match the first version of the kernel |
| that the modification to ibmtr.c were incorporated into. |
| |
| v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com) |
| Address translation feature of PCMCIA controller is usable so |
| memory windows can be placed in High memory (meaning above |
| 0xFFFFF.) |
| |
| ======================================================================*/ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/module.h> |
| #include <linux/ethtool.h> |
| #include <linux/netdevice.h> |
| #include <linux/trdevice.h> |
| #include <linux/ibmtr.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #define PCMCIA |
| #include "../tokenring/ibmtr.c" |
| |
| #ifdef PCMCIA_DEBUG |
| static int pc_debug = PCMCIA_DEBUG; |
| module_param(pc_debug, int, 0); |
| #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) |
| static char *version = |
| "ibmtr_cs.c 1.10 1996/01/06 05:19:00 (Steve Kipisz)\n" |
| " 2.2.7 1999/05/03 12:00:00 (Mike Phillips)\n" |
| " 2.4.2 2001/30/28 Midnight (Burt Silverman)\n"; |
| #else |
| #define DEBUG(n, args...) |
| #endif |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| /* MMIO base address */ |
| static u_long mmiobase = 0xce000; |
| |
| /* SRAM base address */ |
| static u_long srambase = 0xd0000; |
| |
| /* SRAM size 8,16,32,64 */ |
| static u_long sramsize = 64; |
| |
| /* Ringspeed 4,16 */ |
| static int ringspeed = 16; |
| |
| module_param(mmiobase, ulong, 0); |
| module_param(srambase, ulong, 0); |
| module_param(sramsize, ulong, 0); |
| module_param(ringspeed, int, 0); |
| MODULE_LICENSE("GPL"); |
| |
| /*====================================================================*/ |
| |
| static int ibmtr_config(struct pcmcia_device *link); |
| static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase); |
| static void ibmtr_release(struct pcmcia_device *link); |
| static void ibmtr_detach(struct pcmcia_device *p_dev); |
| |
| /*====================================================================*/ |
| |
| typedef struct ibmtr_dev_t { |
| struct pcmcia_device *p_dev; |
| struct net_device *dev; |
| dev_node_t node; |
| window_handle_t sram_win_handle; |
| struct tok_info *ti; |
| } ibmtr_dev_t; |
| |
| static void netdev_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strcpy(info->driver, "ibmtr_cs"); |
| } |
| |
| static const struct ethtool_ops netdev_ethtool_ops = { |
| .get_drvinfo = netdev_get_drvinfo, |
| }; |
| |
| /*====================================================================== |
| |
| ibmtr_attach() creates an "instance" of the driver, allocating |
| local data structures for one device. The device is registered |
| with Card Services. |
| |
| ======================================================================*/ |
| |
| static int __devinit ibmtr_attach(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info; |
| struct net_device *dev; |
| |
| DEBUG(0, "ibmtr_attach()\n"); |
| |
| /* Create new token-ring device */ |
| info = kmalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) return -ENOMEM; |
| memset(info,0,sizeof(*info)); |
| dev = alloc_trdev(sizeof(struct tok_info)); |
| if (!dev) { |
| kfree(info); |
| return -ENOMEM; |
| } |
| |
| info->p_dev = link; |
| link->priv = info; |
| info->ti = netdev_priv(dev); |
| |
| link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; |
| link->io.NumPorts1 = 4; |
| link->io.IOAddrLines = 16; |
| link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; |
| link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| link->irq.Handler = &tok_interrupt; |
| link->conf.Attributes = CONF_ENABLE_IRQ; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| link->conf.Present = PRESENT_OPTION; |
| |
| link->irq.Instance = info->dev = dev; |
| |
| SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); |
| |
| return ibmtr_config(link); |
| } /* ibmtr_attach */ |
| |
| /*====================================================================== |
| |
| This deletes a driver "instance". The device is de-registered |
| with Card Services. If it has been released, all local data |
| structures are freed. Otherwise, the structures will be freed |
| when the device is released. |
| |
| ======================================================================*/ |
| |
| static void ibmtr_detach(struct pcmcia_device *link) |
| { |
| struct ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| struct tok_info *ti = netdev_priv(dev); |
| |
| DEBUG(0, "ibmtr_detach(0x%p)\n", link); |
| |
| /* |
| * When the card removal interrupt hits tok_interrupt(), |
| * bail out early, so we don't crash the machine |
| */ |
| ti->sram_phys |= 1; |
| |
| if (link->dev_node) |
| unregister_netdev(dev); |
| |
| del_timer_sync(&(ti->tr_timer)); |
| |
| ibmtr_release(link); |
| |
| free_netdev(dev); |
| kfree(info); |
| } /* ibmtr_detach */ |
| |
| /*====================================================================== |
| |
| ibmtr_config() is scheduled to run after a CARD_INSERTION event |
| is received, to configure the PCMCIA socket, and to make the |
| token-ring device available to the system. |
| |
| ======================================================================*/ |
| |
| #define CS_CHECK(fn, ret) \ |
| do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) |
| |
| static int __devinit ibmtr_config(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| struct tok_info *ti = netdev_priv(dev); |
| win_req_t req; |
| memreq_t mem; |
| int i, last_ret, last_fn; |
| |
| DEBUG(0, "ibmtr_config(0x%p)\n", link); |
| |
| link->conf.ConfigIndex = 0x61; |
| |
| /* Determine if this is PRIMARY or ALTERNATE. */ |
| |
| /* Try PRIMARY card at 0xA20-0xA23 */ |
| link->io.BasePort1 = 0xA20; |
| i = pcmcia_request_io(link, &link->io); |
| if (i != CS_SUCCESS) { |
| /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ |
| link->io.BasePort1 = 0xA24; |
| CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); |
| } |
| dev->base_addr = link->io.BasePort1; |
| |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
| dev->irq = link->irq.AssignedIRQ; |
| ti->irq = link->irq.AssignedIRQ; |
| ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); |
| |
| /* Allocate the MMIO memory window */ |
| req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| req.Attributes |= WIN_USE_WAIT; |
| req.Base = 0; |
| req.Size = 0x2000; |
| req.AccessSpeed = 250; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win)); |
| |
| mem.CardOffset = mmiobase; |
| mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); |
| ti->mmio = ioremap(req.Base, req.Size); |
| |
| /* Allocate the SRAM memory window */ |
| req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| req.Attributes |= WIN_USE_WAIT; |
| req.Base = 0; |
| req.Size = sramsize * 1024; |
| req.AccessSpeed = 250; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &info->sram_win_handle)); |
| |
| mem.CardOffset = srambase; |
| mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(info->sram_win_handle, &mem)); |
| |
| ti->sram_base = mem.CardOffset >> 12; |
| ti->sram_virt = ioremap(req.Base, req.Size); |
| ti->sram_phys = req.Base; |
| |
| CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
| |
| /* Set up the Token-Ring Controller Configuration Register and |
| turn on the card. Check the "Local Area Network Credit Card |
| Adapters Technical Reference" SC30-3585 for this info. */ |
| ibmtr_hw_setup(dev, mmiobase); |
| |
| link->dev_node = &info->node; |
| SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
| |
| i = ibmtr_probe_card(dev); |
| if (i != 0) { |
| printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n"); |
| link->dev_node = NULL; |
| goto failed; |
| } |
| |
| strcpy(info->node.dev_name, dev->name); |
| |
| printk(KERN_INFO "%s: port %#3lx, irq %d,", |
| dev->name, dev->base_addr, dev->irq); |
| printk (" mmio %#5lx,", (u_long)ti->mmio); |
| printk (" sram %#5lx,", (u_long)ti->sram_base << 12); |
| printk ("\n" KERN_INFO " hwaddr="); |
| for (i = 0; i < TR_ALEN; i++) |
| printk("%02X", dev->dev_addr[i]); |
| printk("\n"); |
| return 0; |
| |
| cs_failed: |
| cs_error(link, last_fn, last_ret); |
| failed: |
| ibmtr_release(link); |
| return -ENODEV; |
| } /* ibmtr_config */ |
| |
| /*====================================================================== |
| |
| After a card is removed, ibmtr_release() will unregister the net |
| device, and release the PCMCIA configuration. If the device is |
| still open, this will be postponed until it is closed. |
| |
| ======================================================================*/ |
| |
| static void ibmtr_release(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| DEBUG(0, "ibmtr_release(0x%p)\n", link); |
| |
| if (link->win) { |
| struct tok_info *ti = netdev_priv(dev); |
| iounmap(ti->mmio); |
| pcmcia_release_window(info->sram_win_handle); |
| } |
| pcmcia_disable_device(link); |
| } |
| |
| static int ibmtr_suspend(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| return 0; |
| } |
| |
| static int ibmtr_resume(struct pcmcia_device *link) |
| { |
| ibmtr_dev_t *info = link->priv; |
| struct net_device *dev = info->dev; |
| |
| if (link->open) { |
| ibmtr_probe(dev); /* really? */ |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| |
| /*====================================================================*/ |
| |
| static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase) |
| { |
| int i; |
| |
| /* Bizarre IBM behavior, there are 16 bits of information we |
| need to set, but the card only allows us to send 4 bits at a |
| time. For each byte sent to base_addr, bits 7-4 tell the |
| card which part of the 16 bits we are setting, bits 3-0 contain |
| the actual information */ |
| |
| /* First nibble provides 4 bits of mmio */ |
| i = (mmiobase >> 16) & 0x0F; |
| outb(i, dev->base_addr); |
| |
| /* Second nibble provides 3 bits of mmio */ |
| i = 0x10 | ((mmiobase >> 12) & 0x0E); |
| outb(i, dev->base_addr); |
| |
| /* Third nibble, hard-coded values */ |
| i = 0x26; |
| outb(i, dev->base_addr); |
| |
| /* Fourth nibble sets shared ram page size */ |
| |
| /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */ |
| i = (sramsize >> 4) & 0x07; |
| i = ((i == 4) ? 3 : i) << 2; |
| i |= 0x30; |
| |
| if (ringspeed == 16) |
| i |= 2; |
| if (dev->base_addr == 0xA24) |
| i |= 1; |
| outb(i, dev->base_addr); |
| |
| /* 0x40 will release the card for use */ |
| outb(0x40, dev->base_addr); |
| |
| return; |
| } |
| |
| static struct pcmcia_device_id ibmtr_ids[] = { |
| PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e), |
| PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); |
| |
| static struct pcmcia_driver ibmtr_cs_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "ibmtr_cs", |
| }, |
| .probe = ibmtr_attach, |
| .remove = ibmtr_detach, |
| .id_table = ibmtr_ids, |
| .suspend = ibmtr_suspend, |
| .resume = ibmtr_resume, |
| }; |
| |
| static int __init init_ibmtr_cs(void) |
| { |
| return pcmcia_register_driver(&ibmtr_cs_driver); |
| } |
| |
| static void __exit exit_ibmtr_cs(void) |
| { |
| pcmcia_unregister_driver(&ibmtr_cs_driver); |
| } |
| |
| module_init(init_ibmtr_cs); |
| module_exit(exit_ibmtr_cs); |