| /* |
| * Backlight driver for Analog Devices ADP8870 Backlight Devices |
| * |
| * Copyright 2009-2011 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/version.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/leds.h> |
| #include <linux/workqueue.h> |
| #include <linux/slab.h> |
| |
| #include <linux/i2c/adp8870.h> |
| #define ADP8870_EXT_FEATURES |
| #define ADP8870_USE_LEDS |
| |
| |
| #define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */ |
| #define ADP8870_MDCR 0x01 /* Device mode and status */ |
| #define ADP8870_INT_STAT 0x02 /* Interrupts status */ |
| #define ADP8870_INT_EN 0x03 /* Interrupts enable */ |
| #define ADP8870_CFGR 0x04 /* Configuration register */ |
| #define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */ |
| #define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */ |
| #define ADP8870_BLOFF 0x07 /* Backlight off timeout */ |
| #define ADP8870_BLDIM 0x08 /* Backlight dim timeout */ |
| #define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */ |
| #define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */ |
| #define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */ |
| #define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */ |
| #define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */ |
| #define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */ |
| #define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */ |
| #define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */ |
| #define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */ |
| #define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */ |
| #define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */ |
| #define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */ |
| #define ADP8870_ISCC 0x1B /* Independent sink current control register */ |
| #define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */ |
| #define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */ |
| #define ADP8870_ISCF 0x1E /* Independent sink current fade register */ |
| #define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */ |
| #define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */ |
| #define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */ |
| #define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */ |
| #define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */ |
| #define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */ |
| #define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */ |
| #define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */ |
| #define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */ |
| #define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */ |
| #define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */ |
| #define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */ |
| #define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */ |
| #define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */ |
| #define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */ |
| #define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */ |
| #define ADP8870_L2TRP 0x32 /* L2 comparator reference */ |
| #define ADP8870_L2HYS 0x33 /* L2 hysteresis */ |
| #define ADP8870_L3TRP 0x34 /* L3 comparator reference */ |
| #define ADP8870_L3HYS 0x35 /* L3 hysteresis */ |
| #define ADP8870_L4TRP 0x36 /* L4 comparator reference */ |
| #define ADP8870_L4HYS 0x37 /* L4 hysteresis */ |
| #define ADP8870_L5TRP 0x38 /* L5 comparator reference */ |
| #define ADP8870_L5HYS 0x39 /* L5 hysteresis */ |
| #define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */ |
| #define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */ |
| #define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */ |
| #define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */ |
| |
| #define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */ |
| #define ADP8870_DEVID(x) ((x) & 0xF) |
| #define ADP8870_MANID(x) ((x) >> 4) |
| |
| /* MDCR Device mode and status */ |
| #define D7ALSEN (1 << 7) |
| #define INT_CFG (1 << 6) |
| #define NSTBY (1 << 5) |
| #define DIM_EN (1 << 4) |
| #define GDWN_DIS (1 << 3) |
| #define SIS_EN (1 << 2) |
| #define CMP_AUTOEN (1 << 1) |
| #define BLEN (1 << 0) |
| |
| /* ADP8870_ALS1_EN Main ALS comparator level enable */ |
| #define L5_EN (1 << 3) |
| #define L4_EN (1 << 2) |
| #define L3_EN (1 << 1) |
| #define L2_EN (1 << 0) |
| |
| #define CFGR_BLV_SHIFT 3 |
| #define CFGR_BLV_MASK 0x7 |
| #define ADP8870_FLAG_LED_MASK 0xFF |
| |
| #define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) |
| #define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) |
| #define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1) |
| |
| struct adp8870_bl { |
| struct i2c_client *client; |
| struct backlight_device *bl; |
| struct adp8870_led *led; |
| struct adp8870_backlight_platform_data *pdata; |
| struct mutex lock; |
| unsigned long cached_daylight_max; |
| int id; |
| int revid; |
| int current_brightness; |
| }; |
| |
| struct adp8870_led { |
| struct led_classdev cdev; |
| struct work_struct work; |
| struct i2c_client *client; |
| enum led_brightness new_brightness; |
| int id; |
| int flags; |
| }; |
| |
| static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed reading at 0x%02x\n", reg); |
| return ret; |
| } |
| |
| *val = ret; |
| return 0; |
| } |
| |
| |
| static int adp8870_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int ret = i2c_smbus_write_byte_data(client, reg, val); |
| if (ret) |
| dev_err(&client->dev, "failed to write\n"); |
| |
| return ret; |
| } |
| |
| static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask) |
| { |
| struct adp8870_bl *data = i2c_get_clientdata(client); |
| uint8_t reg_val; |
| int ret; |
| |
| mutex_lock(&data->lock); |
| |
| ret = adp8870_read(client, reg, ®_val); |
| |
| if (!ret && ((reg_val & bit_mask) == 0)) { |
| reg_val |= bit_mask; |
| ret = adp8870_write(client, reg, reg_val); |
| } |
| |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask) |
| { |
| struct adp8870_bl *data = i2c_get_clientdata(client); |
| uint8_t reg_val; |
| int ret; |
| |
| mutex_lock(&data->lock); |
| |
| ret = adp8870_read(client, reg, ®_val); |
| |
| if (!ret && (reg_val & bit_mask)) { |
| reg_val &= ~bit_mask; |
| ret = adp8870_write(client, reg, reg_val); |
| } |
| |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| /* |
| * Independent sink / LED |
| */ |
| #if defined(ADP8870_USE_LEDS) |
| static void adp8870_led_work(struct work_struct *work) |
| { |
| struct adp8870_led *led = container_of(work, struct adp8870_led, work); |
| adp8870_write(led->client, ADP8870_ISC1 + led->id - 1, |
| led->new_brightness >> 1); |
| } |
| |
| static void adp8870_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct adp8870_led *led; |
| |
| led = container_of(led_cdev, struct adp8870_led, cdev); |
| led->new_brightness = value; |
| /* |
| * Use workqueue for IO since I2C operations can sleep. |
| */ |
| schedule_work(&led->work); |
| } |
| |
| static int adp8870_led_setup(struct adp8870_led *led) |
| { |
| struct i2c_client *client = led->client; |
| int ret = 0; |
| |
| ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1)); |
| if (ret) |
| return ret; |
| |
| if (led->id > 4) |
| ret = adp8870_set_bits(client, ADP8870_ISCT1, |
| (led->flags & 0x3) << ((led->id - 5) * 2)); |
| else |
| ret = adp8870_set_bits(client, ADP8870_ISCT2, |
| (led->flags & 0x3) << ((led->id - 1) * 2)); |
| |
| return ret; |
| } |
| |
| static int __devinit adp8870_led_probe(struct i2c_client *client) |
| { |
| struct adp8870_backlight_platform_data *pdata = |
| client->dev.platform_data; |
| struct adp8870_bl *data = i2c_get_clientdata(client); |
| struct adp8870_led *led, *led_dat; |
| struct led_info *cur_led; |
| int ret, i; |
| |
| |
| led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL); |
| if (led == NULL) { |
| dev_err(&client->dev, "failed to alloc memory\n"); |
| return -ENOMEM; |
| } |
| |
| ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law); |
| if (ret) |
| goto err_free; |
| |
| ret = adp8870_write(client, ADP8870_ISCT1, |
| (pdata->led_on_time & 0x3) << 6); |
| if (ret) |
| goto err_free; |
| |
| ret = adp8870_write(client, ADP8870_ISCF, |
| FADE_VAL(pdata->led_fade_in, pdata->led_fade_out)); |
| if (ret) |
| goto err_free; |
| |
| for (i = 0; i < pdata->num_leds; ++i) { |
| cur_led = &pdata->leds[i]; |
| led_dat = &led[i]; |
| |
| led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK; |
| |
| if (led_dat->id > 7 || led_dat->id < 1) { |
| dev_err(&client->dev, "Invalid LED ID %d\n", |
| led_dat->id); |
| goto err; |
| } |
| |
| if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) { |
| dev_err(&client->dev, "LED %d used by Backlight\n", |
| led_dat->id); |
| goto err; |
| } |
| |
| led_dat->cdev.name = cur_led->name; |
| led_dat->cdev.default_trigger = cur_led->default_trigger; |
| led_dat->cdev.brightness_set = adp8870_led_set; |
| led_dat->cdev.brightness = LED_OFF; |
| led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT; |
| led_dat->client = client; |
| led_dat->new_brightness = LED_OFF; |
| INIT_WORK(&led_dat->work, adp8870_led_work); |
| |
| ret = led_classdev_register(&client->dev, &led_dat->cdev); |
| if (ret) { |
| dev_err(&client->dev, "failed to register LED %d\n", |
| led_dat->id); |
| goto err; |
| } |
| |
| ret = adp8870_led_setup(led_dat); |
| if (ret) { |
| dev_err(&client->dev, "failed to write\n"); |
| i++; |
| goto err; |
| } |
| } |
| |
| data->led = led; |
| |
| return 0; |
| |
| err: |
| for (i = i - 1; i >= 0; --i) { |
| led_classdev_unregister(&led[i].cdev); |
| cancel_work_sync(&led[i].work); |
| } |
| |
| err_free: |
| kfree(led); |
| |
| return ret; |
| } |
| |
| static int __devexit adp8870_led_remove(struct i2c_client *client) |
| { |
| struct adp8870_backlight_platform_data *pdata = |
| client->dev.platform_data; |
| struct adp8870_bl *data = i2c_get_clientdata(client); |
| int i; |
| |
| for (i = 0; i < pdata->num_leds; i++) { |
| led_classdev_unregister(&data->led[i].cdev); |
| cancel_work_sync(&data->led[i].work); |
| } |
| |
| kfree(data->led); |
| return 0; |
| } |
| #else |
| static int __devinit adp8870_led_probe(struct i2c_client *client) |
| { |
| return 0; |
| } |
| |
| static int __devexit adp8870_led_remove(struct i2c_client *client) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int adp8870_bl_set(struct backlight_device *bl, int brightness) |
| { |
| struct adp8870_bl *data = bl_get_data(bl); |
| struct i2c_client *client = data->client; |
| int ret = 0; |
| |
| if (data->pdata->en_ambl_sens) { |
| if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) { |
| /* Disable Ambient Light auto adjust */ |
| ret = adp8870_clr_bits(client, ADP8870_MDCR, |
| CMP_AUTOEN); |
| if (ret) |
| return ret; |
| ret = adp8870_write(client, ADP8870_BLMX1, brightness); |
| if (ret) |
| return ret; |
| } else { |
| /* |
| * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust |
| * restore daylight l1 sysfs brightness |
| */ |
| ret = adp8870_write(client, ADP8870_BLMX1, |
| data->cached_daylight_max); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_set_bits(client, ADP8870_MDCR, |
| CMP_AUTOEN); |
| if (ret) |
| return ret; |
| } |
| } else { |
| ret = adp8870_write(client, ADP8870_BLMX1, brightness); |
| if (ret) |
| return ret; |
| } |
| |
| if (data->current_brightness && brightness == 0) |
| ret = adp8870_set_bits(client, |
| ADP8870_MDCR, DIM_EN); |
| else if (data->current_brightness == 0 && brightness) |
| ret = adp8870_clr_bits(client, |
| ADP8870_MDCR, DIM_EN); |
| |
| if (!ret) |
| data->current_brightness = brightness; |
| |
| return ret; |
| } |
| |
| static int adp8870_bl_update_status(struct backlight_device *bl) |
| { |
| int brightness = bl->props.brightness; |
| if (bl->props.power != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (bl->props.fb_blank != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| return adp8870_bl_set(bl, brightness); |
| } |
| |
| static int adp8870_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct adp8870_bl *data = bl_get_data(bl); |
| |
| return data->current_brightness; |
| } |
| |
| static const struct backlight_ops adp8870_bl_ops = { |
| .update_status = adp8870_bl_update_status, |
| .get_brightness = adp8870_bl_get_brightness, |
| }; |
| |
| static int adp8870_bl_setup(struct backlight_device *bl) |
| { |
| struct adp8870_bl *data = bl_get_data(bl); |
| struct i2c_client *client = data->client; |
| struct adp8870_backlight_platform_data *pdata = data->pdata; |
| int ret = 0; |
| |
| ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim); |
| if (ret) |
| return ret; |
| |
| if (pdata->en_ambl_sens) { |
| data->cached_daylight_max = pdata->l1_daylight_max; |
| ret = adp8870_write(client, ADP8870_BLMX2, |
| pdata->l2_bright_max); |
| if (ret) |
| return ret; |
| ret = adp8870_write(client, ADP8870_BLDM2, |
| pdata->l2_bright_dim); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLMX3, |
| pdata->l3_office_max); |
| if (ret) |
| return ret; |
| ret = adp8870_write(client, ADP8870_BLDM3, |
| pdata->l3_office_dim); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLMX4, |
| pdata->l4_indoor_max); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLDM4, |
| pdata->l4_indor_dim); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLMX5, |
| pdata->l5_dark_max); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLDM5, |
| pdata->l5_dark_dim); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN | |
| L3_EN | L2_EN); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_CMP_CTL, |
| ALS_CMPR_CFG_VAL(pdata->abml_filt)); |
| if (ret) |
| return ret; |
| } |
| |
| ret = adp8870_write(client, ADP8870_CFGR, |
| BL_CFGR_VAL(pdata->bl_fade_law, 0)); |
| if (ret) |
| return ret; |
| |
| ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in, |
| pdata->bl_fade_out)); |
| if (ret) |
| return ret; |
| /* |
| * ADP8870 Rev0 requires GDWN_DIS bit set |
| */ |
| |
| ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY | |
| (data->revid == 0 ? GDWN_DIS : 0)); |
| |
| return ret; |
| } |
| |
| static ssize_t adp8870_show(struct device *dev, char *buf, int reg) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| int error; |
| uint8_t reg_val; |
| |
| mutex_lock(&data->lock); |
| error = adp8870_read(data->client, reg, ®_val); |
| mutex_unlock(&data->lock); |
| |
| if (error < 0) |
| return error; |
| |
| return sprintf(buf, "%u\n", reg_val); |
| } |
| |
| static ssize_t adp8870_store(struct device *dev, const char *buf, |
| size_t count, int reg) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| unsigned long val; |
| int ret; |
| |
| ret = strict_strtoul(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->lock); |
| adp8870_write(data->client, reg, val); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLMX5); |
| } |
| |
| static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLMX5); |
| } |
| static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show, |
| adp8870_bl_l5_dark_max_store); |
| |
| |
| static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLMX4); |
| } |
| |
| static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLMX4); |
| } |
| static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show, |
| adp8870_bl_l4_indoor_max_store); |
| |
| |
| static ssize_t adp8870_bl_l3_office_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLMX3); |
| } |
| |
| static ssize_t adp8870_bl_l3_office_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLMX3); |
| } |
| |
| static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show, |
| adp8870_bl_l3_office_max_store); |
| |
| static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLMX2); |
| } |
| |
| static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLMX2); |
| } |
| static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show, |
| adp8870_bl_l2_bright_max_store); |
| |
| static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLMX1); |
| } |
| |
| static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| int ret = strict_strtoul(buf, 10, &data->cached_daylight_max); |
| if (ret) |
| return ret; |
| |
| return adp8870_store(dev, buf, count, ADP8870_BLMX1); |
| } |
| static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show, |
| adp8870_bl_l1_daylight_max_store); |
| |
| static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLDM5); |
| } |
| |
| static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLDM5); |
| } |
| static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show, |
| adp8870_bl_l5_dark_dim_store); |
| |
| static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLDM4); |
| } |
| |
| static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLDM4); |
| } |
| static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show, |
| adp8870_bl_l4_indoor_dim_store); |
| |
| |
| static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLDM3); |
| } |
| |
| static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLDM3); |
| } |
| static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show, |
| adp8870_bl_l3_office_dim_store); |
| |
| static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLDM2); |
| } |
| |
| static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLDM2); |
| } |
| static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show, |
| adp8870_bl_l2_bright_dim_store); |
| |
| static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp8870_show(dev, buf, ADP8870_BLDM1); |
| } |
| |
| static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp8870_store(dev, buf, count, ADP8870_BLDM1); |
| } |
| static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show, |
| adp8870_bl_l1_daylight_dim_store); |
| |
| #ifdef ADP8870_EXT_FEATURES |
| static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| int error; |
| uint8_t reg_val; |
| uint16_t ret_val; |
| |
| mutex_lock(&data->lock); |
| error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val); |
| if (error < 0) { |
| mutex_unlock(&data->lock); |
| return error; |
| } |
| ret_val = reg_val; |
| error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val); |
| mutex_unlock(&data->lock); |
| |
| if (error < 0) |
| return error; |
| |
| /* Return 13-bit conversion value for the first light sensor */ |
| ret_val += (reg_val & 0x1F) << 8; |
| |
| return sprintf(buf, "%u\n", ret_val); |
| } |
| static DEVICE_ATTR(ambient_light_level, 0444, |
| adp8870_bl_ambient_light_level_show, NULL); |
| |
| static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| int error; |
| uint8_t reg_val; |
| |
| mutex_lock(&data->lock); |
| error = adp8870_read(data->client, ADP8870_CFGR, ®_val); |
| mutex_unlock(&data->lock); |
| |
| if (error < 0) |
| return error; |
| |
| return sprintf(buf, "%u\n", |
| ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1); |
| } |
| |
| static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct adp8870_bl *data = dev_get_drvdata(dev); |
| unsigned long val; |
| uint8_t reg_val; |
| int ret; |
| |
| ret = strict_strtoul(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| if (val == 0) { |
| /* Enable automatic ambient light sensing */ |
| adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); |
| } else if ((val > 0) && (val < 6)) { |
| /* Disable automatic ambient light sensing */ |
| adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); |
| |
| /* Set user supplied ambient light zone */ |
| mutex_lock(&data->lock); |
| adp8870_read(data->client, ADP8870_CFGR, ®_val); |
| reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT); |
| reg_val |= (val - 1) << CFGR_BLV_SHIFT; |
| adp8870_write(data->client, ADP8870_CFGR, reg_val); |
| mutex_unlock(&data->lock); |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR(ambient_light_zone, 0664, |
| adp8870_bl_ambient_light_zone_show, |
| adp8870_bl_ambient_light_zone_store); |
| #endif |
| |
| static struct attribute *adp8870_bl_attributes[] = { |
| &dev_attr_l5_dark_max.attr, |
| &dev_attr_l5_dark_dim.attr, |
| &dev_attr_l4_indoor_max.attr, |
| &dev_attr_l4_indoor_dim.attr, |
| &dev_attr_l3_office_max.attr, |
| &dev_attr_l3_office_dim.attr, |
| &dev_attr_l2_bright_max.attr, |
| &dev_attr_l2_bright_dim.attr, |
| &dev_attr_l1_daylight_max.attr, |
| &dev_attr_l1_daylight_dim.attr, |
| #ifdef ADP8870_EXT_FEATURES |
| &dev_attr_ambient_light_level.attr, |
| &dev_attr_ambient_light_zone.attr, |
| #endif |
| NULL |
| }; |
| |
| static const struct attribute_group adp8870_bl_attr_group = { |
| .attrs = adp8870_bl_attributes, |
| }; |
| |
| static int __devinit adp8870_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct backlight_properties props; |
| struct backlight_device *bl; |
| struct adp8870_bl *data; |
| struct adp8870_backlight_platform_data *pdata = |
| client->dev.platform_data; |
| uint8_t reg_val; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); |
| return -EIO; |
| } |
| |
| if (!pdata) { |
| dev_err(&client->dev, "no platform data?\n"); |
| return -EINVAL; |
| } |
| |
| ret = adp8870_read(client, ADP8870_MFDVID, ®_val); |
| if (ret < 0) |
| return -EIO; |
| |
| if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) { |
| dev_err(&client->dev, "failed to probe\n"); |
| return -ENODEV; |
| } |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| |
| data->revid = ADP8870_DEVID(reg_val); |
| data->client = client; |
| data->pdata = pdata; |
| data->id = id->driver_data; |
| data->current_brightness = 0; |
| i2c_set_clientdata(client, data); |
| |
| mutex_init(&data->lock); |
| |
| memset(&props, 0, sizeof(props)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS; |
| bl = backlight_device_register(dev_driver_string(&client->dev), |
| &client->dev, data, &adp8870_bl_ops, &props); |
| if (IS_ERR(bl)) { |
| dev_err(&client->dev, "failed to register backlight\n"); |
| ret = PTR_ERR(bl); |
| goto out2; |
| } |
| |
| data->bl = bl; |
| |
| if (pdata->en_ambl_sens) |
| ret = sysfs_create_group(&bl->dev.kobj, |
| &adp8870_bl_attr_group); |
| |
| if (ret) { |
| dev_err(&client->dev, "failed to register sysfs\n"); |
| goto out1; |
| } |
| |
| ret = adp8870_bl_setup(bl); |
| if (ret) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| backlight_update_status(bl); |
| |
| dev_info(&client->dev, "Rev.%d Backlight\n", data->revid); |
| |
| if (pdata->num_leds) |
| adp8870_led_probe(client); |
| |
| return 0; |
| |
| out: |
| if (data->pdata->en_ambl_sens) |
| sysfs_remove_group(&data->bl->dev.kobj, |
| &adp8870_bl_attr_group); |
| out1: |
| backlight_device_unregister(bl); |
| out2: |
| i2c_set_clientdata(client, NULL); |
| kfree(data); |
| |
| return ret; |
| } |
| |
| static int __devexit adp8870_remove(struct i2c_client *client) |
| { |
| struct adp8870_bl *data = i2c_get_clientdata(client); |
| |
| adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); |
| |
| if (data->led) |
| adp8870_led_remove(client); |
| |
| if (data->pdata->en_ambl_sens) |
| sysfs_remove_group(&data->bl->dev.kobj, |
| &adp8870_bl_attr_group); |
| |
| backlight_device_unregister(data->bl); |
| i2c_set_clientdata(client, NULL); |
| kfree(data); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message) |
| { |
| adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); |
| |
| return 0; |
| } |
| |
| static int adp8870_i2c_resume(struct i2c_client *client) |
| { |
| adp8870_set_bits(client, ADP8870_MDCR, NSTBY); |
| |
| return 0; |
| } |
| #else |
| #define adp8870_i2c_suspend NULL |
| #define adp8870_i2c_resume NULL |
| #endif |
| |
| static const struct i2c_device_id adp8870_id[] = { |
| { "adp8870", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adp8870_id); |
| |
| static struct i2c_driver adp8870_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| }, |
| .probe = adp8870_probe, |
| .remove = __devexit_p(adp8870_remove), |
| .suspend = adp8870_i2c_suspend, |
| .resume = adp8870_i2c_resume, |
| .id_table = adp8870_id, |
| }; |
| |
| static int __init adp8870_init(void) |
| { |
| return i2c_add_driver(&adp8870_driver); |
| } |
| module_init(adp8870_init); |
| |
| static void __exit adp8870_exit(void) |
| { |
| i2c_del_driver(&adp8870_driver); |
| } |
| module_exit(adp8870_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("ADP8870 Backlight driver"); |
| MODULE_ALIAS("platform:adp8870-backlight"); |